Premium Essay

15 to Finish

In:

Submitted By sheilamaggette
Words 1052
Pages 5
In a recent poll of high school seniors asking how many credit hours per semester they should take when they go to college; more than 50 percent indicated 12 hours as an ideal college course load. Though 12 hours is a full-time course load, it is impossible for a student to earn a bachelor's degree within four years unless a student takes an additional six hours during the summer. The primary route to earning a bachelor’s degree within four years is to successfully complete 15 credit hours per semester, for a total of 30 credit hours annually.

To improve college graduation rates and encourage on-time completion, the state of Georgia has launched 15 to Finish, a proven advisement, retention, progression, and graduation initiative that encourages students to take 15 credits per semester, thereby spending less time and money to earn a degree. The goal of Complete College Georgia and 15 to Finish is to provide better information and educate all students on tuition and fees, graduation rates and job opportunities to ensure successful college completion.

The 15 to Finish initiative is important because many students express a desire to graduate within four years. Colleges are referred to as either four-year or two-year institutions, but most students are taking longer to graduate. In fact, if 100 students entered college today in the state of Georgia, only 11 students would graduate on time at a four-year college and only five would graduate on time at a two-year college (Complete College America, 2011). Full time-students are taking an average of five years to earn a bachelor’s degree and four years to earn an associate degree (Complete College Georgia, 2011). Many students are unaware of the potential consequences that can result from taking fewer credit hours, including a higher likelihood of non-completion, lost wages, and increased college costs.

Similar Documents

Free Essay

Dbms Reviews

...project managment7 days Start Finish Predecessors Nov 8, '15 S M T W T F S Tue 11/10/15Mon 9/3/18 Tue 11/10/15Wed 11/18/15 3 charter 1.5 days Tue 11/10/15Wed 11/11/15 4 scope 1 day Wed 11/11/15 hu 11/12/153 T 5 roles 1 day Thu 11/12/15Fri 11/13/15 4 6 budget 2 days Fri 11/13/15 Tue 11/17/155 1.5 days 1 wk Tue 11/17/15 Mon 11/7/16 Tue 1/31/17 7 8 9 disaster recovery plan networking equipment routers 4 mons Wed 6 11/18/15 Mon 22 2/27/17 Mon 2/6/17 10 10 cabling 2 mons Tue 12/6/16 Mon 1/30/1712 11 access point 1 wk Tue 2/7/17 Mon 2/13/179 12 high speed 1 mon connection spare equipment 2 wks 13 Mon Mon 11/7/16 12/5/16 Tue 2/14/17 Mon 2/27/1711 Task External Tasks Split Project: Project1 Date: Tue 11/10/15 Inactive Summary Manual Task External Milestone Milestone Duration-only Deadline Summary Manual Summary Rollup Progress Project Summary Manual Summary Manual Progress Inactive Task Start-only Inactive Milestone Finish-only Page 1 Nov 15, '15 S M T W T F S Nov 22, '15 S M T ID Task Mode 14 Task Name Duration Predecessors 15 air conditioning 15 days 16 fire suppresion 5 days 17 security 30 days AP layout 10 days wiring 14 days construction 5 mons genorators 15 days Wed 4/6/16 Tue 4/26/16 20 ...

Words: 10668 - Pages: 43

Free Essay

Project Plan

...ID 0 1 2 3 4 5 6 7 8 9 10 11 12 13 Task Name 5/25 June 6/1 6/8 6/15 6/22 July 6/29 7/6 7/13 7/20 7/27 August 8/3 8/10 8/17 8 Guinness World Record for World's Largest Tug of War Tournament 14 15 16 17 18 19 20 21 22 23 1 Initiation 1.1 Hold kick-off meeting 2 Planning 2.1 Security Plan 2.1.1 Identify Potential Security Companies 2.1.2 Prepare notes on companies 2.1.3 Choose security company 2.1.4 Sign Security contract 2.2 Event Location and Permit 2.2.1 Identify potential street locations 2.2.2 Prepare notes on locations 2.2.3 Choose location 2.2.4 Complete and send the Permit Application for City of Toronto 2.2.5 Permit Obtained 2.3 Printing Service 2.3.1 Identify printing services 2.3.2 Prepare notes on printing services 2.3.3 Choose printing service 2.3.4 Sign printing contract 2.4 Tug of War Equipment Plan 2.4.1 Identify potential vendors for equipment e.g. mats, rope, wristbands 2.4.2 Request Proposals 2.4.3 Prepare notes on vendor proposals Task Split External Milestone Inactive Task Inactive Milestone Inactive Summary Manual Task Duration-only Manual Summary Rollup Manual Summary Start-only Finish-only Deadline Progress Project: Guinness World Record fo Date: Mon 10/6/14 Milestone Summary Project Summary External Tasks Page 1 ID 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 Task Name 5/25 June 6/1 6/8 6/15 6/22 July 6/29 7/6 7/13 7/20 7/27 August 8/3 8/10 8/17 ...

Words: 4701 - Pages: 19

Free Essay

Dadfa

...ID 1 Task Mode Task Name Duration Start Finish October 1 Predecessors December 11 11/24 12/29 February 21 2/2 3/9 2 3 4 5 6 7 8 9 10 11 12 13 Acquire Architects and Construction Companies for project Send out RFPs for Architects & Contruction Review Receive and RFPs Choose & Notify Contract Recipients Design Store , Parking Garage and Outdoor Space Review existing blueprints and modify as needed Apply for necessary licenses and permits Licenses and Permits Aquired Build Store & Garden Center Prepare Site for construction Clear foliage and debris Level ground Contruct Store Task Split 8 days Tue 1/14/14 Fri 1/24/14 1 day 4 days 0 days 15 days Tue 1/14/14 Tue 1/14/14 Wed 1/15/14 Mon 1/20/14 Fri 1/24/14 Fri 1/24/14 1/24 Mon 1/27/14 Fri 2/14/14 10 days Mon 1/27/14 Fri 2/7/14 6 days 0 days 175 days 15 days 5 days 6 days 140 days Fri 2/7/14 Fri 2/14/14 Fri 2/14/14 Fri 2/14/14 2/14 Mon 2/10/14 Fri 10/10/14 Mon 2/10/14 Fri 2/28/14 Mon 2/17/14 Fri 2/21/14 Fri 2/21/14 Fri 2/28/14 Mon 3/3/14 Fri 9/12/14 External Milestone Inactive Task Inactive Milestone Inactive Summary Manual Task Duration-only Page 1 Manual Summary Rollup Manual Summary Start-only Finish-only Deadline Progress Project: Team 4 WBS - Draft Date: Tue 1/21/14 Milestone Summary Project Summary External Tasks ID 14 15 16 17 18 19 Task Mode Task Name Duration Start Finish October 1 Predecessors December 11 11/24 12/29 February 21 2/2 3/9 Lay store foundation 10 days Build Structure Shell 61...

Words: 1261 - Pages: 6

Free Essay

Abdul

... |Unit number and title | |BTEC Level 2 Diploma in Engineering |Unit 14 :- Secondary machining techniques | |Learner name | Assessor name | |Abdulrahman mohamed |Adrian Ilsley-Morris | |Date issued | Hand in deadline |Submitted on | |3/6/15 | 29/6/15 |29/6/15 | | | | |Assignment title |Using Secondary Machining Techniques Safely | |In this assessment you will have opportunities to provide evidence against the following criteria. | |Indicate the page numbers where the evidence can be found. | |Criteria |To achieve the criteria the evidence must show that the learner...

Words: 1322 - Pages: 6

Free Essay

Adms 3330 Stat 2

...|Start |Finish |Finish |Slack |Activity | |A |0 |0 |3 |3 |0 |Yes | |B |0 |2 |1 |3 |2 | | |C |0 |1 |2 |3 |1 | | |D |3 |3 |7 |7 |0 |Yes | |E |7 |7 |12 |12 |0 |Yes | |F |3 |7 |6 |10 |4 | | |G |7 |10 |13 |16 |3 | | |H |12 |12 |16 |16 |0 |Yes | 9. a. A-C-E-H-I b. | |Earliest |Latest |Earliest |Latest | |Critical | |Activity |Start |Start |Finish |Finish |Slack |Activity | |A | 0 | 0 | 9 | 9 |0 |Yes | |B | 0 | 9 | 6 |15 |9 | | |C | 9 | 9 |15...

Words: 463 - Pages: 2

Free Essay

Grdg

...TIME AND WORK FORMULAS- 1. Work from Days: If A can do a piece of work in n days, then A's 1 day's work = | 1 | . | | n | | 2. Days from Work: If A's 1 day's work = | 1 | , | then A can finish the work in n days. | | n | | | 3. Ratio: If A is thrice as good a workman as B, then: Ratio of work done by A and B = 3 : 1. Ratio of times taken by A and B to finish a work = 1 : 3. TIME AND WORK PROBLEMS- 1.  | A can do a work in 15 days and B in 20 days. If they work on it together for 4 days, then the fraction of the work that is left is : | | A. | 1 | 4 | | B. | 1 | 10 | | C. | 7 | 15 | | D. | 8 | 15 | | Answer & ExplanationAnswer: Option DExplanation: A's 1 day's work = | 1 | ; | | 15 | | B's 1 day's work = | 1 | ; | | 20 | | (A + B)'s 1 day's work = | | 1 | + | 1 | | = | 7 | . | | | 15 | | 20 | | | 60 | | (A + B)'s 4 day's work = | | 7 | x 4 | | = | 7 | . | | | 60 | | | | 15 | | Therefore, Remaining work = | | 1 - | 7 | | = | 8 | . | | | | 15 | | | 15 | | View Answer Workspace Report Discuss in Forum | 2.  | A can lay railway track between two given stations in 16 days and B can do the same job in 12 days. With help of C, they did the job in 4 days only. Then, C alone can do the job in: | | A. | 9 | 1 | days | | 5 | | | B. | 9 | 2 | days | | 5 | | | C. | 9 | 3 | days | | 5 | | | D. | 10 | Answer & ExplanationAnswer: Option CExplanation:...

Words: 3882 - Pages: 16

Premium Essay

Network Diagram

...Start: Fri 2/1/13 ID: 5 Finish: Fri 2/1/13 Dur: 3 hrs Res: Systems Analyst FS 1.2.1.2 Check gaming consoles Start: Fri 2/1/13 ID: 6 Finish: Fri 2/1/13 Dur: 2 hrs Res: Systems Analyst 1.2.1.3 Check printers FS Start: Fri 2/1/13 ID: 7 Finish: Fri 2/1/13 Dur: 2 hrs Res: Systems Analyst 1.2.2.1 Test shop Laptops/Handhelds FS Start: Fri 2/1/13 ID: 9 FS Finish: Fri 2/1/13 Dur: 1 hr Res: Systems Analyst 1.3.1.1 Run CAT‐5/6 Cables Milestone Date: Sat 2/2/13 ID: 12 1.3.1.2 Install cable sheathing FS Start: Wed 2/27/13ID: 13 Finish: Thu 2/28/13Dur: 2 days Res: Wiring Contractor 1.3.1.3Install CAT‐5/6 connections FS Start: Fri 3/1/13 ID: 14 Finish: Fri 3/1/13 Dur: 1 day Res: Wiring Contractor 1.3.2.1 Connect 40 desktops FS Start: Mon 3/4/13 ID: 16 Finish: Tue 3/5/13 Dur: 2 days Res: Network Technician | 1.3.2.2 Connect 5 printersStart: Wed 3/6/13 ID: 17Finish: Wed 3/6/13 Dur: 1 dayRes: Network Technician | | | | | | 1.3.2.2 Connect 5 printersStart: Wed 3/6/13 ID: 17Finish: Wed 3/6/13 Dur: 1 dayRes: Network Technician | | | | | FS 1.3.2.3Connect 6 gaming consoles FS Start: Thu 3/7/13 ID: 18 Finish: Thu 3/7/13 Dur: 1 day Res: Network Technician 1.3.2.4 Connect T‐3 Modem with Cat‐5 FS Start: Fri 3/8/13 ID: 19 FS Finish: Fri 3/8/13 Dur: 1 day Res:...

Words: 800 - Pages: 4

Premium Essay

Husky Air

...Planning Complete Execute & Control Phase 3 Analysis Collect Information & Requirements Admissions & Requirements Plan Design Page 2 0 days 48 days 1 day 1 day 1 day 4 days ID 13 14 15 16 17 18 Task Mode Task Name Duration System Design Plan Interface Design Milestone: Design Complete Construction Database Creation User Interface Creation Page 3 4 days 3 days 0 days 24 days 4 days 3 days ID 19 20 21 22 23 24 Task Mode Task Name Duration Program Operational Functions Pilot Records Plane Records Patient & Passenger Records Flight Records Medical Facility Records Page 4 17 days 4 days 4 days 4 days 4 days 4 days ID 25 26 27 28 29 30 Task Mode Task Name Duration Reporting Features Milestone: System Creation Testing Test Plan Create Test Plan Approve Test Plan Page 5 1 day 0 days 28 days 26 days 2 days 1 day ID 31 32 33 34 35 36 Task Mode Task Name Duration Create Testing Environment System Test Analyze Results MOV Evaluation Approve Results Milestone: System Fully Functional Page 6 2 days 1 day 2 days 1 day 1 day 0 days ID 37 38 39 40 41 42 Task Mode Task Name Duration Implementation Training Create Training Plan Approve Training Plan Conduct Training Classes Milestone: Employees Fully Trained Page 7 15 days 7 days 2 days 1 day 4 days 0 days ID 43 44 45 46 47 48 Task Mode Task Name Duration System Install Install Approved Install Milestone: System Fully Installed Close...

Words: 1287 - Pages: 6

Premium Essay

Hh6Pl

...heat dissipation and ventilation. Unitized optics guarantees proper trim to housing installation. Tool-less installation adjustability from either outside the housing or inside the housing. 2. MOUNTING BRACKET - Constructed from 16-gauge steel and is supplied with C-channels that are adjustable up to 28". Mounting brackets may be adjusted up to 2-¾" vertically from inside the housing. 3. RETAINING SPRINGS - Precision tooled springs secure trim to mounting frame, for effortless and tool-less installation. 4. JUNCTION BOX/BALLAST - UL and ETL listed for through-branch circuit wiring and has four ½" Universal Technologies or Lutron Electronics. 5. MOUNTING FRAME OPTICS 6. REFLECTOR - Self-flanged .050" aluminum reflector with low iridescent finish. Reflector provides 45-degree lamp-to-reflector image cutoff. 7. GROOVE BAFFLE - Self-flanged one-piece aluminum with concentric rings. Type: A. Height = 5-3/8" B. Trim Aperture = 6-1/8" C. Cut-out = 6-7/8" D. Trim Outside Diameter = 7-3/8" E. Width = 16" F. Length = 12-1/2" 8. LENS - Choice of either tempered clear, tempered prismatic or tempered frosted lens fastened with two torsion springs for easy re-lamping. ETL/UL listed for wet or damp location. LISTING ETL/UL listed for through-branch circuit wiring and damp locations. Wet location only with lens trims. LAMP BASE GUIDE (Sockets will accept all designated lamp bases listed.) Energy Star Qualified Models: 13W 18W 26W G24q-3 GX24q-3 32W GX24q-3 42W 57W 70W HH6PL - ITEM...

Words: 4706 - Pages: 19

Premium Essay

Project Management Ch10

...Project Management, 2e (Pinto) Chapter 10 Project Scheduling: Lagging, Crashing, and Activity Networks 10.1 True/False 1) Finish to start lags are the same as additional activity slack. Answer: FALSE Diff: 2 Section: 10.1 Lags in Precedence Relationships Skill: Factual AACSB Tag: Reflective 2) The least common type of lag relationship occurs when a successor's finish is dependent upon a predecessor's start. Answer: TRUE Diff: 2 Section: 10.1 Lags in Precedence Relationships Skill: Factual AACSB Tag: Reflective 3) Gantt charts cannot depict float. Answer: FALSE Diff: 1 Section: 10.2 Gantt Charts Skill: Factual AACSB Tag: Reflective 4) In order to accelerate completion of a project, the manager must crash critical path activities. Answer: TRUE Diff: 1 Section: 10.3 Crashing Projects Skill: Factual AACSB Tag: Reflective 5) The critical path may not contain a dummy activity. Answer: FALSE Diff: 1 Section: 10.3 Crashing Projects Skill: Factual AACSB Tag: Reflective 6) Quite often the marginal gains in employee productivity decrease dramatically with the increased use of overtime. Answer: TRUE Diff: 2 Section: 10.3 Crashing Projects Skill: Factual AACSB Tag: Reflective 7) Most project management software employs AOA diagramming Answer: FALSE Diff: 2 Section: 10.4 Activity-on-Arrow Networks Skill: Factual AACSB Tag: Reflective 8) AOA is a more useful technique than AON if the project is complex and has many significant milestones. Answer: TRUE Diff: 2 Section: 10.4 Activity-on-Arrow...

Words: 8067 - Pages: 33

Free Essay

Flow Time Slides

...9/28/2015 Flow-Time Analysis Competitive Advantages of a shorter flow time – Shorter response time (both in production and product design) • Easier to respond to market changes • Fast feedback on quality problems • Delayed differentiation (Postponement) – Lower inventory costs (due to Little’s Law) Processing System Inputs Outputs Flow Time Analysis T Flow time = processing time + wait time (total time in the box) Presentation by Adam Fleischhacker Assistant Professor of Operations Management JP Morgan Chase Scholar University of Delaware Theoretical Flow Time is the time to process a typical flow unit assuming NO waiting. Wondershed Inc. : Schematic Representation Flowcharting Activity - Buffer Decision Physical flow Event Punch base Form base Punch roof Form roof Information flow See the total process; a systems view Define flow units and process boundaries Include only the key steps Clarify the level of detail needed. Processes can be broken down into sub-activities. On the other hand, cascading allows several activities to be combined in a single sub-process - Depicts resources required to carry out activities - Identify the processes that need attention (weak points) Start Start Sub assemble base Separate Sheet Activity A Activity B Activity C Assemble Inspect End End 1 9/28/2015 Wondershed Inc. Theoretical Flow Time Finding Theoretical Flow...

Words: 2386 - Pages: 10

Premium Essay

Human Resource Development

...UNIT-1 Type of Machine Bulk Dyeing Machine Sample Dyeing Machine Remarks All are high temperature & high pressure. Turkey High temperature & high pressure. Atmospheric DYEING UNIT-2 Type of Machine Machine Capacity ( Kg ) 1200 1 Dilmenler 2 800 Dilmenler 1 600 Dilmenler 1 400 Dilmenler 1 200 Bulk Dyeing Machine Dilmenler 1000 Dilmenler 1 CONTACT Md.Harun-Or-Rashid DGM Dyeing Cell:01712160578 Email- info@nz-bd.com www.nz-bd.com Document: MIS Page 1 DYEING PRODUCTION PROFILE DYEING FINISHING UNIT-1 Finish Type No. of Machine. Country of Origin Capacity / Day Bianco 1 Italy 6 Ton. Tensionless Drayer LK & LH. 1 Taiwan 6 Ton. Tube Compactor Ferrero 1 Italy 6 Ton. Slitting & Dewatering Open Finish Brand Name Squeezer Tube Finish Name of Machine Bianco 1 Italy 12 Ton. Stenter...

Words: 540 - Pages: 3

Premium Essay

Tfidt

...TASK ONE: Work Breakdown Structure NEW ACTIVITIES Prepared by: Tony Prince Date: 1/11/2015 1.0 Project background Research 2.0 Project Scoping 3.0 Project Proposal Presentation 4.0 Test Past Algorithms 5.1 Test Function word Analysis 5.2 Test WRI 5.3 Test Trigram Markov 5.0 Developing Proposed Algorithms 6.4 Common N-Gram 6.5 Maximal Frequent ward sequence 6.0 Text Classifier 7.6 Dissimilarity Calculation 7.7 Support Vector Machine 7.8 Naïve Bayes 7.0 Testing and Evaluation 8.9 Entering Bugs to the System 8.10 Fault Injection 8.11 Results Analysis 8.0 Comparing Algorithms 9.12 Generating Differentiation Report 9.13 Generating Improvement Report 9.0 Apply to controversies 10.0 Beta In House Launch 11.14 In House User Testing 11.0 Alpha Launch First of all, as we know that the main idea of a WBS (Work Breakdown Structure) is to maintain a proper hierarchy of events that are to be performed throughout the SDLC (Software Development Life Cycle). We have already created a WBS, and added the following Events that will further be assigned Durations and other details, First of all under the Testing and Evaluation four more activities are added, that includes, Entering Bugs to the System, Fault Injection, Results Analysis. Entering Bugs in the system is a way to analyze that our functionality is working fine, not...

Words: 1238 - Pages: 5

Free Essay

Test

...Start Finish May 24, '15 26 30 3 Current Software Technical Documentation Tasks Status Prepare System Requirements Specifications (SRS) for Kidney Foundation Hospital Management System Accommodation Management System Patient Information Management System Outdoor Patient Appointment System Patient Treatment & Follow-up System Patient Payment Collection System Pathology Lab Management System Drug Store Management System User Authorization/Security Management System Review and Update all SRS Documents Update User Manual for Business ERP Procurement management System Inventory Management System Sales Management System Service Management System Return Material Authorization (RMA) Manufacturing Management System Accounting Management System General (System & Setup) Module Review and Update Documents Prepare User Manual for Business ERP HRM Modules Personnel Management Information System (PMIS) 52 days 31 days 3 days 3 days 2 days 6 days 3 days 5 days 5 days 2 days 19 days 7 days 1 day 1 day 2 days 1 day 1 day 1 day 1 day 2 days 6 days 5 days 1 day Mon 6/1/15 Mon 6/1/15 Mon 6/1/15 Sat 6/6/15 Mon 6/8/15 Mon 6/8/15 Wed 6/10/15 Thu 6/4/15 Mon 6/8/15 Sat 6/20/15 Thu 6/4/15 Sat 6/13/15 Sun 6/14/15 Sun 6/14/15 Mon 6/15/15 Sat 6/13/15 Sun 6/14/15 Sun 6/14/15 Mon 6/15/15 Wed 6/17/15 Sun 6/14/15 Mon 6/15/15 Tue 6/16/15 Tue 8/4/15 Tue 7/7/15 Thu 6/4/15 Mon 6/8/15 Tue 6/9/15 Sun 6/14/15 Sat 6/13/15 Tue 6/9/15 ...

Words: 770 - Pages: 4

Premium Essay

Boston Massacre Research Paper

...Quit was not in his blood. He decided to defy the odds and pave his own path of the “American Dream”. Iffrig spent the next year training harder than ever to finish what he started. 2013 was a different race. In just over four hours, Bill Iffrig was just feet from the finish line when a bomb knocked him off his feet. The first of two that devastated him and a host of runners and race observers. A few moments later, Iffrig found himself in a wheelchair surrounded by bystanders with a torn muscle in his thigh. Even an explosion and torn muscle could not stop Bill on that day. “We may be momentarily knocked off our feet, but we’ll pick ourselves up. We’ll keep going. We will finish the race” (Iffrig). Bill stood up out of the wheelchair and continued to walk across the finish line to receive his medal. He earned his victory, finishing the race he trained for hard for. Family, friends, co-workers, stalwarts and encouraging strangers line every inch of the roads of Boston. They are so tight-knit, they are the support net for mentally and physically exhausted runners in every way possible. Water, electrolyte drinks, blow horns, and even cheerful, funny and encouraging signs line the course, providing an additional...

Words: 1916 - Pages: 8