Premium Essay

Bio Test

In:

Submitted By Cpuentes4510
Words 497
Pages 2
The reason why I choose Small Vacuole was because I knew that this was a vacuole but I got confused because I saw that this was large compared to everything else and I remember hearing that the small intestine was larger than the big intestine so I got those two confused as I thought that the bigger one was called small vacuole.

Not only did I learn that the central vacuole is responsible for regulating the waste in a plant cell but also that they are larger in plant cells than in animal cells.

The correct answer was Central vacuole because this picture shows a plant cell and in the plant cell the vacuole is much larger.

E: The reason why I choose chloroplast was because I remember that the chloroplast was small and round so I was confused between the mitochondria and the chloroplast.

I learned that there is a huge difference between the mitochondria and the chloroplast as the function of the mitochondria is to produce ATP and the function for the chloroplast is to get energy from sunlight.

The correct answer was mitochondria because they are open and have string like structure in the inside to produce the ATP.

F: The reason why I choose Golgi apparatus was because I mixed up this and the rough ER because they both have a very similar structure that got me confused.

I learned how to tell the difference between both the Golgi apparatus and the Rough ER. I also learned that the unction of Rough ER is to modify the protein to send off to the Golgi apparatus.
The correct answer was Rough ER because this has to be closer to the nucleus as it has to transfer the proteins into the Golgi apparatus.

G: The reason why I choose Rough ER was because I mixed up this and the rough ER because they both have a very similar structure that got me confused. I learned how to tell the difference between both the Golgi apparatus and the Rough ER. I also learned that

Similar Documents

Premium Essay

Future

...Fall BIOS – Instructor: Mrs. Nicholas – NT1110 – 1 May 2014 Lavon Hawkins BIOS SUMMARY Lavon Hawkins BIOS SUMMARY BIOS BIOS: The BIOS is software which is stored on the motherboard. It tells the computer how to perform a number of basic functions such as booting and keyboard control. It is also used to identify and configure the hardware in a computer such as hard drive, floppy drive, optical drive, CPU, memory and so on. CMOS: The complementary metal oxide semiconductor is the type of semiconductor chip on the motherboard which stores the system information and computer settings such as date, time, hard drive settings, boot sequence, parallel part settings, on-base audio and video etc. Firmware: Firmware is a combination of software and hardware. Computer chips that have data or programs recorded on them are firmware. POST: The POST or power on self-test is a test the computer does when it first boots up. It’s to verify all the hardware is working. If all checks out it usually gives a single beep. If not a beep code could come up. Beep Code: A beep code is an audible code which is generated during the POST (Power On Self Test) when the BIOS has an issue but has not made it all the way up the boot sequence that it can give you the error as a message on the monitor BIOS update: Updating the BIOS can fix or enhance aspects of a computers performance. Or it may provide support for newly installed hardware. 1 Flash BIOS update: A BIOS chip...

Words: 353 - Pages: 2

Free Essay

Information and Communication Technology

...that starts the “chain reaction” which ends with the entire operating system being loaded is known as the boot loader (or bootstrap loader). The term creatively came from early designiners imagining that before a computer “runs” it must have it’s “boots strapped”. The boot loader’s only job is to load other software for the operating system to start. Often, multiple-stage boot loaders are used, in which several small programs of increasing complexity sequentially summon one after the other, until the last of them loads the operating system. Boot Devices The boot device is the device from which the operating system is loaded. A modern PC BIOS (Basic Input/Output System) supports booting from various devices. These include the local hard disk drive, optical drive, floppy drive, a network interface card, and a USB device. Typically, the BIOS will allow the user to configure a boot order. If the boot order is set to: 1. CD Drive 2. Hard Disk Drive 3....

Words: 646 - Pages: 3

Free Essay

Nvidia780I

...User Guide EVGA nForce 780i SLI Motherboard 780i 3-Way SLI Motherboard EVGA ii nForce 780i SLI Motherboard Table of Contents Before You Begin… ..................................................................................................... ix Parts NOT in the Kit .................................................................................................ix Intentions of the Kit ...................................................................................................x EVGA nForce 780i Motherboard..................................................................................1 Motherboard Specifications...................................................................................... 1 Unpacking and Parts Descriptions...............................................................................4 Unpacking ................................................................................................................ 4 Equipment ................................................................................................................ 4 EVGA nForce 780i SLI Motherboard ....................................................................... 5 Hardware Installation ....................................................................................................9 Safety Instructions.................................................................................................... 9 Preparing the Motherboard .........

Words: 12933 - Pages: 52

Free Essay

Information Technology

...BASIC INPUT OUTPUT SYSTEM [BIOS] Seminar Presented by Milind Chile - 2591 Dipti Borkar - 2778 Freddy Gandhi - 2787 Raghav Shreyas Murthi - 2804 Introduction The BIOS, short for BASIC INPUT OUTPUT SYSTEM is a set of built-in software routines that give a PC its personality. Although, less than 32 kilobytes of code, the BIOS controls many of the most important functions of the PC: how it interprets keystrokes (Ctrl + Alt + Delete), how it puts characters on the screen, and how and at what speed it communicates through its ports. The BIOS also determines the compatibility of the computer and its flexibility in use. Although all BIOSs have the same function; all are not the same. The BIOS governs the inner complexities arising out of the odd mixing of hardware and software. It acts as a link between the material hardware of the PC and its circuits, and the transcendent realm of software ideas and instructions. More than a link, the BIOS is both hardware and software. Like software, the BIOS is a set of instructions to the computer’s microprocessor. Like hardware, however, these instructions are not evanescent; rather they are coded into the hard, worldly silicon of PROM, EPROM chips. Due to the twilight state of programs like the BIOS, existing in the netherworld between hardware and software, such PROM-based programs are often termed firmware. The personality comes from the firmware code. This code determines how the computer will carry out the basic functions needed to make...

Words: 6641 - Pages: 27

Free Essay

Lab 7 Troubleshooting

...AMIBIOS is a kind of BIOS manufactured by American Megatrends (AMI). Many popular motherboard manufacturers have integrated AMI's AMIBOS into their systems. The error of six beeps means that there has been an 8042 Gate A20 test error. This beep code is usually caused by an expansion card that has failed or the motherboard that is no longer working. Step 1. Six Beeps- 8042 Gate A20 test error is usually caused by an expansion card failure or that the motherboard that is no longer working. Step 2. Determine if it is the expansion card failure or that the motherboard is no longer working. Step 3. Power on the computer or restart. Listen to beeps very carefully. Step 4. Update the BIOS, replace Expansion Card, and replace the motherboard, if necessary. Step 5. Power on computer after installation of updated BIOS, or the Expansion Card, or the replaced motherboard. Step 6. Ensure to document all processes with outcomes before during and after installation of each program. Phoenix BIOS is manufactured by Phoenix Technologies.The beep codes from a Phoenix-based BIOS may be exactly the same as the true Phoenix beep codes and they may vary. A 1-3-1-3 beep code pattern means that the 8742 keyboard controller test has failed. This usually means that there is a problem with the currently connected keyboard but it could also indicate a motherboard issue. Step 1. 1-3-1-3 beep pattern, it means that ther is a problem with the keyboard or motherboard issue. Step 2. 8742 keyboard controller...

Words: 521 - Pages: 3

Premium Essay

Science

...display anything on the monitor. You see lights on the computer case, probably hear fans running from inside, and may even hear sounds, but nothing at all shows up on your screen. There are several possible reasons why your monitor isn't displaying information so it's very important that you step through an ordered process like the one I've outlined here. Important: If your computer is in fact showing information on the monitor, but is still not booting fully, see How to Fix a Computer That Won't Turn On for a better troubleshooting guide. Difficulty: Average Time Required: From minutes to hours depending on why the computer isn't displaying anything on the monitor How To Fix a Computer That Turns On But Displays Nothing Test your...

Words: 2186 - Pages: 9

Premium Essay

Bio Test Bank

...1) Which of the following statements regarding viruses is false? A) A virus is generally considered to be alive because it is cellular and can reproduce on its own. B) The host cell provides most of the tools and raw materials for viral multiplication. C) Once a person is infected with the herpesvirus, the virus remains permanently latent in the body. D) Viruses can enter a host cell when the protein molecules on the outside of the virus fit into receptor molecules on the outside of the cell. E) Herpesviruses and the virus that causes AIDS can remain latent inside our cells for long periods of time. Answer: A Topic: Opening Essay Skill: Factual Recall 2) Which of the following people conducted the experiments that demonstrated that DNA is the genetic material of bacteriophages? A) Watson and Crick B) Hershey and Chase C) Franklin D) Griffith E) Pauling Answer: B Topic: 10.1 Skill: Factual Recall 3) One type of virus that infects bacteria is called a A) phage. B) mage. C) rhinovirus. D) filovirus. E) coronavirus. Answer: A Topic: 10.1 Skill: Factual Recall 4) When a T2 bacteriophage infects an Escherichia coli cell, which part of the phage enters the bacterial cytoplasm? A) the whole phage B) only the RNA C) only the DNA D) the protein "headpiece" and its enclosed nucleic acid 2 E) the tail fibers Answer: C Topic: 10.1 Skill: Factual Recall 5) The way that genetic material of a bacteriophage...

Words: 604 - Pages: 3

Premium Essay

Operating System

...CMOS A complementary metal oxide semiconductor (CMOS) is a type of integrated circuit technology. The term is often used to refer to a battery-powered chip found in many personal computers that holds some basic information, including the date and time and system configuration settings, needed by the basic input/output system (BIOS) to start the computer. This name is somewhat misleading, however, as most modern computers no longer use CMOS chips for this function, but instead depend on other forms of non-volatile memory. CMOS chips are still found in many other electronic devices, including digital cameras. In a computer, the CMOS controls a variety of functions, including the Power On Self Test (POST). When the computer’s power supply fires up, CMOS runs a series of checks to make sure the system is functioning properly. One of these checks includes counting up random access memory (RAM). This delays boot time, so some people disable this feature in the CMOS settings, opting for a quick boot. If installing new RAM it is better to enable the feature until the RAM has been checked. Ad Once POST has completed, CMOS runs through its other settings. Hard disks and formats are detected, along with Redundant Array of Independent Disk (RAID) configurations, boot preferences, the presence of peripherals, and overclocking tweaks. Many settings can be manually changed within the CMOS configuration screen to improve performance; however, changes should be made by experienced users...

Words: 747 - Pages: 3

Free Essay

Knowledge Assemsment Text Book

...the function of the department. A problem with a computer belonging to a department that is critical to the organization, such as order entry or a customer service call center, should take precedence over a problem with a computer belonging to a department that can better tolerate a period of down time, such as research and development. 2. Place these troubleshooting steps in the correct order, using the procedure described in this lesson as your guide. B, D, C, A. B: Establishing the symptoms is the first step in troubleshooting any problem to determine exactly what is going wrong. D: Select the most probable cause. Once you have narrowed down the possible sources of the problem, you can begin to compile a list of possible causes. C: Test the results. Repeat the procedures to ensure that the trouble has been completely eliminated. A: Document the solution. A technical support organization should have a system in place in which the technicians register each problem call as a trouble ticket that contains a...

Words: 746 - Pages: 3

Free Essay

Bios and Post

...and Logic Understanding The BIOS and POST Student Name Introduction Inside every PC is a BIOS, which stands for Basic Input Output System.  In a nutshell, BIOS is software that interacts between a computer’s hardware and the operating system and software applications.  There are several types of BIOS', ranging from the motherboard ROM BIOS to adapter BIOS' such as video BIOS, drive controller BIOS, network adapter BIOS, SCSI adapter BIOS, etc... These BIOS' are the lowest level of software in a computer providing a set of small programs or software routines that allow the hardware of a computer to interact with the operating system by a set standard. The Boot Process To get to the operating system, a computer must first boot from the BIOS.  The BIOS performs a number of tasks when a computer is started.  From initializing the microprocessor to initializing and testing hardware to starting the operating system.  Starting a computer is not a simple task.  It's a methodical process that is performed every time power is applied to a computer. This process will vary with different computers and different BIOS', but the overall goal is the same. When you first turn on a computer the very first operation performed by the CPU is to read the address space at FFFF:0000h. This address space is only 16 bytes, which is not nearly enough space to house the BIOS found on a motherboard.  Instead, this location contains a special instruction...

Words: 1259 - Pages: 6

Free Essay

Memoir

...use rom for the bios and not rom? It is necessary to use ROM for the bios because the data in the RAM is cleared when the computer shuts down, but the data in the ROM is always there for the bios to use. Bios is typically placed in a ROM chip that comes with the computer. This ensures that the bios will not be damaged by disk failures. It also makes it possible for a computer to reboot itself. Read-only memory is computer memory on which data has prerecorded. Once data has been written onto ROM chip, it cannot be removed and can only be read. How do the post beep codes make troubleshooting a computer start-up problem easier? The computer power-on self- test also known as (post). It tests that the computer has to make sure it meets necessary system requirements and that all hardware is working properly before starting the reminder of the boot process. If the computer passes post the computer gives a single beep (with some computer bios manufactures it may beep twice) as the computer starts and the computer will continue to start normally. However, if the computer fails the post the computer will either not beep at all or will generate a beep code, which tells the user the source of the problem. Why is the hard disk busy when performing a cold boot? The hard drive has to load the system files and kernels then the operating system. How can you recover your system from a failed bios update? It is two options: you can install a replacement bios chip (if the bios is located in...

Words: 309 - Pages: 2

Free Essay

Technical

...BIOS (basic input/output system) is the program a personal computer's microprocessor uses to get the computer system started after you turn it on. It also manages data flow between the computer's operating system and attached devices such as the hard disk , video adapter , keyboard , mouse , and printer . BIOS is an integral part of your computer and comes with it when you bring it home. (In contrast, the operating system can either be pre-installed by the manufacturer or vendor or installed by the user.) BIOS is a program that is made accessible to the microprocessor on an erasable programmable read-only memory (EPROM) chip. When you turn on your computer, the microprocessor passes control to the BIOS program, which is always located at the same place on EPROM. When BIOS boots up (starts up) your computer, it first determines whether all of the attachments are in place and operational and then it loads the operating system (or key parts of it) into your computer's random access memory (RAM) from your hard disk or diskette drive. With BIOS, your operating system and its applications are freed from having to understand exact details (such as hardware addresses) about the attached input/output devices. When device details change, only the BIOS program needs to be changed. Sometimes this change can be made during your system setup. In any case, neither your operating system or any applications you use need to be changed. Although BIOS is theoretically always the intermediary...

Words: 821 - Pages: 4

Free Essay

Ami Beep Codes

...Version 2.0 – June 10, 2008 American Megatrends, Inc. Checkpoint & Beep Code List 2.0 Copyright (c) 2008 American Megatrends, Inc. All Rights Reserved. American Megatrends, Inc. 5555 Oakbrook Parkway Suite 200 Norcross, GA 30093 (USA) This publication contains proprietary information which is protected by copyright. No part of this publication may be reproduced, transcribed, stored in a retrieval system, translated into any language or computer language, or transmitted in any form whatsoever without the prior written consent of the publisher, American Megatrends, Inc. American Megatrends, Inc. retains the right to update, change, modify this publication at any time, without notice. For Additional Information Call American Megatrends BIOS Sales Department at 1-800-828-9264 for additional information. Limitations of Liability In no event shall American Megatrends be held liable for any loss, expenses, or damages of any kind whatsoever, whether direct, indirect, incidental, or consequential, arising from the design or use of this product or the support materials provided with the product. Limited Warranty No warranties are made, either express or implied, with regard to the contents of this work, its merchantability, or fitness for a particular use. American Megatrends assumes no responsibility for errors and omissions or for the uses made of the material contained herein or reader decisions based on such use. Trademark and Copyright Acknowledgments All product names used in...

Words: 3575 - Pages: 15

Free Essay

Basic Security

...Introduction The BIOS performs a power-on self-test when the system is turned on. This test is used to ensure that the system is functioning properly and to gather information about what the system contains. When a problem is identified with the system during the POST, the BIOS will normally produce an error message. However, in some cases the problem is detected so early in the test that the BIOS cannot access the video card to print the message. In this case the BIOS will produce a beeping pattern on the speaker to tell you what the problem is. The exact meaning of the beep codes depends on the type and version of BIOS that you have. The most popular types of BIOS are those made by Award American Megatrends (AMI) and Phoenix. AMI 6 Beeps: Keyboard controller / gate A20 failure The keyboard controller is a chip on the motherboard that communicates with your keyboard. It also controls the A20 gate that provides access to the high memory area (HMA). This component is indicating a failure. This is a problem with either the keyboard or the motherboard. Phoenix 1-3-4-1 Test 512 base address lines. Sometimes a memory stick can become loose causing the computer to be unable to read the memory or get errors as it's reading it. Try fixing this issue by opening the computer removing each of the memory sticks you have in the computer and then placing them back into the slots, reset the memory and restart the computer. If this doesn’t work replace the memory. Basic Security Hardware ...

Words: 962 - Pages: 4

Free Essay

Gpu Flashing

...flashing the BIOS. Use the guide and the BIOS files at your own risk, this will void your warranty. What you need: GPU-Z, Nvflash The following guide is for single GPUs. If you wish to flash multiple cards please do so one at a time or see the Nvflash readme for further instructions on how to use the commands to properly flash multiple card systems. Don't type in the bracket but type in the info in the brackets. The commands are case sensitive and you need to include the spaces, please be accurate. 1. Backup your old BIOS (GPU-Z, BIOS version field, button on the right allows you to save the current bios). Keep the old bios in the event that something happens during the flash. 2. Download the new BIOS you'll be flashing to, it should be a.rom file, otherwise the flash will not work. 3. Browse to your Nvflash folder 4. Transfer the new BIOS file into the Nvflash folder 5. Close all unnecessary programs 6. Shift + right-click the Nvflash folder 7. choose the open in command line option 8. Type in the command: Nvflash --protectoff (case sensitive, please be accurate) 9. Type in the command: Nvflash -4 -5 -6 [yourbiosnamehere].rom 10. If the flash is a cross vendor one you might have to type in y a couple of times when asked to 11. Nvflash will work for a while and close the 2nd command prompt after finishing 12. Reboot 13. Your card should now be flashed, test with Precision X or afterburner to see if the BIOS is stable for...

Words: 554 - Pages: 3