...Inventec Corporation Case Study Inventec Corporation lies in the ODM industry which designed and manufactured electronic products for client companies that marketed the products globally. Despite its growth and size, Inventec is not very profitable for the following reasons. To begin with, the ODM industry’s average profitability is low. Net margins of leading taiwan ODM companies range from 1% to 6%. The low profitability is mainly driven by the huge customer bargain power and the fierce competition. ODM’s clients, these global electronic companies face fierce competition themselves and have a need to lower cost. Their strategy to diversify contract manufacturing partnerships reduces their reliance and increase negotiation power against ODM industry. Consolidation within OEM industry further gave them greater bargaining power over the segmented ODM. The fierce competition from both existing competitors in ODM industry and the substitute EMS industry further drives the profitability low. The large manufactory capacity has resulted in ODMs competing with each other for more market shares, which pushed the price down. EMS also provides clients manufacturing, sourcing, procurement, inventory management services. EMS usually doesn’t maintain Intellectual Property and are not likely to compete with OEM clients. This has made them an attractive substitute for those OEM clients who want the design of product to be customized and confidential. In...
Words: 760 - Pages: 4
...1. Inventec was deeply committed towards increasing its market share in the mobile phone segment, but had to contend with a high channel development and alliance cost. Lower levels of brand awareness, and missing consumer information compounded Inventec’s problems of enhancing sales volume and market coverage. From analysis of accounting information: * Comparing with the others leading Taiwan Original Design Manufacturers in 2005, Inventec has a low net income figure of 59m while three of them are over 250m, also gaining a negative income growth in the leading manufacturers in this industry. * Its dominate product is NB PC, which occupies 80 per cent of its products, however this product does not contribute to the revenue growth at all with only servers contribute to 19 per cent. We can interpret from this is that Inventec’s NB PC product is not competitive among the leading manufacturer industry. Others perspectives: * Underutilization of China plants * Electronics manufacturing services take a large stake in the manufacturing industry. High margin products in server market, which will be the commodities tomorrow * Holding a client’s inventory and taking on an additional risk * Small ODM sector had grown more steadily * Increasing competing for the same client base between ODM and EMS companies * EMS providers offered production site closer to the final market, global lofistics and integrated IT services comparing to ODM provider, which may...
Words: 577 - Pages: 3
...About Inventec Corporation “Founded in 1975, Inventec has enjoyed a leading reputation in Taiwan’s electronics and technology industries. Starting out as a manufacturer of electronic calculators, Inventec has moved forward into the design and manufacturing of high-tech products such as notebooks, enterprise servers, storage products, wireless communications, network applications, consumer mobile devices, consumer electronic devices, and wireless solutions. Currently, the annual production capacity of notebooks exceeds 30 million units, over 3 million servers and 5 million smartphones. Being the biggest server ODM and one of the top 4 notebook makers worldwide, Inventec 08’ revenue has reached 10 billion with growth rate over 33%” (www.inventec.com). As Taiwan’s leading Original Design Manufacturer (ODM), Inventec’s reputation for success is apparent. Areas of achievement include development and production in software, notebook PCs, Servers, and consumer electronics such as PDAs, MP3 players, and mobile telephones. Inventec continues to progress in the $190 billion contract manufacturing industry, while working with large Original Equipment Manufacturers (OEM) such as Hewlett-Packard, Dell, Apple, and Palm. Inventec serves alongside the Electronics Manufacturing Services (EMS) industry which offers opportunities to broaden their product scope and remain competitive with other EMS firms. Inventec also has their own brand of products and software which may result to them...
Words: 1731 - Pages: 7
...With these developments, it is obvious that conflicts between parties of different nationalities occur and liability to tax on income of foreigners especially among those engaging in trading venture. Whilst the laws affecting domicile and residence may be sufficiently settled, it is paramount for courts to pursue a detailed analysis to ascertain specific preliminary issues so as to avoid controversial rulings. Courts often handle numerous financial cases that involve what can be best described as foreign or international elements. In such cases, court must decide whether it has the jurisdiction under the Family Law Act 1975 to make a decision on such cases. In the event that it is determined that the court is invested with the jurisdiction to determine the case, the court has to consider whether there is a system of law in foreign country that also has the jurisdiction to handle the case. As it was addressed in the case Attorney General of New Zealand v Ortiz [1984] AC 1, these benefits and costs to either party if the case resolution is made in foreign country as compared with the apparent country should also be a subject of concern. [1] Legal systems in most countries around the world adopt community property regime, which takes effect at the inception of marriage or at the time of divorce. For instance, California and Massachusetts in the United States have adopted community property regimes that support equal division of assets upon divorce. However, this provision...
Words: 659 - Pages: 3
...Adapted from Bernhardt & Kinnear (1988). Cases in marketing management, pp. 6-16. Plano, TX: Business Publications, Inc. Pay careful attention to the following points. They are often used by instructors to evaluate either a written or oral analysis. 1. Be complete. Each area of the situation analysis must be discussed, problems and opportunities identified, alternative presented and evaluated using the situation analysis and relevant financial analysis, and a decision must be made. An analysis that omits part of the situation analysis or only recognizes one alternative is not a good analysis. Second, each area must be covered in-depth and within insight. 2. Avoid rehashing case facts. Every case has a lot of factual information. A good analysis uses facts that are relevant to the situation at hand to make summary points of analysis. A poor analysis just restates or rehashes theses facts without making relevant summary comments. 3. Make reasonable assumptions. Every case is incomplete in terms of some piece of information that you would like to have. A good case analysis must make realistic assumptions to fill in the gaps of information in the case. For example, the case may not describe the purchase decision process for the product of interest. A poor analysis would either omit mentioning this or just state that no information is available. A good analysis would attempt to present this purchase decision process by classifying the product and drawing upon real life...
Words: 487 - Pages: 2
...are given. It is understandable then that we should seek out more opportunities to apply our skills and make more positive impacts within our jurisdictions. It is this general attitude that led us to get involved in investigating cold cases. How We Got Started Mark had, for several years, been consulting with our Coroner’s Division as a forensic anthropologist. During this time he came to learn that there were numerous coroners’ cases in which the identity of the decedent was unknown. These cases were kept in three-ring binders on a shelf in the Sergeant’s office. Over the years, in the course of this forensic work, we would discuss these cases and the progress that was being made on them. The conversation usually ran along the lines of us asking “any luck with that 1980 homicide victim?” and the sergeant answering “well, we’ve gotten so many new cases that I haven’t been able to even look at it yet.” This went on for a few years and through two different sergeants. One day we, as a crime analysis unit, were brainstorming about how we could broaden our “client base”, as it were. We had been successful in integrating ourselves into our Investigations Bureau and had been involved in numerous major cases. And, of course, we had always been active in producing tactical and strategic analyses for our patrol personnel. But we knew that we could be doing more, particularly given the size and responsibilities of our agency. It was during...
Words: 412 - Pages: 2
...BUSINESS CASE Presented to the Accountancy Department De La Salle University In partial fulfillment Of the course requirements In ACCTBA2 (C33) March 2, 2015 A stakeholder is typically concerned with an organization delivering intended results and meeting its financial objectives. In general, a stakeholder can be one of two types: internal (from within an organization) or external (outside of an organization). The stakeholders in this situation are Lanie Marquez and Tim Rodriguez who are also partners in the retail distribution business and their capital contributions are as follows P500,000 and P300,000 respectively they are an internal stakeholder since they are also the owners. The total Capital of both stakeholders is P800,000 and with a monthly salary for both partners at P15,000 on the assumption that both of them will contribute to manage the business equally. Assuming that both managed the business equally the total salary for the year for Lanie and Tim are P180,000 each. They share profit and loss equally and no interest will be given on capital contributed. The problem for this situation is that Lanie is starting to get concerned with the behavior of her other partner Tim. He only manages the business 50% of the time, which will mean that his salary of P15,000 will need to decrease by also 50% since he does not manage the business equally with his partner. The business has seen a downturn in the profit outcome and for the current financial...
Words: 758 - Pages: 4
...Ralph’s Grocery and United Food and Commercial Workers Union The case that I chose for the week 6 critical thinking assignment concerns Ralph’s Grocery Company, located in California. It applies to this week’s material due to the fact that the case involves unlawful suspension and discharge of an employee, as reviewed by the National Labor Relations Board. Background In May 2011, Vittorio Razi was an employee at Ralph’s Grocery and was suspended and terminated after he refused to take a drug test without first consulting with his UFCW Local 324 representative. The company (Respondent) says that on the day in question, Razi’s behavior was in question, acting nervous, anxious, agitated, and slurred speech. After a couple managers discussed the...
Words: 750 - Pages: 3
... Many people wonder why their own teeth stain so easily. The enamel on your teeth and chromogens are what stains your teeth, but what exact beverage stains teeth the most? I chose this topic because I was curious to know what stains teeth the most. It affects us daily because it could rot your teeth or you can’t pick up hot chicks anymore. So what causes teeth to stain? The temperature causes teeth to expand or contract making it easier for stains. So hot and cold drinks affect that. Color in foods and beverages come from chromogens. Chromogens are intensely pigmented compounds that stick to teeth enamel. Chromogens cause a lot of trouble when they mix and react with other stain causing and stain promoting factors. Tannis may be natural or synthetic tannis is another factor that stains teeth. Tooth enamel is porous making it extremely susceptible to stains. The darker the liquid the darker the stain. There are some examples that stain teeth. Not only sodas bad but also Gatorade. Beets are bad for you also. Mostly cause they’re concentrated. Berries dark skins stain teeth. Ketchup is also really bad because of its bright red color and high levels of acid. Dark liquids and sauces you put on your foods also stain teeth. Colored candy and popsicles both contain colorants that will transfer to the teeth and embed in the porous enamel. Fruit juices, especially grape and cranberry, leave a colorful tinge on the teeth and tongue. Colored sodas instantly discolor teeth. The citric acids...
Words: 594 - Pages: 3
...efficient investigative products and services. As a result, the coverage requirements for ANACI and NACLC investigations have been enhanced to support a common content baseline for all agencies. Note that these enhancements apply only to those ANACI and NACLC cases submitted on an SF 86. The purpose of this FIN is to provide you with information concerning what case coverage changes have been made. The case price adjustments necessary to support these changes will be reflected in the FY 2007 case prices. ANACIINACLC Cases Currently, listed and developed issues which are identified in ANACI and NACLC cases (for non-DoD customers) are not pursued beyond the normal scope of the investigation. These cases are returned to the requesting agency so that the agency may decide whether to adjudicate the case based upon the information in hand, conduct additional follow-up themselves, or request a Reimbursable Suitability Investigation (RSI) from FISD to cover the additional issues. Beginning with FY 2007, expansion of these issues will become a standard part of both the ANACI and NACLC products. Effective October 1, 2006, issues apparent at scheduling or developed during the course of the investigation and which fall within the 5-year case coverage period, unless otherwise noted, will be expanded upon according to the following chart (exception: issues which are known to have been covered in previous investigations, or which would reasonably have been expected to...
Words: 772 - Pages: 4
...find that you would like even more time. I recommend that you enter the exam promptly since I will make deductions for those exceeding the 9:00 o'clock end time even if you enter late. Third, know that the legal reasoning essay will come from Module 4 on immunity. The variety of scenarios in that question will force you to think about and explain the nuances between sovereign and personal immunity, between absolute and qualified immunity, about loss of immunity, etc. You will want to understand all four cases from that module well before the exam. I will expect specific citations to the cases and the principles that they enunciate. An additional case that might be useful for you to look at is Canton v. Harris. A second question will address the rulemaking process and the principles underlying it. You should "walk into" the exam (in a virtual sense) with a clear sense of a fully articulated rulemaking process, so that you can pick and choose elements as appropriate in the case you will be presented. The third question will be drawn from the text regarding the Constitutional framework. Finally, remember that "open book" exams can be as challenging as closed book because the "bar" (the expectation) is higher. I think you will find that prior preparation will make a good deal of difference. As stated before, when you open the exam, answer the questions initially in word and copy it back to the exam. That way, you will not lose work, time...
Words: 342 - Pages: 2
...in which it is acceptable for anyone who has suffered a personal injury to seek compensatory damages through litigation from someone connected with the injury. It’s the idea that for every accident someone is at fault. For every injury, there is someone to blame. And, perhaps most damaging, for every accident, there is someone to pay. There are so many ridicilous cases througout history where people sue somebody or some company for no reason and get a lot of money from them. For example . A caretaker fell off a ladder and sued the local authority for not training him to use a ladder - and won.He could get up to 50.000 pounds compensation. One former ex policeman received nearly £90,000 compensation for the trauma of seeing a woman die after he crashed into her car during a 999 call .The husband of the woman killed by the policeman received £16,000 compensation. Policemen cause a tremendous number of accidents - so many, indeed, that one force has stopped its drivers from speeding. The effect is damaging to society. The courts become clogged up with greedy people out for themselves, many with no real case at all while other people with real compensation claims, the people disabled in accidents, crippled in operations or people who have lost loved ones due clear negligent behavior. All the other who just sue somebody with ridicilous acusations should be ashamed of themselves and I hope that in the future others avoid trying to cash in just because it seems so easy...
Words: 266 - Pages: 2
...Case - Swisher System Corporation I. Company Background: Swisher Systems Corporation (SSC) is an industrial heating company which was established in 1949. SSC is an innovator of flexible heating products, especially with its knit and braided heating element. The heating element is multi-stranded resistance wire that is knit and braided with fibreglass and is the base technology for almost all SSC products. SSC is known in the industry as being the highest quality flexible heat supplier which produces control devices and heating cable. SSC’s competitive advantage is on the quality products which maintains higher and safer temperature that are more flexible than their competitors or other products in the market. II. Facts of the Case: A. Mike Watkins Director of Purchasing for Swisher Systems Corporation Solely responsible for purchasing all materials of SSC. Has various experiences in material management prior to SSC. Has more than thirty-five (35) years of industrial purchasing experience. B. Products at Swisher Systems All SSC products are solutions to industrial heating applications SSC manufactures fifty percent (50%) standard products and fifty percent (50%) custom orders. o The custom products can be applied to virtually all industries that require heating products. Industries like semi-conductors, food processing, medical, petrochemical and others. Biggest contributor of SSC’s sales is the cloth heating jacket, though expensive...
Words: 296 - Pages: 2
...certify that I am the author of this paper and that any assistance I received in its preparation is fully acknowledge and disclosed in the paper. I have also cited any sources from which I used data, ideas of words, whether quoted directly or paraphrased. I also certify that this paper was prepared by me specifically for this course. Student Signature: z ******************************************* Instructor’s Grade on Assignment: Instructor’s Comments: The cases that we analyzed as a group as part of the class requirements were very interesting. I was able to relate to both cases especially due to the company I work for. Case number 1, was related on how to survive and adapt to a new market place. As the company I work expands, it continues to navigate and explore new markets with the different products it manufactures. Case number 2, concentrated on how pay attention to contracts and making sure one does its homework before making any type of decisions. I was able to learn from both cases different type of information system solutions and how to manage it. The group projects were very helpful by allowing us to learn how to communicate and work together as a long distance team. It was very hard at first, especially because one of the team member drop the course one week before our first project was due. However, we shined as a group and we were able to complete the project in a timely manner. I learned that the best way to get a long distance project done is...
Words: 461 - Pages: 2
...Final Case Brief FACTS: Claude D’Unger worked for the Ed Rachal Foundation. This foundation owned a ranch that shared a border with the Rio Grande. Frequently, migrants would cross through the ranch. D’Unger suspected that another ranch employee was harassing migrants. Despite being told by his CEO to drop the issue, D’Unger contacted the authorities. It came out that there was no crimes committed, and D’Unger was fired as a result of his actions. Claude D’Unger claimed that the Foundation had breached its contract and that he had been wrongfully terminated and sued on these grounds. He also sued his CEO, Paul Altheide, claiming he had commited tortious interference. The county judge who reviewed his case ruled in favor of D’Unger, but a court of appeals reversed the breach of contract and...
Words: 422 - Pages: 2
