Free Essay

Lighting System

In:

Submitted By charmtan
Words 740
Pages 3
Charmine Tan | 2011-16525

Arch 143 | Prof. Bo-Ot

Lighting System
Different lighting system are utilize for different spaces and functions. Instead of installing or changing lighting systems at once, it is more cost effective to have single lighting system that is flexible enough to accommodate multiple user needs.
In general, the lighting system utilized demonstrates uniform lighting and accent lighting.
These lighting systems may be used alternately or both at the same time.
Uniform lighting is ideal for activities that require visual attention such as reading, writing or simple open gathering with family or guest. This may function well earlier in the night when users tends to wrap up their day, do homework, prepare for dinner and so on. Alternately for later in the night with less demanding visual task, accent lighting may be turned on to set mood and a soothing ambience. This is achieved with warm light perfect for relaxation and unwinding with activities such as chatting, drinking, watching movies and so on.

Exterior Lighting

Most space in the exterior setting does not require great visual attention but it is ideal to have good lighting system to improve visibility for the purpose of security. Additionally bollards are installed along the driveway for efficient lighting on the level of the car.

White light is utilize for visibility and sufficient lighting necessary for visual outlook as well as visually demanding task such as garage works and climbing the stairs. Spot light may also be turned on for additional lighting needs specifically on the stairs for a more safety ascend or descend.

Exterior:
Cool white lights for the adequate lighting for basic task and security.

Distributed warm yellow lights are installed as an alternative lighting system for subtle transition during the night. Additionally it is easier and more comfortable in the eyes but is reinforced with clear lights for visual security.

Exterior:
Cool lights for basic task are highlighted by warm light for accent as well as inviting tone.

Page 2 of 7

The mixture of the white and yellow light is observed on the garage area when both lights are turned on at the same time. It creates a softer glow and balances out the dark spots visible when only the yellow lights are on. It demonstrates how the lighting system may be use independently and still better when use simultaneously.

Exterior:
All light are turned on, cool lights for visual tasks and warm light for emphasis and ambience.

Interior Lighting
Uniform lighting is created with equally spaced lighting fixture ideal for daily activities that requires visual attention. Specially designed for early in the day when families get ready for the day or early in the night when they wrap up the day finishing work and school activities or for casual talks and gathering with family and/or guests. Added cove lighting is installed to reflect light on the working table.

Page 3 of 7

Interior – Living Area:
Flush mount lights only for uniform lighting and minimal accent light on wall. Suspended lights are off. Ideal for general activities and visual tasks.

Alternative mood lighting for late night gatherings and casual talks are designed to create soft lighting ideal for relaxation encouraging light mood and cozy ambience. It is achieved by using suspended luminaire for greater light exposure and translucent casing to sofen light glow.

Interior – Living Area:
Suspended lights and accent lights only for emphasis and mood setting. Ideal for intimate talks and gathering and minimum visual task required.

Page 4 of 7

Both lighting system may be used independently as shown or both at the same time if needed both for visual task and mood setting.

Interior – Living Area:
Flush mount, pendant light and accent light are all turned on. Creates a mood while allowing for demanding visual tasks. Additional Interior Renderings

Interior – Dining and Kitchen Area:
Flush mounted white light for uniform lighting. Ideal for general tasks like food preparation serving and eating, as well as casual talks and gatherings.

Page 5 of 7

Interior – Dining and Kitchen Area:
Suspended lights only for mood setting, ideal for intimate occasions or meals

Interior – Dining and Kitchen Area:
Suspended lights reinforced with flush mounted white light to achieve mood will providing necessary lighting for minimal visual tasks.

Page 6 of 7

Interior – Dining and Kitchen Area:
Another lighting system with wood floor finish

Interior – Living Area:
Another lighting system with wood floor finish

Page 7 of 7

Similar Documents

Free Essay

Term Paper

...Lighting for Results The goals of any interior retail lighting system are often the same: to attract and guide customers, to help them evaluate merchandise and to assist them in quickly and easily completing the sale. If done correctly, lighting has been proven to increase merchandise sales. The Guiding Light While lighting must attract customers to the retail space, it must enable customers to read signage and move throughout the store. The quantity and quality of the illumination will create a lasting impression and will help customers decide whether they want to return to the store in the future to shop. The Buying Decision Customers will not make a purchasing decision until they have the opportunity to evaluate merchandise and determine its specific attributes, such as color, texture and quality. Illumination must be sufficient so customers can read price tags and all labels. In facilities such as clothing stores, the lighting must be sufficient in sales areas and dressing rooms so customers can see how the items look before they purchase them. It’s a Sale! The lighting within a store must facilitate customer transactions. Once customers make a final decision, they must be able to easily locate the sales register. The lighting should also help sales personnel quickly ring up the sale, scan credit cards and wrap packages. Good lighting will help minimize returns since customers can fully evaluate merchandise in the store and...

Words: 1247 - Pages: 5

Free Essay

Review of Related Lit

...July 2002 • NREL/TP-550-30769 A Literature Review of the Effects of Natural Light on Building Occupants L. Edwards and P. Torcellini National Renewable Energy Laboratory 1617 Cole Boulevard Golden, Colorado 80401-3393 NREL is a U.S. Department of Energy Laboratory Operated by Midwest Research Institute • Battelle • Bechtel Contract No. DE-AC36-99-GO10337 July 2002 • NREL/TP-550-30769 A Literature Review of the Effects of Natural Light on Building Occupants L. Edwards and P. Torcellini Prepared under Task No. BEC2.4002 National Renewable Energy Laboratory 1617 Cole Boulevard Golden, Colorado 80401-3393 NREL is a U.S. Department of Energy Laboratory Operated by Midwest Research Institute • Battelle • Bechtel Contract No. DE-AC36-99-GO10337 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States...

Words: 23650 - Pages: 95

Free Essay

Changing Your Home for the Better

...in the Midwest, we are at the center of our global warming problems and can be at the center of our solutions (“Global Warming Solutions A Basics.”, n.d.). Just making relatively small changes in your homes can make a huge impact on global warming if everyone makes similar changes. A new heating and cooling system is one of the biggest upfront costs for a green change, but it has the biggest return as well; in the form of money saved and lessening pollution. “As much as half of the energy used in your home goes to heating and cooling. So making smart decisions about your home's heating, ventilating, and air conditioning (HVAC) system can have a big effect on your utility bills” (“Heat & Cool Efficiently,” n.d.). Which is why you should start with this change. Although simply replacing your system all together could be the most cost effective and energy efficient choice. An alternative choice is using a programmable thermostat. Using a programmable thermostat can improve efficiency of an older system and save you money on utility bills and cut down of the amount of energy used to power your home. This type of thermostat works with your existing heating and cooling system. It uses pre-programmed setting to know when to run or...

Words: 967 - Pages: 4

Premium Essay

Innovation

...Case Studies Radical innovation at Philips Lighting 1.0 Introduction To state the obvious, radical innovation isn’t easy. It involves taking a leap into the unknown – and is particularly difficult for established organizations who have a track record of success which they don’t want to put at risk. So how does an organization jump the tracks? How can it switch off its immune system and open itself up to new – and potentially dangerous – inputs? How can it reframe, let go of its old ways of looking at the world and take on something which is very new – but by definition untried and risky? These are not academic challenges but the very stuff of innovation management – the essence of what it means to lead strategically. Put very simply, innovation is a survival imperative. If organizations don’t change what they offer the world – products and services – and the ways in which they create and deliver those offerings (processes) then they risk being left behind and at the limit disappearing. History shows us an almost Darwinian pattern of the rise of new entrepreneurial and agile organizations which mature, become comfortable and then fat and gradually lose their edge. Middle age gives way to a kind of sclerosis where change is reduced to smaller and smaller increments until one day the organization is upstaged by external events and unable to move fast enough to cope. It is the new kids on the block who exploit the new technology, pick up on the new market...

Words: 9774 - Pages: 40

Premium Essay

Ldr Research Paper

...I. Introduction Common household lighting has evolved from oil and gas lamps in the 17th and 18th centuries to electric lamps in the late 19th century. Electric lamps have since progressed from incandescent to fluorescent to mercury vapor (MV). Today high intensity discharge (HID) lamps dominate street lighting installations. Two HID lamp types predominate: high pressure sodium (HPS), noted for its yellow/orange light, and metal halide (MH) that emits a bright light. Recently the trend has been to convert to LED fixtures because of documented savings on energy use and life-cycle maintenance costs. In our technology today, one of the most useful devices to be invented is the “Night Detector Lights”. This device is off used in special facilities and even in common households. This device give luminance in the sight of darkness, it is after all a night detector. A. Background “Night Detector Lights” are extremely useful and versatile in a wide range of renewable energy projects from automatic lighting to security systems. This circuit uses a light dependent resistor to detect luminance in the surroundings to prevent the circuit from giving power to the LED/Bulb for it to illuminate. The light dependent resistor (LDR) converts the light it absorbs into heat that then signals the resistor when gathered enough heat to cut off the flow of electricity to its destination the LED/Bulb. This may sound complex but it is rather simple. The LDR represents the switch of the circuit as...

Words: 311 - Pages: 2

Free Essay

Unknown

...Automotive Industry Lighting by Philips Lighting lighting solutions that really last The ever-growing automotive industry covers an extremely wide range of different work conditions: from small workshops to huge factory halls, from the fine precision work to heavy industrial tasks. Philips offers a range of luminaires designed to provide optimal lighting solutions for such conditions. Lighting solutions that not only enhance efficiency but solutions that really last. Proper construction of a vehicle often requires careful inspection at every step of the production process, with each step demanding very specific lighting conditions. production basics There are six main phases in the production of a vehicle: stamping, body-in-white (B I W ) assembly, paintwork, engine assembly, final assembly and car testing and delivery. Stamping This is the process by which parts (bodies, doors, bonnets, floor pans) are cut out of sheet metal. Completely automated-machines known as transfer presses perform all the work of cutting and shaping the metal. Body-in-white assembly This is the assembly-line operation during which all the various parts are put together and then welded to make the “shell” either by semi- or fullyautomated machinery. Paintwork Here too, the lines are automated to reduce waste and pollution. The body shell is cleaned, dipped in Final assembly During final assembly, all the remaining parts of the car are put together: seats, wheels, engine, dashboard and so...

Words: 4029 - Pages: 17

Free Essay

Collabaration and Innovation at Procter and Gamble

...Guidelines Like traditional lighting equipment, solid-state lighting (SSL) products sold in the United States are subject to industry standards governing safety and performance. This fact sheet lists the key guidelines as well as performance and safety standards that are applicable to SSL products, including those utilizing light-emitting diodes (LEDs). The use of national standards and test methods improves consistency of performance and facilitates product comparisons, thereby increasing consumer confidence and satisfaction. As the technology matures, standards and guidelines are created or revised as needed. The documents listed here are those applicable in North America and completed as of October 2011.1 ANSI/ANSLG American National Standards Institute/American National Standard Lighting Group | www.ansi.org ANSI is responsible for establishing standards and conformity assessment systems within the United States. ANSLG was initially created through the ANSI organization to support development of appropriate and needed lighting standards through its own working group(s) or other organizations. C78.377-2008 C82.77-2002 C136.37-2011 Specifi cations for the Chromaticity of Solid State Lighting Products Specifi es chromaticity (an attribute of color) tolerances for white light LEDs intended to be used indoors based on nominal correlated color temperature (CCT) values. Harmonic Emission Limits – Related Power Quality Requirements for Lighting Summarizes harmonic limits...

Words: 2562 - Pages: 11

Free Essay

Visible Light Communication

...Modeling and Designing of a New Indoor Free Space Visible Light Communication System∗ Z. Wu, J. Chau, and T.D.C. Little Department of Electrical and Computer Engineering Boston University, Boston, Massachusetts tdcl@bu.edu August 1, 2011 MCL Technical Report No. 08-01-2011 Abstract–Recent developments in solid-state light-emitting diode (LED) materials and devices is driving a resurgence into the use of free-space optics (FSO) for wireless broadband communication. This technology uses the visible spectrum provided by “white” LEDs that are becoming ubiquitous in lighting and has some desirable properties competitive with existing radio frequency (RF) communications. By leveraging the low-cost nature of LEDs and lighting units there are many opportunities to exploit this medium for widespread optical communication deployment. The optical medium, however, has particular characteristics, including directionality and susceptibility to noise sources in the visible spectrum that must be managed. In this paper we present a new indoor FSO system, also known as a visible light communication (VLC) system that addresses achieving satisfactory data rates through diffuse link while supporting mobility under line of sight (LOS) constraints. The system model is presented with theoretical performance analysis indicating a promising rate for indoor scenarios. The new VLC prototype that can deliver in excess of 1 Mbps while providing both illumination and communication at several meters is also...

Words: 1962 - Pages: 8

Free Essay

Amazon

...Amazon Amazon is a company that is trying to lessen the impact they have on the environment. They feel that they are helping to reduce the impact convent shopping has on the environment by offering shopping through the Internet instead of going to a shopping center and they offer almost everything you can find at a mall on their web site. They also ask for customer feedback so they know how easy their products were to get out of their packaging. Amazon is working hard to cut down their imprint on the environment by asking their employee’s to help with figuring out ways to save money and packaging of products and the semi trailers. Amazon is not only working on better receiving of products, they are working on cutting down their fuel costs, their consumption of kilowatt-hours, and recycling costs. They have a team put together and this team goes around to each site to discuss how to save the environment and the company money. In Hebron, Kentucky, they found a way to load semi trailers by reconfiguring the loading process, thus they save more than $ 3 million dollars and 300,000 gallons of fuel each year (www.amazon.com). In Pennsylvania, they found that one of their sites (they have two sites) was purchasing pallets each week while their other site was disposing of pallets each week. They decided to load the unused pallets and ship them to the site that needed them thus saving the company more than $100,000 each year. In Kentucky, the team found that lights were staying...

Words: 624 - Pages: 3

Free Essay

Acoustic Design Studio

...Architecture Part 1: Qualitative and Design process considerations 1.1 Diagrams Fig 1. Design process consideration for a high performance acoustic studio building Fig2: Qualitative and Design process considerations 1.2 Daylight design process The day lighting design process involves the identification of a lighting need and the selection of the most appropriate method for delivering the appropriate day lighting in this case. The process begins with determining the building type. The type of building gives the set of visual tasks that have an associated lighting criteria which is used in the design process. In addition, it indicates the likely size and mass of the building. The feature is important because the lighting concepts that are generated for single-storey buildings will be remarkably different from those that are used in high-rise offices (Yancey 9). Moreover, there are numerous feedback loops that can be used during the design process. For instance, as I generate day lighting system concepts I can re-evaluate the resource measurements to identify their adequacy in giving me the information that I need to produce an effective process. A good example is that a day lighting system that relies upon sunlight cannot be evaluated using the average sunlight intensity collected over a wide range of cloudiness. As a result, the appropriate time scale that should be used in each scenario is determined by the resource measurements that are being assessed. Moreover...

Words: 618 - Pages: 3

Premium Essay

Estimation of Solar Energy for Street Lights in Vit

...ESTIMATION OF SOLAR ENERGY FOR STREET LIGHTS IN VIT ABSTRACT A solar lighting system which can make a 18x3 w lamp glow continuously for about (7) hours if the battery is fully charged has been constructed. Here, solar energy is collected with the aid of a solar panel and thus, a battery is charged during day time with the help of a simple charging circuit. During night time, this stored energy is used to light. The device can be used for small-scale lighting applications in remote areas that are far away from the power grid. The system has a panel to collect the sun’s energy, a battery to store that energy and a light source to use the energy. The system operates like a bank account. Withdrawals from the battery to power the light source must be compensated for by commensurate deposits of energy form the solar panels. INTRODUCTION Electricity is becoming costly every day; so many people are getting interested in using solar energy to fulfil their electricity needs. Power cuts and dependency on Generators is making people look for better sources. Solar Photo Voltaic panels provide a very good alternative way to fulfil their demand. Ministry of New and Renewable Energy (MNRE), Government of India is also promoting solar PV systems under the Jawaharlal Nehru National Solar Mission (JNNSM) in our country. They also provide subsidise solar panels under this scheme. There are so many people, interested in buying solar panels in India so we thought of doing a research on price...

Words: 2929 - Pages: 12

Premium Essay

Swagger

...Chapter 1 Planning Facilities Facility components * seating/space * handicap accessibilities/ADA/Universal Design * playing surface/performance * restrooms * lockers/auxiliary team facility * parking/access/public transportation * concessions * scoreboards/jumbotrons * security/medical/crowd control * ticketing box office/turnstiles * merchandise * lighting * janitorial space * general storage space/loading dock * office space/meeting space * power Master planning * process structured to promote cost-effective development decisions * best serve the organizations goals and objectives * makes facility development more organized, less haphazard * master plans often look ahead 10, 15 or even 30 years out * program specialists * financial consultants * maintenance personnel * community representatives * management representatives * facility consultants * end users Steps of master planning * identification and confirmation of the organizations plan goals and objectives * synthesis and evaluation of findings * government functions Site selection * access to site * traffic circulation * parking * water supply * sewage disposal * electrical service * telephone service * gas transmission lines * cable tv * environmental concerns * easements and other legal issues * zoning requirements * historical...

Words: 581 - Pages: 3

Free Essay

Jabberwocky

...HY E ! T IOMTN H N RAO EF I ITSDIOT T ! NH PF U A D I S DE JN STIOKCNEOG O UADBOSANR R I Y . F U- - TP N ADN O P O A L SN IO R TD E A F Home Sign Up! Explore Community Submit All Art Craft Food Games Green Home Kids Life Music Offbeat Outdoors Pets Ride Science Sports Tech DIY High-Speed Book Scanner from Trash and Cheap Cameras by daniel_reetz on April 18, 2009 Table of Contents intro: DIY High-Speed Book Scanner from Trash and Cheap Cameras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 step 1: Material Acquisition: Dumpster Dive in the Day With Your Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 step 2: Material Acquisition: Tools and Why You (Might) Need Them . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 step 3: Material Acquisition: Buying Recycled Stuff. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Words: 16057 - Pages: 65

Premium Essay

Tere

...ADAPTIVE STrEET LIGHTING GUIDE DIScLAImEr This BC Hydro Adaptive Street Lighting Information Brochure (the “Brochure”) has been produced by BC Hydro for the convenience and informational purposes of only those BC Hydro customers to whom BC Hydro has provided this Brochure and is not to be provided to any other party. Any information in this Brochure that is summarized or excerpted from specific studies, articles or other sources reflect the views of the authors of such studies, articles or other sources that are cited. All other information in this Brochure reflects the views of BC Hydro after reviewing and interpreting the foregoing cited sources and other sources. BC Hydro has not conducted any of its own research or other activities to verify its own views or the views of the authors of any of the cited sources. BC Hydro does not make any representations or warranties of any kind, whether express, implied or statutory, with respect to any of the information contained in this Brochure and any user of this Brochure is advised to use the information contained herein at their own risk. BC Hydro also does not accept any liability (including, without limitation, liability for any direct, indirect, consequential or any other type of damages) arising from or relating to any use of, or reliance upon, this Brochure for any purpose. If any information relating to a particular product or manufacturer is contained in this Brochure, BC Hydro will not be deemed to have endorsed or promoted...

Words: 6018 - Pages: 25

Free Essay

Sensor and Control

...OBJECTIVE Design and install a control system to dim lights and/or turn them off when there is adequate daylight. • Reduce lighting energy consumption with automatic controls. • Use a lighting specialist for best results with the control system. KEY IDEAS General • Sensors “measure” light by looking at a wide area of the office floor and work surfaces from a point on the ceiling. The sensor’s signal is then used by the control system to dim or turn off the electric lights according to the available daylight. These simple components are needed to save energy in daylighted spaces. • Controls can respond to many variables. To save lighting energy, controls are typically designed to respond to daylight and a host of other inputs (e.g., occupancy sensors, weekend/holiday/nighttime schedules, etc.). • Include all control documentation in the construction documents. This should include clearly developed control schematics, control sequences, calibration instructions, maintenance plans and checklists, and clear testing procedures. • Lighting controls and sensors must be properly calibrated and commissioned prior to occupancy. This helps ensure energy savings and reduces the likelihood of complaints from occupants. • Take special care to document integrated control systems. Control schematics are critical where different building systems (e.g., lighting, mechanical, etc.) come together. Identify responsibilities where integrated systems overlap, such as who adjusts each...

Words: 3988 - Pages: 16