C# Development Rob Miles Edition 1.1 October 2009 Department of Computer Science University of Hull i Contents Introduction...................................................................................................................... 11 Welcome ............................................................................................................. 11 Reading the notes................................................................................................ 11 Getting a copy of the notes ................................................................................. 11 Computers 12 An Introduction to Computers .......................................................................................... 12 Hardware and Software ...................................................................................... 12 Data and Information ........................................................................................................ 13 Data Processing .................................................................................................. 13 Programmer’s Point:At the bottom there is always hardware ............................. 14 Programming Languages 15 What is Programming? ..................................................................................................... 15 From Problem to Program .................................................................................. 15 Programmer’s Point:The specification must always be there ............................. 16 A Simple Problem ............................................................................................................. 16 Specifying the Problem ....................................................................................... 16 Programmer’s Point:metadata is important ......................................................... 17 Programmer’s Point:Good programmers are good communicators .................... 19 Programming Languages .................................................................................................. 19 Programmer’s Point:The language is not that important..................................... 20 C# 20 A look at C# ...................................................................................................................... 20 Dangerous C ....................................................................................................... 20 Programmer’s Point:Computers are always stupid ............................................. 21 Safe C# ............................................................................................................... 21 C# and Objects ................................................................................................... 21 Making C# Run .................................................................................................. 21 Creating C# Programs ........................................................................................ 22 The Human Computer ........................................................................................ 22 Programmer’s Point:Great programmers debug less .......................................... 22 What Comprises a C# Program? ....................................................................................... 22 Controlling the Compiler .................................................................................... 23 Storing the Data .................................................................................................. 23 Describing the Solution ...................................................................................... 23 Identifiers and Keywords .................................................................................... 23 A First C# Program 24 The Program Example ...................................................................................................... 24 using System; ............................................................................................. 24 class GlazerCalc ...................................................................................... 25 static.............................................................................................................. 25 void .................................................................................................................. 25 Main .................................................................................................................. 25 () ....................................................................................................................... 25 ii { .......................................................................................................................... 26 double.............................................................................................................. 26 width, height, woodLength, glassArea ...................................... 26 Programmer’s Point:Know where your data comes from ................................... 26 ; ......................................................................................................................... 26 string widthString, heightString; ............................................. 27 widthString = ............................................................................................. 27 Console. ......................................................................................................... 27 ReadLine ......................................................................................................... 27 () ....................................................................................................................... 27 ; ......................................................................................................................... 28 width = ........................................................................................................... 28 double. ........................................................................................................... 28 Parse ................................................................................................................ 28 (widthString); .......................................................................................... 28 heightString = Console.ReadLine(); height = double.Parse(heightString);............................................................ 29 woodLength = 2*(width + height)*3.25 ; ................................. 29 glassArea = 2 * ( width * height ) ; ...................................... 29 Console.WriteLine ................................................................................... 29 ( ......................................................................................................................... 29 "The length of the wood is " ......................................................... 29 + ......................................................................................................................... 29 woodLength .................................................................................................... 30 + " feet" ...................................................................................................... 30 ) ......................................................................................................................... 30 ; ......................................................................................................................... 31 } ......................................................................................................................... 31 } ......................................................................................................................... 31 Programmer’s Point:Program layout is very important ...................................... 31 Punctuation ......................................................................................................... 31 Manipulating Data 32 Variables and Data ............................................................................................................ 32 Types of Variables ............................................................................................................ 32 Storing Numbers ................................................................................................. 32 Storing integer values ......................................................................................... 33 Programmer’s Point:Check your own maths....................................................... 33 integer literal values ............................................................................................ 34 Storing real values .............................................................................................. 34 real literal values ................................................................................................. 34 Programmer’s Point:Simple variables are probably best .................................... 35 Storing Text ........................................................................................................ 35 char variables ...................................................................................................... 35 char literal values ................................................................................................ 35 string variables .................................................................................................... 36 string literal values .............................................................................................. 37 bool variables ..................................................................................................... 37 bool literal values ............................................................................................... 37 Programmer’s Point:Think about the type of your variables .............................. 37 Identifiers .......................................................................................................................... 38 Programmer’s Point:Think about the names of your variables ........................... 38 Giving Values to Variables ............................................................................................... 39 Expressions ......................................................................................................... 39 Changing the Type of Data ............................................................................................... 40 Widening and Narrowing ................................................................................... 40 Casting ................................................................................................................ 41 iii Types of Data in Expressions............................................................................................ 42 Programmer’s Point:Casts can add clarity .......................................................... 43 Programs and Patterns ...................................................................................................... 43 Writing a Program 44 Software as a story ............................................................................................................ 44 Comments ........................................................................................................... 45 Programmer’s Point:Don't add too much detail .................................................. 45 Program Flow ................................................................................................................... 45 Conditional Execution - if .................................................................................. 46 Conditions and Relational Operators .................................................................. 46 Combining Logical Operators ............................................................................ 48 Programmer’s Point:Break down your conditions .............................................. 48 Lumping Code Together ..................................................................................... 48 Metadata, Magic Numbers and const ................................................................. 49 Loops ............................................................................................................................... 50 Programmer’s Point:Don't be clever/stupid ........................................................ 53 Breaking Out of Loops ....................................................................................... 53 Programmer’s Point:Be careful with your breaks ............................................... 53 Going back to the top of a loop .......................................................................... 54 More Complicated Decisions ............................................................................. 54 Programmer’s Point:Get used to flipping conditions .......................................... 54 Complete Glazing Program ................................................................................ 54 Operator Shorthand ........................................................................................................... 55 Statements and Values ........................................................................................ 56 Programmer’s Point:Always strive for simplicity ............................................... 57 Neater Printing .................................................................................................................. 57 Using Placeholders in Print Strings .................................................................... 57 Methods 59 Methods So Far ................................................................................................................. 59 Method and Laziness .......................................................................................... 59 Parameters .......................................................................................................... 60 Return values ...................................................................................................... 60 A Useful Method ................................................................................................ 60 Programmer’s Point:Design with methods ......................................................... 61 Method Limitations ............................................................................................ 61 Programmer’s Point:Document your side-effects ............................................... 63 Programmer’s Point:Languages can help programmers...................................... 63 Method Libraries ................................................................................................ 64 Programmer’s Point:Always consider the failure behaviours ............................. 64 Variables and Scope ......................................................................................................... 64 Scope and blocks ................................................................................................ 65 Nested Blocks ..................................................................................................... 65 For loop local variables ...................................................................................... 66 Programmer’s Point:Plan your variable use ........................................................ 66 Arrays 66 Why We Need Arrays ....................................................................................................... 66 Array Elements ................................................................................................... 67 Array Element Numbering .................................................................................. 68 Large Arrays ....................................................................................................... 68 Managing Array Sizes ........................................................................................ 68 Creating a Two Dimensional Array .................................................................... 69 More than Two Dimensions ............................................................................... 69 Programmer’s Point:Keep your dimensions low ................................................ 69 iv Switching 70 Making Multiple Decisions ............................................................................................... 70 Selecting using the if construction .................................................................... 70 The switch construction .................................................................................. 71 Programmer’s Point:switches are a good idea .................................................... 72 Our Case Study: Friendly Bank 72 Bank System Scope ........................................................................................................... 72 Bank Notes........................................................................................................................ 72 Enumerated Types 72 Enumeration and states ..................................................................................................... 73 Sample states ...................................................................................................... 73 Creating an enum type ...................................................................................................... 74 Programmer’s Point:Use enumerated types ........................................................ 74 Structures 75 What is a Structure? .......................................................................................................... 75 A sample structure .............................................................................................. 75 Creating a Structure .......................................................................................................... 76 Using a Structure .............................................................................................................. 76 Initial values in structures ................................................................................... 77 Programmer’s Point:Structures are crucial ......................................................... 77 Enumerated Types in Structures ......................................................................... 77 Objects, Structures and References 78 Objects and Structures ...................................................................................................... 79 Creating and Using a Structure ........................................................................... 79 Creating and Using an Instance of a Class .......................................................... 79 References ......................................................................................................................... 81 Multiple References to an Instance ..................................................................... 81 No References to an Instance ............................................................................. 82 Programmer’s Point:Try to avoid the Garbage Collector ................................... 83 Why Bother with References? .......................................................................................... 83 References and Data Structures .......................................................................... 84 Programmer’s Point:Data Structures are Important ............................................ 84 Reference Importance ......................................................................................... 84 Bank Notes: References and Accounts ............................................................................. 84 Designing With Objects 85 Programmer’s Point:Not Everything Should Be Possible ................................... 86 Data in Objects ................................................................................................................. 86 Member Protection inside objects ...................................................................... 86 Changing private members............................................................................ 87 Programmer’s Point:Metadata makes Members and Methods ............................ 88 public Methods ............................................................................................... 88 Programmer’s Point:private data and public methods ........................................ 88 A Complete Account Class ............................................................................................... 88 Programmer’s Point:Test Driven Development – the only way .......................... 90 Bank Notes: Protecting Account Members ....................................................................... 90 Static Items 90 Static class members ......................................................................................................... 90 Using a static data member of a class ................................................................. 91 v Programmer’s Point:Static Data Members are Useful and Dangerous ............... 92 Using a static method in a class .................................................................... 92 Using member data in static methods ................................................................. 93 Programmer’s Point:Static Method Members can be used to make Libraries .... 94 Bank Notes: Static Bank Information ............................................................................... 94 The Construction of Objects 94 The Default Constructor ................................................................................................... 95 Our Own Constructor ........................................................................................................ 95 Feeding the Constructor Information .................................................................. 96 Overloading Constructors ................................................................................................. 96 Overloading a method name ............................................................................... 97 Constructor Management .................................................................................................. 97 Programmer’s Point:Object Construction Should Be Planned ........................... 98 A constructor cannot fail ................................................................................................... 98 Programmer’s Point:Managing Failure is Hard Work ........................................ 99 Constructors and Exceptions .............................................................................. 99 Programmer’s Point:Consider the International Issues ..................................... 100 Bank Notes: Constructing an Account ............................................................................ 100 From Object to Component 100 Components and Hardware ............................................................................................. 101 Why we Need Software Components? ............................................................................ 101 Components and Interfaces ............................................................................................. 101 Interfaces and Design ....................................................................................... 102 Implementing an Interface in C# ..................................................................................... 102 References to Interfaces .................................................................................................. 103 Using interfaces .............................................................................................................. 103 Implementing Multiple Interfaces ................................................................................... 104 Designing with Interfaces ............................................................................................... 105 Programmer’s Point:Interfaces are just promises ............................................. 105 Bank Notes: Account Interfaces...................................................................................... 105 Inheritance 106 Extending a parent class .................................................................................................. 106 Programmer’s Point:Block Copy is Evil ........................................................... 107 Overriding methods ........................................................................................................ 107 Virtual Methods ................................................................................................ 108 Protection of data in class hierarchies............................................................... 108 Bank Notes: Overriding for Fun and Profit ..................................................................... 109 Using the base method .................................................................................................... 109 Making a Replacement Method ...................................................................................... 110 Programmer’s Point:Don’t Replace Methods ................................................... 110 Stopping Overriding ....................................................................................................... 110 Bank Notes: Protect Your Code ...................................................................................... 111 Constructors and Hierarchies .......................................................................................... 111 Constructor Chaining ........................................................................................ 112 Programmer’s Point:Design your class construction process ........................... 112 Abstract methods and classes .......................................................................................... 112 Abstract classes and interfaces ......................................................................... 113 References to abstract classes ........................................................................... 115 Bank Notes: Designing with interface and abstract......................................................... 115 Don’t Panic ..................................................................................................................... 115 Object Etiquette 116 Objects and ToString ................................................................................................. 116 vi The Object class ............................................................................................... 116 The ToString method ................................................................................... 117 Getting the string description of a parent object ............................................... 117 Objects and testing for equals ......................................................................................... 118 Adding an Equals method ................................................................................. 118 Programmer’s Point:Make sure you use the right equals .................................. 119 Objects and this ........................................................................................................... 119 this as a reference to the current instance...................................................... 120 Passing a reference to yourself to other classes ................................................ 120 Confusion with this ....................................................................................... 120 Bank Notes: Good Manners are a Good Idea ................................................................. 120 Programmer’s Point:Always provide an equals behaviour ............................... 121 The power of strings and chars 121 String Manipulation ........................................................................................................ 121 String Transformation ....................................................................................... 121 Immutable strings ............................................................................................. 122 String Comparison ............................................................................................ 122 String Editing .................................................................................................... 122 String Length .................................................................................................... 123 Character case ................................................................................................... 123 Trimming and empty strings ............................................................................. 123 Character Commands ........................................................................................ 123 String Twiddling with StringBuilder ....................................................... 124 Properties 124 Properties as class members ............................................................................................ 124 Creating Get and Set methods ......................................................................................... 124 Using Properties .............................................................................................................. 125 Properties and interfaces ................................................................................................. 126 Property problems ........................................................................................................... 126 Property Assignment Failure ............................................................................ 126 Properties Run Code ......................................................................................... 127 Programmer’s Point:Don’t use new fangled stuff just because it is there ......... 127 Building a Bank 127 Storing Accounts in an array ............................................................................ 128 Searching and Performance .............................................................................. 129 Storing Accounts using a Hash Table ............................................................... 130 Using the C# Hashtable collection .................................................................... 130 Bank Notes: Key properties are important ...................................................................... 131 Generics and Collections 131 The ArrayList class ......................................................................................................... 131 Creating an ArrayList ....................................................................................... 132 Adding Items to an ArrayList ........................................................................... 132 Accessing Items in an ArrayList ....................................................................... 132 Removing Items from an ArrayList .................................................................. 133 Finding the size of an ArrayList ....................................................................... 133 Checking to see if an ArrayList contains an item ............................................. 133 ArrayLists and Arrays ....................................................................................... 133 The List class .................................................................................................................. 134 Generics and Behaviours .................................................................................. 134 Generics and the List ........................................................................................ 135 The Dictionary class ....................................................................................................... 135 Writing Generic Code ..................................................................................................... 136 vii Storing Business Objects 136 Saving an Account .......................................................................................................... 137 Loading an Account ........................................................................................................ 138 Programmer’s Point:There is only so much you can do ................................... 139 Multiple Accounts ........................................................................................................... 139 Using streams ................................................................................................... 139 Programmer’s Point:Streams are wonderful ..................................................... 140 Saving and loading bank accounts .................................................................... 140 Bank Notes: Large Scale Data Storage ........................................................................... 141 Handling different kinds of accounts .............................................................................. 141 Health Warning ................................................................................................ 141 Banks and Flexibility ........................................................................................ 142 Saving a child class ........................................................................................... 143 Loading a child class ........................................................................................ 143 Interfaces and the save operation ...................................................................... 144 Loading and factories ....................................................................................... 144 Factory Dependencies ....................................................................................... 146 Bank Notes: Messy Code ................................................................................................ 146 Business Objects and Editing 146 Programmer’s Point:Production Code .............................................................. 146 The role of the Business Object ...................................................................................... 147 Managing a bank account name ........................................................................ 147 Testing Name Handling .................................................................................... 148 Programmer’s Point:Use Numbers Not Messages ............................................ 149 Editing the Name .............................................................................................. 149 Creating an Editor class .................................................................................... 149 Programmer’s Point:Get used to passing references around ............................. 150 A Text Based Edit System .............................................................................................. 151 Programmer’s Point:Every Message Counts .................................................... 152 Bank Notes: More Than One User Interface ................................................................... 152 A Graphical User Interface 152 Creating a Form ............................................................................................................. 152 Adding Components to a Form ......................................................................... 153 Editing Text with a TextBox Component ...................................................... 154 The Button Component ................................................................................. 155 Events and Delegates ...................................................................................................... 156 Events and method calls ................................................................................... 157 Button Events ................................................................................................... 157 An Account Edit Form .................................................................................................... 158 Extending the Windows Form class.................................................................. 158 Disposing of forms ........................................................................................... 160 Using the Edit form .......................................................................................... 160 Modal Editing ................................................................................................... 160 Visual Studio and Form Editing ....................................................................... 160 Programmer’s Point:Customers really care about the user interface ................ 161 Using Delegates 161 Type safe delegates ......................................................................................................... 161 Using a Delegate ............................................................................................... 161 Programmer’s Point:Delegates are strong magic .............................................. 163 Structured Error Handling 163 The Exception class ........................................................................................................ 163 viii Creating your own exception type .................................................................................. 163 Throwing an Exception ................................................................................................... 164 Programmer’s Point:Design your error exceptions yourself ............................. 165 Multiple Exception Types ............................................................................................... 165 Programmer’s Point:Programs often fail in the error handlers ......................... 166 Program Organisation 166 Using Separate Source Files ........................................................................................... 166 Creating a Library ............................................................................................. 167 Using a Library ................................................................................................. 168 Library References at Runtime ......................................................................... 168 Programmer’s Point:Use Version Control and Change Management ............... 169 Namespaces .................................................................................................................... 169 Putting a Class in a Namespace ........................................................................ 170 Using a Class from a Namespace ...................................................................... 170 Using a namespace ........................................................................................... 171 Nesting Namespaces ......................................................................................... 171 Namespaces in Separate Files ......................................................................................... 172 Programmer’s Point:Fully Qualified Names are Good ..................................... 172 Debugging 172 Fault Reporting ............................................................................................................... 172 Programmer’s Point:Design Your Fault Reporting Process ............................. 173 The two types of Fault ...................................................................................... 173 Bugswatting .................................................................................................................... 173 Rip it up and start again .................................................................................... 174 Programmer’s Point:Bug Fixes Cause Bugs ..................................................... 175 Making Perfect Software ................................................................................................ 175 The End? 175 Continuous Development ................................................................................................ 176 Further Reading .............................................................................................................. 176 Code Complete Second Edition: Steve McConnell .......................................... 176 How to be a programmer .................................................................................. 176 Glossary of Terms 177 Abstract ........................................................................................................................... 177 Accessor .......................................................................................................................... 177 Base ............................................................................................................................... 177 Call................................................................................................................................. 177 Class ............................................................................................................................... 177 Code Reuse ..................................................................................................................... 178 Cohesion ......................................................................................................................... 178 Collection ........................................................................................................................ 178 Compiler ......................................................................................................................... 178 Component ...................................................................................................................... 178 Constructor ..................................................................................................................... 179 Coupling ......................................................................................................................... 179 Creative Laziness ............................................................................................................ 179 Delegate .......................................................................................................................... 179 Dependency .................................................................................................................... 179 Event ............................................................................................................................... 180 Functional Design Specification ..................................................................................... 180 Globally Unique Identifier (GUID) ................................................................................ 180 Hierarchy ........................................................................................................................ 180 Immutable ....................................................................................................................... 180 ix Inheritance ...................................................................................................................... 180 Interface .......................................................................................................................... 180 Library ............................................................................................................................ 181 Machine code .................................................................................................................. 181 Member ........................................................................................................................... 181 Metadata ......................................................................................................................... 181 Method ............................................................................................................................ 181 Mutator ........................................................................................................................... 181 Namespace ...................................................................................................................... 182 Overload ......................................................................................................................... 182 Override .......................................................................................................................... 182 Portable ........................................................................................................................... 182 Private ............................................................................................................................. 182 Property .......................................................................................................................... 182 Protected ......................................................................................................................... 183 Public .............................................................................................................................. 183 Reference ........................................................................................................................ 183 Signature ......................................................................................................................... 183 Source file ....................................................................................................................... 183 Static ............................................................................................................................... 183 Stream ............................................................................................................................. 184 Structure .......................................................................................................................... 184 Subscript ......................................................................................................................... 184 Test harness .................................................................................................................... 184 This ................................................................................................................................ 184 Typesafe .......................................................................................................................... 184 Unit test ........................................................................................................................... 185 Value type ....................................................................................................................... 185 Virtual Method ................................................................................................................ 185 Index 187 © Rob Miles 2009 Department of Computer Science, The University of Hull. All rights reserved. No reproduction, copy or transmission of this publication may be made without written permission. The author can be contacted at: The Department of Computer Science, Robert Blackburn Building The University of Hull, Cottingham Road HULL HU6 7RX UK Department: www.dcs.hull.ac.uk Email: rob@robmiles.com Blog: www.robmiles.com If you find a mistake in the text please report the error to foundamistake@robmiles.com and I will take a look. Vsn. 1.1 Wednesday, 23 September 2009

Computers Introduction
C# Programming © Rob Miles 2009 11
Introduction Welcome Welcome to the Wonderful World of Rob Miles™. This is a world of bad jokes, puns, and programming. In this book I'm going to give you a smattering of the C# programming language. If you have programmed before I'd be grateful if you'd still read the text. It is worth it just for the jokes and you may actually learn something. If you have not programmed before, do not worry. Programming is not rocket science it is, well, programming. The bad news about learning to program is that you get hit with a lot of ideas and concepts at around the same time when you start, and this can be confusing. The keys to learning programming are:  Practice – do a lot of programming and force yourself to think about things from a problem solving point of view  Study – look at programs written by other people. You can learn a lot from studying code which other folk have created. Figuring out how somebody else did the job is a great starting point for your solution. And remember that in many cases there is no best solution, just ones which are better in a particular context, i.e. the fastest, the smallest, the easiest to use etc.  Persistence – writing programs is hard work. And you have to work hard at it. The principle reason why most folks don't make it as programmers is that they give up. Not because they are stupid. However, don't get too persistent. If you haven't solved a programming problem in 30 minutes you should call time out and seek help. Or at least walk away from the problem and come back to it. Staying up all night trying to sort out a problem is not a good plan. It just makes you all irritable in the morning. We will cover what to do when it all goes wrong later in these notes. Reading the notes These notes are written to be read straight through, and then referred to afterwards. They contain a number of Programming Points. These are based on real programming experience and are to be taken seriously. There are also bits written in a Posh Font. These are really important and should be learnt by heart. If you have any comments on how the notes can be made even better (although I of course consider this highly unlikely) then feel free to get in touch Above all, enjoy programming. Rob Miles rob@robmiles.com www.robmiles.com www.dcs.hull.ac.uk Getting a copy of the notes These notes are made freely available to Computer Science students at the University of Hull. The website for the book is at http://www.csharpcourse.com
Computers An Introduction to Computers
C# Programming © Rob Miles 2009 12
Computers An Introduction to Computers Before we consider programming, we are going to consider computers. This is an important thing to do, because it sets the context in which all the issues of programming itself are placed. Qn: Why does a bee hum? Ans: Because it doesn't know the words! One way of describing a computer is as an electric box which humms. This, whilst technically correct, can lead to significant amounts of confusion, particularly amongst those who then try to program a fridge. A better way is to describe it as: A device which processes information according to instructions it has been given. This general definition rules out fridges but is not exhaustive. However for our purposes it will do. The instructions you give to the computer are often called a program. The business of using a computer is often called programming. This is not what most people do with computers. Most users do not write programs, instead they talk to programs written by other people. We must therefore make a distinction between users and programmers. A user has a job which he or she finds easier to do on a computer running the appropriate program. A programmer has a masochistic desire to tinker with the innards of the machine. One of the golden rules is that you never write your own program if there is already one available, i.e. a keen desire to process words with a computer should not result in you writing a word processor! However, because you will often want to do things with computers which have not been done before, and further because there are people willing to pay you to do it, we are going to learn how to program as well as use a computer. Before we can look at the fun packed business of programming though it is worth looking at some computer terminology: Hardware and Software If you ever buy a computer you are not just getting a box which humms. The box, to be useful, must also have sufficient built in intelligence to understand simple commands to do things. At this point we must draw a distinction between the software of a computer system and the hardware. Hardware is the physical side of the system. Essentially if you can kick it, and it stops working when immersed in a bucket of water, it is hardware. Hardware is the impressive pile of lights and switches in the corner.... Software is what makes the machine tick. If a computer has a soul it keeps it in its software. Software uses the physical ability of the hardware, which can run programs, do something useful. It is called software because it has no physical existence and it is comparatively easy to change. Software is the voice which says "Computer Running" in a Star Trek film.
Computers Data and Information
C# Programming © Rob Miles 2009 13
Windows XP is an operating system. It gives computer programs a platform on which they can execute. All computers are sold with some software. Without it they would just be a novel and highly expensive heating system. The software which comes with a computer is often called its Operating System. The Operating System makes the machine usable. It looks after all the information held on the computer and provides lots of commands to allow you to manage things. It also lets you run programs, ones you have written and ones from other people. You will have to learn to talk to an operating system so that you can create your C# programs and get them to go. Data and Information People use the words data and information interchangeably. They seem to think that one means the other. I regard data and information as two different things: Data is the collection of ons and offs which computers store and manipulate. Information is the interpretation of the data by people to mean something. Strictly speaking computers process data, humans work on information. An example, the computer holds the bit pattern: 11111111 11111111 11111111 00000000 However you could regard this as meaning: "you are 256 pounds overdrawn at the bank" or "you are 256 feet below the surface of the ground" or "eight of the thirty two light switches are off" The transition from data to information is usually made when the human reads the output. So why am I being so pedantic? Because it is vital to remember that a computer does not "know" what the data it is processing actually means. As far as it is concerned data is just patterns of bits, it is you who gives meaning to these patterns. Remember this when you get a bank statement which says that you have £8,388,608! Data Processing Computers are data processors. Information is fed into them; they do something with it, and then generate further information. A computer program tells the computer what to do with the information coming in. A computer works on data in the same way that a sausage machine works on meat, something is put in one end, some processing is performed, and something comes out of the other end: DataComputerData This makes a computer a very good "mistake amplifier", as well as a useful thing to blame..... A program is unaware of the data it is processing in the same way that a sausage machine is unaware of what meat is. Put a bicycle into a sausage machine and it will try to make sausages out of it. Put duff data into a computer and it will do equally useless things. It is only us people who actually ascribe meaning to data (see above), as far as the computer is concerned it is just stuff coming in which has to be manipulated in some way. A computer program is just a sequence of instructions which tell a computer what to do with the data coming in and what form the data sent out will have.
Computers Data and Information
C# Programming © Rob Miles 2009 14
Note that the data processing side of computers, which you might think is entirely reading and writing numbers, is much more than that, examples of typical data processing applications are: Digital Watch : A micro-computer in your watch is taking pulses from a crystal and requests from buttons, processing this data and producing a display which tells you the time. Car : A micro-computer in the engine is taking information from sensors telling it the current engine speed, road speed, oxygen content of the air, setting of the accelerator etc and producing voltages out which control the setting of the carburettor, timing of the spark etc, to optimise the performance of the engine. CD Player : A computer is taking a signal from the disk and converting it into the sound that you want to hear. At the same time it is keeping the laser head precisely positioned and also monitoring all the buttons in case you want to select another part of the disk. Games Console: A computer is taking instructions from the controllers and using them to manage the artificial world that it is creating for the person playing the game. Note that some of these data processing applications are merely applying technology to existing devices to improve the way they work. However the CD player and games console could not be made to work without built-in data processing ability. Most reasonably complex devices contain data processing components to optimise their performance and some exist only because we can build in intelligence. It is into this world that we, as software writers are moving. It is important to think of business of data processing as much more than working out the company payroll, reading in numbers and printing out results. These are the traditional uses of computers. Note that this "raises the stakes" in that the consequences of software failing could be very damaging. As software engineers it is inevitable that a great deal of our time will be spent fitting data processing components into other devices to drive them. You will not press a switch to make something work, you will press a switch to tell a computer to make it work. These embedded systems will make computer users of everybody, and we will have to make sure that they are not even aware that there is a computer in there! You should also remember that seemingly innocuous programs can have life threatening possibilities. For example a doctor may use a spreadsheet to calculate doses of drugs for patients. In this case a defect in the program could result in illness or even death (note that I don't think that doctors actually do this – but you never know..) Programmer’s Point:At the bottom there is always hardware It is important that you remember your programs are actually executed by a piece of hardware which has physical limitations. You must make sure that the code you write will actually fit in the target machine and operate at a reasonable speed. The power and capacity of modern computers makes this less of an issue than in the past, but you should still be aware of these aspects. I will mention them when appropriate.
Programming Languages What is Programming?
C# Programming © Rob Miles 2009 15
Programming Languages What is Programming? I tell people I am a "Software Engineer". Programming is a black art. It is the kind of thing that you grudgingly admit to doing, at night, with the blinds drawn and nobody watching. Tell people that you program computers and you will get one of the following responses: 1. A blank stare. 2. "That's interesting", followed by a long description of the double glazing that they have just had fitted. 3. Asked to solve every computer problem that they have ever had, and ever will have. 4. A look which indicates that you can't be a very good one as they all drive Ferraris and tap into the Bank of England at will. Programming is defined by most people as earning huge sums of money doing something which nobody can understand. Programming is defined by me as deriving and expressing a solution to a given problem in a form which a computer system can understand and execute. One or two things fall out of this definition:  You need to be able to solve the problem yourself before you can write a program to do it.  The computer has to be made to understand what you are trying to tell it to do. And remember just how much plumbers earn…. I like to think of a programmer as a bit like a plumber! A plumber will arrive at a job with a big bag of tools and spare parts. Having looked at it for a while, tut tutting, he will open his bag and produce various tools and parts, fit them all together and solve your problem. Programming is just like this. You are given a problem to solve. You have at your disposal a big bag of tricks, in this case a programming language. You look at the problem for a while and work out how to solve it and then fit the bits of the language together to solve the problem you have got. The art of programming is knowing which bits you need to take out of your bag of tricks to solve each part of the problem. From Problem to Program Programming is not about mathematics, it is about organization and structure. The art of taking a problem and breaking it down into a set of instructions you can give a computer is the interesting part of programming. Unfortunately it is also the most difficult part of programming as well. If you think that learning to program is simply a matter of learning a programming language you are very wrong. In fact if you think that programming is simply a matter of coming up with a program which solves a problem you are equally wrong! There are many things you must consider when writing a program; not all of them are directly related to the problem in hand. I am going to start on the basis that you are writing your programs for a customer. He or she has problem and would like you to write a program to solve it. We shall assume that the customer knows even less about computers than we do! Initially we are not even going to talk about the programming language, type of computer or anything like that, we are simply going to make sure that we know what the customer wants.
Programming Languages A Simple Problem
C# Programming © Rob Miles 2009 16
Solving the Wrong Problem Coming up with a perfect solution to a problem the customer has not got is something which happens surprisingly often in the real world. Many software projects have failed because the problem that they solved was the wrong one. The developers of the system quite simply did not find out what was required, but instead created what they thought was required. The customers assumed that, since the developers had stopped asking them questions, the right thing was being built, and only at the final handover was the awful truth revealed. It is therefore very important that a programmer holds off making something until they know exactly what is required. The worst thing you can say to a customer is "I can do that". Instead you should think "Is that what the customer wants?" This is a kind of self discipline. Programmer’s pride themselves on their ability to come up with solutions, so as soon as they are given a problem they immediately start thinking of ways to solve it, this almost a reflex action. What you should do is think "Do I really understand what the problem is?". Before you solve a problem you should make sure that you have a watertight definition of what the problem is, which both you and the customer agree on. In the real world this is sometimes called a Functional Design Specification or FDS. This tells you exactly what the customer wants. Both you and the customer sign it, and the bottom line is that if you provide a system which behaves according to the design specification the customer must pay you. Once you have got your design specification, then you can think about ways of solving the problem. You might think that this is not necessary if you are writing a program for yourself; there is no customer to satisfy. This is not true. Writing an FDS forces you to think about your problem at a very detailed level. Programmer’s Point:The specification must always be there I have written many programs for money. I would never write a program without getting a solid specification first. This is true even (or perhaps especially) if I do a job for a friend. A Simple Problem Consider the scenario; you are sitting in your favourite chair in the pub contemplating the universe when you are interrupted in your reverie by a friend of yours who sells double glazing for a living. He knows you are a programmer of sorts and would like your help in solving a problem which he has: He has just started making his own window units and is looking for a program which will do the costing of the materials for him. He wants to just enter the dimensions of the window and then get a print out of the cost to make the window, in terms of the amount of wood and glass required. "This looks like a nice little earner" you think, and once you have agreed a price you start work. The first thing you need to do is find out exactly what the customer wants you to do... Specifying the Problem When considering how to write the specification of a system there are three important things:  What information flows into the system.  What flows out of the system.  What the system does with the information. There are lots of ways of representing this information in the form of diagrams, for now we will stick with written text when specifying each of the stages:
Programming Languages A Simple Problem
C# Programming © Rob Miles 2009 17
Information going in In the case of our immortal double glazing problem we can describe the information as:  The width of a window.  The height of the window. Information coming out The information that our customer wants to see is:  the area of glass required for the window  the length of wood required to build a frame. You can see what we need if you take a look at the diagram below: The area of the glass is the width multiplied by the height. To make the frame we will need two pieces of wood the width of the window, and two pieces of wood the height of the window. Programmer’s Point:metadata is important Information about information is called metadata. The word meta in this situation implies a "stepping back" from the problem to allow it to be considered in a broader context. In the case of our window program the metadata will tell us more about the values that are being used and produced, specifically the units in which the information is expressed and the valid range of values that the information may have. For any quantity that you represent in a program that you write you must have at least this level of metadata . What the program actually does The program can derive the two values according to the following equations: glass area = width of window * height of window wood length = (width of window + height of window) * 2 Putting in more detail We now have a fairly good understanding of what our program is going to do for us. Being sensible and far thinking people we do not stop here, we now have to worry about how our program will decide when the information coming in is actually valid. This must be done in conjunction with the customer, he or she must understand that if information is given which fits within the range specified, your program will regard the data as valid and act accordingly. In the case of the above we could therefore expand the definition of data coming in as: Width of Window Height of Window
Programming Languages A Simple Problem
C# Programming © Rob Miles 2009 18
 The width of the window, in metres and being a value between 0.5 Metres and 3.5 metres inclusive.  The height of the window, in metres and being a value between 0.5 metres and 2.0 metres inclusive. Note that we have also added units to our description, this is very important - perhaps our customer buys wood from a supplier who sells by the foot, in which case our output description should read :  The area of glass required for the window, in square metres. Remember that we are selling double glazing, so two panes will be required.  The length of wood required for the frame, given in feet using the conversion factor of 3.25 feet per metre. Note that both you and the customer must understand the document! Having written this all up in a form that both you and the customer can understand, we must then both sign the completed specification, and work can commence. Proving it Works In a real world you would now create a test which will allow you to prove that the program works, you could for example say: If I give the above program the inputs 2 metres high and 1 metre wide the program should print out: 4 square metres of glass and 9.75 feet of wood. The test procedure which is designed for a proper project should test out all possible states within the program, including the all important error conditions. In a large system the person writing the program may have to create a test harness which is fitted around the program and will allow it to be tested. Both the customer and the supplier should agree on the number and type of the tests to be performed and then sign a document describing these. Testing is a very important part of program development. There is even one development technique where you write the tests before you write the actual program that does the job. This is actually a good idea, and one we will explore later. In terms of code production, you can expect to write as much code to test your solution as is in the solution itself. Remember this when you are working out how much work is involved in a particular job. Getting Paid Better yet, set up a phased payment system so that you get some money as the system is developed. At this point the supplier knows that if a system is created which will pass all the tests the customer will have no option but to pay for the work! Note also that because the design and test procedures have been frozen, there is no ambiguity which can lead to the customer requesting changes to the work although of course this can still happen! The good news for the developer is that if changes are requested these can be viewed in the context of additional work, for which they can be expect to be paid. Customer Involvement Note also in a "proper" system the customer will expect to be consulted as to how the program will interact with the user, sometimes even down to the colour of the letters on the display! Remember that one of the most dangerous things that a programmer can think is "This is what he wants"! The precise interaction with the user - what the program does when an error is encountered, how the information is presented etc., is something which the customer is guaranteed to have strong opinions about. Ideally all this information should be put into the specification, which should include layouts of the screens and details of which keys should be pressed at each stage. Quite often prototypes will be used to get a idea of how the program should look and feel.
Programming Languages Programming Languages
C# Programming © Rob Miles 2009 19
Fact: If you expect to derive the specification as the project goes on either you will fail to do the job, or you will end up performing five times the work! If this seems that you are getting the customer to help you write the program then you are exactly right! Your customer may have expected you to take the description of the problem and go into your back room - to emerge later with the perfect solution to the problem. This is not going to happen. What will happen is that you will come up with something which is about 60% right. The customer will tell you which bits look OK and which bits need to be changed. You then go back into your back room, muttering under your breath, and emerge with another system to be approved. Again, Rob's law says that 60% of the duff 40% will now be OK, so you accept changes for the last little bit and again retreat to your keyboard.... The customer thinks that this is great, reminiscent of a posh tailor who produces the perfect fit after numerous alterations. All the customer does is look at something, suggests changes and then wait for the next version to find something wrong with. They will get a bit upset when the delivery deadline goes by without a finished product appearing but they can always cheer themselves up again by suing you. Fact: More implementations fail because of inadequate specification than for any other reason! If your insistence on a cast iron specification forces the customer to think about exactly what the system is supposed to do and how it will work, all to the better. The customer may well say "But I am paying you to be the computer expert, I know nothing about these machines". This is no excuse. Explain the benefits of "Right First Time" technology and if that doesn't work produce a revolver and force the issue! Again, if I could underline in red I would: All the above apply if you are writing the program for yourself. You are your own worst customer! You may think that I am labouring a point here; the kind of simple systems we are going to create as we learn to program are going to be so trivial that the above techniques are far too long winded. You are wrong. One very good reason for doing this kind of thing is that it gets most of the program written for you - often with the help of the customer. When we start with our double glazing program we now know that we have to: read in the width verify the value read in the height verify the value calculate width times height times 2 and print it calculate ( width + height ) * 2 * 3.25 and print it The programming portion of the job is now simply converting the above description into a language which can be used in a computer....... Programmer’s Point:Good programmers are good communicators The art of talking to a customer and finding out what he/she wants is just that, an art. If you want to call yourself a proper programmer you will have to learn how to do this. One of the first things you must do is break down the idea of "I am writing a program for you" and replace it with "We are creating a solution to a problem". You do not work for your customers, you work with them. This is very important, particularly when you might have to do things like trade with the customer on features or price. Programming Languages Once we know what the program should do (specification), and how we are going to determine whether it has worked or not (test) we now need to express our program in a form that the computer can work with. You might ask the question "Why do we need programming languages, why can we not use something like English?" There are two answers to this one:
C# A look at C#
C# Programming © Rob Miles 2009 20
1. Computers are too stupid to understand English. 2. English would make a lousy programming language. Please note that this does not imply that tape worms would make good programmers! To take the first point. We cannot make very clever computers at the moment. Computers are made clever by putting software into them, and there are limits to the size of program that we can create and the speed at which it can talk to us. At the moment, by using the most advanced software and hardware, we can make computers which are about as clever as a tape worm. Tape worms do not speak very good English, therefore we cannot make a computer which can understand English. The best we can do is get a computer to make sense of a very limited language which we use to tell it what to do. Time Files like an Arrow. Fruit Flies like a Banana! To take the second point. English as a language is packed full of ambiguities. It is very hard to express something in an unambiguous way using English, if you do not believe me, ask any lawyer! Programming languages get around both of these problems. They are simple enough to be made sense of by computer programs and they reduce ambiguity. Programmer’s Point:The language is not that important There are a great many programming languages around, during your career you will have to learn more than just one. C# is a great language to start programming in, but do not think that it is the only language you will ever need. C# A look at C# There are literally hundreds of programming languages around, you will need to know at least 3! We are going to learn a language called C# (pronounced C sharp). If you ever make the mistake of calling the language C hash you will show your ignorance straight away! C# is a very flexible and powerful programming language with an interesting history. It was developed by Microsoft Corporation for a variety of reasons, some technical, some political and others marketing. C# bears a strong resemblance to the C++ and Java programming languages, having borrowed (or improved) features provided by these languages. The origins of both Java and C++ can be traced back to a language called C, which is a highly dangerous and entertaining language which was invented in the early 1970s. C is famous as the language the UNIX operating system was written in, and was specially designed for this. Dangerous C I referred to C as a dangerous language. So what do I mean by that? Consider the chain saw. If I, Rob Miles, want to use a chain saw I will hire one from a shop. As I am not an experienced chain saw user I would expect it to come with lots of built in safety features such as guards and automatic cut outs. These will make me much safer with the thing but will probably limit the usefulness of the tool, i.e. because of all the safety stuff I might not be able to cut down certain kinds of tree. If I was a real lumberjack I would go out and buy a professional chain saw which has no safety features whatsoever but can be used to cut down most anything. If I make a mistake with the professional tool I could quite easily lose my leg, something the amateur machine would not let happen.
C# A look at C#
C# Programming © Rob Miles 2009 21
In programming terms this means is that C lacks some safety features provided by other programming languages. This makes the language much more flexible. However, if I do something stupid C will not stop me, so I have a much greater chance of crashing the computer with a C program than I do with a safer language. Programmer’s Point:Computers are always stupid I reckon that you should always work on the basis that any computer will tolerate no errors on your part and anything that you do which is stupid will always cause a disaster! This concentrates the mind wonderfully. Safe C# The C# language attempts to get the best of both worlds in this respect. A C# program can contain managed or unmanaged parts. The managed code is fussed over by the system which runs it. This makes sure that it is hard (but probably not impossible) to crash your computer running managed code. However, all this fussing comes at a price, causing your programs to run more slowly. To get the maximum possible performance, and enable direct access to parts of the underlying computer system, you can mark your programs as unmanaged. An unmanaged program goes faster, but if it crashes it is capable of taking the computer with it. Switching to unmanaged mode is analogous to removing the guard from your new chainsaw because it gets in the way. C# and Objects The C# language is object oriented. Objects are an organisational mechanism which let you break your program down into sensible chunks, each of which is in charge of part of the overall system. Object Oriented Design makes large projects much easier to design, test and extend. It also lets you create programs which can have a high degree of reliability and stability. I am very keen on object oriented programming, but I am not going to tell you much about it just yet. This is not because I don't know much about it (honest) but because I believe that there are some very fundamental programming issues which need to be addressed before we make use of objects in our programs. The use of objects is as much about design as programming, and we have to know how to program before we can design larger systems. Making C# Run You actually write the program using some form of text editor - which may be part of the compiling and running system. C# is a compiled programming language. The computer cannot understand the language directly, so a program called a compiler converts the C# text into the low level instructions which are much simpler. These low level instructions are in turn converted into the actual commands to drive the hardware which runs your program. We will look in more detail at this aspect of how C# programs work a little later, for now the thing to remember is that you need to show your wonderful C# program to the compiler before you get to actually run it. A compiler is a very large program which knows how to decide if your program is legal. The first thing it does is check for errors in the way that you have used the language itself. Only if no errors are found by the compiler will it produce any output. The compiler will also flag up warnings which occur when it notices that you have done something which is not technically illegal, but may indicate that you have made a
C# What Comprises a C# Program?
C# Programming © Rob Miles 2009 22 mistake somewhere. An example of a warning situation is where you create something but don't use it for anything. The compiler would tell you about this, in case you had forgotten to add a bit of your program. The C# language is supplied with a whole bunch of other stuff (to use a technical term) which lets C# programs do things like read text from the keyboard, print on the screen, set up network connections and the like. These extra features are available to your C# program but you must explicitly ask for them. They are then located automatically when your program runs. Later on we will look at how you can break a program of your own down into a number of different chunks (perhaps so several different programmers can work on it). Creating C# Programs Microsoft has made a tool called Visual Studio, which is a great place to write programs. It comprises the compiler, along with an integrated editor, and debugger.It is provided in a number of versions with different feature sets. There is a free version, called Visual Studio Express edition, which is a great place to get started. Another free resources is the Microsoft .NET Framework. This provides a bunch of command line tools, i.e. things that you type to the command prompt, which can be used to compile and run C# programs. How you create and run your programs is up to you. I'm not going to go into details of how to download and install the .NET framework; that is for other documents, I am going to assume that you are using a computer which has a text editor (usually Notepad) and the .NET framework installed. The Human Computer Of course initially it is best if we just work through your programs on paper. I reckon that you write programs best when you are not sitting at the computer, i.e. the best approach is to write (or at least map out) your solution on paper a long way away from the machine. Once you are sitting in front of the keyboard there is a great temptation to start pressing keys and typing something in which might work. This is not good technique. You will almost certainly end up with something which almost works, which you will then spend hours fiddling with to get it going. If you had sat down with a pencil and worked out the solution first you would probably get to a working system in around half the time. Programmer’s Point:Great programmers debug less I am not impressed by hacking programmers who spend whole days at terminals fighting with enormous programs and debugging them into shape. I am impressed by someone who turns up, types in the program and makes it work first time! What Comprises a C# Program? If your mum wanted to tell you how to make your favourite fruitcake she’d write the recipe down on a piece of paper. The recipe would be a list of ingredients followed by a sequence of actions to perform on them. A program can be regarded as a recipe, but written for a computer to follow, not a cook. The ingredients will be values (called variables) that you want your program to work with. The program itself will be a sequence of actions (called statements) that are to be followed by the computer. Rather than writing the program down on a piece of paper you instead put it into a file on the computer, often called a source file. This is what the compiler acts on. A source file contains three things:
C# What Comprises a C# Program?
C# Programming © Rob Miles 2009 23
 instructions to the compiler  information about the structures which will hold the data to be stored and manipulated.  instructions which manipulate the data. To take these in turn: Controlling the Compiler . The C# compiler needs to know certain things about your program. It needs to know which external resources your program is going to use. It also can be told about any options for the construction of your program which are important. Some parts of your program will simply provide this information to tell the compiler what to do. Storing the Data Programs work by processing data. The data has to be stored within the computer whilst the program processes it. All computer languages support variables of one form or another. A variable is simply a named location in which a value is held whilst the program runs. C# also lets you build up structures which can hold more than one item, for example a single structure could hold all the information about a particular bank customer. As part of the program design process you will need to decide what items of data need to be stored. You must also decide on sensible names that you will use to identify these items. Describing the Solution The actual instructions which describe your solution to the problem must also be part of your program. A single, simple, instruction to do something is called a statement. A statement is an instruction to perform one particular operation, for example add two numbers together and store the result. The really gripping thing about programs is that some statements can change which statement is performed next, so that your program can look at things and decide what to do. In the case of C# you can lump statements together to form a lump of program which does one particular task. Such a lump is called a method. Seasoned programmers break down a problem into a number of smaller ones and make a method for each. A method can be very small, or very large. It can return a value which may or may not be of interest. It can have any name you like, and your program can contain as many methods as you see fit. One method may refer to others. The C# language also has a huge number of libraries available which you can use. These save you from "re-inventing the wheel" each time you write a program. We will look at methods in detail later in these notes. Identifiers and Keywords You give a name to each method that you create, and you try to make the name of the function fit what it does, for example ShowMenu or SaveToFile. The C# language actually runs your program by looking for a method with a special name, Main. This function is called when your program starts running, and when Main finishes, your program ends. The names that you invent to identify things are called identifiers. You also create identifiers when you make things to hold values; woodLength might a good choice when we want to hold the length of wood required. Later on we will look at the rules and conventions which you must observe when you create identifiers. The words which are part of the C# language itself are called keywords. In a recipe a keyword would be things like "mix" or "heat" or "until". They would let you say things like "heat sugar until molten" or "mix until smooth". In fact, you'll find that programs look a lot like recipes. Keywords will appear blue in our listings.
A First C# Program The Program Example
C# Programming © Rob Miles 2009 24
A First C# Program The Program Example Perhaps the best way to start looking at C# is to jump straight in with our first ever C# program. Here it is: Code Sample 1 - GlazerCalc Program This is a valid program. If you gave it to a C# compiler it would compile, and you could run it. The actual work is done by the two lines that I have highlighted. Broadly speaking the stuff before these two lines is concerned with setting things up and getting the values in to be processed. The stuff after the two lines is concerned with displaying the answer to the user. We can now go through each line in turn and try to see how it fits into our program. using System; A big part of learning to program is learning how to use all the additional features of the system which support your programs. This is an instruction to the C# compiler to tell it that we want to use things from the System namespace. A namespace is a place where particular names have meaning. We have namespaces in our conversations too, if I am using the "Football" namespace and I say "that team is really on fire" I'm saying something good. If I am using the "Firefighter" namespace I'm saying something less good. In the case of C# the System namespace is where lots of useful things are described. One of these useful things provided with C# is the Console object which will let me write things which will appear on the screen in front of the user. If I want to just refer to this as Console I have to tell the compiler I'm using the System namespace. This means that if I refer to something by a particular name the compiler will look in using System; class GlazerCalc { static void Main() { double width, height, woodLength, glassArea; string widthString, heightString; widthString = Console.ReadLine(); width = double.Parse(widthString); heightString = Console.ReadLine(); height = double.Parse(heightString); woodLength = 2 * ( width + height ) * 3.25 ; glassArea = 2 * ( width * height ) ; Console.WriteLine ( "The length of the wood is " + woodLength + " feet" ) ; Console.WriteLine("The area of the glass is " + glassArea + " square metres" ) ; } }
A First C# Program The Program Example
C# Programming © Rob Miles 2009 25
System to see if there is anything matching that name. We will use other namespaces later on. class GlazerCalc Classes are the basis of object oriented programming, as we shall see later. A C# program is made up of one or more classes. A class is a container which holds data and program code to do a particular job. In the case of our double glazing calculator the class just contains a single method which will work out our wood lengths and glass area, but a class can contain much more than that if it needs to. You need to invent an identifier for every class that you create. I've called ours GlazerCalc since this reflects what it does. For now, don't worry too much about classes, just make sure that you pick sensible names for the classes that you create. Oh, and one other thing. There is a convention that the name of the file which contains a particular class should match the class itself, in other words the program above should be held in a file called GlazerCalc.cs. static This keyword makes sure that the method which follows is always present, i.e. the word static in this context means "is part of the enclosing class and is always here". When we get to consider objects we will find that this little keyword has all kinds of interesting ramifications. But for now I'd be grateful if you'd just make sure that you put it here in order to make your programs work properly. void A void is nothing. In programming terms the void keyword means that the method we are about to describe does not return anything of interest to us. The method will just do a job and then finish. In some cases we write methods which return a result (in fact we will use such a method later in the program). However, in order to stop someone else accidentally making use of the value returned by our Main method, we are explicitly stating that it returns nothing. This makes our programs safer, in that the compiler now knows that if someone tries to use the value returned by this method, this must be a mistake. Main You choose the names of your methods to reflect what they are going to do for you. Except for Main. This method (and there must be one, and only one such method) is where your program starts running. When your program is loaded and run the first method given control is the one called Main. If you miss out the Main method the system quite literally does not know where to start. () This is a pair of brackets enclosing nothing. This may sound stupid, but actually tells the compiler that the method Main has no parameters. A parameter to a method gives the method something to work on. When you define a method you can tell C# that it works on one or more things, for example sin(x) could work on a floating point value of angle x. We will cover methods in very great detail later in this document.
A First C# Program The Program Example
C# Programming © Rob Miles 2009 26
{ This is a brace. As the name implies, braces come in packs of two, i.e. for every open brace there must be a matching close. Braces allow programmers to lump pieces of program together. Such a lump of program is often called a block. A block can contain the declaration of variable used within it, followed by a sequence of program statements which are executed in order. In this case the braces enclose the working parts of the method Main. When the compiler sees the matching close brace at the end it knows that it has reached the end of the method and can look for another (if any). The effects of an un-paired brace are invariably fatal.... double By now you probably feel that you need a drink. But that is not what double means in this context. What it means is "double precision floating point number". Our program needs to remember certain values as it runs. Notably it will read in values for the width and height of the windows and then calculate and print values for the glass area and wood length. C# calls the places where values are put variables. At the beginning of any block you can tell C# that you want to reserve some space to hold some data values. Each item you can hold a particular kind of value. Essentially, C# can handle three types of data, floating point numbers, integer numbers and text (i.e. letters, digits and punctuation). The process of creating a variable is called declaring the variable. A double variable can hold a very wide range of values to a very high precision. You declare some variables of a particular type by giving the type of the data, followed by a list of the names you want the variables to have. We are using the type double for now. Later we will use other types. width, height, woodLength, glassArea This is a list. A list of items in C# is separated by , (comma) characters. In this case it is a list of variable names. Once the compiler has seen the word double (see above) it is expecting to find the name of at least one variable which is to be created. The compiler works its way through the list, creating boxes which can hold floating point values and giving them the appropriate names. From this point on we can refer to the above names, and the compiler will know that we are using that particular variable. Programmer’s Point:Know where your data comes from In fact, given the limitations in the accuracy to which people can read tape measures, and the fact that we are not going to make any windows as wide as the universe, a double precision floating point number is probably overkill for this application. You would instead ask the customer if it is OK to just express the dimensions in millimeters instead. We will look at the considerations driving the choice of particular variable types a bit later on. ; The semicolon marks the end of the list of variable names, and also the end of that declaration statement. All statements in C# programs are separated by the ; character, this helps to keep the compiler on the right track. The ; character is actually very important. It tells the compiler where a given statement ends. If the compiler does not find one of these where it expects to see one it will
A First C# Program The Program Example
C# Programming © Rob Miles 2009 27 produce an error. You can equate these characters with the sprocket holes in film, they keep everything synchronised. string widthString, heightString; We have made some variables which can hold numbers. Now we are going to make some which can contain strings. This is because when we read the numbers from our user we first read them in as strings of text. We then convert the text into a number. The variables widthString and heightString (note the sensible names) will contain text versions of the numbers. widthString = This is an assignment statement. In this C# statement we are going to change the value in a variable. Our program is going to read a line of text from the user and place the result in the variable we have called widthString. Remember that a variable is simply a named box of a particular size, which can hold a single data item (in this case a string of text). A good proportion of your programs will be instructions to assign new values to variables, as the various results are calculated. C# uses the = character to make assignments happen. The first part of this statement is the name of a previously defined variable. This is followed by the = character which I call the gozzinta. I call it that because the value on the right gozzinta (goes into) the variable on the left. Console. On the right of the equals we have the thing which is going to be assigned to widthString. In this case the result is going to be the string returned by the method ReadLine. This method is part of an object called Console .which looks after the user input and output. ReadLine This indicates that the ReadLine method is to be invoked. This asks the running program to dash off, do whatever statements there are in this method, and then come back. Methods are a way in which you can break up your program into a number of chunks, each of which has a particular job. They also mean that you only have to write a particular piece of code once, put it in a method, and then call that method whenever you want that particular job done. The C# system contains a number of built in methods to do things for our programs. ReadLine is one of these. When this program runs the ReadLine method is invoked (or called). It will wait for the user to enter a line of text and press the Enter key. Whatever is typed in is then returned as a string by the ReadLine method. The result of the method call is placed in the widthString variable. () A method call is followed by the parameters to the method. A parameter is something that is passed into a method for it to work on. Think of it as raw materials for a process of some kind. In the case of ReadLine it has no raw materials, it is going to fetch the information from the user console. However, we still have to tell the method call something, even if it means there are no parameters being supplied
A First C# Program The Program Example
C# Programming © Rob Miles 2009 28
; We have seen the semi-colon before. It marks the end of a statement in our program. width = This is another assignment (Mr. Phelps/Hawke1). The variable width is being given a value. Many statements in your programs will simply be moving data around and performing actions on it. double. But the rest of the statement looks a bit scary. In fact it is not too tricky. We are asking Mr. double (the thing responsible holding double precision floating point numbers) to do a little job for us. In this case the little job is "take the string held by widthString and convert it into a double precision floating point number. Mr. double provides this ability by exposing a method called Parse. Note that there is nothing wrong or naughty about something in C# exposing its methods. It is how we get things done for us. When you come to design larger programs you will find that the best way to do this is to create components which expose methods to get the job done. The whole of the C# library set is provided as a series of methods and one of the things that you will have to get to grips with is where the methods are and how to use them. As with many things in life, the trick is knowing who to ask… Parse The Parse method has the job of converting the string it has been given into a double precision floating point number. To do this it must look along the string, pull out each digit in turn and then calculate the actual value, as in "12" means a ten and two units. This process of looking along things is often called parsing. Hence the name of the method we are using. The method is given the string that is to be parsed and returns the number that it has found. Note that this gives significant potential for evil, in that if the user doesn’t type in a value , or types something like "Twenty Five" the Parse method call will not be able to resolve a number and will fail as a result. How it fails, and how you can resolve this failure, will be left for a future section in order to add more excitement to this document. (widthString); We have seen that a call of a method must be followed by the raw materials (parameters) for that method. In the case of ReadLine there are no parameters, but we still need to supply an empty list to indicate this. In the case of Parse the method needs to be given the string that it is to work on. We do this by putting the name of the string variable containing the text (widthString) into the brackets as above. The value of the information in widthString (i.e. the text that the user has typed in) is passed into the Parse method for it to look at and extract the number from. 1 Obscure movie/TV show reference for you there folks.
A First C# Program The Program Example
C# Programming © Rob Miles 2009 29 heightString = Console.ReadLine(); height = double.Parse(heightString); These two statements simply repeat the process of reading in the text of the height value and then converting it into a double precision value holding the height of the window. woodLength = 2*(width + height)*3.25 ; This is the actual nub of the program itself. This is the bit that does the work. It takes the height and width values and uses them to calculate the length of wood required. When I write programs I use brackets even when the compiler does not need them. This makes the program clearer. The calculation is an expression much like above, this time it is important that you notice the use of parenthesis to modify the order in which values are calculated in the expression. Normally C# will work out expressions in the way you would expect, i.e. all multiplication and division will be done first, followed by addition and subtraction. In the above expression I wanted to do some parts first, so I did what you would do in mathematics, I put brackets around the parts to be done first. Note that I use a factor of 3.25 to allow for the fact that the customer wants the length of wood in feet. There are around 3.25 feet in a meter, so I multiply the result in meters by this factor. The + and * characters in the expression are called operators in that they cause an operation to take place. The other items in the expression are called operands. These are what the operators work on. glassArea = 2 * ( width * height ) ; This line repeats the calculation for the area of the glass. Note that the area is given in square meters, so no conversion is required. I've put one multiplication in brackets to allow me to indicate that I am working out two times the area (i.e. for two panes of glass). There is no need to do this particularly, but I think it makes it slightly clearer. Console.WriteLine This is a call of a method, just like the ReadLine method, except that this one takes what it is given and then prints it out on the console. ( This is the start of the parameters for this method call. We have seen these used in the calls of Parse and also ReadLine "The length of the wood is " This is a string literal. It is a string of text which is literally just in the program. The string of text is enclosed in double quote characters to tell the compiler that this is part of a value in the program, not instructions to the compiler itself. + Plus is an addition operator. We have seen it applied to add two integers together. However, the plus here means something completely different 2. In this case it means "add two strings together". 2 Another TV show reference
A First C# Program The Program Example
C# Programming © Rob Miles 2009 30
You will have to get used to the idea of context in your programs. We have seen this with namespaces. Here it is with operators. The C# system uses the context of an operation to decide what to do. In the case of the previous +, between two double precision floating point numbers it means "do a sum". Here it has a string on the left hand side. This means that it is going to perform string concatenation rather than mathematical addition. woodLength This is another example of context at work. Previously we have used woodLength as a numeric representation of a value, in this program the length of the wood required. However, in the context it is being used at the moment (added to the end of a string) it cannot work like that. The C# compiler must therefore ask the woodLength data item to convert itself into a string so it can be used correctly in this position. Fortunately it can do this, and so the program works as you would expect. It is very important that you understand precisely what is going on here. Consider: Console.WriteLine ( 2.0 + 3.0 ); This would perform a numeric calculation (2.0 + 3.0) and produce a double precision floating point value. This result value would then be asked to provide a string version of itself to be printed, giving the output: 5 But the line of code: Console.WriteLine ( "2.0" + 3.0 ); Would regard the + as concatenating two strings. It would ask the value 3 to convert itself into a string (sounds strange – but this is what happens. It would then produce the output: 2.03 The string "2.0" has the text of the value 3.0 added on the end. This difference in behavior is all because of the context of the operation that is being performed. You can think of all of the variables in our program being tagged with metadata (there is that word again) which the compiler uses to decide what to do with them. The variable heightString is tagged with information that says "this is a string, use a plus with this and you concatenate". The variable woodLength is tagged with metadata which says "this is a double precision floating point value, use a plus with this and you perform arithmetic". + " feet" Another concatenation here. We are adding the word feet on the end. Whenever I print a value out I always put the units on the end. This makes it much easier to ensure that the value makes sense. ) The bracket marks the end of the parameter being constructed for the WriteLine method call. When the method is called the program first assembles a completed string out of all the components, adding (or concatenating) them to produce a single result. It then passes the resulting string value into the method which will print it out on the console.
A First C# Program The Program Example
C# Programming © Rob Miles 2009 31
; The semi-colon marks the end of this statement. } Now for some really important stuff. The program is essentially complete. We have added all the behaviours that we need. However, the compiler still needs to be told that we have reached the end of the program. This first close brace marks the end of the block of code which is the body of the Main method. A block of code starts with a { and ends with a }. When the compiler sees this it says to itself "that is the end of the Main method". } The second closing brace has an equally important job to the first. It marks the end of the class GlazerCalc. In C# everything exists inside a class. A class is a container for a whole bunch of things, including methods. If we want to (and we will do this later) we may put a number of methods into a class. For now however, we only want the one method in the class. And so we use the second closing brace to mark the end of the class itself. Programmer’s Point:Program layout is very important You may have noticed the rather attractive layout that I have used when I wrote the program. Items inside braces are indented so that it is very clear where they belong. I do not do this because I find such listings artistically pleasing. I do it because otherwise I am just about unable to read the program and make sense of what it does. JustlikeIfindithardtoreadenglishwithouttheproperspacing I find it hard to read a program if it has not been laid out correctly. Punctuation That marks the end of our program. One of the things that you will have noticed is that there is an awful lot of punctuation in there. This is vital and must be supplied exactly as C# wants it, otherwise you will get what is called a compilation error. This simply indicates that the compiler is too stupid to make sense of what you have given it! You will quickly get used to hunting for and spotting compilation errors, one of the things you will find is that the compiler does not always detect the error where it takes place, consider the effect of missing out a "(" character. However, note that just because the compiler reckons your program is OK is no guarantee of it doing what you want! Another thing to remember is that the layout of the program does not bother the compiler, the following is just as valid: - although if anyone writes a program which is laid out this way they will get a smart rap on the knuckles from me! using System;class GlazerCalc{static void Main(){double width, height, woodLength, glassArea;string widthString, heightString;widthString = Console.ReadLine();width = double.Parse(widthString);heightString = Console.ReadLine();height = double.Parse(heightString);woodLength = 2 * ( width + height ) * 3.25 ;glassArea = 2 * ( width * height ) ;Console.WriteLine ( "The length of the wood is " + woodLength + " feet" ) ;Console.WriteLine( "The area of the class is " + glassArea + " square metres" ) ;}}
Manipulating Data Variables and Data
C# Programming © Rob Miles 2009 32
The grammar of programs is something you will pick up as we look at more and more of them.... Manipulating Data In this section we are going to take a look at how we can write programs that manipulate data, how values can be stored, retrieved and generally fiddled with. This provides us with the ability to perform the data processing part of programs. Variables and Data In the glazing program above we decided to hold the width and the height of the windows that we are working on in variables that we described as double. Before we can go much further in our programming career we need to consider just what this means, and what other types of data we can store in programs that we write. Programs operate on data. A programming language must give you a way of storing the data you are processing, otherwise it is useless. What the data actually means is something that you as programmer decide (see the above digression on data). A variable is a named location where you can store something. You can think of it as a box of a particular size with a name painted on the box. You chose the name to reflect what is going to be stored there (we used sensible names like woodLength in the above program). You also need to choose the type of the variable (particular size and shape of box) from the range of storage types which C# provides. The type of the variable is part of the metadata about that variable. Programs also contain literal values. A literal value is just a value in your program which you use for some purpose. For each type of variable the C# language has a way in which literal values of that type are expressed. Types of Variables Storing Numbers When considering numeric values there are two kinds of data:  Nice chunky individual values, for example the number of sheep in a field, teeth on a cog, apples in a basket. These are referred to as integers.  Nasty real world type things, for example the current temperature, the length of a piece of string, the speed of a car. These are referred to as reals. In the first case we can hold the value exactly; you always have an exact number of these items, they are integral. When you are writing a specification you should worry about the precision to which values are to be held. Too much accuracy may slow the machine down - too little may result in the wrong values being used. In the second case we can never hold what we are looking at exactly. Even if you measure a piece of string to 100 decimal places it is still not going to give you its exact length - you could always get the value more accurately. These are real. A computer is digital, i.e. it operates entirely on patterns of bits which can be regarded as numbers. Because we know that it works in terms of ons and offs it has problems holding real values. To handle real values the computer actually stores them to a limited accuracy, which we hope is adequate (and usually is).
Manipulating Data Types of Variables
C# Programming © Rob Miles 2009 33
This means that when we want to store something we have to tell the computer whether it is an integer or a real. We also need to consider the range of possible values that we need to hold so that we can choose the appropriate type to store the data. You tell C# about a variable you want to create by declaring it. The declaration also identifies the type of the thing we want to store. Think of this as C# creating a box of a particular size, specifically designed to hold items of the given type. The box is tagged with some metadata (there is that word again) so that the system knows what can be put into it and how that box can be used. Storing integer values Integers are the easiest type of value for the computer to store. Each value will map onto a particular pattern of bits. The only issue is one of range. The bigger the value the larger the number of bits that you need to represent it. C# provides a variety of integer types, depending on the range of values you would like to store: sbyte 8 bits -128 to 127 byte 8 bits 0 to 255 short 16 bits -32768 to 32767 ushort 16 bits 0 to 65535 int 32 bits -2147483648 to 2147483647 uint 32 bits 0 to 4294967295 long 64 bits -9223372036854775808 to 9223372036854775807 ulong 64 bits 0 to 18446744073709551615 char 16 bits 0 to 65535 Note that we can go one further negative than positive. This is because the numbers are stored using "2's complement" notation The standard integer type, int, can hold frighteningly large numbers in C#, in the range -2,147,483,648 to 2,147,483,647 If you want to hold even larger integers than this (although I've no idea why you'd want this) there is a long version. An example of an int variable would be something which kept track of the number of sheep in a field: int numberOfSheep; This creates a variable with could keep track of over two thousand million sheep! It also lets a program manipulate "negative sheep" which is probably not meaningful (unless you run a sheep bank of course and let people owe you them). Remember that the language itself is unaware of any such considerations. If you want to make sure that we never have more than 1,000 sheep and the number of sheep never goes negative you must add this behaviour yourself. Programmer’s Point:Check your own maths Something else which you should bear in mind is that a program will not always detect when you exceed the range of a variable. If I put the value 255 into a variable of type byte this is OK, because 255 is the biggest possible value of the type can hold. However, if I add one to the value in this variable the system may not detect this as an error. In fact this may cause the value to "wrap round" to 0. Which could cause my program big problems.
Manipulating Data Types of Variables
C# Programming © Rob Miles 2009 34 integer literal values An integer literal is expressed as a sequence of digits with no decimal point: 23 This is the integer value 23. I could use it in my program as follows: numberOfSheep = 23 ; If I am using one of the "shorter" types the literal value is regarded by the compiler as being of that type: sbyte tinyVal = 127; In this statement the 127 is regarded as an sbyte literal, not an integer. This means that if I do something stupid: sbyte tinyVal = 128; (the maximum value that an sbyte can hold is 127) the compiler will detect that I have made a mistake and the program will not compile. Storing real values "Real" is a generic term for numbers which are not integers. They have a decimal point and a fractional part. Depending on the value the decimal point floats around in the number, hence the name. C# C# provides a type of box which can hold a real number. A standard float value has a range of 1.5E-45 to 3.4E48 with a precision of only 7 digits (i.e. not as good as most pocket calculators). If you want more precision (although of course your programs will be use up more computer memory and run more slowly) you can use a double box instead (double is an abbreviation for double precision). This is takes up more computer memory but it has a range of 5.0E-324 to 1.7E308 and a precision of 15 digits. An example of a float variable could be something which held the average price of ice cream: float averageIceCreamPriceInPence; An example of a double variable could be something which held the width of the universe in inches: double univWidthInMeters; Finally, if you want the ultimate in precision but require a slightly smaller range you can use the decimal type. This uses twice the storage space of a double and holds values to a precision of 28-29 digits. It is used in financial interest calculations. decimal robsOverdraft; real literal values There are two ways in which you can store floating point numbers; as float or as double. When it comes to putting literal values into the program itself the compiler likes to know if you are writing a floating point value (smaller sized box) or double precision (larger sized box). A float literal can be expressed as a real number with an f after it: 2.5f A double literal is expressed as a real number without the f:
Manipulating Data Types of Variables
C# Programming © Rob Miles 2009 35
3.5 You can also use exponents to express double and float values: 9.4605284E15 This is a double precision literal value which is actually the number of meters in a light year. If you put an f on the end it becomes a floating point literal value. Unlike the way that integers work, with real numbers the compiler is quite fussy about how they can and can't be combined. This is because when you move a value from a double precision variable into an ordinary floating point one some of the precision is lost. This means that you have to take special steps to make sure that you as programmer make clear that you want this to happen and that you can live with the consequences. This process is known as casting and we will consider it in detail a bit later in these notes. Programmer’s Point:Simple variables are probably best You will find that I, and most programmers, tend to use just integers and floating point variable types. This may seem wasteful (it is most unlikely I'll ever need to keep track of two thousand million sheep) but it makes the programs easier to understand. Storing Text Sometimes the information we want to store is text. This can be in the form of a single character, at other times it will be a string. C# provides variables for looking after both of these types of information: char variables A char is type of variable which can hold a single character. A character is what you get when you press a key on a keyboard or display a single, er, character on the screen. Note that C# can use a character set called UNICODE which can handle over 65,000 different character designs including a wide range of foreign characters. An example of a character variable could be something which held the command key that the user has just pressed: char commandKey; char literal values You express a character by enclosing it in single quotes: 'A' This means "the character A". It is what your program would get if you asked it to read a character off the keyboard and the user held down shift and pressed A. Character Escape Sequences This leads to the question "How do we express the ' (single quote) character". This is achieved by the use of an escape sequence. This is a sequence of characters which starts with a special escape character. Escape in this context means "escape from the normal hum-drum conventions of just meaning what you are and let's do something special". The escape character is the \ (backslash) character. Possible escape sequences are:
Manipulating Data Types of Variables
C# Programming © Rob Miles 2009 36
Character Escape Sequence name ' Single quote " Double quote \ Backslash \0 Null \a Alert \b Backspace \f Form feed \n New line \r Carriage return \t Horizontal tab \v Vertical quote The effect of these escape sequences depends on the device you send them to. Some systems will make a beep when you send the Alert character to them. Some clear the screen when you send the Form feed character. You can use them as follows: char beep = '\a' ; Note that the a must be in lower case. Character code values We have already established that the computer actually manipulates numbers rather than actual letters. C# uses the Unicode standard to map characters onto numbers that represent them. If you wish, you can express a character literal as a value from the Unicode character set. The good news is that this gives you access to a huge range of characters (as long as you know the codes for them). The bad news is that you must express this value in hexadecimal which is a little bit harder to use than decimal. The best news of all is that you probably don't need to do this kind of thing very often, if at all. As an example however, I happen to know that the Unicode value for capital a (A) is 65. This is represented in hexadecimal (base 16) as four sixteens and a single one (i.e. 41). I can therefore put this in my program as: char capitalA = '\x0041' ; Note that I had to put leading zeroes in front of the two hex digits. string variables A type of box which can hold a string of text. In C# a string can be very short, for example "Rob", or it can be very long, for example "War and Peace" (that is the book not the three words). A string variable can hold a line of text. However, because there are special characters which mean "take a new line" (see above) it is perfectly possible for a single string to hold a large number of lines of text. An example of a string variable could be something which holds the line that the user has just typed in:
Manipulating Data Types of Variables
C# Programming © Rob Miles 2009 37 string commandLine; string literal values A string literal value is expressed enclosed in double quotes: "this is a string" The string can contain the escape sequences above: "\x0041BCDE\a" If we print this string it would print out: ABCDE - and try to ring the bell. If I am just expressing text with no escape characters or anything strange I can tell the compiler that this is a verbatim string. I do this by putting an @ in front of the literal: @"\x0041BCDE\a" If I print this string I get: \x0041BCDE\a This can be useful when you are expressing things like file paths. The verbatim character has another trick, which is that you can use it to get string literals to extend over several lines: @"The quick brown fox jumps over the lazy dog" This expresses a string which extends over three lines. The line breaks in the string are preserved when it is stored. bool variables A bool (short for boolean) variable is a type of box which can hold whether or not something is true. Sometimes that is all you want. If you are storing whether or not a subscription has been paid or not there is no need to waste space by using a type which can hold a large number of possible values. Instead you just need to hold the states true or false. These are the only two values which the bool type allows. An example of a bool variable could be one which holds the state of a network connection: bool networkOK; bool literal values These are easily expressed as either true or false: networkOK = true ; Programmer’s Point:Think about the type of your variables Choosing the right type for a variable is something of a skill. I tend to use floating point storage only as a last resort. They introduce a lack of precision that I am not too keen on. I find that with a little bit of ingenuity I can work in integers quite comfortably. For example, rather than store the price of an item as 1.5 pounds (needing the use of float) I will store the price as 150 pence.
Manipulating Data Identifiers
C# Programming © Rob Miles 2009 38
Also when considering how to store data it is important to remember where it comes from. In the example above I've used the double type to hold the width and height of a window. This is really stupid. It does not take into account the precision required or indeed how accurately the window can be measured. I would suspect that my glazing salesman will not be able to measure to an accuracy greater than 1 mm and so it would make sense to only store the data to that precision. This illustrates another metadata consideration, when you are given the prospect of storing floating point information; find out how it is being produced before you decide how it will be stored. As an example, you might think that being asked to work with the speed of a car you would have to store a floating point value. However, when you find out that the speed sensor only gives answers to an accuracy of 1 mile per hour, this makes the job much simpler. Identifiers In C# an identifier is a name that the programmer chooses for something in the program. The name of a variable is more properly called an identifier. We will see other places where we create identifiers. C# has some rules about what constitutes a valid identifier:  All identifiers names must start with a letter.  After the letter you can have either letters or numbers or the underscore "_" character. Upper and lower case letters are different, i.e. Fred and fred are different identifiers. Here are a few example declarations, one of which are not valid (see if you can guess which one and why) : int fred ; float jim ; char 29yesitsme ; One of the golden rules of programming, along with "always use the keyboard with the keys uppermost" is: Always give your variables meaningful names. According to the Mills and Boon romances that I have read, the best relationships are meaningful ones. The convention in C# for the kind of variables that we are creating at the moment is to mix upper and lower case letters so that each word in the identifier starts with a capital: float averageIceCreamPriceInPence; This is sometimes called camel case, presumably because of the "humps" in the identifier which are caused by the capitals. Programmer’s Point:Think about the names of your variables Choosing variable names is another skill you should work at. They should be long enough to be expressive but not so long that your program lines get too complicated. Perhaps the name averageIceCreamPriceInPence is a bit over the top in this respect. But I could live with it. Remember that you can always do sensible things with your layout to make the program look OK: averageIceCreamPriceInPence = computedTotalPriceInPence / numberOfIceCreams;
Manipulating Data Giving Values to Variables
C# Programming © Rob Miles 2009 39
Giving Values to Variables Once we have got ourselves a variable we now need to know how to put something into it, and get the value out. C# does this by means of an assignment statement. There are two parts to an assignment, the thing you want to assign and the place you want to put it, for example consider the following: class Assignment { static void Main () { int first, second, third ; first = 1 ; second = 2 ; second = second + first ; } } The first part of the program should be pretty familiar by now. Within the Main function we have declared three variables, first, second and third. These are each of integer type. The last three statements are the ones which actually do the work. These are assignment statements. An assignment gives a value to a specified variable, which must be of a sensible type (note that you must be sensible about this because the compiler, as we already know, does not know or care what you are doing). The value which is assigned is an expression. The equals in the middle is there mainly to confuse us, it does not mean equals in the numeric sense; I like to think of it as a gozzinta (see above). Gozzintas take the result on the right hand side of the assignment and drop it into the box on the left, which means that: 2 = second + 1; - is a piece of programming naughtiness which would cause all manner of nasty errors to appear. Expressions An expression is something which can be evaluated to produce a result. We can then use the result as we like in our program. Expressions can be as simple as a single value and as complex as a large calculation. They are made up of two things, operators and operands. Operands Operands are things the operators work on. They are usually literal values or the identifiers of variables. In the program above first, second, third are identifiers and 2 is a literal value. A literal value is something which is literally there in the code. A literal value has a type associated with it by the compiler. Operators Operators are the things which do the work: They specify the operation to be performed on the operands. Most operators work on two operands, one each side. In the program above + is the only operator. Here are a few example expressions: 2 + 3 * 4 -1 + 3 (2 + 3) * 4 These expressions are worked out (evaluated) by C# moving from left to right, just as you would yourself. Again, just as in traditional maths all the multiplication and division is performed first in an expression, followed by the addition and subtraction.
Manipulating Data Changing the Type of Data
C# Programming © Rob Miles 2009 40
C# does this by giving each operator a priority. When C# works out an expression it looks along it for all the operators with the highest priority and does them first. It then looks for the next ones down and so on until the final result is obtained. Note that this means that the first expression above will therefore return 14 and not 20. If you want to force the order in which things are worked out you can put brackets around the things you want done first, as in the final example. You can put brackets inside brackets if you want, provided you make sure that you have as many open ones as close ones. Being a simple soul I tend to make things very clear by putting brackets around everything. It is probably not worth getting too worked up about this expression evaluation as posh people call it; generally speaking things tend to be worked out how you would expect them. For completeness here is a list of all operators, what they do and their precedence (priority). I am listing the operators with the highest priority first. op. Use - unary minus, the minus that C# finds in negative numbers, e.g. -1. Unary means applying to only one item. * multiplication, note the use of the * rather than the more mathematically correct but confusing x. / division, because of the difficulty of drawing one number above another on a screen we use this character instead + Addition. - subtraction. Note that we use exactly the same character as for unary minus. This is not a complete list of all the operators available, but it will do for now. Because these operators work on numbers they are often called the numeric operators. But of course you should remember that some of them (for example +) can be used between other types of data as well. It is also possible to use operators in a way which causes values to be moved from one type to another. This can cause problems as we shall see now: Changing the Type of Data Whenever I move a value from one type to another the C# compiler gets very interested in what I am doing. It worries about whether or not the operation I'm about to perform will cause data to be lost from the program. It considers every operation in terms of "widening and narrowing" values. Widening and Narrowing The general principle which C# uses is that if you are "narrowing" a value it will always ask you to explicitly tell it that this is what you want to do. If you are widening there is no problem. To understand what we mean by these terms we could consider suitcases. If I am packing for a trip I will take a case. If I decide to switch to a smaller case I will have to take everything out of the large case and put it into the smaller one. But it might not have room, so I have to leave behind one of my shirts. This is "narrowing". However, if I change to a bigger case there is no problem. The bigger case will take everything that was in the smaller case, and have room for more.
Manipulating Data Changing the Type of Data
C# Programming © Rob Miles 2009 41
In C# terms the "size" of a type is the range of values (the biggest and smallest) and the precision (the number of decimal places). This means that if I write: int i = 1 ; float x = i; This works fine because the floating point type can hold all the values supported by the integer type. However: float x = 1; int i = x ; - would cause the compiler to complain (even though at the moment the variable x only holds an integer value). The compiler is concerned that you may be discarding information by such an assignment and treats it as an error. Note that this applies within a floating point values as well, for example: double d = 1.5; float f = d ; - would cause an error as well, since the compiler knows that a double is wider than a float. Casting We can force C# to regard a value as being of a certain type by the use of casting. A cast takes the form of an additional instruction to the compiler to force it to regard a value in a particular way. You cast a value by putting the type you want to see there in brackets before it. For example: double d = 1.5; float f = (float) d ; In the above code the message to the compiler is "I don't care that this assignment could cause the loss of information. I, as the writer of the program, will take the responsibility of making sure that the program works correctly". You can regard casting as the compiler's way of washing its hands of the problem. If a program fails because data is lost it is not because the compiler did something silly. As we saw above, each type of variable has a particular range of possible values, and the range of floating point values is much greater than that for integers. This means that if you do things like this: int i ; i = (int) 123456781234567890.999 ; I do not think of this as a failing in C#. It gives you great flexibility, at the cost of assuming you know what you are doing.... - the cast is doomed to fail. The value which gets placed in i will be invalid. Nowhere in C# does the language check for mistakes like this. It is up to you when you write your program to make sure that you never exceed the range of the data types you are using - the program will not notice but the user certainly will! A cast can also lose information in other ways: int i ; i = (int) 1.999 ; The code above takes 1.999 (which would be compiled as a value of type double) and casts it to int. This process discards the fractional part, which means that the variable I will end up with the value 1 in it, even though the original number was much closer to 2. You should remember that this truncation takes place whenever you cast from a value with a fractional part (float, double, decimal) into one without.
Manipulating Data Types of Data in Expressions
C# Programming © Rob Miles 2009 42
Casting and Literal Values We have seen that you can put "literal" values into your program. These are just values you want to use in your calculations. For example, in our double glazing program we had to multiply the wood length in meters by 3.25 to convert the length value from meters to feet (there are about 3.25 feet in a meter). C# keeps careful track of the things that it is combining, and this includes how it allows literal values to be used. This is so that statements like: int i ; i = 3.4 / "stupid" ; - will be treated with the contempt they richly deserve. The C# compiler knows that it is daft to divide the value 3.0 by the string "stupid". However, consider this: float x ; x = 3.4 ; This code looks perfectly legal. However, it is not. This is because the literal value 3.4 is a double precision value when expressed as a literal, and the variable x has been declared as a floating point. If I want to put a floating point literal value into a floating point variable I can use casting: float x ; x = (float) 3.4 ; This casts the double precision literal into a floating point value, so that the assignment works. To make life easier the creators of C# have added a different way we can express a floating point literal value in a program. If you put an f after the value this is regarded as a floating point value. This means that: float x ; x = 3.4f ; - would compile correctly. Types of Data in Expressions When C# uses an operator, it makes a decision as to the type of the result that is to be produced. Essentially, if the two operands are integer, it says that the result should be integer, if the two are floating point, it says that the result should be floating point. This can lead to problems, consider the following: 1/2 1/2.0 You might think that these would give the same result. Not so. The compiler thinks that the first expression, which involves only integers, should give an integer result. It therefore would calculate this to be the integer value 0 (the fractional part is always truncated). The second expression, because it involves a floating point value would however be evaluated to give a double precision floating point result, the more accurate answer of 0.5. The way that an operator behaves depends on the context of its use. Later on we will see that the + operator, which normally performs a numeric calculation, can be used between strings to concatenate them together, i.e. "Ro" + "b" would give the result "Rob". If you want complete control over the particular kind of operator the compiler will generate for you the program must contain explicit casts to set the correct context for the operator.
Manipulating Data Programs and Patterns
C# Programming © Rob Miles 2009 43 using System; class CastDemo { static void Main () { int i = 3, j = 2 ; float fraction ; fraction = (float) i / (float) j ; Console.WriteLine ( "fraction : " + fraction ) ; } } The (float) cast in the above tells the compiler to regard the values in the integer variables as floating point ones, so that we get 1.5 printed out rather than 1. Programmer’s Point:Casts can add clarity I tend to put the casts in even if they are not needed, this can make the program clearer. It may not affect the result of the calculation but it will inform the reader of what I am trying to do. Programs and Patterns At this point we can revisit our double glazing program and look at the way that it works. The code that actually does the work boils down to just a few lines which read in the data, store it in an appropriate type of location and then uses the stored values to calculate the result that the user requires: string widthString = Console.ReadLine(); double width = double.Parse(widthString); string heightString = Console.ReadLine(); height = double.Parse(heightString); woodLength = 2 * ( width + height ) * 3.25 ; glassArea = 2 * ( width * height ) ; Console.WriteLine ( "The length of the wood is " + woodLength + " feet" ) ; Console.WriteLine("The area of the class is " + glassArea + " square metres" ) ; The interesting thing about this is that it is a pattern of behaviour which can be reused time and time again. As an example, consider another friend of yours, who runs a chemist shop. He wants a program that will work out the total cost of tablets that he buys, and the number of bottles that he needs. He enters the cost of the tablets and the number he wants. The tablets are always sold in bottles of 100. You can very easily modify your program to do this job, the only hard part is figuring out how many bottles that are needed for a particular number of tablets. If you just divide the number of tablets by 100 an integer division will give you the wrong answer (for any number of tablets less than 100 your program will tell you that 0 bottles are needed). One way to solve this is to add 99 to the number of tablets before you perform the division, forcing the number of bottles required to "round up" any number of tablets greater than 0. This makes the active part of the program as follows: int bottleCount = ((tabletCount + 99) / 100) ; int salePrice = bottleCount * pricePerBottle ; We can then put the rest of the code around this to make a finished solution:
Writing a Program Software as a story
C# Programming © Rob Miles 2009 44 string pricePerBottleString = Console.ReadLine(); int pricePerBottle = int.Parse(pricePerBottleString); string tabletCountString = Console.ReadLine(); int tabletCount = int.Parse(tabletCountString); int bottleCount = ((tabletCount + 99) / 100) ; int salePrice = bottleCount * pricePerBottle ; Console.WriteLine ( "The number of bottles is " + bottleCount ) ; Console.WriteLine("The total price is " + salePrice ) ; [Remember that if you divide two integers the result is always rounded down and the fractional part discarded. ] The interesting thing here is that the program for the chemist is actually just a variation on the program for the double glazing salesman. Both conform to a pattern of behaviour (read data in, process it, print it out) which is common to many applications. Any time that you are asked to write a program that reads in some data, works out some answers and then prints out the result you can make use of this pattern. Part of the skill of a programmer is identifying the nature of a problem in terms of the best pattern to be used to solve it. Writing a Program The programs that we have created up until now have been very simple. They just read data in, do something with it and then print out the result. However, we will need to create programs which do things which are more complex that this. They may have to make a decision based on the data which they are given. They may need to repeat things until something is true. They may need to read in a large amount of data and then process that in a number of different ways. In this section we are going to consider how we can give our programs that extra level of complexity, and look at the general business of writing programs. Software as a story Some people say that writing a program is a bit like writing a story. I'm not completely convinced that this is true. I have found that some computer manuals are works of fiction, but programs are something else. I think that while it is not a story as such, a good program text does have some of the characteristics of good literature:  It should be easy to read. At no point should the hapless reader be forced to backtrack or brush up on knowledge that the writer assumes is there. All the names in the text should impart meaning and be distinct from each other.  It should have good punctuation and grammar. The various components should be organised in a clear and consistent way.  It should look good on the page. A good program is well laid out. The different blocks should be indented and the statements spread over the page in a well formed manner.  It should be clear who wrote it, and when it was last changed. If you write something good you should put your name on it. If you change what you wrote you should add information about the changes that you made and why.
Writing a Program Program Flow
C# Programming © Rob Miles 2009 45
Comments A big part of a well written program is the comments that the programmer puts there. A program without comments is a bit like an aeroplane which has an autopilot but no windows. There is a chance that it might take you to the right place, but it will be very hard to tell where it is going from the inside. Block Comments When the C# compiler sees the "/*" sequence which means the start of a comment it says: Aha! Here is a piece of information for greater minds than mine to ponder. I will ignore everything following until I see a */ which closes the comment. As an example: /* This program works out glass and wood required for a double glazing salesman. */ Be generous with your comments. They help to make your program much easier to understand. You will be very surprised to find that you quickly forget how you got your program to work. You can also use comments to keep people informed of the particular version of the program, when it was last modified and why, and the name of the programmer who wrote it - if you dare! Line Comments Another form of comment makes use of the // sequence. This marks the start of a comment which extends to the end of that particular line of code. It is useful for putting a quick note on the end of a statement: position = position + 1 ; //move on to the next customer I've annotated the statement to give the reader extra information about what it actually does. Programmer’s Point:Don't add too much detail Writing comments is a very sensible thing to do. But don't go mad. Remember that the person who is reading your program can be expected to know the C# language and doesn't need things explained to them in too much detail: goatCount = goatCount + 1 ; // add one to goatCount This is plain insulting to the reader I reckon. If you chose sensible identifiers you should find that your program will express most of what it does directly from the code itself. Program Flow Our first double glazing program is very simple, it runs straight through from the first statement to the last, and then stops. Often you will come across situations where your program must change what it does according to the data which is given to it. Basically there are three types of program flow: 1. straight line 2. chosen depending on a given condition 3. repeated according to a given condition
Writing a Program Program Flow
C# Programming © Rob Miles 2009 46
Every program ever written is composed of the three elements above, and very little else! You can use this to good effect when designing an overall view of how your program is going to work. At the moment we have only considered programs which run in a straight line and then stop. The path which a program follows is sometimes called its "thread of execution". When you call a function the thread of execution is transferred into the function until it is complete. Conditional Execution - if The program above to work out the wood and glass for our glazing man is nice, in fact our customer will probably be quite pleased with it. However, it is not perfect. The problem is not with the program, but with the user. If you give the program a window width of -1 it goes ahead and works out a stupid result. Our program does not have any checking for invalid widths and heights. The user might have grounds for complaint if the program fails to recognise that he has given a stupid value, in fact a number of cases are currently being fought in the United States courts where a program has failed to recognise invalid data, produced garbage and caused a lot of damage. What we want to do is notice the really stupid replies and tell the user that he has done something dubious. In our program specification, which we give the customer, we have said something like (this is our metadata): The program will reject window dimensions outside the following ranges: width less than 0.5 metres width greater than 5.0 metres height less than 0.75 metres height greater than 3.0 metres This means that we have done all we can; If the program gets 1 rather than 10 for the width then that is the users' problem, the important thing from our point of view is that the above specification stops us from being sued! In order to allow us to do this the program must notice naughty values and reject them. To do this we can use the construction: if (condition) statement or block we do if the condition is true else statement or block we do if the condition is false The condition determines what happens in the program. So what do we mean by a condition? C# has a way in which true and false can be explicitly stated in a program. We have already seen that the bool type is used to store this logical state. We can create conditions which return a logical result. These are called "logical conditions". Which is logical. The simplest condition is simply the value true or false, for example: if (true) { Console.WriteLine ( "hello mum" ) ; } This is valid, although rather useless as the condition is always true, so "hello mum" is always printed (note that we left the else portion off - this is OK because it is optional). Conditions and Relational Operators To make conditions work for us we need a set of additional relational operators which we can use to in logical expressions. Relational operators work on operands, just like
Writing a Program Program Flow
C# Programming © Rob Miles 2009 47 numeric ones. However any expression involving them can only produce one of two values, true or false. Relational operators available are as follows: == equals. If the left hand side and the right hand side are equal the expression has the value true. If they are not equal the value is false. 4 == 5 - would evaluate to false. Note that it is not particularly meaningful to compare floating point values in this way. Because of the fact that they are held to limited precision you might find that conditions fail when they should not for example the following equation: x = 3.0 * (1.0 / 3.0) ; - may well result in x containing 0.99999999, which would mean that: x == 1.0 If you want to compare floating point values subtract them and see if the difference is very small. - would be false - even though mathematically the test should return true. != not equal. The reverse of equals. If the operands are not equal the expression has the value true, if they are equal it has the value false. Again, this test is not advisable for use with floating point numbers. < less than. If the operand on the left is less than the one on the right the value of the expression is true. If the left hand operand is larger than or equal to the right hand one the expression gives false. It is quite valid to compare floating point numbers in this way. > greater than. If the operand on the left is greater than the one on the right the result is true. If the operand on the left is less than or equal to the one on the right the result is false. = greater than or equal to. If the operand on the left is greater than or equal to the one on the right you get true, otherwise it is false. ! not. This can be used to invert a particular value or expression, for example you can say !true, which is false, or you could say: !(x==y) - which means the same as (x!=y). You use not when you want to invert the sense of an expression.
Writing a Program Program Flow
C# Programming © Rob Miles 2009 48
Combining Logical Operators Sometimes we want to combine logical expressions, to make more complicated choices, for example to test for a window width being valid we have to test that it is greater than the minimum and less than the maximum. C# provides additional operators to combine logical values: && and. If the operands each side of the && are true the result of the && is true. If one of them is false the result is false, for example (width > 0.5) && (width < 5.0) - this would be true if the width was valid according to our above description. || or. If either of the operands each side of the || are true the result of the expression is true. The expression is only false if both operands are false, for example: (width = 5.0) De Morgans theorem is the basis of this. - this would be true if the width was invalid. We are saying that the width is invalid if it is less than the minium or larger than the maximum. Note that to reverse the sense of the condition (i.e. true when the value is invalid) we not only have to change the > into 5.0 ){ Console.WriteLine ("Width too big,using maximum\n") ; width = 5.0 ; } The two statements are now a block, which is performed only if width is greater than 5.0. You can lump many hundreds of statements together in this way, the compiler does not mind. You can also put such blocks of code inside other blocks, this is called nesting. The number of { and } characters must agree in your program, otherwise you will get strange and incomprehensible errors when the compiler hits the end of the file in the middle of a block or reaches the end of your program half way down your file!
Writing a Program Program Flow
C# Programming © Rob Miles 2009 49
I make things much easier to understand by indenting a particular block by a number of spaces, i.e. each time I open a block with the { character I move my left margin in a little way. I can then see at a glance whereabouts I am in the levels at any time. Metadata, Magic Numbers and const A magic number is a value with a special meaning. It will never be changed within the program; it is instead a constant which is used within it. When I write my glazing program I will include some magic numbers which give the maximum and minimum values for heights and widths. These come from the metadata I was so careful to gather when I wrote the specification for the program. Now I could just use the values 0.5, 5.0, 0.75 and 3.0 - but these are not packed with meaning and make the program hard to change. If, for some reason, my maximum glass size becomes 4.5 metres I have to look all through the program and change only the appropriate values. I do not like the idea of "magic numbers" in programs, what I would like to do is replace each number with something a bit more meaningful. We can do this by making a variable which is constant, i.e. it is never changed. const double PI=3.141592654; This means that you can do things like: circ = rad * 2 * PI ; This both more meaningful (we are using PI not some anonymous value) and makes the program quicker to write. Anywhere you use a magic number you should use a constant of this form, for example: const double MAX_WIDTH 5.0 ; This makes your programs much easier to read, and also much easier to change. There is a convention that you always give constant variables names which are expressed in CAPITAL LETTERS. This is so that when you read your program you can tell which things have been defined. We can therefore modify our double glazing program as follows: using System; class GlazerCalc { static void Main() { double width, height, woodLength, glassArea; const double MAX_WIDTH = 5.0 ; const double MIN_WIDTH = 0.5 ; const double MAX_HEIGHT = 3.0 ; const double MIN_HEIGHT = 0.75 ; string widthString, heightString; Console.Write ( "Give the width of the window : " ); widthString = Console.ReadLine(); width = double.Parse(widthString); if (width < MIN_WIDTH) { Console.WriteLine ( "Width is too small" ) ; Console.WriteLine ( "Using minimum" ) ; width = MIN_WIDTH ; } if (width > MAX_WIDTH) { Console.WriteLine ( "Width is too large.\n\n" ) ;
Writing a Program Loops
C# Programming © Rob Miles 2009 50
Console.WriteLine ( "Using maximum" ) ; width = MAX_WIDTH ; } Console.Write ( "Give the height of the window : " ); heightString = Console.ReadLine(); height = double.Parse(heightString); if (height < MIN_HEIGHT) { Console.WriteLine( "Height is too small.\n\n" ) ; Console.WriteLine ( "Using minimum" ) ; height = MIN_HEIGHT ; } if (height > MAX_HEIGHT) { Console.WriteLine( "Height is too large.\n\n" ) ; Console.WriteLine ( "Using maximum" ) ; height = MAX_HEIGHT ; } woodLength = 2 * ( width + height ) * 3.25 ; glassArea = 2 * ( width * height ) ; Console.WriteLine ( "The length of the wood is " + woodLength + " feet" ) ; Console.WriteLine("The area of the class is " + glassArea + " square metres" ) ; } } This program fulfils our requirements. It will not use values incompatible with our specification. However I would still not call it perfect. If our salesman gives a bad height the program simply limits the value and needs to be re-run, with the height having to be entered again. What we would really like is a way that we can repeatedly fetch values for the width and height until we get one which fits. C# allows us to do this by providing looping constructions. Loops Conditional statements allow you to do something if a given condition is true. However often you want to repeat something while a particular condition is true, or a given number of times. C# has three ways of doing this, depending on precisely what you are trying to do. Note that we get three methods not because we need three but because they make life easier when you write the program (a bit like an attachment to our chainsaw to allow it to perform a particular task more easily). Most of the skill of programming involves picking the right tool or attachment to do the job in hand. (the rest is finding out why the tool didn't do what you expected it to!). In the case of our program we want to repeatedly get numbers in until while we are getting duff ones, i.e. giving a proper number should cause our loop to stop. This means that if we get the number correctly first time the loop will execute just once. You might think that I have pulled a fast one here; all I have done is change: Get values until you see one which is OK into Get values while they are not OK Part of the art of programming is changing the way that you think about the problem to suit the way that the programming language can be told to solve it.
Writing a Program Loops
C# Programming © Rob Miles 2009 51 do -- while loop In the case of our little C# program we use the do -- while construction which looks like this: do statement or block while (condition) ; This allows us to repeat a chunk of code until the condition at the end becomes false. Note that the test is performed after the statement or block, i.e. even if the test is bound to fail the statement is performed once. A condition in this context is exactly the same as the condition in an if statement, raising the intriguing possibility of programs like: using System; class Forever { public static void Main () { do Console.WriteLine ( "Hello mum" ) ; while ( true ); } } This is a perfectly legal C# program. How long it will run for is an interesting question, the answer contains elements of human psychology, energy futures and cosmology, i.e. it will run until: 1. You get bored with it. 2. Your electricity runs out. 3. The universe implodes. This is a chainsaw situation, not a powerful chainsaw situation. Just as it is possible with any old chainsaw to cut off your leg if you try really hard so it is possible to use any programming language to write a program which will never stop. It reminds me of my favourite shampoo instructions: 1. Wet Your Hair 2. Add Shampoo and Rub vigorously. 3. Rinse with warm water. 4. Repeat. I wonder how many people there are out there still washing their hair at the moment? while loop Sometimes you want to decide whether or not to repeat the loop before you perform it. If you think about how the loop above works the test is done after the code to be repeated has been performed once. For our program this is exactly what we want, we need to ask for a value before we can decide whether or not it is valid. In order to be as flexible as possible C# gives us another form of the loop construction which allows us to do the test first: while (condition) statement or block Note that C makes an attempt to reduce the number of keys you need to press to run the program by leaving out the word do. (if you put the do in the compiler will take great delight in giving you an error message - but you had already guessed that of course!).
Writing a Program Loops
C# Programming © Rob Miles 2009 52 for loop Often you will want to repeat something a given number of times. The loop constructions we have given can be used to do this quite easily: using System; class WhileLoopInsteadOfFor { public static void Main () { int i ; i = 1 ; while ( i < 11 ) { Console.WriteLine ( "Hello mum" ) ; i = i + 1 ; } } } The variable which controls things is often called the control variable, and is usually given the name i. This useless program prints out hello 10 times. It does this by using a variable to control the loop. The variable is given an initial value (1) and then tested each time we go around the loop. The control variable is then increased for each pass through the statements. Eventually it will reach 11, at which point the loop terminates and our program stops. C# provides a construction to allow you to set up a loop of this form all in one: for ( setup ; finish test ; update ) { things we want to do a given number of times } We could use this to re-write the above program as: using System; class ForLoop { public static void Main () { int i ; for ( i = 1 ; i < 11 ; i = i + 1 ) { Console.WriteLine ( "Hello mum" ) ; } } } The setup puts a value into the control variable which it will start with. The test is a condition which must be true for the for -- loop to continue. The update is the statement which is performed to update the control variable at the end of each loop. Note that the three elements are separated by semicolons. The precise sequence of events is as follows: 1. Put the setup value into the control variable. 2. Test to see if we have finished the loop yet and exit to the statement after the for loop if we have. 3. Perform the statements to be repeated. 4. Perform the update. 5. Repeat from step 2. Writing a loop in this way is quicker and simpler than using a form of while because it keeps all the elements of the loop in one place instead of leaving them spread about the program. This means that you are less likely forget to do something like give the control variable an initial value, or update it. If you are so stupid as to mess around with the value of the control variable in the loop you can expect your program to do stupid things, i.e. if you put i back to 0 within the loop it will run forever. And serve you right.
Writing a Program Loops
C# Programming © Rob Miles 2009 53
Programmer’s Point:Don't be clever/stupid Some people like to show how clever they are by doing cunning things with the setup, condition and update statements, which can do things other than simple assignment, increment and test. Some programmers think they are very clever if they can do all the work "inside" the for loop and have an empty statement after it. I call these people "the stupid people". There is rarely need for such convoluted code. When you are writing programs the two things which you should be worrying about are "how do I prove this works?" and "how easy is it to understand?" Complicated code does not help you do either of these things. Breaking Out of Loops Sometimes you may want to escape from a loop whilst you are in the middle of it, i.e. your program may decide that there is no need or point to go on and wishes to leap out of the loop and continue the program from the statement after it. You can do this with the break statement. This is a command to leave the loop immediately. Your program would usually make some form of decision to quit in this way. I find it most useful so that I can provide a "get the heck out of here" option in the middle of something, for example in the following program snippet the variable aborted, normally false becomes true when the loop has to be abandoned and the variable runningOK, normally true, becomes false when it is time to finish normally. while (runningOK) { complex stuff .... if (aborted) { break ; } .... more complex stuff .... } .... bit we get to if aborted becomes true .... Note that we are using two variables as switches, they do not hold values as such; they are actually used to represent states within the program as it runs. This is a standard programming trick that you will find very useful. You can break out of any of the three kinds of loop. In every case the program continues running at the statement after the last statement of the loop. Programmer’s Point:Be careful with your breaks The break keyword smells a little like the dread goto, which programmers are often scared of. The goto lets you jump from one part of the program to another. For this reason the goto is condemned as a potentially dangerous and confusing device. The break statement lets you jump from any point in a loop to the statement just outside the loop. This means that if my program is at the statement immediately following the loop, there are a number of ways it could have got there; one for every break in the loop above. This can make the code harder to understand. The break construction is less confusing than the goto, but can still lead to problems. In this respect we advise you to exercise caution when using it.
Writing a Program Loops
C# Programming © Rob Miles 2009 54
Going back to the top of a loop Every now and then you will want to go back to the top of a loop and do it all again. This happens when you have gone as far down the statements as you need to. C provides the continue statement which says something along the lines of: Please do not go any further down this time round the loop. Go back to the top of the loop, do all the updating and stuff and go around if you are supposed to. In the following program the bool variable Done_All_We_Need_This_Time is set true when we have gone as far down the loop as we need to. for ( item = 1 ; item < Total_Items ; item=item+1 ) { ..... item processing stuff .... if (Done_All_We_Need_This_Time) { continue ; .... additional item processing stuff .... } The continue causes the program to re-run the loop with the next value of item if it is OK to do so. You can regard it as a move to step 2 in the list above. More Complicated Decisions We can now think about using a loop to test for a valid width or height. Essentially we want to keep asking the user for a value until we get one which is OK; i.e. if you get a value which is larger than the maximum or smaller than the minimum ask for another. To do this we have to combine two tests to see if the value is OK. Our loop should continue to run if: width > MAX_WIDTH or width < MIN_WIDTH To perform this test we use one of the logical operators described above to write a condition which will be true if the width is invalid: ( (width < MIN_WIDTH) || (width > MAX_WIDTH) ) - note the profuse use of brackets. You must put these in. Programmer’s Point:Get used to flipping conditions One of the things that you will have to come to terms with is the way that you often have to reverse the way you look at things. Rather than saying "Read me a valid number" you will have to say "Read numbers while they are not valid". This means that you will often be checking to find the thing that you don't want, rather than the thing that you do. Remember the notes about reversing conditions above when you write the code. Complete Glazing Program This is a complete solution to the glazing problem. It uses all the tricks mentioned above.
Writing a Program Operator Shorthand
C# Programming © Rob Miles 2009 55
Operator Shorthand So far we have looked at operators which appear in expressions and work on two operands, e.g. window_count = window_count + 1 In this case the operator is + and is operating on the variable window_count and the value 1. The purpose of the above statement is to add 1 to the variable window_count. However, it is a rather long winded way of expressing this, both in terms of what we have to type and what the computer will actually do when it runs the program. C# allows us to be more terse if we wish, the line: // Complete Double Glazing Program // Rob Miles Oct. 2004 using System; class GlazerCalc { static void Main() { double width, height, woodLength, glassArea; const double MAX_WIDTH = 5.0 ; const double MIN_WIDTH = 0.5 ; const double MAX_HEIGHT = 3.0 ; const double MIN_HEIGHT = 0.75 ; string widthString, heightString; do { Console.Write ( "Give the width of the window between " + MIN_WIDTH + " and " + MAX_WIDTH + " :" ); widthString = Console.ReadLine(); width = double.Parse(widthString); } while ( (width < MIN_WIDTH) || (width > MAX_WIDTH) ) ; do { Console.Write ( "Give the height of the window between " + MIN_HEIGHT + " and " + MAX_HEIGHT + " :" ); heightString = Console.ReadLine(); height = double.Parse(heightString); } while ( (height < MIN_HEIGHT) || (height > MAX_HEIGHT) ); woodLength = 2 * ( width + height ) * 3.25 ; glassArea = 2 * ( width * height ) ; Console.WriteLine ( "The length of the wood is " + woodLength + " feet" ) ; Console.WriteLine("The area of the class is " + glassArea + " square metres" ) ; } }
Writing a Program Operator Shorthand
C# Programming © Rob Miles 2009 56 window_count++ - would do the same thing. We can express ourselves more succinctly and the compiler can generate more efficient code because it now knows that what we are doing is adding one to a particular variable. The ++ is called a unary operator, because it works on just one operand. It causes the value in that operand to be increased by one. There is a corresponding -- operator which can be used to decrease (decrement) variables. You can see examples of this construction in the for loop definition in the example above. The other shorthand which we use is when we add a particular value to a variable. We could put : house_cost = house_cost + window_cost This is perfectly OK, but again is rather long winded. C# has some additional operators which allow us to shorten this to: house_cost += window_cost The += operator combines addition and the assignment, so that the value in house_cost is increased by window_cost. Some other shorthand operators are: a += b the value in a is replaced a + b. a -= b the value in a is replaced by a - b. a /= b the value in a is replaced by a / b. a *= b the value in a is replaced by a * b. There are other combination operators; I will leave you to find them! Statements and Values One of the really funky things about C# is that all statements return a value, which you can use in another statement if you like. Most of the time you will ignore this value, which is OK, but sometimes it can be very useful, particularly when we get around to deciding things (see later). In order to show how this is done, consider the following: i = (j=0); This is perfectly legal (and perhaps even sensible) C#. It has the effect of setting both i and j to 0. An assignment statement always returns the value which is being assigned (i.e. the bit on the right of the gozzinta). This value can then be used as a value or operand. If you do this you are advised to put brackets around the statement which is being used as a value, this makes the whole thing much clearer for both you and the compiler! When you consider operators like ++ there is possible ambiguity, in that you do not know if you get the value before or after the increment. C# provides a way of getting either value, depending on which effect you want. You determine whether you want to see the value before or after the sum by the position of the ++ : i++ Means give me the value before the increment. ++i means give me the value after the increment. As an example: int i = 2, j ; j = ++i ; - would make j equal to 3. The other special operators, += etc all return the value after the operator has been performed.
Writing a Program Neater Printing
C# Programming © Rob Miles 2009 57
Programmer’s Point:Always strive for simplicity Don't get carried away with this. The fact that you can produce code like: height = width = speed = count = size = 0 ; - does not mean that you should. Nowadays when I am writing a program my first consideration is whether or not the program is easy to understand. I don't think that the statement above is very easy to follow – so irrespective of how much more efficient it is, I still don't do it. Neater Printing Note that the way that a number is printed does not affect how it is stored in the program, it just tells the printing method how it is supposed to be printed. If you have run any of the above programs you will by now have discovered that the way in which numbers are printed leaves much to be desired. Integers seem to come out OK, but floating point numbers seem to have a mind of their own. To get around this C# provides a slightly different way in which numbers can be printed. This provides more flexibility, and is also somewhat easier to use if you are printing a large number of values. Using Placeholders in Print Strings A placeholder just marks the place where the value is to be printed. Consider: int i = 150 ; double f = 1234.56789 ; Console.WriteLine ( "i: {0} f: {1}", i, f ) ; Console.WriteLine ( "i: {1} f: {0}", f, i ) ; This would print out: i: 150 f: 1234.56789 i: 150 f: 1234.56789 The {n} part of the string says "parameter number n, counting from 0". In the second write statement I have swapped the order of the numbers, but since I've swapped the order of the parameters too the output is the same. Of course if I do something mad, for example {99}, the WriteLine method will fail with an error. Adjusting real number precision Placeholders can have formatting information added to them: int i = 150 ; double f = 1234.56789 ; Console.WriteLine ( "i: {0:0} f: {1:0.00}", i, f ) ; This would print out: i: 150 f: 1234.57 The 0 characters stand for one or more digits. When placed after a decimal point they can be used to control the number of decimal places which are used to express a value. Note that doing this means that if the number is an integer it is printed out as 12.00. Specifying the number of printed digits I can specify a particular number of digits by putting in a given number of zeroes:
Writing a Program Neater Printing
C# Programming © Rob Miles 2009 58 int i = 150 ; double f = 1234.56789 ; Console.WriteLine ( "i: {0:0000} f: {1:00000.00}", i, f ); This would print out: i: 0150 f: 01234.57 Note that if I do this I get leading zeroes printed out, which is useful if you are printing things like cheques. Really Fancy Formatting If you want really fancy levels of control you can use the # character. A # in the format string means "put a digit here if you have one": int i = 150 ; double f = 1234.56789 ; Console.WriteLine ( "i: {0:#,##0} f: {1:##,##0.00}",i, f ); I have used the # character to get my thousands printed out with commas: i: 150 f: 1,234.57 Note that the formatter only uses the # characters and commas that it needs. The value 150 does not have a thousands digit so it and the comma are left out. Note also though that I have included a 0 as the smallest digit. This is so that when I print the value 0 I actually get a value printed, otherwise when I print zero I get absolutely nothing on the page. Printing in columns Finally I can add a width value to the print layout information. This is very useful if you want to print material in columns: int i = 150 ; double f = 1234.56789 ; Console.WriteLine ( "i: {0,10:0} f: {1,15:0.00}", i, f ) ; Console.WriteLine ( "i: {0,10:0} f: {1,15:0.00}", 0, 0 ) ; This would produce the output: i: 150 f: 1234.57 i: 0 f: 0.00 The integer value is printed in a column 10 characters wide, and the double is printed in a 15 character wide column. At the moment the output is right justified, if I want the numbers left justified I make the width negative: int i = 150 ; double f = 1234.56789 ; Console.WriteLine ( "i: {0,-10:0} f: {1,-15:0.00}",i, f ) ; Console.WriteLine ( "i: {0,-10:0} f: {1,-15:0.00}",0, 0 ) ; This would produce the output: i: 150 f: 1234.57 i: 0 f: 0.00 Note that this justification would work even if you were printing a string rather than a number, so if you want to print columns of words you can use this technique to do it. There are other ways in which you can control the printing process, for example you can select the number base for the value to be printed. I will leave you to find out these! Note also that you can specify the print width of any item, even a piece of text, which makes printing in columns very easy.
Methods Methods So Far
C# Programming © Rob Miles 2009 59
Methods We have already come across the methods Main, WriteLine and ReadLine. Main is the method we write which is where our program starts. WriteLine and ReadLine were provided by the creators of C# to give us a way of displaying text and reading information from the user. This is what methods are all about. Your programs will contain methods that you create to solve parts of the problem and they will also use methods that have been provided by other people. In this section we are going to consider why methods are useful and how you can create your own. Methods So Far In the glazing program above we spend a lot of time checking the values of inputs and making sure that they are in certain ranges. We have exactly the same piece of code to check widths and heights. If we added a third thing to read, for example frame thickness, we would have to copy the code a third time. This is not very efficient; it makes the program bigger and harder to write. What we would like to do is write the checking code once and then use it at each point in the program. To do this you need to define a method to do the work for you. Method and Laziness We have already established that a good programmer is creatively lazy. One of the tenets of this is that a programmer will try to do a given job once and once only. Up until now all our programs have been in a single method. The method is the block of code which follows the main part in our program. However, C# lets us create other methods which are used when our program runs. Methods give us two new weapons: 1. We can use methods to let us re-use a piece of code which we have written. 2. We can also use methods to break down a large task into a number of smaller ones. We will need both of these when we start to write larger programs. Again, as with lots of features of the C# language, methods don't actually make things possible, but they do help with the organisation of our programs. Essentially you take a block of code and give it a name. Then you can refer to this block of code to do something for you. As a silly example: using System ; class MethodDemo { static void doit () { Console.WriteLine ("Hello"); } public static void Main () { doit(); doit(); } } In the main method I make two calls of doit. Each time I call the method the code in the block which is the body of the method is executed. In this case it contains a single statement which prints "Hello" on the console. The result of running the above program would be:
Methods Methods So Far
C# Programming © Rob Miles 2009 60
Hello Hello So, we can use methods to save us from writing the same code twice. We simply put the code inside a method body and then call it when we need it. Parameters At this point methods are useful because they let us use the same block of statements at many points in the program. However, they become more useful if we allow them to have parameters. A parameter is a means of passing a value into a method call. The method is given the data to work on. As an example, consider the code below: using System ; class MethodDemo { static void silly ( int i) { Console.WriteLine ( "i is : " + i ) ; } public static void Main () { silly ( 101 ) ; silly ( 500 ) ; } } The method silly has a single integer parameter. Within the block of code which is the body of this method we can use the parameter i as if it was an integer variable. When the method starts the value supplied for the parameter is copied into it. This means that when the program runs we get output like this: i is : 101 i is : 500 Return values A method can also return a value: using System ; class ReturnDemo { static int sillyReturnPlus ( int i) { i = i + 1; Console.WriteLine ( "i is : " + i ) ; return i; } public static void Main () { int res; res = sillyReturnPlus (5); Console.WriteLine ( "res is : " + res ) ; } } The method sillyReturnPlus takes the value of the parameter and returns it plus one. A Useful Method If we put these two abilities together we can start to write genuinely useful methods:
Methods Methods So Far
C# Programming © Rob Miles 2009 61 class MethodDemo { static double readValue ( string prompt, // prompt for the user double low, // lowest allowed value double high // highest allowed value ) { double result = 0; do { Console.WriteLine (prompt + "between " + low + " and " + high ); string resultString = Console.ReadLine (); result = double.Parse(resultString); } while ( (result < low) || (result > high) ); return result ; } public static void Main () { double age = readValue ( "Enter the age : ", 0, 100.0 ) ; Console.WriteLine ( "Age is : " + age ) ; } } The readValue method is told the prompt to use and the lowest and the highest allowed values. It can then be used to read values and make sure that they are in range. We can use this method to read the ages of people as in the example above. However, we can also use exactly the same method to read in the width and height of our windows: double windowWidth = readValue ( "Enter width of window: ", MIN_WIDTH, MAX_WIDTH) ; Programmer’s Point:Design with methods Methods are a very useful part of the programmer's toolkit. They form an important part of the development process. Once you have worked out what the customer wants and gathered your metadata you can start thinking about how you are going to break the program down into methods. Often you find that as you write the code you are repeating a particular action. If you do this you should consider taking that action and moving it into a method. There are two reasons why this is a good idea: 1. It saves you writing the same code twice. 2. If a fault is found in the code you only have to fix it in one place. Moving code around and creating methods is called refactoring. This will be an important part of the Software Engineering we do later. Method Limitations The method is very good for getting work done, but it is a bit limited because of the way that it works. For example, if I want to write a method which reads in the name and age of a person I have a problem. From what we have seen of methods, they can only return one value. So I could write a method which returns the name of a person, or write on which returns an age. But not both values at the same time. This limitation is because, unless you specify otherwise, only the value of a parameter is passed into a call to a method.
Methods Methods So Far
C# Programming © Rob Miles 2009 62
Parameter Passing By Value So, what do I mean by "passing parameters by value". Consider: static void addOneToParam ( int i) { i = i + 1; Console.WriteLine ( "i is : " + i ) ; } The method addOneToParam adds one to the parameter, prints the result out and then returns: int test = 20 ; addOneToParam(test); Console.WriteLine ( "test is : " + test ) ; The piece of C# above calls the method with the variable test as the parameter. When it runs it prints out the following: i is : 21 test is : 20 It is very important that you understand what is happening here. The value of test is being used in the call of addOneToParam. The program works out the result of the expression to be passed into the method call as a parameter. It then passes this value into the call. This means that you can write calls like: test = 20 ; addOneToParam(test + 99); This would print out: i is : 120 Pass by value is very safe, because nothing the method does will affect variables in the code which calls it. However, it is a limitation when we want to create a method which returns more than one value. Parameter Passing By Reference It is very important that you understand how references work. If you don't understand these you can't call yourself a proper programmer! Fortunately C# provides a way that, rather than sending the value of a variable into a method, instead a reference to that variable is supplied instead. Inside the method, rather than using the value of the variable the reference is used to get the actual variable itself. Effectively the thing that is passed into the method is the position or address of the variable in memory, rather than the content of the variable. So, rather than passing in "20" in our above call the compiler will generate code which passes in "memory location 5023" instead (assuming that the variable test is actually stored at 5023). This memory location is used by the method, instead of the value. In other words: "If you pass by reference, changes to the parameter change the variable whose reference you passed" Consider the code: static void addOneToRefParam ( ref int i) { i = i + 1; Console.WriteLine ( "i is : " + i ) ; } Note that the keyword ref has been added to the information about the parameter.
Methods Methods So Far
C# Programming © Rob Miles 2009 63 test = 20 ; addOneToRefParam(ref test); Console.WriteLine ( "test is : " + test ) ; The code above makes a call to the new method, and also has the word ref in front of the parameter. In this case the output is as follows: i is : 21 test is : 21 In this case the method call has made changes to the content of the variable. Note that C# is careful about when a parameter is a reference. You have to put the word ref in the method heading and also in the call of the method. Programmer’s Point:Document your side-effects A change by a method to something around it is called a side effect of the method. Generally speaking you have to be careful with these, as someone reading your program has to know that your method has made changes in this way. Passing Parameters as "out" references When you pass a parameter as a reference you are giving the method complete control of it. Sometimes you don't want this. Instead you want to just allow the method to change the variable. This is the case when we want to read in the name and age of a user. The original value of the parameters is of no interest to the method. Instead it just wants to deliver results to them. In this case I can replace the ref with the keyword out: static void readPerson ( out string name, out int age ) { name = readString ( "Enter your name : " ) ; age = readInt ( "Enter your age : ", 0, 100 ) ; } The method readPerson reads the name and the age of a person. Note that it uses two more methods that I have created, readString and readInt. I can call readPerson as follows: string name ; int age ; readPerson ( out name, out age ) ; Note that I must use the out keyword in the call of the method as well. The readPerson method will read the person and deliver the information into the two variables. Programmer’s Point:Languages can help programmers The out keyword is a nice example of how the design of a programming language can make programs safer and easier to write. It makes sure that a programmer can't use the value of the parameter in the method. It also allows the compiler to make sure that somewhere in the method the output parameters are assigned values. This is very useful. It means that if I mark the parameters as out I must have given them a value for the program to compile. This makes it harder for me to get the program wrong, as I am protected against forgetting to do that part of the job.
Methods Variables and Scope
C# Programming © Rob Miles 2009 64
Method Libraries The first thing that a good programmer will do when they start writing code is to create a set of libraries which can be used to make their job easier. In the code above I have written a couple of library methods which I can use to read values of different types: static string readString ( string prompt ) { string result ; do { Console.Write ( prompt ) ; result = Console.ReadLine (); } while ( result == "" ) ; return result ; } static int readInt ( string prompt, int low, int high ) { int result ; do { string intString = readString (prompt) ; result = int.Parse(intString); } while ( ( result < low ) || ( result > high ) ); return result; } The readString method will read text and make sure that the user does not enter empty text. The readInt method reads a number within a particular range. Note how I have rather cleverly used my readString method in my readInt one, so that the user can't enter an empty string when a number is required. Programmer’s Point:Always consider the failure behaviours Whenever you write a method you should give some thought to the ways that it could fail. If the method involves talking to the user it is possible that the user may wish to abandon the method, or that the user does something that may cause it to fail. You need to consider whether or not the method should deal with the problem itself or pass the error onto the system which tried to use it. If the method deals with the error itself this may lead to problems because the user may have no way of canceling a command. If the method passes the error on to the code which called it you have to have a method by which an error condition can be delivered to the caller. I often solve this problem by having my methods return a code value. If the return value is 0 this means that the method returned correctly. If the return value is non-zero this means that the method did not work and the value being returned is an error which identifies what went wrong. This adds another dimension to program design, in that you also have to consider how the code that you write can fail, as well as making sure that it does the required job! We are going to discuss error management later Variables and Scope We have seen that when we want to store a quantity in our program we can create a variable to hold this information. The C# compiler makes sure that the correctly sized chunk of memory is used to hold the value and it also makes sure that we only ever use that value correctly. The C# compiler also looks after the part of a program within which a variable has an existence. This is called the scope of a variable.
Methods Variables and Scope
C# Programming © Rob Miles 2009 65
Scope and blocks We have already seen that a block is a number of statements which are enclosed in curly brackets. Any block can contain any number of local variables, i.e. variables which are local to that block. The scope of a local variable is the block within which the variable is declared. As far as the C# language is concerned you can declare a variable at any point in the block, but you must declare it before you use it. When the execution of the program moves outside a block any local variables which are declared in the block are automatically discarded. The methods that we have created have often contained local variables; the variable result in the readInt method is local to the method block. Nested Blocks We have seen that in C# the programmer can create blocks inside blocks. Each of these nested blocks can have its own set of local variables: { int i ; { int j ; } } The variable j has the scope of the inner block. This means that only statements in the inner block which are after the declaration can use this variable. In other words the code: { int i ; { int j ; } j = 99 ; } - would cause an error, as the variable j does not exist at this point in the program. In order to keep you from confusing yourself by creating two versions of a variable with the same name C# has an additional rule about the variables in the inner blocks: { int i ; { int i ; } } This is not a valid program because C# does not let a variable in an inner block have the same name as one in an outer block. This is because inside the inner block there is the possibility that you may use the "inner" version of i when you intend to use the outer one. In order to remove this possibility the compiler refuses to allow this. Note that this is in contrast to the situation in other languages, for example C++, where this behaviour is allowed. If is however perfectly acceptable to reuse a variable name in successive blocks because in this situation there is no way that one variable can be confused with another.
Arrays Why We Need Arrays
C# Programming © Rob Miles 2009 66
{ int i ; } { int i ; { int j ; } } The first incarnation of i has been destroyed before the second, so this code is OK. For loop local variables A special kind of variable can be used when you create a for loop construction. This allows you to declare a control variable which exists for the duration of the loop itself: for ( int i = 0 ; i < 10 ; i = i + 1 ) { Console.WriteLine ( "Hello") ; } The variable i is declared and initialized at the start of the for loop and only exists for the duration of the block itself. Programmer’s Point:Plan your variable use You should plan your use of variables in your programs. You should decide which variables are only required for use in local blocks and which should be shared over the entire class. Arrays We now know how to create programs that can read values in, calculate results and print them. Our programs can also make decisions based on the values supplied by the user and also repeat actions a given number of times. It turns out that you now know about nearly all the language features that are required to implement every program that has ever been written. Only one thing is missing, and that is the ability to create programs which store large amounts of data. Arrays are one way to do this, and we are going to find out about them next. Why We Need Arrays Your fame as a programmer is now beginning to spread far and wide. The next person to come and see you is the chap in charge of the local cricket team. He would like to you write a program for him which allows the analysis of cricket results. What he wants is quite simple; given a list of cricket scores he wants a list of them in ascending order. "This is easy" you think. Having agreed the specification and the price you sit down that night and start writing the program. The first thing to do is define how the data is to be stored: int score1, score2, score3, score4, score5, score6, score7 score8, score9, score10, score11 ; Now you can start putting the data into each variable:
Arrays Why We Need Arrays
C# Programming © Rob Miles 2009 67
Console.WriteLine("Enter the scores "); string score1String = Console.ReadLine(); int score1 = int.Parse(score1String); string score2String = Console.ReadLine(); int score2 = int.Parse(score2String); string score3String = Console.ReadLine(); int score3 = int.Parse(score3String); string score4String = Console.ReadLine(); int score4 = int.Parse(score4String); string score5String = Console.ReadLine(); int score5 = int.Parse(score5String); string score6String = Console.ReadLine(); int score6 = int.Parse(score6String); string score7String = Console.ReadLine(); int score7 = int.Parse(score7String); string score8String = Console.ReadLine(); int score8 = int.Parse(score8String); string score9String = Console.ReadLine(); int score9 = int.Parse(score9String); string score10String = Console.ReadLine(); int score10 = int.Parse(score10String); string score11String = Console.ReadLine(); int score11 = int.Parse(score11String); All we have to do next is sort them..... Hmmmm..... This is awful! There seems to be no way of doing it. Just deciding whether score1 is the largest value would take an if construction with 10 comparisons! Clearly there has to be a better way of doing this, after all, we know that computers are very good at sorting this kind of thing. C# provides us with a thing called an array. An array allows us to declare a whole row of a particular kind of box. We can then use things called subscripts to indicate which box in the row that we want to use. Consider the following: using System; class ArrayDemo { public static void Main () { int [] scores = new int [11] ; for ( int i=0; i= 10000 ) && ( age >= 18 ) ) { return true; } else { return false; } } Now the method is part of the class, not an instance of the class. I can now call the method by using the class name:
Static Items Static class members
C# Programming © Rob Miles 2009 93 if ( Account.Allowed ( 25000, 21 ) ) { Console.WriteLine ( "Allowed Account"); } This is nice because I have not had to make an instance of the account to find out if one is allowed.. Using member data in static methods The Allowed method is OK, but of course I have hard wired the age and income methods into it. I might decide to make the method more flexible: public class Account { private decimal minIncome = 10000; private int minAge = 18; public static bool Allowed(decimal income, int age) { if ( ( income >= minIncome) && ( age >= minAge) ) { return true; } else { return false; } } } This is a better design, in that I now have members of the class which set out the upper limits of the age and income. However it is a bad program, since the class above will not compile: AccountManagement.cs(19,21): error CS0120: An object reference is required for the nonstatic field, method, or property 'Account.minIncome' AccountManagement.cs(19,43): error CS0120: An object reference is required for the nonstatic field, method, or property 'Account.minAge' As usual, the compiler is telling us exactly what is wrong; using language which makes our heads spin. What the compiler really means is that "a static method is using a member of the class which is not static". If that doesn’t help, how about this: The members minIncome and minAge are held within instances of the Account class. However, a static method can run without an instance (since it is part of the class). The compiler is unhappy because in this situation the method would not have any members to play with. We can fix this (and get our program completely correct) by making the income and age limits static as well:
The Construction of Objects Static class members
C# Programming © Rob Miles 2009 94 public class Account { private static decimal minIncome ; private static int minAge ; public static bool Allowed(decimal income, int age) { if ( ( income > minIncome) && ( age > minAge) ) { return true; } else { return false; } } } If you think about it, this makes perfect sense. The limit values should not be held as members of a class, since we want them to be the same for all instances of the class, therefore, making them static is what we should have done in the first place. Programmer’s Point:Static Method Members can be used to make Libraries Sometimes in a development you need to provide a library of methods to do stuff. In the C# system itself there are a huge number of methods to perform maths functions, for example sin and cos. It makes sense to make these methods static, in that in this situation all we want is the method itself, not an instance of a class. Again, when you are building your system you should think about how you are going to make such methods available for your own use. Bank Notes: Static Bank Information The kind of problems that we can use static to solve in our bank are: static member variable: the manager would like us to be able to set the interest rate for all the customer accounts at once. A single static member of the Account class will provide a variable which can be used inside all instances of the class. But because there is only a single copy of this value this can be changed and thereby adjust the interest rate for all the accounts. Any value which is held once for all classes (limits on values are another example of this) is best managed as a static value. The time it becomes impossible to use static is when the manager says "Oh, accounts for five year olds have a different interest rate from normal ones". At this point we know we can’t use static because we need to hold different values for some of the instances. static member method: the manager tells us that we need a method to determine whether or not a given person is allowed to have an account. I can't make this part of any Account instance because at the time it runs an account has not been generated. I must make it static, so that it can execute without an instance. The Construction of Objects We have seen that our objects are created when we use new to bring one into being: test = new Account(); If you look closely at what is happening you might decide that what is happening looks quite a bit like a method call.
The Construction of Objects The Default Constructor
C# Programming © Rob Miles 2009 95
This is actually exactly what is happening. When an instance of a class is created the C# system makes a call to a constructor method in that class. The constructor method is a member of the class and it is there to let the programmer get control and set up the contents of the shiny new object. One of the rules of the C# game is that every single class must have a constructor method to be called when a new instance is created. “But wait a minute”, you say, “We’ve been making objects for a while and I’ve never had to provide a constructor method”. This is because the C# compiler is, for a change, being friendly here. Rather than shout at you for not providing a constructor method, the compiler instead quietly creates a default one for you and uses that. You might think this is strange, in that normally the compiler loses no time in telling you off when you don’t do something, but in this case it is simply solving the problem without telling you. There are two ways to look at this:  nice compiler: the compiler is trying to make life easier for you  evil compiler: the compiler knows that if it does this automatically now you will suffer more later when you try to understand why you don’t need to add one How you regard the action of the compiler is up to you. The Default Constructor A constructor method has the same name as the class, but it does not return anything. It is called when we perform new. If you don’t supply a constructor (and we haven’t so far) the compiler creates one for us. public class Account { public Account () { } } This is what the default constructor looks like. It is public so that it can be accessed from external classes who might want to make instances of the class. It accepts no parameters. If I create my own constructor the compiler assumes that I know what I’m doing and stops providing the default one. This can cause problems, which we will discuss later. Our Own Constructor For fun, we could make a constructor which just prints out that it has been called: public class Account { public Account () { Console.WriteLine ( "We just made an account" ); } } This constructor is not very constructive (ho ho) but it does let us know when it has been called. This means that when my program executes the line: robsAccount = new Account(); - the program will print out the message: We just made an account Note that this is not very sensible, in that it will result in a lot of printing out which the user of the program might not appreciate, but it does show how the process works.
The Construction of Objects Overloading Constructors
C# Programming © Rob Miles 2009 96
Feeding the Constructor Information It is useful to be able to get control when an Account is created, but it would be even nicer to be able to feed information into the Account when I create it. As an example, I might want to set the name, address, and initial balance of an account holder when the account is created. In other words I want to do: robsAccount = new Account("Rob Miles", "Hull", 0); This could create a new account and set the name property to Rob Miles, the address to Hull and the initial balance to zero. It turns out that I can do this very easily, all I have to do is make the constructor method to accept these parameters and use them to set up the members of the class: class Account { // private member data private string name; private string address; private decimal balance; // constructor public Account (string inName, string inAddress, decimal inBalance) { name = inName; address = inAddress; balance = inBalance; } } The constructor takes the values supplied in the parameters and uses them to set up the members of the Account instance that is being created. In this respect it behaves exactly as any other method call. Note that adding a constructor like this has one very powerful ramification: You must use the new constructor to make an instance of a class, i.e. the only way I can now make an Account object is by supplying a name, address and starting balance. If I try to do this: robsAccount = new Account(); - the compiler will stop being nice to me and produce the error: AccountTest.cs(9,27): error CS1501: No overload for method 'Account' takes '0' arguments What the compiler is telling me is that there is no constructor in the class which does not have any parameters. In other words, the compiler only provides a default constructor if the programmer doesn't provide a constructor. This can cause confusion if we have made use of the default constructor in our program and we then add one of our own. The default constructor is no longer supplied by the compiler and our program now fails to compile correctly. In that situation you have to either find all the calls to the default one and update them, or create a default constructor of your own for these calls to use. Of course you don't have to do this because your design of the program was so good that you never have this problem. Just like me, hem hem. Overloading Constructors Overload is an interesting word. In the context of the "Star Trek" science fiction series it is what they did to the warp engines in every other episode. In the context of a C# program it means: "A method has the same name as another, but has a different set of parameters"
The Construction of Objects Constructor Management
C# Programming © Rob Miles 2009 97
The compiler is quite happy for you to overload methods, because it can tell from the parameters given at the call of the method which one to use. In the context of the constructor of a class, what this means is that you can provide several different ways of constructing an instance of a class. For example, many (but not all) of your accounts will be created with a balance value of zero, i.e. nothing in the account. This means that we would like to be able to write robsAccount = new Account("Rob Miles","Hull"); I've missed off the balance value, since I want to use the "default" one of zero. If your code does this the compiler simply looks for a constructor method which has two strings as parameters, and nothing else. Something a bit like this: public Account (string inName, string inAddress){ name = inName; address = inAddress; balance = 0; } Overloading a method name In fact, you can overload any method name in your classes. This can be useful if you have a particular action which can be driven by a number of different items of data, for example you could provide several ways of setting the date of a transation: SetDate ( int year, int month, int day) SetDate ( int year, int julianDate ) SetDate ( string dateInMMDDYY) A call of: SetDate (23, 7, 2005 ); - would be matched up with the method which accepts three integer parameters and that code would be executed. Constructor Management If the Account class is going to have lots of constructor methods this can get very confusing for the programmer: public Account (string inName, string inAddress, decimal inBalance) { name = inName; address = inAddress; balance = inBalance; } public Account (string inName, string inAddress){ name = inName; address = inAddress; balance = 0; } public Account (string inName) { name = inName; address = "Not Supplied"; balance = 0; } I've made three constructors for an Account instance. The first is supplied with all the information, the second is not given a balance and sets the value to 0. The third is not given the address either, and sets the address to "Not Supplied".
The Construction of Objects A constructor cannot fail
C# Programming © Rob Miles 2009 98
To do this I have had to duplicate code. Good programmers hate duplicating code. It is regarded as "dangerous extra work". The scary thing is that it is quite easy to do, just use the block copy command in the text editor and you can take the same piece of program and use it all over the place. But you should not do this. Because it is bad. If you need to change this piece of code you have to find every copy of the code and change it. This happens more often than you'd think, even if you don't put a bug in your code, you still might find yourself having to change it because the specification changes. So, C# provides a way in which you can call one constructor from another. Consider: public Account (string inName, string inAddress, decimal inBalance) { name = inName; address = inAddress; balance = inBalance; } public Account ( string inName, string inAddress ) : this (inName, inAddress, 0 ) { } public Account ( string inName ) : this (inName, "Not Supplied", 0 ) { } The keyword this means "another constructor in this class". As you can see in the code sample above, the highlighted bits of the code are calls to the first constructor. They simply pass the parameters which are supplied, along with any default values that we have created, on to the "proper" constructor to deal with. This means that the actual transfer of the values from the constructor into the object itself only happens in one method, and the other constructor methods just make calls to it. The syntax of these calls is rather interesting, in that the call to the constructor takes place before the body of the constructor method. In fact it is outside the block completely. This is sensible, because it reflects exactly what is happening. The "this" constructor runs before the body of the other constructor is entered. In fact, in the code above, since the call of this does all the work, the body of the constructor can be empty. Programmer’s Point:Object Construction Should Be Planned The way in which objects are constructed is something that you should plan carefully when you write your program. You should create one "master" constructor which handles the most comprehensive method of constructing the object. Then you should make all the other constructor methods use this to get hold of that method. A constructor cannot fail If you watch a James Bond movie there is usually a point at which 007 is told that the fate of the world is in his hands. Failure is not an option. Constructors are a bit like this. Constructors cannot fail. And this is a problem: Whenever we have written methods in the past we have made sure that their behaviour is error checked so that the method cannot upset the state of our object. For example, attempts to withdraw negative amounts of money from a bank account should be rejected. The whole basis of the way that we have allowed our objects to be manipulated is to make sure that they cannot be broken by the people using them. If you try to do
The Construction of Objects A constructor cannot fail
C# Programming © Rob Miles 2009 99 something stupid with a method call it should refuse to perform the action and return something which indicates that it could not do the job. So we know that when we create a method which changes the data in an object we have to make sure that the change is always valid. For example, we would not let the following call succeed: RobsAccount.PayInFunds (1234567890); There will be an upper limit to the amount of cash you can pay in at once, so the PayInFunds method will refuse to pay the money in. But what is to stop the following: RobsAccount = new Account ("Rob","Hull",1234567890); Like James Bond, constructors are not allowed to fail. Whatever happens during the constructor call, it will complete and a new instance will be created. This poses a problem. It looks as if we can veto stupid values at every point except the one which is most important, i.e. when the object is first created. Programmer’s Point:Managing Failure is Hard Work This brings us on to a kind of recurring theme in our quest to become good programmers. Writing code to do a job is usually very easy. Writing code which will handle all the possible failure conditions in a useful way is much trickier. It is a fact of programming life that you will (or at least should) spend more time worrying about how things fail than you ever do about how they work correctly. Constructors and Exceptions The only way round this at the moment is to have the constructor throw an exception if it is unhappy. This means that the user of the constructor must make sure that they catch exceptions when creating objects, which is not a bad thing. The really clever way to do this is to make the constructor call the set methods for each of the properties that it has been given, and if any of them returns with an error the constructor should throw the exception at that point: public Account (string inName, string inAddress){ if ( SetName ( inName ) == false ) { throw new Exception ( "Bad name " + inName) ; } if ( SetAddress ( inAddress) == false ) { throw new Exception ( "Bad address" + inAddress) ; } } If we try to create an account with a bad name it will throw an exception, which is what we want. The only problem here is that if the address is wrong too, the user of the method will not know this until they have fixed the name and then called the constructor again. I hate it when I'm using a program and this happens. It is normally when I'm filling in a form on the web. I type in my name wrong and it complains about that. Then I put my name right, and it complains about my address. What I want is a way in which I can get a report of all the invalid parts of the item at once. This can be done, at the expense of a little bit of complication:
From Object to Component Bank Notes: Constructing an Account
C# Programming © Rob Miles 2009 100 public Account (string inName, string inAddress){ string errorMessage = ""; if ( SetName ( inName ) == false ) { errorMessage = errorMessage + "Bad name " + inName; } if ( SetAddress ( inAddress) == false ) { errorMessage = errorMessage + " Bad addr " + inAddress; } if ( errorMessage != "" ) { throw new Exception ( "Bad account" + errorMessage) ; } } This version of the constructor assembles an error message which describes everything which is wrong with the account. Each new thing which is wrong is added to the message and then the whole thing is put into an exception and thrown back to the caller. Programmer’s Point:Consider the International Issues The code above assembles a text message and sends it to the user when something bad happens. This is a good thing. However, if you write the program as above this might cause a problem when you install the code in a French branch of the bank. During the specification process you need to establish if the code is ever going to be created in multiple language versions. If it is you will need to manage the storage and selection of appropriate messages. Fortunately there are some C# libraries which are designed to make this easier. Bank Notes: Constructing an Account The issues revolving around the constructor of a class are not directly relevant to the bank account specification as such, since they really relate to how the specification is implemented, and not what the system itself actually does. That said, if the manager says something like "The customer fills in a form, enters their name and address and this is used to create the new account" this gives you a good idea of what parameters should be supplied to the constructor. From Object to Component I take the view that as you develop as a software writer you go through a process of "stepping back" from problems and thinking at higher and higher levels. Posh people call this "abstraction". This is the progress that we have made so far:  representing values by named locations (variables)  creating actions which work on the variables (statements and blocks)  putting behaviours into lumps of code which we can give names to. We can reuse these behaviours and also use them in the design process (methods)  creating things which contain member variables as properties and member methods as actions (objects) Rather than spend a lot of time at the start of a project worrying just how we are going represent an account and precisely what it should do, we just say "We need an account here" and then move on to other things. Later we will come back and revisit the problem in a greater level of detail, and from the point of view of what the Account class needs to do.
From Object to Component Components and Hardware
C# Programming © Rob Miles 2009 101
The next thing to do is consider how we take a further step back and consider expressing a solution using components and interfaces. In this section you will find out the difference between an object and a component, and how to design systems using them. Components and Hardware Before we start on things from a software point of view it is probably worth considering things from a hardware point of view. You should be familiar with the way that, in a typical home computer, some parts are not "hard wired" to the system. For example, the graphics adapter is usually a separate device which is plugged into the main board. This is good; because it means that I can buy a new graphics adapter at any time and fit it into the machine to improve the performance. For this to work properly the people who make main boards and the people who make graphics adapters have had to agree on an interface between two devices. This takes the form of a large document which describes exactly how the two components interact, for example which signals are inputs, which signals are outputs and so on. Any main board which contains a socket built to the standard can accept a graphics card. So, from the point of view of hardware, components are possible because we have created standard interfaces which describe exactly how they fit together. Software components are exactly the same. Why we Need Software Components? At the moment you might not see a need for software components. When we are creating a system we work out what each of the parts of it need to do, and then we create those parts. It is not obvious at this stage why components are required. Well, a system designed without components is exactly like a computer with a graphics adapter which part of the main board. It is not possible for me to improve the graphics adapter because it is "hard wired" into the system. However, it is unfortunately the case that with our bank system we may have a need to create different forms of bank account class. For example, we might be asked to create a "BabyAccount" class which only lets the account holder draw out up to ten pounds each time. This might happen even after we have installed the system and it is being used. If everything has been hard wired into place this will be impossible. By describing objects in terms of their interfaces however, we can use anything which behaves like an Account in this position. Components and Interfaces One point I should make here is that we are not talking about the user interface to our program. The user interface is the way a person using our program would make it work for them. These are usually either text based (the user types in commands and gets responses) or graphical (the user clicks on “buttons” on a screen using the mouse). An interface on the other hand just specifies how a software component could be used by another software component. Please don’t be tempted to answer an exam question about the C# interface mechanism with a long description of how windows and buttons work. This will earn you zero marks.
From Object to Component Implementing an Interface in C#
C# Programming © Rob Miles 2009 102
Interfaces and Design So, instead of starting off by designing classes we should instead be thinking about describing their interfaces, i.e. what it is they have to do. In C# we express this information in a thing called an interface. An interface is simply a set of method definitions which are lumped together. Our first pass at a bank account interface could be as follows: public interface IAccount { void PayInFunds ( decimal amount ); bool WithdrawFunds ( decimal amount ); decimal GetBalance (); } This says that the IAccount interface is comprised of three methods, one to pay money in; another to withdraw it and a third which returns the balance on the account. From the balance management point of view this is all we need. Note that at the interface level I am not saying how it should be done, I am instead just saying what should be done. An interface is placed in a source file just like a class, and compiled in the same way. It sets out a number of methods which relate to a particular task or role, in this case what a class must do to be considered a bank account. Implementing an Interface in C# Interfaces become interesting when we make a class implement them. Implementing an interface is a bit like a setting up a contract between the supplier of resources and the consumer. If a class implements an interface it is saying that for every method described in the interface, it has a corresponding implementation. In the case of the bank account, I am going to create a class which implements the interface, so that it can be thought of as an account component, irrespective of what it really is: public class CustomerAccount : IAccount { private decimal balance = 0; public bool WithdrawFunds ( decimal amount ) { if ( balance < amount ) { return false ; } balance = balance - amount ; return true; } public void PayInFunds ( decimal amount ) { balance = balance + amount ; } public decimal GetBalance () { return balance; } } The code above does not look that different from the previous account class. The only difference is the top line:
From Object to Component References to Interfaces
C# Programming © Rob Miles 2009 103 public class CustomerAccount : IAccount { ... The highlighted part of the line above is where the programmer tells the compiler that this class implements the IAccount interface. This means that the class contains concrete versions of all the methods described in the interface. If the class does not contain a method that the interface needs you will get a compilation error: error CS0535: 'AccountManagement.CustomerAccount' does not implement interface member 'AccountManagement.IAccount.PayInFunds(decimal)' In this case I missed out the PayInFunds method and the compiler complained accordingly. References to Interfaces Once we have made the CustomerAccount class compile, we have now got something which can be regarded in two ways:  as a CustomerAccount (because that is what it is)  as an IAccount (because that is what it can do) People do this all the time. You can think of me in a whole variety of ways, here are two:  Rob Miles the individual (because that is who I am)  A university lecturer (because that is what I can do) If you think of me as a lecturer you would be using the interface that contains methods like GiveLecture. And you can use the same methods with any other lecturer (i.e. person who implements that interface). From the point of view of the university, which has to manage a large number of interchangeable lecturers, it is much more useful for it to think of me as a lecturer, rather than Rob Miles the individual. So, with interfaces we are moving away from considering classes in terms of what they are, and starting to think about them in terms of what they can do. In the case of our bank, this means that we want to deal with objects in terms of IAccount,(the set of account abilities) rather than CustomerAccount (a particular account class). In C# terms this means that we need to be able to create reference variables which refer to objects in terms of interfaces they implement, rather than the particular type that they are. It turns out that this is quite easy: IAccount account = new CustomerAccount(); account.PayInFunds(50); The account variable is allowed to refer to objects which implement the IAccount interface. The compiler will check to make sure that CustomerAccount does this, and if it does, the compilation is successful. Note that there will never be an instance of IAccount interface. It is simply a way that we can refer to something which has that ability (i.e. contains the required methods). This is the same in real life. There is no such physical thing as a "lecturer", merely a large number of people who can be referred to as having that particular ability or role. Using interfaces Now that we have our system designed with interfaces it is much easier to extend it. I can create a BabyAccount class which implements the IAccount interface. This
From Object to Component Implementing Multiple Interfaces
C# Programming © Rob Miles 2009 104 implements all the required methods, but they behave slightly differently because we want all withdrawals of over ten pounds to fail: public class BabyAccount : IAccount { private decimal balance = 0; public bool WithdrawFunds ( decimal amount ) { if (amount > 10) { return false ; } if (balance < amount) { return false ; } balance = balance - amount ; return true; } public void PayInFunds ( decimal amount ) { balance = balance + amount ; } public decimal GetBalance () { return balance; } } The nice thing about this is that as it is a component we don’t have to change all the classes which use it. When we create the account objects we just have ask if a standard account or a baby account is required. The rest of the system can then pick up this object and use it without caring exactly what it is. We will of course have to create some tests especially for it, so that we can make sure that withdrawals of more than ten pounds do fail, but using the new kind of account in our existing system is very easy. Implementing Multiple Interfaces A component can implement as many interfaces as are required. The IAccount interface lets me regard a component purely in terms of its ability to behave as a bank account. However, I may want to regard a component in a variety of ways. For example, the bank will want the account to be able to print itself out on paper. You might think that all I have to do is add a print method to the IAccount interface. This would be reasonable if all I ever wanted to print was bank accounts. However, there will be lots of things which need to be printed, for example warning letters, special offers and the like. Each of these items will be implemented in terms of a component which provides a particular interface (IWarning, ISpecialOffer for example). I don't want to have to provide a print method in each of these, what I really want is a way that I can regard an object in terms of its ability to print. This is actually very easy. I create the interface: public interface IPrintToPaper { void DoPrint (); } Now anything which implements the IPrintToPaper interface will contain the DoPrint method and can be thought of in terms of its ability to print. A class can implement as many interfaces as it needs. Each interface is a new way in which it can be referred to and accessed.
From Object to Component Designing with Interfaces
C# Programming © Rob Miles 2009 105 public class BabyAccount : IAccount, IPrintToPaper { ... This means that a BabyAccount instance behaves like an account and it also contains a DoPrint method which can be used to make it print out. Designing with Interfaces If you apply the "abstraction" technique properly you should end up with a system creation process which goes along the lines of:  gather as much metadata as you can about the problem; what is important to the customer, what values need to be represented and manipulated and the range of those values  identify classes that you will have to create to represent the components in the problem  identify the actions (methods) and the values (properties) that the components must provide  put these into interfaces for each of the components  decide how these values and actions are to be tested  implement the components and test them as you go You can/should do much of this on paper, before you write any code at all. There are also graphical tools that you can use to draw formal diagrams to represent this information. The field of Software Engineering is entirely based on this process. Programmer’s Point:Interfaces are just promises An interface is less of a binding contract, and more a promise. Just because a class has a method called PayInFunds does not mean that it will pay money into the account; it just means that a method with that name exists within the class. Nothing in C# allows you to enforce a particular behaviour on a method; that is down to how much you trust the programmer that made the class that you are using, and how good your tests are. In fact, we sometimes use this to good effect when building a program, in that we can create "dummy" components which implement the interface but don't have the behaviour as such. Bank Notes: Account Interfaces The interface mechanism gives us a great deal of flexibility when making our components and fitting them together. It means that once we have found out what our bank account class needs to hold for us we can then go on to consider what we are going to ask the accounts to do. This is the real detail in the specification. Once we have set out an interface for a component we can then just think in terms of what the component must do, not precisely how it does it. For example, the manager has told us that each bank account must have an account number. This is a very important value, in that it will be fixed for the life of the account and can never be changed. No two accounts should ever have the same number. From the point of view of interface design this means that the account number will be set when the account is created and the account class will provide a method to let us get the value (but there will not be a method to set the account number). We don't care what the method GetAccountNumber actually does, as long as it always returns the value for a particular account. So this requirement ends up being expressed in the interface that is implemented by the account class.
Inheritance Extending a parent class
C# Programming © Rob Miles 2009 106 interface IAccount { int GetAccountNumber (); } This method returns the integer which is the account number for this instance. By placing it in the interface we can say that the account must deliver this value, but we have not actually described how this should be done. The design of the interfaces in a system is just this. They state that we have a need for behaviours, but they do not necessarily state how they are made to work. I have added comments to give more detail about what the method does. The need for things like account numbers, which really need to be unique in the world, has resulted in the creation of a set of methods in the C# libraries to create things called Globally Unique Identifiers or GUIDs. These are data items which are created based on the date, time and certain information about the host computer. Each GUID is unique in the world. We could use these in our Account constructor to create a GUID which allows each account to have a unique number. Inheritance Inheritance is another way we can implement creative laziness. It is a way that we can pick up behaviours from classes and just modify the bits we need to make new ones. In this respect you can regard it as a mechanism for what is called code reuse. It can also be used at the design stage of a program if you have a set of related objects that you wish to create. Inheritance lets a class pick up behaviours from the class which is its parent. You can regard an interface as a statement by a class that it has a set of behaviours because it implements a given interface. If a class is descended from a particular parent class this means that it has a set of behaviours because it has inherited them from its parent. In short: Interface: "I can do these things because I have told you I can" Inheritance: "I can do these things because my parent can" Extending a parent class We can see an example of a use for inheritance in our bank account project. We have already noted that a BabyAccount must behave just like a CustomerAccount except in respect of the cash withdrawal method. Customer accounts can draw out as much as they want. Baby accounts are only allowed to draw up to 10 pounds out at a time. We have solved this problem from a design point of view by using interfaces. By separating the thing that does the job from the description of the job (which is what an interface lets you do) we can get the whole banking system thinking in terms of IAccount and then plug in accounts with different behaviours as required. We can even create brand new accounts at any time after the system has been deployed. These can be introduced and work alongside the others because they behave correctly (i.e. they implement the interface). But this does make things a bit tiresome when we write the program. We need to create a BabyAccount class which contains a lot of code which is duplicated in the CustomerAccount class. "This is not a problem" you probably think "I can use the editor block copy to move the program text across". But:
Inheritance Overriding methods
C# Programming © Rob Miles 2009 107
Programmer’s Point:Block Copy is Evil I still make mistakes when I write programs. You might think that after such a huge number of years in the job I get everything right every time. Wrong. And a lot of the mistakes that I make are caused by improper use of block copy. I write some code and find that I need something similar, but not exactly the same, in another part of the program. So I use block copy. Then I change most, but not all, of the new code and find that my program doesn't work properly. Try not to do this. A great programmer writes every piece of code once, and only once. If you need to use it in more than one place, make it a method. What we really want to do is pick up all the behaviours in the CustomerAccount and then just change the one method that needs to behave differently. It turns out that we can do this in C# using inheritance. When I create the BabyAccount class I can tell the compiler that it is based on the CustomerAccount one: public class BabyAccount : CustomerAccount,IAccount { } The key thing here is the highlighted part after the class name. I have put the name of the class that BabyAccount is extending. This means that everything that CustomerAccount can do, BabyAccount can do. I can now write code like: BabyAccount b = new BabyAccount(); b.PayInFunds(50); This works because, although BabyAccount does not have a PayInFunds method, the parent class does. This means that the PayInFunds method from the CustomerAccount class is used at this point. So, instances of the BabyAccount class have abilities which they pick up from their parent class. In fact, at the moment, the BabyAccount class has no behaviours of its own; it gets everything from its parent. Overriding methods We now know that we can make a new class based on an existing one. The next thing we need to be able to do is change the behaviour of the one method that we are interested in. We want to replace the WithdrawFunds method with a new one. This is called overriding a method. In the BabyAccount class I can do it like this: public class BabyAccount : CustomerAccount,IAccount { public override bool WithdrawFunds (decimal amount) { if (amount > 10) { return false ; } if (balance < amount) { return false ; } balance = balance - amount ; return true; } } The keyword override means "use this version of the method in preference to the one in the parent". This means that code like:
Inheritance Overriding methods
C# Programming © Rob Miles 2009 108
BabyAccount b = new BabyAccount(); b.PayInFunds(50); b.WithdrawFunds(5); The call of PayInFunds will use the method in the parent (since that has not been overridden) but the call of WithdrawFunds will use the method in BabyAccount. Virtual Methods Actually, there is one other thing that we need to do in order for the overriding to work. The C# compiler needs to know if a method is going to be overridden. This is because it must call an overridden method in a slightly different way from a "normal" one. In other words, the above code won't compile properly because the compiler has not been told that WithDrawFunds might be overridden in classes which are children of the parent class. To make the overriding work correctly I have to change my declaration of the method in the CustomerAccount class. public class CustomerAccount : IAccount { private decimal balance = 0; public virtual bool WithdrawFunds ( decimal amount ) { if ( balance < amount ) { return false ; } balance = balance - amount ; return true; } public void PayInFunds ( decimal amount ) { balance = balance + amount ; } public decimal GetBalance () { return balance; } } The keyword virtual means “I might want to make another version of this method in a child class”. You don’t have to override the method, but if you don’t have the word present, you definitely can’t. This makes override and virtual a kind of matched pair. You use virtual to mark a method as able to be overridden and override to actually provide a replacement for the method. Protection of data in class hierarchies It turns out that the code above still won’t work. This is because the balance value in the CustomerAccount class is private. We carefully made it private so that methods in other classes can’t get hold of the value and change it directly. However, this protection is too strict, in that it stops the BabyAccount class from being able to change the value. To get around this problem C# provides a slightly less restrictive access level called protected. This makes the member visible to classes which extend the parent. In other words, methods in the BabyAccount class can see and use a protected member because they are in the same class hierarchy as the class containing the member.
Inheritance Bank Notes: Overriding for Fun and Profit
C# Programming © Rob Miles 2009 109
A class hierarchy is a bit like a family tree. Every class has a parent and can do all the things that the parent can do. It also has access to all the protected members of the classes above it. public class CustomerAccount : IAccount { protected decimal balance = 0; ..... } I’m not terribly happy about doing this, the balance is very important to me and I’d rather that nobody outside the CustomerAccount class could see it. However, for now making this change will make the program work. Later we will see better ways to manage this situation. Bank Notes: Overriding for Fun and Profit The ability to override a method is very powerful. It means that we can make more general classes (for example the CustomerAccount) and customise it to make them more specific (for example the BabyAccount). Of course this should be planned and managed at the design stage. This calls for more metadata to be gathered from the customer and used to decide which parts of the behaviour need to be changed during the lift of the project. We would have made the WithDrawFunds method virtual because the manager would have said “We like to be able to customise the way that some accounts withdraw funds”. And we would have written this down in the specification. Using the base method Remember that programmers are essentially lazy people who try to write code only once for a given problem. Well, it looks as if we are breaking our own rules here, in that the WithDrawFunds method in the BabyAccount class contains all the code of the method in the parent class. We have already noted that we don’t like this much, in that it means that the balance value has to be made more exposed that we might like. Fortunately the designers of C# have thought of this and have provided a way that you can call the base method from one which overrides it. The word base in this context means “a reference to the thing which has been overridden”. I can use this to make the WithDrawFunds method in my BabyAccount much simpler: public class BabyAccount : CustomerAccount,IAccount { public override bool WithdrawFunds (decimal amount) { if (amount > 10) { return false ; } return base.WithdrawFunds(amount); } } The very last line of the WithDrawFunds method makes a call to the original WithDrawFunds method in the parent class, i.e. the one that the method overrides. It is important that you understand what I’m doing here, and why I’m doing it:  I don’t want to have to write the same code twice
Inheritance Making a Replacement Method
C# Programming © Rob Miles 2009 110
 I don’t want to make the balance value visible outside the CustomerAccount class. The use of the word base to call the overridden method solves both of these problems rather beautifully. Because the method call returns a bool result I can just send whatever it delivers. By making this change I can put the balance back to private in the CustomerAccount because it is not changed outside it. Note that there are other useful spin-offs here. If I need to fix a bug in the behaviour of the WithDrawFunds method I just fix it once, in the top level class, and then it is fixed for all the classes which call back to it. Making a Replacement Method This bit is rather painful, but don’t worry too much since it actually does make sense when you think about it. If you play around with C# you will find out that you don’t actually seem to need the virtual keyword to override a method. If I leave it out (and leave out the override too) the program seems to work fine. This is because in this situation there is no overriding, you have just supplied a new version of the method (in fact the C# compiler will give you a warning which indicates that you should provide the keyword new to indicate this): public class BabyAccount : CustomerAccount,IAccount { public new bool WithdrawFunds (decimal amount) { if (amount > 10) { return false ; } if (balance < amount) { return false ; } balance = balance - amount ; return true; } } The problem with this way of working is that you are unable to use base. This makes it more difficult to pick up behaviours from parent classes. Programmer’s Point:Don’t Replace Methods I am very against replacing methods rather than overriding them. If you want to have a policy of allowing programmers to make custom versions of classes in this way it is much more sensible to make use of overriding since this allows a well managed way of using the method that you over-rid. In fact, I’m wondering why I mentioned this at all.. Stopping Overriding Overriding is very powerful. It means that a programmer can just change one tiny part of a class and make a new one with all the behaviours of the parent. This goes well with a design process which means that as you move down the “family tree” of classes you get more and more specific.
Inheritance Bank Notes: Protect Your Code
C# Programming © Rob Miles 2009 111
However, overriding/replacing is not always desirable. Consider the GetBalance method. This is never going to need a replacement. And yet a naughty programmer could write their own and override or replace the one in the parent: public new decimal GetBalance () { return 1000000; } This is the banking equivalent of the bottle of beer that is never empty. No matter how much cash is drawn out, it always returns a balance value of a million pounds! A naughty programmer could insert this into a class and give himself a nice spending spree. What this means is that we need a way to mark some methods as not being able to be overridden. C# does this by giving us a sealed keyword which means “You can’t override this method any more”. Unfortunately this is rather hard to use. The rules are that you can only seal an overriding method (which means that we can’t seal the GetBalance virtual method in the CustomerAccount class) and you can still replace a sealed method. Another use for sealed, which has a bit more potential, is that you can mark a class as sealed. This means that the class cannot be extended, i.e. it cannot be used as the basis for another class. public sealed class BabyAccount : CustomerAccount,IAccount { ..... } The compiler will now stop the BabyAccount from being used as the basis of another account. Bank Notes: Protect Your Code As far as the bank application is concerned, the customer will not have particularly strong opinions on how you use things like sealed in your programs. But they will want to have confidence in the code that you make. One of the unfortunate things about this business is that you will have to allow for the fact that people who use your components might not all be nice and trustworthy. This means that you should take steps when you design the program to decide whether or not methods should be flagged as virtual and also make sure that you seal things when you can do so. For a programming course at this level it is probably a bit heavy handed of me to labour this point just right now, and if it didn’t all make sense there is no particular need to worry, just remember that when you create a program this is another risk that you will have to consider. Constructors and Hierarchies A constructor is a method which gets control during the process of object creation. It is used by a programmer to allow initial values to be set into an object: robsAccount = new CustomerAccount("Rob Miles","Hull"); The code above will only work if the CustomerAccount class has a constructor which accepts two strings, the name and the address of the new customer. You might think that I could solve this by writing a constructor a bit like this:
Inheritance Abstract methods and classes
C# Programming © Rob Miles 2009 112 public CustomerAccount (string inName,decimal inBalance) { name = inName; balance = inBalance; } But this class is an extension of the Account class. In other words, to make a CustomerAccount I have to make an Account. And the account is the class which will have a constructor which sets the name and the initial balance. In this situation the constructor in the child class will have to call a particular constructor in the parent to set that up before it is created. The keyword base is used to make a call to the parent constructor. In other words, the proper version of the customer account constructor is as follows: public CustomerAccount (string inName,decimal inBalance) : base ( inName, inBalance) { } The base keyword is used in the same way as this is used to call another constructor in the same class. The constructor above assumes that the Account class which CustomerAccount is a child of has a constructor which accepts two parameters, the first a string and the second a decimal value. Constructor Chaining When considering constructors and class hierarchies you must therefore remember that to create an instance of a child class an instance of the parent must first be created. This means that a constructor in the parent must run before the constructor in the child. In other words, to create a CustomerAccount you must first create an Account. The result of this is that programmers must take care of the issue of constructor chaining. They must make sure that at each level in the creation process a constructor is called to set up the class at that level. Programmer’s Point:Design your class construction process The means by which your class instances are created is something you should design into the system that you build. It is part of the overall architecture of the system that you are building. I think of these things as a bit like the girders that you erect to hold the floors and roof of a large building. They tell programmers who are going to build the components which are going to implement the solution how to create those components. It is of course very important that you have these designs written down and readily available to the development team. Abstract methods and classes At the moment we are using overriding to modify the behaviour of an existing parent method. However, it is also possible to use overriding in a slightly different context. I can use it to force a set of behaviours on items in a class hierarchy. If there are some things that an account must do then we can make these abstract and then get the child classes to actually provide the implementation. For example, in the context of the bank application we might want to provide a method which creates a warning letter to the customer that their account is overdrawn. This will have to be different for each type of account (we don’t want to use the same language to a baby account holder as we do for an older one). This means that at the time we create the bank account system we know that we need this method, but we don’t know precisely what it does in every situation.
Inheritance Abstract methods and classes
C# Programming © Rob Miles 2009 113
We could just provide a “standard” method in the CustomerAccount class and then rely on the programmers overriding this with a more specific message but we then have no way of making sure that they really do provide the method. C# provides a way of flagging a method as abstract. This means that the method body is not provided in this class, but will be provided in a child class: public abstract class Account { public abstract string RudeLetterString(); } The fact that my new Account class contains an abstract method means that the class itself is abstract (and must be marked as such). It is not possible to make an instance of an abstract class. If you think about it this is sensible. An instance of Account would not know what to do it the RudeLetterString method was ever called. An abstract class can be thought of as a kind of template. If you want to make an instance of a class based on an abstract parent you must provide implementations of all the abstract methods given in the parent. Abstract classes and interfaces You might decide that an abstract class looks a lot like an interface. This is true, in that an interface also provides a “shopping list” of methods which must be provided by a class. However, abstract classes are different in that they can contain fully implemented methods alongside the abstract ones. This can be useful because it means you don’t have to repeatedly implement the same methods in each of the components that implement a particular interface. The problem is that you can only inherit from one parent, so you can only pick up the behaviours of one class. If you want to implement interfaces as well, you may have to repeat methods as well. Perhaps at this point a more fully worked example might help. If we consider our bank account problem we can identify two types of behaviour:  those which every type of bank account must provide (for example PayInFunds and GetBalance)  those which each type of bank account must provide in a way specific to that particular account type (for example WithdrawFunds and RudeLetterString) The trick is to take all the methods in the first category and put them inside the parent class. The methods in the second category must be made abstract. This leads us to a class design a bit like this:
Inheritance Abstract methods and classes
C# Programming © Rob Miles 2009 114
This code repays careful study. Note how I have moved all the things that all accounts must do into the parent Account class. Then I have added customised methods into the child classes where appropriate. Note also though that I have left the interface in place. That is because; even though I now have this abstract structure I still want to public interface IAccount { void PayInFunds ( decimal amount ); bool WithdrawFunds ( decimal amount ); decimal GetBalance (); string RudeLetterString(); } public abstract class Account : IAccount { private decimal balance = 0; public abstract string RudeLetterString(); public virtual bool WithdrawFunds ( decimal amount ) { if ( balance < amount ) { return false ; } balance = balance - amount ; return true; } public virtual decimal GetBalance () { return balance; } public void PayInFunds ( decimal amount ) { balance = balance + amount ; } } public class CustomerAccount : Account { public override string RudeLetterString() { return "You are overdrawn" ; } } public class BabyAccount : Account { public override bool WithdrawFunds ( decimal amount ) { if (amount > 10) { return false ; } return base.WithdrawFunds(amount); } public override string RudeLetterString() { return "Tell daddy you are overdrawn"; } }
Inheritance Bank Notes: Designing with interface and abstract
C# Programming © Rob Miles 2009 115 think of the account objects in terms of their “accountness” rather than any particular specific type. References to abstract classes References to abstract classes work just like references to interfaces. A reference to an Account class can refer to any class which extends from that parent. This might seem useful, as we can consider something as an “account” rather than a BabyAccount. However, I much prefer it if you mange references to abstract things (like accounts) in terms of their interface instead. Bank Notes: Designing with interface and abstract For the purpose of this part of the course you now have broad knowledge of all the tools that can be used to design large software systems. If you have an understanding of what an interface and abstract classes are intended to achieve this will stand you in very good stead for your programming career. Broadly: Interface: lets you identify a set of behaviours (i.e. methods) which a component can be made to implement. Any component which implements the interface can be thought of in terms of a reference of that interface type. A concrete example of this would be something like IPrintHardCopy. Lots of items in my bank system will need to do this and so we could put the behaviour details into the interface for them to implement in their own way. Then our printer can just regard each of the instances that implement this interface purely in this way. Interfaces let me describe a set of behaviours which a component can implement. Once a component can implement an interface it can be regarded purely in terms of a component with this ability. Objects can implement more than one interface, allowing them to present different faces to the systems that use them. Abstract: lets you create a parent class which holds template information for all the classes which extend it. If you want to create a related set of items, for example bank account, receipt, invoice, person then the best way to do this is to set up a parent class which contains abstract and non-abstract methods. The child classes can make use of the methods from the parent and override the ones that need to be provided differently for that particular class. One important consideration though, is that even if you make use of an abstract parent class I reckon that you should still make use of interfaces to reference the accounts. And the reason why goes like this: If our bank takes over another bank and wants to share account information we might need a way to use their accounts. If their accounts are software components too (and they should be) then all we have to do is implement the required interfaces at each end and then our systems understand each other. In other words the other bank must create the methods in the IAccount interface, get their account objects (whatever they are called) to implement the interface and, hey presto, I can now use their accounts. This would be much more difficult if my entire system thought in terms of a parent Account class – since their classes would not fit into this hierarchy at all. Don’t Panic This is all deep stuff. If you don’t get it now, don’t worry. These features of C# are tied up with the process of software design which is a very complex business. The important point to bear in mind is that the features are all provided so that you can solve one problem:
Object Etiquette Objects and ToString
C# Programming © Rob Miles 2009 116
Create software which is packaged in secure, interchangeable components. Interfaces let me describe what each component can do. Class hierarchies let me re-use code inside those components. And that is it. Object Etiquette We have considered objects "in the large", in that we know how they can be used to design and implement large software systems. What we need to do now is take a look at some smaller, but very important, issues that relate to how we use objects in our programs. Objects and ToString We have taken it as read that objects have a magical ability to print themselves out. If I write the code: int i = 99; Console.WriteLine(i); This will print out: 99 The integer somehow seems to know how to print itself out. Now it is time to find out how this is achieved, and also how we can give our own objects the same magical ability. It turns out that this is all provided by the "objectness" of things in C#. We know that an object can contain information and do things for us. (in fact we have seen that the whole basis of building programs is to decide what the objects should do and then make them do these things). We have also seen that you can extend a parent object to create a child which has all the abilities of the parent, plus the new ones that we add. Now we are going to see how these abilities of objects are used in making parts of the C# implementation itself work. The Object class When you create a new class this is not actually created from nowhere. It is in fact a child of the object class. In other words, if I write: public class Account { - this is equivalent to writing: public class Account : object { The object class is a part of C#, and everything is a child of the object class. This has a couple of important ramifications: 1. Every object can do what an object can do. 2. A reference to an object type can refer to any class.
Object Etiquette Objects and ToString
C# Programming © Rob Miles 2009 117
For the purpose of this part of the notes, the first point is the one which has the most importance here. It means that all classes that are made have a number of behaviours that they inherit from their ultimate parent, the object. If you look inside the actual code that makes an object work you will find a method called ToString. The object implementation of ToString returns a string description of the type of that object. The ToString method The system knows that ToString exists for every object, and so if it ever needs the string version of an object it will call this method on the object to get the text. In other words: object o = new object(); Console.WriteLine(o); - would print out: System.Object You can call the method explicitly if you like: Console.WriteLine(o.ToString()); - and the results would be exactly the same. The nice thing about ToString is that it has been declared virtual. This means that we can override it to make it behave how we would like: class Account { private string name; private decimal balance; public override string ToString() { return "Name: " + name + " balance: " + balance; } public Account (string inName, decimal inBalance) { name = inName; balance = inBalance; } } In the tiny Account class above I've overridden the ToString method so that it prints out the name and balance value. This means that the code: Account a = new Account("Rob", 25); Console.WriteLine(a); - would print out: Name: Rob balance: 25 So, from the point of view of good etiquette, whenever you design a class you should provide a ToString method which provides a text version of the content of that class. Getting the string description of a parent object If you want to get hold of a string description of the parent object, you can use the base mechanism to do this. This is sometimes useful if you add some data to a child class and want to print out the content of the parent first:
Object Etiquette Objects and testing for equals
C# Programming © Rob Miles 2009 118 public override string ToString() { return base.ToString() + " Parent : " + parentName; } The method above is from a ChildAccount class. This class extends the CustomerAccont and holds the name of the child's parent. The code above uses the ToString method in the parent object and then tacks the name of the parent on the end before returning it. The nice thing about this is that if the behaviour of the parent class changes, i.e. new members are added or the format of the string changes, the ChildAccount class does not have to change, since it will just make use of the upgraded method. Objects and testing for equals We have seen that when object references are compared a test for equals does not mean the same as it does for values. We know that objects are managed by named tags which refer to unnamed items held in memory somewhere. When we perform an equals test the system simply checks to see if both references refer to the same location. To see how this might cause us problems we need to consider how we would implement a graphical computer game (makes a change from the bank for a while). In the game the various objects in it will be located at a particular place on the screen. We can express this position as a coordinate or point, with an x value and a y value. We then might want to test to see if two items have collided. class Point { public int x; public int y; } This is my point class. I can now create instances of Point and use them to manage my game objects: Point spaceshipPosition = new Point(); spaceshipPosition.x = 1; spaceshipPosition.y = 2; Point missilePosition = new Point(); missilePosition.x = 1; missilePosition.y = 2; if ( spaceshipPosition == missilePosition ) { Console.WriteLine("Bang"); } Note that I've made the x and y members of the Point class public. This is because I'm not that concerned about protecting them, but I do want my program to run quickly. The problem is that the above program code does not work. Even though I have put the spaceship and the missile at the same place on the screen the word Bang is not printed. This is because although the two Point objects hold the same data, they are not located at the same address in memory, which means that the equals test will fail. Adding an Equals method The way that you solve this problem is to provide a method which can be used to compare the two points and see if they refer to the same place. To do this we must override the standard Equals behaviour and add one of our own:
Object Etiquette Objects and testing for equals
C# Programming © Rob Miles 2009 119 public override bool Equals(object obj) { Point p = (Point) obj; if ( ( p.x == x ) && ( p.y == y ) ) { return true; } else { return false; } } The Equals method is given a reference to the thing to be compared. Note that this reference is supplied as a reference to an object. The first thing we need to do is create a reference to a Point. We need to do this because we want to get hold of the x and y values from a Point (we can't get them from an object). The object is cast into a Point and then the x and y values are compared. If they are both the same the method returns true to the caller. This means that I can write code like: if ( missilePosition.Equals(spaceshipPosition) ) { Console.WriteLine("Bang"); } This test will work, because the Equals method actually compares the content of the two points rather than just their references. Note that I didn't actually need to override the Equals method, I could have written one called TheSame which did the job. However, the Equals method is sometimes used by C# library methods to see if two objects contain the same data and so overriding Equals makes my class behave correctly as far as they are concerned. Programmer’s Point:Make sure you use the right equals As a programmer, I must remember that when I'm comparing objects to see if they contain the same data I need to use the Equals method rather than the == operator. Some of the nastiest bugs that I've had to fix have revolved around programmers who have forgotten which test to use. If you are determined to get the right behaviour, C# provides a technology called "operator overriding" where I can provide a new behaviour for the == operator. It is well worth investigating this. Objects and this By now you should be used to the idea that we can use a reference to an object to get hold of the members of that object. Consider: public class Counter { public int Data=0; public void Count () { Data = Data + 1; } } The class above has a single data member and a single method member. The data is a counter. Each time the Count method is called the counter is made one larger. I can use the class as follows:
Object Etiquette Objects and testing for equals
C# Programming © Rob Miles 2009 120
Counter c = new Counter(); c.Count(); Console.WriteLine("Count : " + c.Data); This calls the method and then prints out the data. We know that in this context the . (dot) means "follow the reference to the object and then use this member of the class". this as a reference to the current instance I hate explaining this. I want to use the word this to mean this, but this also has a special meaning within your C# programs. Perhaps the best way to get around the problem is to remember that when I use the word this I mean "a reference to the currently executing instance of a class". When a method in a class accesses a member variable the compiler automatically puts a this. in front of each use of a member of the class. In other words, the "proper" version of the Counter class is as follows: public class Counter { public int Data=0; public void Count () { this.Data = this.Data + 1; } } We can add a this. if we like to make it explicit that we are using a member of a class rather than a local variable. Passing a reference to yourself to other classes Another use for this is when a class needs to provide a reference to itself to another class that wants to use it. It can simply pass this as a parameter to a method call. x.AddItem(this); I call the method AddItem on x to give it a reference to the currently executing object. If this hurts your head, then don't worry about it for now. Confusion with this I reckon that using this is a good idea. It means that people reading my code can tell instantly whether I am using a local variable or a member of the class. However it might take a bit of getting used to. If I have a member of my class which contains methods, and I want to use one of those methods, I end up writing code like this: this.account.SetName("Rob"); This means "I have a member variable in this class called account. Call the SetName method on that member to set the name to 'Rob'". Bank Notes: Good Manners are a Good Idea It is considered good manners to provide the Equals and ToString methods in the classes that you create. These will allow your classes to fit in with others in the C# system. It is also very useful to make appropriate use of this when writing methods in classes. When you start to create your bank account management system you should arrange a meeting of all the programmers involved and make them aware that you will be insisting on good mannered development like this. In fact, for a professional approach you should set out standards which establish which of these methods you are
The power of strings and chars String Manipulation
C# Programming © Rob Miles 2009 121 going to provide. You will expect all programmers to write to these standards if they take part in the project. Programmer’s Point:Always provide an equals behaviour The customer for our bank account management program is very keen that every single bank account that is created is unique. If the bank ever contains two identical accounts this would cause serious problems. The fact that everything in the system is required to be unique might lead you to think that there is no need to provide a way to compare two Account instances for equality. “If the system will never contain two things that are the same, why should I waste time writing code to compare them in this way?”. However, there is a very good reason why you might find an equals behaviour very useful. When you write the part of the program which stores data and brings it back again you will find it very useful to have a way of testing that what comes back from the store is identical to what you put there. In this situation an equals behaviour is important, and so I reckon you should always provide one. The power of strings and chars It is probably worth spending a few moments considering the string type in a bit more detail. This is because it gives you a lot of nice extra features which will save you a lot of work. These are exposed as methods which you can call on a string reference. The methods will return a new string, transformed in the way that you ask. You can sort out the case of the text, trim spaces off the start and end and extract sub-strings using these methods. String Manipulation Strings are rather special. I regard them as a bit like bats. A bat can be regarded as either an animal or a bird in many respects. A string can be regarded as either an object (referred to by means of a reference) or a value (referred to as a value). This hybrid behaviour is provided because it makes things easier for us programmers. However it does mean that we have to regard strings as a bit special when you are learning to program, because they seem to break some of the rules that we have learnt. String Transformation It is very important that you understand what happens when you transform a string. This is because, although strings are objects, they don't actually behave like objects all the time. string s1="Rob"; string s2=s1; s2 = "different"; Console.WriteLine(s1 + " " + s2); If you think you know about objects and references, you should be expecting s1 to change when s2 is changed. This does not happen though, because C# regards an instance of a string type in a special way. It calls it immutable. This is because programmers want strings to behave a bit like values in this respect.
The power of strings and chars String Manipulation
C# Programming © Rob Miles 2009 122
Immutable strings The idea is that if you try to change a string, the C# system instead creates a new string and makes the reference you are "changing" refer to the changed one. In other words, when the system sees the line: s2 = "different"; - it makes a new string which contains the text "different" and makes s2 refer to that. The thing that s1 is referring to is unchanged. So, after the assignment s1 and s2 no longer refer to the same object. This behaviour, never allowing a thing to be changed by making a new one each time it is required, is how the system implements immutable. You might ask the question: "Why go to all the trouble?" It might seem all this hassle could be saved by just making strings into value types. Well, no. Consider the situation where you are storing a large document in the memory of the computer. By using references we only actually need one string instance with the word “the” in it. All the occurrences in the text can just refer to that one instance. This saves memory and it also makes searching for words much faster. String Comparison The special nature of strings also means that you can compare strings using equals and get the behaviour you want: if ( s1 == s2 ) { Console.WriteLine("The same"); } If s1 and s2 were proper reference types this comparison would only work if they referred to the same object. But in C# the comparison works if they contain the same text. You can use an equals method if you prefer: if ( s1.Equals(s2) ) { Console.WriteLine("Still the same"); } String Editing You can read individual characters from a string by indexing them as you would an array: char firstCh = name[0]; This would set the character variable firstCh to the first character in the string. However, you can't change the characters: name[0] = 'R'; - would cause a compilation error because strings are immutable. You can pull a sequence of characters out of a string using the SubString method: string s1="Rob"; s1=s1.Substring(1,2); The first parameter is the starting position and the second is the number of characters to be copied. This would leave the string "ob" in s1.(remember that strings are indexed starting at location 0). You can leave out the second parameter if you like, in which case all the characters up to the end of the string are copied:
The power of strings and chars String Manipulation
C# Programming © Rob Miles 2009 123 string s1="Miles"; s1=s1.Substring(2); - would leave "les" in s1. String Length All of the above operations will fail if you try to do something which takes you beyond the length of the string. In this respect strings are just like arrays. It is also possible to use the same methods on them to find out how long they are: Console.WriteLine ( "Length: " + s1.Length); The length property gives the number of characters in the string. Character case Objects of type string can be asked to create new, modified, versions of themselves in slightly different forms. You do this by calling methods on the reference to get the result that you want: s1=s1.ToUpper(); The ToUpper method returns a version of the string with all the letters converted to UPPER CASE. No other characters in the string are changed. There is a corresponding ToLower method as well. Trimming and empty strings Another useful method is Trim. This removes any leading or trailing spaces from the string. s1=s1.Trim(); This is useful if your users might have typed " Rob " rather than "Rob". If you don't trim the text you will find equals tests for the name will fail. There are TrimStart and TrimEnd methods to just take off leading or trailing spaces if that is what you want. If you trim a string which contains only spaces you will end up with a string which contains no characters (i.e. its length is zero). Character Commands The char class also exposes some very useful methods which can be used to check the values of individual characters. These are static methods which are called on the character class and can be used to test characters in a variety of ways: char.IsDigit(ch) returns true if the character is a digit (0 to 9) char.IsLetter(ch) returns true if the character is a letter (a to z or A to Z) char.IsLetterOrDigit(ch) returns true if the character is a letter or a digit char.IsLower(ch) returns true if the character is a lower case letter char.IsUpper(ch) returns true if the character is an upper case letter char.IsPunctuation(ch) returns true if the character is a punctuation character char.IsWhiteSpace(ch) returns true if the character is a space, tab or newline
Properties Properties as class members
C# Programming © Rob Miles 2009 124
You can use these when you are looking through a string for a particular character. String Twiddling with StringBuilder If you really want to twiddle with the contents of your strings you will find the fact that you can't assign to individual characters in the string a real pain. The reason you are suffering is that strings are really design to hold strings, not provide a way that they can be edited. For proper string editing C# provides a class called StringBuilder. It is found in the System.Text namespace. It works a lot like a string, but you can assign to characters and even replace one string with another. It is also very easy to convert between StringBuilder instances and strings. You should look this up if you have a need to do some proper editing. Properties Properties are a nice bit of sugar coating. They are a bit like the switch keyword, which lets us select things easily. We don't need properties, but C# provides them because they make programs slightly easier to write and simpler to read. Properties as class members A property is a member of a class that holds a value. We have seen that we can use a member variable to do this kind of thing, but we need to make the member value public. For example, the bank may ask us to keep track of staff members. One of the items that they may want to hold is the age of a member of staff. I can do it like this: public class StaffMember { public int Age; } The class contains a public member. I can get hold of this member in the usual way: StaffMember s = new StaffMember(); s.Age = 21; I can access a public member of a class directly; just by giving the name of the member. The problem is that we have already decided that this is a bad way to manage our objects. There is nothing to stop things like: s.Age = -100210232; This is very naughty, but because the Age member is public we cannot stop it. Creating Get and Set methods To get control and do useful things we can create get and set methods which are public. These provide access to the member in a managed way. We then make the Age member private and nobody can tamper with it:
Properties Using Properties
C# Programming © Rob Miles 2009 125 public class StaffMember { private int age; public int GetAge() { return this.age; } public void SetAge( int inAge ) { if ( (inAge > 0) && (inAge < 120) ) { this.age = inAge; } } } We now have complete control over our property, but we have had to write lots of extra code. Programmer’s who want to work with the age value now have to call methods: StaffMember s = new StaffMember(); s.SetAge(21); Console.WriteLine ( "Age is : " + s.GetAge() ); Using Properties Properties are a way of making the management of data like this slightly easier. An age property for the StaffMember class would be created as follows: public class StaffMember { private int ageValue; public int Age { set { if ( (value > 0) && (value < 120) ) { this.ageValue = value; } } get { return this.ageValue; } } } The age value has now been created as a property. Note how there are get and set parts to the property. These equate directly to the bodies of the get and set methods that I wrote earlier. The really nice thing about properties is that they are used just as the class member was: StaffMember s = new StaffMember(); s.Age = 21; Console.WriteLine ( "Age is : " + s.Age ); When the Age property is given a value the set code is run. The keyword value means “the thing that is being assigned”. When the Age property is being read the get code is run. This gives us all the advantages of the methods, but they are much easier to use and create. I can do other clever things too:
Properties Properties and interfaces
C# Programming © Rob Miles 2009 126 public int AgeInMonths { get { return this.ageValue*12; } } This is a new property, called AgeInMonths. It can only be read, since it does not provide a set behaviour. However, it returns the age in months, based on the same source value as was used by the other property. This means that you can provide several different ways of recovering the same value. You can also provide read-only properties by leaving out the set behaviour. Write only properties are also possible if you leave out the get. Properties and interfaces Interfaces are a way that you can bring together a set of behaviours. They are packaged as a list of methods which a class must contain if it implements the interfaces. It is also possible to add properties to interfaces. You do this by leaving out the statements which are the body of the get and set behaviours: interface IStaff { int Age { get; set; } } This is an interface that specifies that classes which implement it must contain an Age property with both get and set behaviours. Property problems Properties are really neat, and they are used throughout the classes in the .NET libraries. But there are a few things that you need to be aware of when deciding whether or not to use them: Property Assignment Failure We have seen that the set behaviour can reject values if it thinks they are out of range. This is OK, but it has no way of telling the user of the property that this has happened. With our Age property above the code: s.Age = 121; - would fail. However, the person performing the assignment would not be aware of this, since there is no way that the property can return a value which indicates success or failure. The only way that a property set method could do this would be to throw and exception, which is not a good way to go on. A SetAge method on the other hand could return a value which indicates whether or not it worked:
Building a Bank Property problems
C# Programming © Rob Miles 2009 127 public bool SetAge( int inAge ) { if ( (inAge > 0) && (inAge < 120) ) { this.age = inAge; return true; } return false; } A programmer setting the age value can now find out if the set worked or failed. If there is a situation where a property assignment can fail I never expose that as a property. I suppose that it would be possible to combine a set method and a get property, but I reckon that would be madness. Properties Run Code When you assign a value to a property you are actually calling a method. Unfortunately there is no way you can tell that from the code which does the assignment: s.Age = 99; This looks very innocent, but could result in a thousand lines of code running inside the set property. It is possible to use this to advantage, in that an object can react to and track property changes. But it can also be made very confusing. Programmer’s Point:Don’t use new fangled stuff just because it is there Programmer’s love new shiny toys. They are very keen to use language features to show off. Properties can be a bit like this. When considering properties versus get and set methods I am rather a fan of the old fashioned get and set methods because you know where you are with these. On the other hand I can see where properties might make life easier, if used in the correct way. When you are deciding whether or not to use a language feature you need to ask yourself whether it is the best way to do the job. If you are using a feature just because it is cool, you might not be doing things the best way. Building a Bank We are now in a situation where we can create working bank accounts. We can use interfaces to define the behaviour of a bank account component. This gives us a way of creating new types of account as the bank business develops. What we now need is a way of storing a large number of accounts. This container class will provide methods which allow us to find a particular account based on the name of the holder. We can express the behaviour that we need from our bank in terms of an interface: interface IBank { IAccount FindAccount (string name); bool StoreAccount (IAccount account); } A class which implements these methods can be used for the storage of accounts. I can put an account into it and then get it back again:
Building a Bank Property problems
C# Programming © Rob Miles 2009 128
IBank friendlyBank = new ArrayBank (50); IAccount account = new CustomerAccount("Rob", 0); if (friendlyBank.StoreAccount(account)) { Console.WriteLine ( "Account stored OK" ); } The code above creates a bank and then puts an account into it, printing out a message if the storage worked. Storing Accounts in an array The class ArrayBank is a bank account storage system which works using arrays. When you create an instance of an ArrayBank you tell it how many accounts you want to store by means of the constructor. In the code above we are creating a bank with enough room for references to 50 accounts. The constructor creates an array of the appropriate size when it is called: private IAccount [] accounts ; public ArrayBank( int bankSize ) { accounts = new IAccount[bankSize]; } Note that it is very important that you understand what has happened here. We have not created any accounts at all. What we have created is an array of references. Each reference in the array can refer to an object which implements the IAccount interface. But at the moment none of the references refer anywhere, they are all set to null. When we add an account to the bank we simply make one of the references refer to that account instance. We never place an account "in" the array; instead we put a reference to that account in the array. The diagram shows the state of the accounts array after we have stored our first account. The light coloured elements are set to null. The element at the start of the array contains a reference to the account instance. The method to add an account to our bank has to find the first empty location in the array and set this to refer to the account that has been added: Name : "Rob" Balance : 0 accounts
Building a Bank Property problems
C# Programming © Rob Miles 2009 129 public bool StoreAccount (IAccount account) { int position = 0; for (position = 0; position 10) { return false; } return base.WithdrawFunds(amount); } public BabyAccount( string newName, decimal initialBalance, string inParentName) : base(newName, initialBalance) { parentName = inParentName; } } This is a complete BabyAccount implementation. It contains an additional property, parentName, and overrides the WithdrawFunds method to provide the new behaviour. Note that I have created a constructor which is supplied with the name of the account holder, the starting balance and the name of the parent. This makes use of the constructor in the parent to set the balance and name, and then sets the parent name. I can create a BabyAccount as follows: BabyAccount babyJane = new BabyAccount ("Jane", 20, "John"); This would create a new BabyAccount instance and set the reference babyJane to refer to it.
Storing Business Objects Handling different kinds of accounts
C# Programming © Rob Miles 2009 143
Saving a child class When we want to save a BabyAccount we also need to save the information from the parent class. This turns out to be very easy, as long as we use the save method which sends the information to a stream: public override void Save(System.IO.TextWriter textOut) { base.Save(textOut); textOut.WriteLine(parentName); } This method overrides the Save method in the parent CustomerAccount. However, it first calls the overridden method in the parent to save the CustomerAccount data. Then it performs the save behaviour required by the BabyAccount class. This is very good design, as it means that if the data content and save behaviour of the parent class changes we don't need to change the behaviour of the child. Loading a child class We could create a static load method for the BabyAccount which reads in the information and constructs a new BabyAccount: public static BabyAccount Load( System.IO.TextReader textIn) { BabyAccount result = null; try { string name = textIn.ReadLine(); string balanceText = textIn.ReadLine(); decimal balance = decimal.Parse(balanceText); string parent = textIn.ReadLine(); result = new BabyAccount (name, balance, parent); } catch { return null; } return result; } However, I'm not particularly keen on this approach. This method breaks one of the rules of good design, in that we now have a dependency between the two classes which means that when I change the CustomerAccount class (perhaps to add a new field called customerPIN) I also have to update the Load method in the BabyAccount class to make sure that this extra data is loaded. If I forget to do this the program will compile, but when it runs it will not work correctly. What we really want to do is make the CustomerAccount responsible for loading its data and the BabyAccount just look after its content; in a similar way to the way the save method uses the base keyword to save the parent object. The way to do this is to go back to the construction process. We know that a constructor is a method which gets control when an instance of a class is being created. A constructor can be used to set up the data in the instance, and it can be passed information to allow it to do this. In the code above there is a constructor for the BabyAccount class which accepts the three data items that the BabyAccount holds and then sets the instance up with these values. What we do is create constructors for the CustomerAccount and BabyAccount classes which read their information from a stream that is supplied to them:
Storing Business Objects Handling different kinds of accounts
C# Programming © Rob Miles 2009 144 public CustomerAccount(System.IO.TextReader textIn) { name = textIn.ReadLine(); string balanceText = textIn.ReadLine(); balance = decimal.Parse(balanceText); } This constructor sets up the new CustomerAccount instance by reading the values from the stream that is supplied with. I can therefore write code like this: System.IO.TextReader textIn = new System.IO.StreamReader(filename); result = new CustomerAccount(textIn); textIn.Close(); This creates a new CustomerAccount from the stream. Now I can create a constructor for the BabyAccount which uses the constructor of the parent class: public BabyAccount(System.IO.TextReader textIn) : base (textIn) { parentName = textIn.ReadLine(); } This removes the dependency relationship completely. If the behaviour of the CustomerAccount constructor changes we do not have to change the BabyAccount at all. Note that these constructors do not do any error checking, they just throw exceptions if something goes wrong. Bearing in mind that the only way that a constructor can fail is to throw an exception anyway, this is reasonable behaviour. Interfaces and the save operation When we started this account development we set out an interface which describes all the things which an instance of an account should be able to do. At the start this did not include the save behaviours, but it could be updated to include them: public interface IAccount { void PayInFunds ( decimal amount ); bool WithdrawFunds ( decimal amount ); decimal GetBalance (); string GetName(); bool Save(string filename); void Save(System.IO.TextWriter textOut); } We can now ask any item which implements the IAccount interface to save itself to either a file or a stream. This is very useful when we store our collection of accounts, since the account container will not have to behave differently depending on what kind of account it is saving, it just has to call the save method for the particular instance. This is a good idea. Loading and factories When it comes to loading our classes back, things get a little trickier. You might think it would be sensible to add load methods to the IAccount interface, so that we can ask instances of a particular kind of account to load themselves. However, there is a problem here, in that when we are loading the accounts we don't actually have an instance to call any methods on. Also, bearing mind we are reading from a stream of data, we don't actually know what kind of item we are loading.
Storing Business Objects Handling different kinds of accounts
C# Programming © Rob Miles 2009 145
The solution to this problem is to identify the type of each instance in the steam when we save the classes. The save method for our bank could look like this: public void Save(System.IO.TextWriter textOut) { textOut.WriteLine(bankHashtable.Count); foreach (CustomerAccount account in bankHashtable.Values) { textOut.WriteLine(account.GetType().Name); account.Save(textOut); } } This looks very like our original method, except that it has an additional line, which has been highlighted. This writes out the name of the class. It makes use of the method GetType(), which can be called on an instance of a class to get the type of that class. Having got the type we can then get the Name property of this type and print that. In other words, if the account is of type CustomerAccount the program will output: CustomerAccount Rob 100 The output now contains the name of the type of each class that has been written. This means that when the stream is read back in this information can be used to cause the correct type of class to be created. The neatest way to do this is to create a factory which will produce instances of the required class: class AccountFactory { public static IAccount MakeAccount( string name, System.IO.TextReader textIn) { switch (name) { case "CustomerAccount": return new CustomerAccount(textIn); case "BabyAccount": return new BabyAccount(textIn); default: return null; } } } This class only contains a single method, which is static. The method is given two parameters, the name of the class to be created and a stream to read from. It uses the name to decide which item to make, creates one, and then returns that to the caller. If the name is not recognized it returns null. The bank load method can use this factory to create instances of accounts as they are loaded:
Business Objects and Editing Handling different kinds of accounts
C# Programming © Rob Miles 2009 146 public static HashBank Load(System.IO.TextReader textIn) { HashBank result = new HashBank(); string countString = textIn.ReadLine(); int count = int.Parse(countString); for (int i = 0; i < count; i++) { string className = textIn.ReadLine(); IAccount account = AccountFactory.MakeAccount(className, textIn); result.bankHashtable.Add(account.GetName(), account); } return result; } Again, this looks very like our original load method, except that it uses the factory to make account instances once it has read the name of the class from the stream. Factory Dependencies Note that we now have a genuine dependency between our system and the factory class. If we ever add a new type of account we need to update the behavioru of the factory so that it contains a case to deal with the new account type. There is in fact a way of removing the need to do this. It involves writing code which will search for C# classes which implement particular interfaces and creating them automatically. However this kind of stuff is beyond the scope of this text. Bank Notes: Messy Code You might think that the solutions above are rather messy. The way that we manage the saving of items (by using a method in the class) loading (by using a constructor) is not symmetrical. However, there is no dishonour in this way of working. When you want to move from objects to storage and back you will find that you hit these issues and this solution is as good as any I've found. Business Objects and Editing We have seen how to design a class which can be used to hold information about the customers in our bank. We now also know how to save the information in a class instance, and also perform this for a large number of items of a range of different types. Now we need to consider how we can make our account management system genuinely useful, by providing a user interface which lets people interact with our business objects to run the bank. Programmer’s Point:Production Code From now on all the code examples are going to be given in the context of production code. This is code which I would be happy to have supplied in a product. This means that I will be considering what things you should look at when you are writing code for real customers. This might make the examples a bit more complex that you might like, but I reckon this is worth doing since it is important you start to understand that what you are writing now, and the problems you are grappling with, are just those that "real" programmers are up against.
Business Objects and Editing The role of the Business Object
C# Programming © Rob Miles 2009 147
The role of the Business Object We have taken a very strict line in our banking system to stop any of the bank account components from actually talking to the user. This is because classes like CustomerAccount are what is called business objects. It is not their job to talk to users; they are strictly concerned with keeping track of the information in the bank account of the customer. The job of the business object is to make sure that the data that it holds is always correct. The editing behaviours should make use of the methods that the business object exposes. Managing a bank account name As an example, consider the name of the bank account holder. It is important that this is always stored safely but people may want to change their name from time to time. This means that the business object must provide a way that the name can be changed. However, there is more to it than just changing one string for another. The new name must be a valid one. This means that the account must be able to reject names it doesn't like. If it is going to reject names it would be very useful to the user if they could be told why a given name was not valid, so the validation process should provide feedback as to why it did not work. A good software engineer would provide something like this: private string name; public string GetName() { return this.name; } public static string ValidateName ( string name ) { if ( name == null ) { return "Name parameter null"; } string trimmedName = name.Trim(); if ( trimmedName.Length == 0 ) { return "No text in the name"; } return ""; } public bool SetName ( string inName ) { string reply ; reply = ValidateName(inName); if ( reply.Length > 0 ) { return false; } this.name = inName.Trim(); return true; } The name is stored as a private member of the account class. The programmer has provided three methods which let the users of my Account class deal with names. There is a method to get the name, another to set it and another to validate it. The validate method is called by the set method so that my business object makes sure that an account never has an invalid name. The validate method will reject a name string which is empty, or just contains spaces. It trims off all the spaces before and after the
Business Objects and Editing The role of the Business Object
C# Programming © Rob Miles 2009 148 name text and then checks to see if the length of the resulting string is empty. If it is, the string is rejected. I provide the validate method so that users of my class can check their names to make sure that they are valid. This does not involve me in much extra work, since I also use the method myself when I validate the name. The validate method returns a string which gives an error message if the string is rejected. There may be several reasons why a name is not valid, at the moment I've just given two. The reasons why a name is invalid are of course part of the metadata for the project. I’ve also made this method static so that names can be validated without needing to have an actual instance of the account. Testing Name Handling Of course, once we have these methods, the natural thing to do is create tests for them: string reply; reply = CustomerAccount.ValidateName(null); if (reply != "Name parameter null") { Console.WriteLine("Null name test failed"); } reply = CustomerAccount.ValidateName(""); if (reply != "No text in the name") { Console.WriteLine("Empty name test failed"); } reply = CustomerAccount.ValidateName(" "); if (reply != "No text in the name") { Console.WriteLine("Blank string name test failed"); } CustomerAccount a = new CustomerAccount("Rob", 50); if (!a.SetName("Jim")) { Console.WriteLine("Jim SetName failed"); } if ( a.GetName() != "Jim" ) { Console.WriteLine("Jim GetName failed"); } if (!a.SetName(" Pete ")) { Console.WriteLine("Pete trim SetName failed"); } if ( a.GetName() != "Pete" ) { Console.WriteLine("Pete GetName failed"); } These are all the tests I could think of. First I test ValidateName to make sure that it rejects both kinds of empty string. Then I make sure that I can set the name on an account. Finally I check that the space trimming for the names works correctly.
Business Objects and Editing The role of the Business Object
C# Programming © Rob Miles 2009 149
Programmer’s Point:Use Numbers Not Messages There is one issue which I have not addressed in my sample programs which stops them from being completely perfect. And that is the matter of error handling. At the moment the errors supplied by my validation methods are strings. In a genuine production environment the errors would be numeric values. This is because they are much easier to compare in tests and it also means that my program could be made to work in a foreign language very easily. All I would need is a lookup table to convert the message number to an appropriate string in the currently active language. You should consider issues like this as part of the metadata in your project. The fact that the system must work in France and Germany is something you need to be aware of right at the start. Editing the Name We now have a business object that provides methods which let us edit the name value. I can now write code to edit this property: while (true) { Console.Write ( "Enter new name : " ) ; newName = Console.ReadLine(); string reply; reply = account.ValidateName(newName); if ( reply.Length == 0 ) { break; } Console.WriteLine( "Invalid name : " + reply ); } account.SetName(newName); This code will perform the name editing for an account instance referred to by account. It will read a new name in. If the name is valid the loop is broken and the name is set. If the name is not valid the message is printed and the loop repeats. This is not the most elegant solution, but it does keep the user informed of what it is doing and it does work. Now that we have our edit code we need to put it somewhere. Creating an Editor class The best way to do this is to create a class which has the job of doing the editing. This class will work on a particular account that needs to be edited. There will be a dependency between the editor class and the account class, in that if the account class changes the editor may need to be updated, but this is something we will just have to live with. When I want to edit an account I create an editor instance and pass it a reference to the account instance:
Business Objects and Editing The role of the Business Object
C# Programming © Rob Miles 2009 150
This is my account editor class. At the moment it can only edit the name, but I will add other edit methods later. The class keeps track of the account it is editing, I pass it a reference to this account when I construct it. I would use the name editor as follows: CustomerAccount a = new CustomerAccount("Rob", 50); AccountEditTextUI edit = new AccountEditTextUI(a); edit.EditName(); This code creates an instance of a customer account. It then creates an editor object and asks it to edit the name of that account. Note that the editor class is passed a reference to the IAccount interface, not a references to the account class. This means that anything which behaves like an account can be edited using this class. Note also that the editor remembers the account class that is being edited so that when I call EditName it can work on that reference. Programmer’s Point:Get used to passing references around It is important that you get used to the idea of passing references between methods. If I want to "give" a class something to work on I will do this by calling a method in that class and passing the reference as a parameter to this method. In the case of the above code the method that I am calling is actually the constructor, but the principle remains the same. public class AccountEditTextUI { private IAccount account; public AccountEditTextUI(Account inAccount) { this.account = inAccount; } public void EditName () { string newName; Console.WriteLine("Name Edit"); while (true) { Console.Write ( "Enter new name : " ) ; newName = Console.ReadLine(); string reply; reply = this.account.ValidateName(newName); if ( reply.Length == 0 ) { break; } Console.WriteLine( "Invalid name : " + reply ); } this.account.SetName(newName); } }
Business Objects and Editing A Text Based Edit System
C# Programming © Rob Miles 2009 151
A Text Based Edit System We now have a single method in our editor class which can be used to edit the name of a bank account. What we really want is a menu system which takes a command from the user and performs that function: Editing account for Pete Enter name to edit name Enter pay to pay in funds Enter draw to draw out funds Enter exit to exit program Enter command : The user types in the name of the command that is required and then the program selects that function. My edit class contains a method which does this: This is my edit method which repeatedly reads commands and dispatches them to the appropriate method. I've extended the account class to manage the account balance and added edit methods which pay in funds and withdraw them. Note that I trim the command string and convert it to lower case before using it to drive the switch construction which selects the command. The edit method is passed a reference to the account which is being edited. It then passes that reference to the service methods which will do the actual work. public void DoEdit (CustomerAccount account) { string command; do { Console.WriteLine ( "Editing account for {0}", account.GetName() ); Console.WriteLine ( " Enter name to edit name" ); Console.WriteLine ( " Enter pay to pay in funds" ); Console.WriteLine ( " Enter draw to draw out funds" ); Console.WriteLine ( " Enter exit to exit program" ); Console.Write ("Enter command : "); command = Console.ReadLine(); command = command.Trim(); command = command.ToLower(); switch ( command ) { case "name" : EditName(account); break; case "pay" : PayInFunds(account); break; case "draw" : WithDrawFunds(account); break; } } while ( command != "exit" ); }
A Graphical User Interface Creating a Form
C# Programming © Rob Miles 2009 152
Programmer’s Point:Every Message Counts You should remember that every time your program sends text to the user you may have a problem with language. The menu for my bank account edit method sample code prints out text which is hard wired to English. In a properly written program this would be managed in terms of message numbers to make it easier to change the text which is output. As a general rule in a production system you should never write out straight text to your user (this includes the names of commands that the user might type in). Everything should be managed in terms of message numbers. The only exception to this is the situation where the customer has assured you that the program will only ever be written for use in a particular language. The C# libraries contain a set of resources which help you manage the internationalization of your programs. Bank Notes: More Than One User Interface The bank may have a whole range of requirements for editing account details. These will range from an operator in a call centre, an operator on a dial up terminal, a customer on a mobile phone and a customer at a cash machine. I hope that you can see that the only way we can manage all these different ways of interacting with the bank account is to separate the business object (the account itself) from the input/output behaviour. Note that we never do things like allow the user interface code to decide what constitutes a valid name. This question is not the responsibility of the front end. The only thing that can decide on the validity of a name is the account object itself. The user interface must always work on the basis that it will use the business object to perform this kind of validation. A Graphical User Interface It should come as no surprise that a graphical user interface on the screen is represented by objects. When we are dealing with windows on the screen our program is actually calling methods in the objects to make them do things like change size and colour. Creating a Form If I want a form on the screen for the user to interact with, I need to create an instance of an object to do this for me. The object that I create is a Form. This class can be found in the System.Windows.Forms namespace. I can create an instance of this class and ask it to do things for me:
A Graphical User Interface Creating a Form
C# Programming © Rob Miles 2009 153 using System.Windows.Forms; class FormsDemo { public static void Main () { Form f = new Form(); f.ShowDialog(); } } The Form class provides a method called ShowDialog. This asks the form to show itself and pause the program until the form is closed. If I run the program above the following appears on the screen: When the window is closed with the red button, it disappears and the program ends. Adding Components to a Form A form is a container. It can 'contain' a number of graphical components which are used to build the user interface. We must create the components and add them to the form to make our user interface. For example, to add a label to the form we can do the following: using System.Windows.Forms; class FormsDemo { public static void Main () { Form f = new Form(); Label title = new Label (); title.Text="Hello"; f.Controls.Add(title); f.ShowDialog(); } } This creates a label, sets the text property of the label to “Hello” and then adds it to the controls which are contained by the frame. The result of this code is a form which looks like this: I can fiddle with the properties of a component to move it around on the screen and do lots of interesting things:
A Graphical User Interface Creating a Form
C# Programming © Rob Miles 2009 154 using System.Windows.Forms; using System.Drawing; class FormsDemo { public static void Main () { Form f = new Form(); Label title = new Label (); title.Text="Hello"; title.Top=50; title.Left=50; title.ForeColor = Color.Red; title.BackColor = Color.Yellow; f.Controls.Add(title); f.ShowDialog(); } } The position on the screen is given in pixels (a pixel being an individual dot on the screen). The origin (i.e. the pixel at 0,0) is in the top left hand corner of the screen. The Color class is found in the System.Drawing namespace. It provides a whole set of static colour values and also lets you create your own colours by setting the intensity of the red, green and blue components. The program above would display a form as below: By adding a number of labels on the form and positioning them appropriately we can start to build up a user interface. Editing Text with a TextBox Component Displaying labels is all very well, but what I want to do is provide a way that the name text can be edited. The Windows Forms library provides a TextBox component which is used for this. This is a component just like a label, but it provides text edit behaviour. I can set the text property of the TextBox to the text I want to have edited. The user can then enter text into the textbox and modify it. I can then read the text property back when I want the updated value. The TextBox gives me a great deal of functionality for very little effort on my part. It lets the user cut and paste text in and out of the box using the Windows clipboard. It lets the user type in huge amounts of text and scrolls the text around to make it fit in the box. In short, it behaves like every text field you've ever used on a windows screen. This is because it is actually the same thing as every text field you've ever used. I can create and use a TextBox in my program as follows:
A Graphical User Interface Creating a Form
C# Programming © Rob Miles 2009 155 using System.Windows.Forms; using System.Drawing; class FormsDemo { public static void Main() { Form f = new Form(); Label nameLabel = new Label(); nameLabel.Text="Name"; nameLabel.Top=50; nameLabel.Left=0; f.Controls.Add(nameLabel); TextBox nameTextBox = new TextBox(); nameTextBox.Top=50; nameTextBox.Left=100; nameTextBox.Text = "Rob"; f.Controls.Add(nameTextBox); f.ShowDialog(); } } I've fiddled slightly with the position of the label and given it a more sensible name. I've also set the name text we are editing to be Rob, just to show how the components work. If you run this program you get a form as follows: This is not particularly flashy, but it is not bad for 25 or so lines of code. It also lets you change the text in the name for whatever you want. But at the moment we have no way of signalling when the edit has been finished. For that we need a button which we can press to cause an event. The Button Component What we want is a button that the user can press when they have finished editing the name. This will trigger my program to store the updated name and close the form down. You have pressed buttons like these thousands of times when you have used programs. Now we are going to find out how to make one work. A Button is just like any other component. I can place it on the form and manage its position just like any other:
A Graphical User Interface Events and Delegates
C# Programming © Rob Miles 2009 156 using System.Windows.Forms; using System.Drawing; class FormsDemo { public static void Main() { Form f = new Form(); Label nameLabel = new Label(); nameLabel.Text="Name"; nameLabel.Top=50; nameLabel.Left=0; f.Controls.Add(nameLabel); TextBox nameTextBox = new TextBox(); nameTextBox.Top=50; nameTextBox.Left=100; nameTextBox.Text = "Rob"; f.Controls.Add(nameTextBox); Button finishButton = new Button(); finishButton.Top=80; finishButton.Left=100; finishButton.Text="Finished"; f.Controls.Add(finishButton); f.ShowDialog(); } } This gives me a button on the form which I can press: However at the moment nothing happens when the button goes down. To get this to work we have to bind a method in our program to the event which is generated when the button is pressed. The windows forms system uses delegates to manage this. Events and Delegates Events are things that happen. (well, duh). Up until now our programs have run from beginning to end. When the program wants something from the user it waits patiently until that information is supplied (usually by means of a call of the ReadLine method). In the early days of computers this is how they were all used. At any given instant the program was either running through code or waiting for input. Nowadays program use is quite different. Users expect to interact with items on a screen by pressing "buttons" and triggering different actions inside the program. This means that they way our programs work has to change. Rather than waiting for the user to do something our programs must respond when an event is generated. The upshot of this is that the programming language must provide some means by which events can be managed.
A Graphical User Interface Events and Delegates
C# Programming © Rob Miles 2009 157
Events and method calls In C# an event is delivered to an object by means of a call to a method in that object. In this respect you can regard an event and a message as the same thing. From the point of view of our name editing form we would like to have a particular method called when the "Finished" button is pressed by the user. This method would validate the new name, store it if it was OK and then close down the edit form. Button Events To get back to the problem we are solving; when the user clicks on the button on our form this is registered by the Windows operating system and then passed into the form as an event. The form decides which of the components on the form should be given the event and calls a method in that component to tell it "you've been pressed". The button then does its animation so that it moves in and out. Then it looks for people to tell about the event. The button keeps a list of people to tell about events. The list is actually a list of delegates. So, to get a button to run a method of ours we need to create a delegate object and then pass that to the button so that it knows to use it when the event occurs. A delegate is an object which can be used to represent a particular method in an instance of a class. In the case of our button, the delegate is going to represent the method that we want to have called when the button is pressed. We pass the button a reference to this delegate and it can then call the method it represents when the button is pressed. The good news is that creating a delegate instance for a windows component is such a common task that the forms library has provided a delegate class which does this for us. We just need to create an instance of this class to get a delegate to give to the button. The signature of the method that is called when the event occurs is the same for every kind of event, from mouse movement, to button press, to window closing, so we can use this class every time we need to create a delegate. The actual code to create a delegate and assign it to a method is as follows: using System.Windows.Forms; using System.Drawing; using System; class FormsDemo { public static void Main() { Form f = new Form(); Label nameLabel = new Label(); nameLabel.Text="Name"; nameLabel.Top=50; nameLabel.Left=0; f.Controls.Add(nameLabel); TextBox nameTextBox = new TextBox(); nameTextBox.Top=50; nameTextBox.Left=100; nameTextBox.Text = "Rob"; f.Controls.Add(nameTextBox); Button finishButton = new Button(); finishButton.Top=80; finishButton.Left=100; finishButton.Text="Finished"; finishButton.Click += new EventHandler(finishButton_Click); f.Controls.Add(finishButton); f.ShowDialog();
A Graphical User Interface An Account Edit Form
C# Programming © Rob Miles 2009 158
} private static void finishButton_Click( object sender, EventArgs e) { Console.WriteLine ("Finish Pressed"); } } The highlighted code is the bit that ties a delegate to the click event. The EventHandler delegate class is in the System namespace and can refer to methods which are void and accept two parameters, a reference to the object which caused the event and a reference to an EventArgs instance which contains details about the event which occurred. In the code above I have an event handler method called finishButton_Click which accepts these parameters (but doesn't do anything with them). Instead it prints out a message each time the button is pressed. If you compile the above program and run it you will find that each time you press the Finish button the program prints out a message. In the completed editor this method will finish the edit off for us. Note that we don’t actually have to use the parameters, often our methods will ignore the values supplied. However, sometimes, for example when we are capturing mouse movement events, we might want to use them to provide information such as the mouse coordinates. An Account Edit Form My example code above is OK for showing how the forms work and components are added to them, but it is not production code. This is because I have made everything by hand and there is no edit object as such. If you remember our text editing code you will recall that we had an object which did the editing for us. We passed it a reference to our account and it managed the edit process, returning when the edit was complete. To make a proper account editor we need to create a class which will do this job for us. This will be used in almost exactly the same way as the text editor. Extending the Windows Form class It turns out that the best way to create a class to do this job is to extend the Form class to make a new form of our own. This is a standard technique for using windows components. The idea is that when the form is created the constructor in the form makes all the components and adds them to the form in the appropriate places. Our form can then be regarded as a customised version of an empty form. And the way that you create customised versions of classes is to extend them.
A Graphical User Interface An Account Edit Form
C# Programming © Rob Miles 2009 159
The form will be passed a reference to the account instance which is being edited. It then gets the properties out of the form and displays them for editing. When the user presses the finish button the form must make sure that the name is valid. If it is the name of the account class should be set and the form must then dispose of itself. This code is the windows equivalent of the AccountEditTextUI method that we created previously. All the form components are created in the constructor for the form. The finishButton_Click method gets the name out of the text box and validates it. If the name is invalid it uses a static method in the windows forms system to pop up a message box and report an error: using System; using System.Windows.Forms; public class AccountEditForm : System.Windows.Forms.Form { private Label nameLabel; private TextBox nameTextBox; private Button finishButton; IAccount account; public AccountEditForm (IAccount inAccount) { this.account = inAccount; this.nameLabel = new Label(); this.nameLabel.Text="Name"; this.nameLabel.Top=50; this.nameLabel.Left=0; this.Controls.Add(this.nameLabel); this.nameTextBox = new TextBox(); this.nameTextBox.Top=50; this.nameTextBox.Left=100; this.nameTextBox.Text = this.account.GetName(); this.Controls.Add(this.nameTextBox); this.finishButton = new Button(); this.finishButton.Top=80; this.finishButton.Left=100; this.finishButton.Text="Finished"; this.finishButton.Click += new System.EventHandler(finishButton_Click); this.Controls.Add(this.finishButton); } private void finishButton_Click(object sender, System.EventArgs e) { string reply = account.ValidateName(nameTextBox.Text); if ( reply.Length > 0 ) { System.Windows.Forms.MessageBox.Show(reply) ; return; } this.account.SetName( nameTextBox.Text) ; this.Dispose(); } }
A Graphical User Interface An Account Edit Form
C# Programming © Rob Miles 2009 160
This is how we tell the user that the name is not correct. There are a number of different forms of this Show method which you can use to get different forms of message box and even add extra buttons to it. Disposing of forms The Dispose method is used when we have finished with this form and we want it to get rid of it. All the components on the form are destroyed and the form is removed from the screen. Once we have disposed of a form we can never use it again. We will need to create a new form instead. The Dispose method is important because we must explicitly say when we have finished with the instance. If we just removed a reference to the form object it will still remain in memory until the garbage collector gets around to noticing it. Using the Edit form To use the edit form we must first construct an account instance. We then pass a reference to the account into the constructor of an AccountEditForm. Account a = new Account(); a.SetName("Rob"); AccountEditForm edit = new AccountEditForm (a); edit.ShowDialog(); Console.WriteLine ( "Name value : " + a.GetName()); This piece of test code creates an account and sets the name of the account holder to Rob. It then creates an edit form and uses that to edit the name value in the account. Modal Editing The call of ShowDialog in the edit form is modal. This means that while the form is on the screen the rest of the system is paused. In the code above the WriteLine is not performed until after the edit form has been closed. Visual Studio and Form Editing The Visual Studio application can take care of all the hard work of creating forms and adding components to them. It will also look after the creation of delegates for button actions. However, it is important to remember that although it automates a lot of the actions that I have performed by hand above, the fundamental principles that drive the forms it produces are exactly the same.
Using Delegates Type safe delegates
C# Programming © Rob Miles 2009 161
Programmer’s Point:Customers really care about the user interface If there is one part of the system which the customer is guaranteed to have strong opinions about it is the user interface. The design of this should start at the very beginning of the product and be refined as it goes. Never, ever assume you know that the user interface should work in a particular way. I have had to spend more time re-working user interface code than just about any other part of the system. The good news is that with something like Visual Studio it is very easy to produce quite realistic looking prototypes of the front end of a system. These can then be shown to the customer (get them signed off even) to establish that you are doing the right thing. Using Delegates Events and delegates are a very important part of C#. Therefore you should read this text carefully and make sure you understand what is going on. Delegates are useful because they let us manipulate references to methods. We can manage which particular method is going to be called in a given situation in terms of a lump of data which we can move around. Delegates are an important part of how events are managed in a C# program. Events are things that happen which our program may need to respond to. They include stuff like people pressing buttons in our user interface, clocks going tick and messages arriving via the network. In each case we need to tell the system what to do when the event occurs. The way that C# does this is by allowing us to create instances of delegate classes which we give the event generators. When the event occurs (this is sometimes called the event "firing") the method referred to by the event is called to deliver the message. I call a delegate "a way of telling a piece of program what to do when something happens". A posh description would have the form: A delegate is a type safe reference to a method in a class. Type safe delegates The phrase type safe in this context means that if the method accepts two integer parameters and returns a string, the delegate for that method will have exactly the same appearance and cannot be used in any other way. This word is used to distinguish a delegate from things like pointers which are used in more primitive languages like C. In C you can create pointers to methods, but the C environment does not know (or even care) what the methods really look like. This means that you can call them in the wrong way and cause your program to explode. Don’t worry about this too much. Just remember that delegates are safe to use. Using a Delegate As an example, consider the calculation of fees in our bank. The bank will have a number of different methods which do this, depending on the type of customer and the
Using Delegates Type safe delegates
C# Programming © Rob Miles 2009 162 status of that customer. It might want to have a way in which a program can choose which fee calculation method to use as it runs. We have seen that things like overriding let us create methods which are specific to a particular type of object, for example we provided a custom WithdrawFunds for the BabyAccount class which only lets us draw out a limited amount of cash. These techniques are very useful, but they are hard wired into the code that I write. Once I've compiled the class the methods in it cannot change. A delegate is a "stand in" for a method. If you call the delegate it calls the method it presently refers to. This means I can use it as a kind of method selector. A delegate type is created like this: public delegate decimal CalculateFee (decimal balance); Note that I've not created any delegates yet, I've just told the compiler what the delegate type CalculateFee looks like. This delegate can stand in for a method which accepts a single decimal parameter (the balance on the account) and returns a decimal value (the amount we are going to charge the customer). An example of a method we might want to use with this delegate you could consider this one: public decimal RipoffFee (decimal balance) { if ( balance < 0 ) { return 100; } else { return 1; } } This is a rather evil fee calculator. If you are overdrawn the fee is 100 pounds. If you are in credit the fee is 1 pound. If I want to use this in my program I can make an instance of CalculateFee which refers to it: CalculateFee calc = new CalculateFee (RipoffFee); Now I can "call" the delegate and it will actually run the ripoff calculator method: fees = calc(100); The calc delegate presently refers to a delegate instance which will use the RipoffFee method. I can change that by making another delegate: calc = new CalculateFee (FriendlyFee); Now when I "call" calc it will run the FriendlyFee method. This of course only works if FriendlyFee is a method which returns a value of type decimal and accepts a single decimal value as a parameter. An instance of a delegate is an object like any other. This means that it can be managed in terms of references, so I can build structures which contain delegates and I can also pass delegates in and out of methods. You can regard a list of delegates as a list of methods that I can call. This gives us another layer of abstraction and means that we can now design programs which can have behaviours which change as the program runs. For now however, it is best just to consider them in terms of how we use delegates to manage the response of a program to events.
Structured Error Handling The Exception class
C# Programming © Rob Miles 2009 163
Programmer’s Point:Delegates are strong magic Delegates provide a very useful facility, of making programs able to change what they do as they run. There are situations when this can be very useful. They are also a major part of how C# programs interact with the user. But I don't use them a great deal in my programs outside of this and it is not that likely you will either. They are a bit like that strange spanner in your toolbox which you only use once in a while, but when you do it is the only one that fits. So use them sparingly and make sure that they are the only way of solving the problem when you do use them. Structured Error Handling By now I hope that you are starting to think very hard about how programs fail. You should also be thinking that when you build a system you should consider how you are going to manage the way that it will fail. This is actually a very important part of the design process. When something bad happens the program must deal with this in a managed way. The key to achieving this is to think about making your own custom exceptions for your system. We have been on the receiving end of exceptions already. We have seen that if something bad happens whilst a file is being read, or a Parse method is given an invalid string, the system will throw an exception to indicate that it is unhappy. This means that potentially badly behaved code like this has to be enclosed in a try – catch construction so that our program can respond sensibly. Now we are going to take a closer look at exceptions and see about creating our own exception types. The Exception class The C# System namespace holds a large number of different exceptions, but they are all based on the parent Exception class. If you want to throw your own exceptions you are strongly advised to create your own exception type which extends the system one. You can generate System.Exception when something goes wrong, but this means that exceptions produced by your code will get mixed up with those produced by other parts of the system. If you want your code to be able to explicitly handle your errors the best way forward is to create one or more of your own exceptions. This means that, along with everything else in your system, you will need to design how your program will handle and generate errors. This all (of course) leads back to the metadata which you have gathered, in that the specification will give you information about how things can fail and the way that the errors are produced. Creating your own exception type Creating your exception type is very easy. It can be done by simply extending the System.Exception class: public class BankException : System.Exception { } This works because the System.Exception class has a default constructor which takes no parameters. The default constructor in BankException (which is added automatically by the compiler), can just use this to make an Exception instance.
Structured Error Handling Throwing an Exception
C# Programming © Rob Miles 2009 164
However, there is a version of the Exception constructor which lets us add a message to the exception. This can be picked up and used to discover what has gone wrong. To create a standard exception with a message I pass the constructor a string. If I want to use this with my bank exception I have to sort out the constructor chaining for my exception class and write code as follows: public class BankException : System.Exception { public BankException (string message) : base (message) { } } This makes use of the base keyword to call the constructor of the parent class and pass it the string message. Throwing an Exception The throw keyword throws an exception at that point in the code. The thing that is thrown must be based on the System.Exception class. For example, I might want to throw an exception if the name of my account holder is an empty string. I can do this with the code: if ( inName.Length == 0 ) { throw new BankException("Invalid Name"); } The throw keyword is followed by a reference to the exception to be thrown. In the code above I make a new instance of the bank exception and then throw that. At this point the execution would transfer to the “nearest” catch construction. This might be a catch of mine, or it might be one supplied by the system. If the exception is caught by the system it means that my program will be terminated. However, I can catch the exception myself as follows: Account a; try { a = new Account(newName, newAddress); } catch (BankException exception) { Console.WriteLine("Error : " + exception.Message); } The code tries to create a new account. If doing this causes an exception to be thrown, the code in the exception handler is obeyed. The reference exception is set to refer to the exception which has been thrown. The Message member of an exception is the text which was given. This means that if I try to create an account with an empty name the exception will be thrown, the catch invoked, and the message printed.
Structured Error Handling Multiple Exception Types
C# Programming © Rob Miles 2009 165
Programmer’s Point:Design your error exceptions yourself An exception is an object which describes how things have gone wrong. It can contain a text message which you can display to explain the problem to the user. However, you should seriously consider extending the exception class to make error exceptions of your own which are even more informative. Errors should be numbered, i.e. your exceptions should be tagged with an error number. This helps a great deal in working with different languages. If the customer can say “Error number 25” when they are reporting a problem it makes it much easier for the support person to respond sensibly. Note that, as with just about everything else, you need to design in your handling of errors. Multiple Exception Types It is worth spending time thinking about how the exceptions and errors in your system are to be managed. We can have many catch constructions if we like, and the catch will be matched up to the type of exception that was thrown: public class BankExceptionBadName : System.Exception { public BankExceptionBadName (string message) : base (message) { } } public class BankExceptionBadAddress : System.Exception { public BankExceptionBadAddress (string message) : base (message) { } } Now I can use different catches, depending on how the code fails: Account a; try { a = new Account("Rob", ""); } catch (BankExceptionBadName nameException) { Console.WriteLine("Invalid name : " + nameException.Message); } catch (BankExceptionBadAddress addrException) { Console.WriteLine("Invalid address : " + addrException.Message); } catch (System.Exception exception ) { Console.WriteLine("System exception : " + exception.Message); } Each of the catches matches a different type of exception. At the very end of the list of handlers I have one which catches the system exception. This will be called if the exception is not a name or an address one.
Program Organisation Using Separate Source Files
C# Programming © Rob Miles 2009 166
Programmer’s Point:Programs often fail in the error handlers If you think about it, error handlers are rather hard to test. They only get run when something bad happens, and most of the time you will be using test data which assumes everything is OK. This means that errors are more likely to get left in the error handlers themselves, since the code doesn’t get exercised as much as the rest of the system. Of course this is a recipe for really big disasters, in that the error handler is supposed to put things right and if it fails it will usually make a bad situation much worse. As a professional programmer you must make sure that your error handling code is tested at least as hard as the rest of the system. This might mean that you have to create special test versions of the system to force errors into the code. Believe me, it is worth the effort! Error handling should be something you design in. When you create the system you decide how many and what kind of errors you are going to have to manage. Program Organisation At the moment we have put the entire program source that we have created into a single file, which we compile and run. This is fine for teeny tiny projects, but now we are starting to write much larger programs and we need a better way to organise things. This is especially important when you consider that a given project may have many people working on it. To do this we have to solve two problems:  how we physically spread the code that we write around a number of files  how we logically identify the items in our program. The two problems are distinct and separate and C# provides mechanisms for both. In this section we are going to see how a large program can be broken down into a number of different chunks. Using Separate Source Files In a large system a programmer will want to spread the program over several different source files. When you design your solution to a problem you need to decide where all the files live. In our bank management program we have identified a need for a class to keep track of a particular account. The class will be called Account. Consider a really simple Account class:
Program Organisation Using Separate Source Files
C# Programming © Rob Miles 2009 167 public class Account { private decimal balance = 0; public void PayInFunds ( decimal amount ) { balance = balance + amount; } public decimal GetBalance () { return balance; } public bool WithDrawFunds ( decimal amount ) { if ( amount < 0 ) { return false ; } if ( balance >= amount ) { balance = balance - amount ; return true; } else { return false ; } } } This is a fairly well behaved class in that it won't let us withdraw more money than we have in the account. We could put it into a file called "Account.cs" if we wanted to. However, we might want to create lots of other classes which will deal with bank accounts. So instead I have decided to put the class into a file called "AccountManagement.cs".As I add more account management The problem is that the compiler now gets upset when I try to compile the file: error CS5001: AccountManagement.exe' does not have an entrypoint defined The compiler is expecting to produce an executable program. These have an entry point in the form of the Main method. Our bank account class does not have a main method because the program will never start by actually running an account. Instead other programs will run and create accounts when they need them. So, the compiler cannot make an executable file, since it does not know where the program should start. Note that I have made the Account class public. This is so that classes in other files can make use of it. You can apply the protection levels to classes in the same way that you can protect class members. Generally speaking your classes will be public if you want them to be used in libraries. Creating a Library I solve this problem by asking the compiler to produce a library instead. I use the target option to the compile command. Options are a way of modifying what a command does. The compiler can tell that it is being given an option because options always start with a slash character: csc /target:library AccountManagement.cs The compiler will not now look for a Main method, because it has been told to produce a library rather than a program. If I look at what has been created I find that the compiler has not made me an executable, instead it has made me a library file: AccountManagement.dll The language extension dll stands for dynamic link library. This means that the content of this file will be loaded dynamically as the program runs.
Program Organisation Using Separate Source Files
C# Programming © Rob Miles 2009 168
Using a Library Now I have a library I next have to work out how to use it. Firstly I'm going to create another source file called AccountTest.cs. This contains a Main method which will use the Account class: using System; class AccountTest { public static void Main () { Account test = new Account(); test.PayInFunds (50); Console.WriteLine ("Balance:" + test.GetBalance()); } } This makes a new account, puts 50 pounds in it and then prints out the balance. If I try to compile it I get a whole bunch of errors: AccountTest.cs(5,3): error CS0246: The type or namespace name 'Account' could not be found (are you missing a using directive or an assembly reference?) AccountTest.cs(6,3): error CS0246: The type or namespace name 'test' could not be found (are you missing a using directive or an assembly reference?) AccountTest.cs(7,37): error CS0246: The type or namespace name 'test' could not be found (are you missing a using directive or an assembly reference?) The problem is that the compiler does not know to go and look in the file AccountManagement.cs to find the Account class. This means that it fails to create test, which causes further errors. To solve the problem I need to tell the compiler to refer to AccountManagement to find the Account class: csc /reference:AccountManagement.dll AccountTest.cs The reference option is followed by a list of library files which are to be used. In this case there is just the one file to look at, which is the library that contains the required class. The compiler now knows where to find all the parts of the application, and so it can build the executable program. Library References at Runtime We have now made two files which contain program code: AccountManagement.dll the library containing the Account class code AccountTest.exe the executable program that creates an Account instance Both these files need to be present for the program to work correctly. This because of the "dynamic" in dynamic link library. It means that library is only loaded when the program runs, not when it is built. Deleting System Components This means that if I do something horrid like delete the Acccountmanagement.dll file and then run the program this causes all kinds of nasty things to happen:
Program Organisation Namespaces
C# Programming © Rob Miles 2009 169
Unhandled Exception: System.IO.FileNotFoundException: File or assembly name AccountManagement, or one of its dependencies, was not found. File name: "AccountManagement" at AccountTest.Main() … lots of other stuff This means that we need to be careful when we send out a program and make sure that all the components files are present when the program runs. Updating System Components Creating a system out of a number of executable components has the advantage that we can update part of it without affecting everything else. If I modify the AccountManagement class and re-compile it, the new version is picked up by AccountTest automatically. Of course this only works as long as I don't change the appearance of the classes or methods which AccountTest uses. The good news is that I can fix the broken parts of the program without sending out an entire new version. The bad news is that this hardly ever works. There is a special phrase, "dll hell", reserved for what happens. Unless the fixed code is exactly right there is a good chance that it might break some other part of the program. Windows itself works in this way, and the number of times that I've installed a new program (or worse yet an upgrade of an existing one) which has broken another program on the computer is too numerous to happily remember. Programmer’s Point:Use Version Control and Change Management So many things end up being rooted in a need for good planning and management. And here we are again. When you think about selling your application for money you must make sure that you have a managed approach to how you are going to send out upgrades and fixes. The good news is that there are ways of making sure that certain versions of your program only work with particular program files. The bad news is that you have to plan how to use this technology, and then make sure you use it. If this sounds boring and pedantic then I'm very sorry, but if you don't do this you will either go mad or bankrupt. Or both. Namespaces We can use library files to break up our solution into a number of files. This makes management of the solution slightly easier. But we also have another problem. We don't just want to break things into physical chunks. We also want to use logical ones as well. If you are not sure what I mean by this, consider the situation in our bank. We have decided that Account is a sensible name for the class which holds all the details of a customer account. But if you consider the whole of the bank operations you find that the word "account" crops up all over the place. The bank will buy things like paper clips, rubber stamps, little pens on chains (pre-supplied with no ink in of course) and the like from suppliers. You could say that the bank has an account with such a supplier. It may well wish to keep track of these accounts using a computer system. Perhaps the programmers might decide that a sensible name for such a thing would be Account. Arrgh! We are now heading for real problems. If the two systems ever meet up we can expect a digital fight to the death about what "Account" really means. Which would be bad.
Program Organisation Namespaces
C# Programming © Rob Miles 2009 170
We could solve the problem by renaming our account class CustomerBankAccount. But this would be messy, and mean that at design time we have to make sure that we name all our classes in a way which will always be unique. A far better way would be to say that we have a CustomerBanking namespace in which the word Account has a particular meaning. We can also have an EquipmentSupplier namespace as well. This prevents the two names from clashing, in that they are not defined in the same namespace. Putting a Class in a Namespace Up until now every name we have used has been created in what is called the global namespace. This is because we have not explicitly set up a namespace in our source files. However, they are very easy to set up: namespace CustomerBanking { public class Account { private decimal balance = 0; public void PayInFunds ( decimal amount ) { balance = balance + amount; } public decimal GetBalance () { return balance; } public bool WithDrawFunds ( decimal amount ) { if ( amount < 0 ) { return false ; } if ( balance >= amount ) { balance = balance - amount ; return true; } else { return false ; } } } } I have used the namespace keyword to identify the namespace. This is followed by a block of classes. Every class declared in this block is regarded as part of the given namespace, in this case CustomerBanking. A given source file can contain as many namespace definitions and each can contain as many classes as you like. Using a Class from a Namespace A Global class (i.e. one created outside any namespace) can just be referred to by its name. If you want to use a class from a namespace you have to give the namespace as well. CustomerBanking.Account test; This creates a variable which can refer to instances of the Account class. The Account class we use is the one in the CustomerBanking namespace. A name like this, with the namespace in front, is known as a fully qualified name. If we want to create an instance of the class we use the fully qualified name again: test = new CustomerBanking.Account(); If I want to use the Account class from the CustomerBanking namespace I have to modify my test class accordingly.
Program Organisation Namespaces
C# Programming © Rob Miles 2009 171
Using a namespace If you are using a lot of things from a particular namespace C# provides a way in which you can tell the compiler to look in that namespace whenever it has to resolve the name of a particular item. We do this with the using keyword: using CustomerBanking ; When the compiler sees a line like: Account RobsAccount; - it automatically looks in the CustomerBanking namespace to see if there is a class called Account. If there is it uses that. We have already used this technique a lot. The System namespace is where a lot of the library components are located. We can use these by means of fully qualified names: System.Console.WriteLine ( "Hello World"); However, it is common for most programs to have the line: using System; - at the very top. This means that the programmer can just write: Console.WriteLine ("Hello World"); The compiler goes "ah, I'll go and have a look for a thing called Console in all the namespaces that I've been told to use". If it finds one, and only one, Console then all is well and it uses that. If it finds two Console items (if I was an idiot I could put a Console class in my CustomerBanking namespace I suppose) it will complain that it doesn't know which to use. Nesting Namespaces You can put one namespace inside another. This allows you to break things down into smaller chunks. The System namespace is like this, there is a namespace which is part of the System namespace which is specifically concerned with Input/Output. You get to use the items in the System.IO namespace with an appropriate include: using System.IO ; In terms of declaring the namespace you do it like this: namespace CustomerBanking { namespace Accounts { // account classes go here } namespace Statements { // statement classes go here } namespace RudeLetters { // rude letter classes go here } } Now I can use the classes as required: using CustomerBanking.RudeLetters ; Of course the namespaces that you use should always be carefully designed. But then again, you'd probably figured that one out already.
Debugging Namespaces in Separate Files
C# Programming © Rob Miles 2009 172
Namespaces in Separate Files There is no rule that says you have to put all the classes from a particular namespace in a particular file. It is perfectly OK to spread the classes around a number of different source files. You have to make sure that the files you want to use contain all the bits are needed, and this means of course more planning and organising. Programmer’s Point:Fully Qualified Names are Good There are two ways you can get hold of something. You can spell out the complete location by using a Fully Qualified Name (CustomerBanking.RudeLetters.OverdraftWarning) or you can get hold a items in a namespace with using. Of the two I much prefer the fully qualified name. I know that this makes the programs slightly harder to write, but it means that when I'm reading the code I can see exactly where a given resource has come from. If I just see the name OverdraftWarning in the code I have no idea where that came from and so I have to search through all the namespaces that I'm using to find it. Debugging Some people are born to debug. Not everyone is good at debugging, some will always be better than others. Having said that there are techniques which you can use to ease the process, and we are going to explore some of these here. The good news is that if you use a test driven approach to your development the number of faults that are found by the users should be as small as possible, but there will still be some things that need to be fixed. Incidentally, the reason why problems with programs are called bugs is that the original one was caused by an actual insect which got stuck in some contacts in the computer, causing it to fail. This is not however how must bugs are caused. It is very rarely that you will see your program fail because the hardware is faulty, I've been programming for many years and only seen this in a handful of occasions. The sad thing is that most of the bugs in programs have been put there by programmers. In other words, debugging is working very hard to find out how stupid you were in the first place. Fault Reporting We have already seen that a fault is something which the user sees as a result of an error in your program. Faults are uncovered by the testing process or by users. If a program fails as part of a test, the steps taken to manifest it will be well recorded. However, if a user reports a fault the evidence may bell be anecdotal, i.e. you will not be supplied with a sequence of steps which cause the fault to appear, you will simply be told "There's a bug in the print routine". There is a strong argument for ignoring a fault report if you have not been given a sequence of steps to follow to make it happen. However, this approach will not make you popular with users. It is important to stress to users that any fault report will only be taken seriously if it is well documented.
Debugging Bugswatting
C# Programming © Rob Miles 2009 173
Programmer’s Point:Design Your Fault Reporting Process Like just about everything else I've ever mentioned, the way in which you manage your fault reports should be considered at the start of the project. In other words, you should set up a process to deal with faults that are reported. In a large scale development fault reports are managed, assigned to programmers and tracked very carefully. The number of faults that are reported, and the time taken to deal with them, is valuable information about the quality of the thing that you are making. Also, if you formalize (or perhaps even automate) the fault reporting process you can ensure that you get the maximum possible information about the problem. The two types of Fault Faults split into two kinds, those which always happen and those which sometimes happen. Faults which always happen are easy, you can perform the sequence which always causes the bug to manifest itself and then use suitable techniques to nail it (see later). Faults which sometimes happen are a pain. What this means is that you do not have a definite sequence of events which causes the system to fail. This does not mean that there is no sequence (unless you are suffering from a hardware induced transient of some kind – which is rather rare) but that you have not found the sequence yet. An example would be a print function which sometimes crashes and works at other times. You might track this down to the number of pages printed, or the amount of text on the page, or the size of the document which is being edited when the print is requested. The manifestation of a fault may be after the error itself has actually occurred, for example a program may fail when an item is removed from a database, but the error may be in the routine which stored the item, or in code which overwrote the memory where the database lives. A fault may change or disappear when the program itself is changed; errors which overwrite memory will corrupt different parts of the program if the layout of the code changes. This can lead to the most annoying kind of fault, where you put in extra print statements to find out more about the problem, and the problem promptly disappears! If you suspect such an error, your first test is to change the code and data layout in some way and then re-run the program. If the fault changes in nature this indicates problems with program or data being corrupted. Bugswatting You can split faults into other categories, where the program crashes (i.e. stops completely) or when it does the wrong thing. Surprisingly, crashes are often easier to fix. They usually point to:  a state which is not catered for (make sure that all selection statements have a default handler which does something sensible and that you use defensive programming techniques when values are passed between modules)  programs that get stuck into loops, do – while constructions which never fail, for loops which contain code which changes the control variable, methods that call themselves by mistake and recurse their way into stack overflow  an exception that is not caught properly
Debugging Bugswatting
C# Programming © Rob Miles 2009 174
If your program does the wrong thing, this can be harder to find. Look for:  use of un-initialised members of classes  typographical errors (look for incorrectly spelt variable names, incorrect comparison operators, improperly terminated comments)  logical errors (look for faults in the sequence of instructions, invalid loop termination's, wrongly constructed logical conditions) As I said above, some folks are just plain good at finding bugs. Here are some tips: 1. Don't make any assumptions. If you assume that "the only way it could get here is through this sequence" or "there is no way that this piece of code could be obeyed" you will often be wrong. Rather than make assumptions, add extra code to prove that what you think is happening is really happening. 2. Explain the problem to someone else - even if it is just the cat! The act of explaining the problem can often lead you to deduce the answer. It is best if the person you are talking to is highly sceptical of your statements. 3. Look at all possible (if seemingly unrelated) factors in the manifestation of the bug. This is particularly important if the bug is intermittent. If the bug appears on Friday afternoons on your UNIX system, find out if another department uses the machine to do a payroll run at that time and fills up all the scratch space, or the loading department turn on the big hoist and inject loads of noise into the mains. 4. Leave the problem alone for a while. Go off and do something different and you may find that the answer will just appear. Alternatively you may find the answer as soon as you come back to the problem. 5. Remember that although the bug is of course impossible, it is happening. This means that either the impossible is happening, or one of your assumptions that it is impossible is wrong! 6. Can you get back to a state where the bug was not present, and then look at the changes made since? If the system is failing as a result of a change or, heaven forbid, a bug fix, try to move back to a point where the bug is not there, and then introduce the changes until the bug appears. Alternatively, look carefully at how the introduction of the feature affects other modules in the system. A good Source Code Control System is very valuable here, in that it can tell you exactly what changes have been made from one version to the next. One thing that I should make clear at this point is that the process of debugging is that of fixing faults in a solution which should work. In other words you must know how the program is supposed to work before you try and fix problems with what it actually does. I have been nearly moved to tears by the sight of people putting in another loop or changing the way their conditions to "see if this will make the program work". Such efforts are always doomed, just like throwing a bunch of electrical components at the wall and expecting a DVD player to land on the floor is also not going to work. Rip it up and start again In some projects it is possible that the effort involved in starting again is less than trying to find out what is wrong with a broken solution that you have created. If you have taken some time off from debugging, explained the code to a friend and checked all your assumptions then maybe, just maybe this might be the best way forward.
The End? Making Perfect Software
C# Programming © Rob Miles 2009 175
Programmer’s Point:Bug Fixes Cause Bugs The primary cause of bugs is probably the bug fixing process. This is because when people change the program to make one bit of it work the change that they make often breaks other features of the system. I have found statistics which indicate that "two for one" is frequently to be expected, in that every bug fix will introduce two brand new bugs. The only way round this is to make sure that your test process (which you created as a series of lots of unit tests) can be run automatically after you've applied the fix. This at least makes sure that the fix has not broken anything important. Making Perfect Software There is no such thing as perfect software. One of the rules by which I work is that "any useful program will have bugs in it". In other words I can write programs that I can guarantee will contain no bugs. However, such programs will be very small and therefore not be good for much. As soon as I create a useful program, with inputs, outputs and some behaviours, I start introducing bugs. This does not mean that every program that I write is useless, just that it will not be perfect. When considering faults you must also consider their impact. Part of the job of a project manager in a development is deciding when a product is good enough to sell, and whether or not a fault in the code is a "stopper" or not. A stopper is a fault which makes the program un-saleable. If the program crashes every third time you run it, or sometimes destroys the filestore of the host computer, this is probably the behaviour of a stopper bug. But if it does something like always output the first page twice if you do a print using the Chinese font and a certain kind of laser printer this might be regarded as a problem most users could live with. This means that you need to evaluate the impact of the faults that get reported to you, prioritise them and manage how they are dealt with. You also need to be aware of the context of the development. For example, a fault in a video game is much less of a problem than one in an air traffic control system. The key to making software that is as perfect as possible is to make sure that you have a good understanding of the problem that you are solving, that you know how to solve it before you start writing code and that you manage your code production process carefully. Read some of the recommended texts at the end of this document for more on this aspect of programming. The End? This is not all you need to know to be a programmer. It is not even all you need to know to be a C# programmer. However, it is quite a good start, but there are quite a few things missing from this text, because we don't have time to teach them all. You should take a look at the following things if you want to become a great C# programmer:  serialisation  attributes  reflection  networking
The End? Continuous Development
C# Programming © Rob Miles 2009 176
Continuous Development A good programmer has a deliberate policy of constantly reviewing their expertise and looking at new things. If you are serious about this business you should be reading at least one book about the subject at any one time. I have been programming for as long as I can remember but I have never stopped learning about the subject. And I've never stopped programming, reading books about programming and looking at other people's code. Further Reading Code Complete Second Edition: Steve McConnell Published by Microsoft: ISBN 0-7356-1967-0 Not actually a book about C#. More a book about everything else. It covers a range of software engineering and programming techniques from the perspective of "software construction". If you have any serious intention to be a proper programmer you should/must read/own this book. How to be a programmer This web site is also worth a read, as it covers the behaviours of a programmer very well indeed: http://samizdat.mines.edu/howto/HowToBeAProgrammer.html
Glossary of Terms Abstract
C# Programming © Rob Miles 2009 177
Glossary of Terms Abstract Something which is abstract does not have a "proper" existence as such. When writing programs we use the word to mean "an idealised description of something". In the case of component design an abstract class contains descriptions of things which need to be present, but it does not say how they are to be realised. In C# terms a class is abstract if it is marked as such, or if it contains one or more method which is marked as abstract. You can't make an instance of an abstract class, but you can use it as the basis of, or template for, a concrete one. For example, we may decide that we need many different kinds of receipt in our transaction processing system: cash receipt, cheque receipt, wholesaler receipt etc. We don't know how each particular receipt will work inside, but we do know those behaviours which it must have to make it into a receipt. We can therefore create an abstract Receipt class which serves as the basis of all the concrete ones. Each "real" receipt class is created by extending the parent, abstract one. This means that it is a member of the receipt family (i.e. it can be treated as a Receipt) but it works in its own way. Accessor An accessor is a method which provides access to the value managed within a class. Effectively the access is read only, in that the data is held securely in the class but code in other classes may need to have access to the value itself. An accessor is implemented as a public method which will return a value to the caller. Note that if the thing being given access to is managed by reference the programmer must make sure that it is OK for a reference to the object is passed out. If the object is not to be changed it may be necessary to make a copy of the object to return to the caller. Base base is a C# keyword which has different meanings depending on the context in which it is given. It is used in a constructor of a child class to call the constructor in the parent. It is also used in overriding methods to call the method which they have overridden. Call When you want to use a method, you call it. When a method is called the sequence of execution switches to that method, starting at the first statement in its body. When the end of the method, or the return statement, is reached the sequence of execution returns to the statement immediately following the method call. Class A class is a collection of behaviours (methods) and data (properties). It can be used to represent a real world item in your program (for example bank account). Whenever you
Glossary of Terms Code Reuse
C# Programming © Rob Miles 2009 178 need to collect a number of things into a single unit you should think in terms of creating a class. Code Reuse A developer should take steps to make sure that a given piece of program is only written once. This is usually achieved by putting code into methods and then calling them, rather than repeating the same statements at different parts of a program. The use of class hierarchies is also a way of reusing code. You only need to override the methods that you want to update. Cohesion A class has high cohesion if it is not dependent on/coupled to other classes. Collection The C# library has the idea of a collection as being a bunch of things that you want to store together, for example all the players in a football team or all the customers in a bank. One form of a collection is an array. Another is the hashtable, which allows you to easily find a particular item based on a key value in that item. A collection class will support enumeration which means that it can be asked to provide successive values to the C# foreach construction. Whenever you want to store a number of things together you should consider using a collection class to do this for you. The collection classes can be found in the System.Collections namespace. Compiler A compiler takes a source file and makes sense of it. The compiler will produce an executable file which is run. Writing compilers is a specialised business, they used to be written in assembly language but are now constructed in high level languages (like C#!). A compiler is a large program which is specially written for a particular computer and programming language. Most compilers work in several phases. The first phase, the pre-processor, takes the source which the user has written and then finds all the individual keywords, identifiers and symbols producing a stream of program source which is fed to the "parser" which ensures that the source adheres to the grammar of the programming language in use. The final phase is the code generator, which produces the executable file which is later run by the host. Component A component is a class which exposes its behaviour in the form of an interface. This means that rather than being thought of in terms of what it is (for example a BabyCustomerAccount) it is thought of in terms of what it can do (implement the IAccount interface to pay in and withdraw money). When creating a system you should focus on the components and how they interact. Their interactions are expressed in the interfaces between them.
Glossary of Terms Constructor
C# Programming © Rob Miles 2009 179
Constructor A constructor is a method in a class which is called as a new instance of that class is created. Programmer’s use constructors to get control when an instance is created and set up the values inside the class. If a class is a member of a hierarchy, and the parent class has a constructor, it is important when making the child that you ensure the parent constructor is called correctly. Otherwise the compiler will refuse to compile your program. Coupling If a class is dependent on another the two classes are said to be coupled. Generally speaking a programmer should strive to have as little coupling in their designs as possible, since it makes it harder to update the system. Coupling is often discusses alongside cohesion, in that you should aim for high cohesion and low coupling. Creative Laziness It seems to me that some aspects of laziness work well when applied to programming. Code reuse, where you try and pick up existing code, is a good example of this. Making sure the spec. is right before you do anything is another way of saving on work. Howver, structuring the design so that you can get someone else to do a lot of the work is probably the best example of creative laziness in action. Delegate A delegate is a type safe reference to a method. A delegate is created for a particular method signature (for example this method accepts two integers and returns a float). It can then be directed at a method in a class which matches that signature. Note that the delegate instance holds two items, a reference to the instance/class which contains the method and a reference to the method itself. The fact that a delegate is an object means that it can be passed around like any other. Delegates are used to inform event generators (things like buttons, timers and the like) of the method which is to be called when the event they generate takes place. Dependency In general, too much dependency in your designs is a bad thing. A dependency relationship exists between two classes when a change in code in one class means that you might have to change the other as well. It usually means that you have not properly allocated responsibility between the objects in your system and that two objects are looking after the same data. As an example see the discussion of the CustomerAccount and ChildAccount Load method on page 143. Dependency is often directional. For example a user interface class may be dependent on a business object class (if you add new properties to the business object you will need to up date the user interface). However, it is unlikely that changes to the way that the user interface works will mean that the business object needs to be altered.
Glossary of Terms Event
C# Programming © Rob Miles 2009 180
Event An event is some external occurrence which your program may need to respond to. Events include things like mouse movement, keys being hit, windows being resized, buttons being pressed, timers going tick etc. Many modern programs work on the basis of events which are connected to methods. When the event occurs the method is called to deliver notification. Windows components make use of delegates (a delegate is a type safe reference to a method) to allow event generators to be informed of the method to be called when the event takes place. Functional Design Specification Large software developments follow a particular path, from the initial meeting right up to when the product is handed over. The precise path followed depends on the nature of the job and the techniques in use at the developer; however, all developments must start with a description of what the system is to do. This is the most crucial item in the whole project, and is often called the Functional Design Specification, or FDS. Globally Unique Identifier (GUID) This is something which is created with the intention of it being unique in the world. It gives an identifier by which something can be referred to. GUID creation involves the use of random values and the date and time, amongst other things. GUIDs are used for things like account references and tags which must be unique. Most operating systems and programmer libraries provide methods which will create GUIDs. Hierarchy A hierarchy is created when a parent class is extended by a child to produce a new class with all the abilities of the parent plus new and modified behaviours specific to the requirements of the child. Extending the child produces a further level of hierarchy. The classes at the top of the hierarchy should be more general and possibly abstract (for example BankAccount) and the classes at the lower levels will be more specific (for example ChildBankAccount). Immutable An immutable object cannot be changed. If an attempt is made to change the content of an immutable object a new object is created with the changed content and the "old" one remains in memory. The string class is immutable. This gives strings a behaviour similar to value types, which makes them easier to use in programs. Inheritance Inheritance is the way in which a class extends a parent to allow it to make use of all the behaviours and properties the parent but add/customise these for a slightly different requirement. For more detail see the description of hierarchy. Interface An interface defines a set of actions. The actions are defined in terms of a number of method definitions. A class which implements an interface must contain code for each
Glossary of Terms Library
C# Programming © Rob Miles 2009 181 of the methods. A class which implements an interface can be referenced purely in terms of that interface. Interfaces make it possible to create components. We don't care precisely what the component is, as long as it implements the interface it can be thought of purely in terms of that ability. Library A library is a set of classes which are used by other programs. The difference between a library and a program is that the library file will have the extension .dll (dynamic link library) and will not contain a main method. Machine code Machine Code is the language which the processor of the computer actually understands. It contains a number of very simple operations, for example move an item from the processor into memory, or add one to an item in the processor. Each particular range of computer processors has its own specific machine code, which means that machine code written for one kind of machine cannot be easily used on another. Member A member of a class is declared within that class. It can either do something (a method) or hold some data (variable). Methods are sometimes called behaviours. Data members are sometimes called properties. Metadata Metadata is data about data. It operates at all kinds of levels. The fact that the age value is held as an integer is metadata. The fact that it cannot be negative is more metadata. Metadata must be gathered by the programmer in consultation with the customer when creating a system. Method A method is a block of code preceded by a method signature. The method has a particular name and may return a value. It may also accept a parameter to work on. Methods are used to break a large program up into a number of smaller units, each of which performs one part of the task. They are also used to allow the same piece of program to be used in lots of places in a large development. If a method is public it can be called by code other classes. A public method is how an object exposes its behaviours. A message is delivered to an object by means of a call of a method inside that object. Mutator A mutator is a method which is called to change the value of a member inside an object. The change will hopefully be managed, in that invalid values will be rejected in some way. This is implemented in the form of a public method which is supplied with a new value and may return an error code.
Glossary of Terms Namespace
C# Programming © Rob Miles 2009 182
Namespace A namespace is an area within which a particular name has a particular meaning. Namespaces let you reuse names. A programmer creating a namespace can use any name in that namespace. A fully qualified name of a resource is prefixed by the namespace in which the name exists. A namespace can contain another namespace, allowing hierarchies to be set up. Note that a namespace is purely logical in that it does not reflect where in the system the items are physically located, it just gives the names by which they are known. C# provides the using keyword to allow namespaces to be "imported" into a program. Overload A method is overloaded when one with the same name but a different set of parameters is declared in the same class. Methods are overloaded when there is more than one way of providing information for a particular action, for example a date can be set by providing day, month, year information or by a text string or by a single integer which is the number of days since 1st Jan. Three different, overloaded, methods could be provided to set the date, each with the same name. In that case the SetDate method could be said to have been overloaded. Override Sometimes you may want to make a more specialized version of an existing class. This may entail providing updated versions of methods in the class. You do this by creating a child class which extends the parent and then overriding the methods which need to be changed. When the method is called on instances of the child class, the new method is called, not the overridden one in the parent. You can use the base keyword to get access to the overridden method if you need to. Portable When applied to computer software, the more portable something is the easier it is to move it onto a different type of computer. Computers contain different kinds of processors and operating systems which can only run programs specifically written for them. A portable application is one which can be transferred to a new processor or operating system with relative ease. High Level languages tend to be portable, machine code is much harder to transfer. Private A private member of a class is only visible to code in methods inside that class. It is conventional to make data members of a class private so that they cannot be changed by code outside the class. The programmer can then provide methods or C# properties to manage the values which may be assigned to the private members. The only reason for not making a data member private is to remove the performance hit of using a method to access the data. Property A property is an item of data which is held in an object. An example of a property of a BankAccount class would be the balance of the account. Another would be the name of
Glossary of Terms Protected
C# Programming © Rob Miles 2009 183 the account holder. The C# language has a special construction to make the management of properties easy for programmers. Protected A protected member of a class is visible to methods in the class and to methods in classes which extend this class. It is kind of a half way house between private (no access to methods outside this class) and public (everyone has access). It lets you designate members in parent classes as being visible in the child classes. Public A public member of a class is visible to methods outside the class. It is conventional to make the method members of a class public so that they can be used by code in other class. A public method is how a class provides services to other classes. Reference A reference is a bit like a tag which can be attached to an instance of a class. The reference has a particular name. C# uses a reference to find its way to the instance of the class and use its methods and data. One reference can be assigned to another. If you do this the result is that there are now two tags which refer to a single object in memory. Signature A given C# method has a particular signature which allows it to be uniquely identified in a program. The signature is the name of the method and the type and order of the parameters to that method: void Silly(int a, int b) – has the signature of the name Silly and two int parameters. void Silly(float a, int b) – has the signature of the name Silly and an float parameter followed by an integer parameter. This means that the code: Silly(1, 2) ; - would call the first method, whereas: Silly(1.0f, 2) ; - would call the second. Note that the type of the method has no effect on the signature. Source file You prepare a source file with a text editor of some kind. It is text which you want to pass through a compiler to produce a program file for execution. Static In the context of C# the keyword static makes a member of a class part of a class rather than part of an instance of the class. This means that you don’t need to create an instance of a class to make use of a static member. It also means that static members are
Glossary of Terms Stream
C# Programming © Rob Miles 2009 184 accessed by means of the name of their class rather than a reference to an instance. Static members are useful for creating class members which are to be shared with all the instances, for example interest rates for all the accounts in your bank. Stream A stream is an object which represents a connection to something which is going to move data for us. The movement might be to a disk file, to a network port or even to the system console. Streams remove the need to modify a program depending on where the output is to be sent or input received from. Structure A structure is a collection of data items. It is not managed by reference, and structures are copied on assignment. Structures are also passed by value into methods. Structures are useful for holding chunks of related data in single units. They are not as flexible as objects managed by reference, but they are more efficient to use in that accessing structure items does not require a reference to be followed in the same way as for an object. Subscript This is a value which is used to identify the element in an array. It must be an integer value. Subscripts in C# always start at 0 (this locates, confusingly, the first element of the array) and extend up to the size of the array minus 1. This means that if you create a four element array you get hold of elements in the array by subscript values of 0,1,2 or 3. The best way to regard a subscript is the distance down the array you are going to move to get the element that you want. This means that the first element in the array must have a subscript value of 0. Test harness The test harness will contain simulations of those portions of the input and output which the system being tested will use. You put your program into a test harness and then the program thinks it is in the completed system. A test harness is very useful when debugging as it removes the need for the complete system (for example a trawler!) when testing. This this is a C# keyword which has different meanings depending on the context in which it is given. It is used in a constructor of a class to call another constructor. It is also used as a reference to the current instance, for use in non-static methods running inside that instance. Typesafe We have seen that C# is quite fussy about combining things that should not be combined. Try to put a float value into an int variable and the compiler will get cross at this point. The reason for this is that the designers of the language have noticed a few common programming mistakes and have designed it so that these mistakes are detected before the program runs, not afterwards when it has crashed. One of these mistakes is the use of values or items in contexts where it is either not meaningful to do
Glossary of Terms Unit test
C# Programming © Rob Miles 2009 185 this (put a string into a bool) or could result in loss of data or accuracy (put a double into a byte). This kind of fussiness is called type safety and C# is very big on it. Some other languages are much more relaxed when it comes to combining things, and work on the basis that the programmer knows best. They assume that just because code has been written to do something, that thing must be the right thing. C# is very keen on this (as am I). I think it is important that developers get all the help they can to stop them doing stupid things, and a language that stops you from combining things in a way that might not be sensible is a good thing in my book. Of course, if you really want to impose your will on the compiler and force it to compile your code in spite of any type safety issues you can do this by using casting. Unit test A unit test is a small test which exercises a component and ensures that it performs a particular function correctly. Unit tests should be written alongside the development process so that they can be applied to code just after (or in test drive development just before) the code is written. Value type A value type holds a simple value. Value types are passed as values into method calls and their values are copied upon assignment; i.e. x = y causes the value in y to be copied into x. Changes to the value in x will not affect the value of y. Note that this is in contrast to reference types where the result of the assignment would make x and y refer to the same instance. Virtual Method A method is a member of a class. I can call the method to do a job. Sometimes I may want to extend a class to produce a child class which is a more specialized version of that class. In that case I may want to replace (override) the method in the parent with a new one in the child class. For this to take place the method in the parent class must have been marked as virtual. Only virtual methods can be overridden. Making a method virtual slightly slows down access to it, in that the program must look for any overrides of the method before calling it. This is why not all methods are made virtual initially.

Index
Index  187
Index ( () 25, 27 / /* 45 ; ; 26 { { 26 + + 29 A abstract classes and interfaces 113 methods 112 references to abstract classes 115 accessor 89, 124 arrays 66 elements 67 subscripts 67 two dimensional 69 assignment 27 assignments 56 B base method 109, 117 block 48 boolean 37 brace 26 break 53 button 150 button events 151 C C 20 camel case 38 case 71 casting 41 chain saw 20 char 35, 121 case 123 tests 123 class 25 class members 86 code reuse 106 color 149 column printing 58 comments 45 compiler 21 component properties 148 components 100, 148 computer 12 data processing 13 embedded system 14 hardware & software 12 program 13 programming 15 condition 46 Console 27 constants 49 constructor 94 chaining 111 custom 95 default 95 failure 98 management 97 overloading 96 parameters 96 context 30 continue 54 custom constructors 95 D data 13, 32 data protection 108 default 71 default constructor 95 delegates 156 pointers 156 double 26 E edit form 153 elements 67 enumerated types 72 Equals method 118 escape sequence 35 event management 152 events 156 exception 158 class 158 multiple catches 160 throwing 159 type 158 expressions 39 data types 42 operands 39
Index
Index  188 operators 39 F files streams 134 foreach 136 Form 147, 153 Dispose 155 modal 155 fridge 12 G global namespace 165 gozzinta 27 graphical user interface 147 GUID 106 H hash table 130 Hashtable 130 I identifier 23, 38 if 46 immutable 122 information 13 inheritance 106 integers 33 interface abstraction 100 design 105 implementing 102 implementing multiple 104 reference 103 K keyword 23 L label 148 Length 123 library 162 literal values 32, 42 loops 50 break 53 continue 54 do - while 51 for 52 while 51 M member protection 86 MessageBox 155 metadata 17 methods 23, 59 base method 109 Main 23 overriding 107 replace 110 sealed 110 stopping overriding 110 virtual 108 mutator 87, 124 N namespace 24, 164 global 165 nesting 166 separate files 167 using 166 narrowing 40 nested blocks 65 nesting namespaces 166 new 80, 94 O object class 116 object oriented 21 objects 78, 85, 111 container 127 equals 118 factory method 134 key 131 properties 124 this 119 operands 39 operating system 13 operators 39 combining logical 48 priority 40 relational 46 unary 55 out parameters 63 overflow 33 overloading constructors 96 overriding 107 P parameters 28, 60 parenthesis 29 Parse 28 plumber 15 pointers 156 print formatting 57 print placeholders 57 priority 40 private 87, 88
Index
Index  189 program Main 25 program flow 45 programmer 12 Programmers Point Always provide an equals behaviour 121 Avoid Many Dimensions 69 Block Copy is Evil 107 Break Down Your Conditions 48 Bug fixes cause bugs 170 Casts Add Clarity 43 Check your maths 33 Choose Variable Types Carefully 37 Clever is not always Clever 53 Construction Should Be Planned 98, 99 Data Structures are Important 84 Delegates are strong magic 158 Design wth Methods 61 Design Your Class Construction Process 112 Design your error exceptions yourself 160 Design your fault reporting 168 Document your Side Effects 63 Don’t use new fangled stuff just because it is there 127 Don't Replace Methods 110 Enums are Good 74 Every Message Counts 147 Flipping Conditions 54 Fully Qualified Names are Good 167 Give Your Variables Sensible Names 38 Good Communicators 19 Great Programmers 22 Importance of Hardware 14 Importance of Specification 16 Interfaces are just promises 105 Internationalise your code 100 Know Your Data Source 26 Langauges do Help 63 Make sure you use the right equals 119 Metadata 17 Metadata members Members and Methods 88 Not everything should be possible 86 Pace Your Comments 45 Plan for Failure 64 Plan Your Variables 66 private data and public methods 88 Production Code 141 Program Layout 31 Programming Languages 20 Programs often fail in the error handlers 161 Static Data Members are Useful and Dangerous 92 Static Method Members can be used to make libraries 94 Streams are wonderful 135 Strive for Simplicity 57 Structures are Crucial 77 Stupid Computers 21 Switches are Good 72 Test Driven Development Rocks 90 There is only so much you can do 134 Try to avoid the garbage man 83 Use break With Care 53 Use Numbers Not Messages 144 Use Simple Variable Types 35 Users have strong opinions about the user interface 156 Version Control and Change Management 164, 168, 170 programming languages 19 properties 86, 124 in interfaces 126 public 88 punctuation 31 R ReadLine 27 recipie 22 reference 80, 81, 83 parameters 62 to abstract class 115 replacing methods 110 return 60 S scope 72, 82 sealed 110 searching 129 semicolon 26 source files 161 Star Trek 12 statement 23 returning values 56 static 25, 90 data 91 methods 92 story telling 44 streams 134 string 35, 121 comparison 122 editing 122 immutable 122 Length 123 literal 29 StringBuilder 124 structures 75 accessing 76 defining 76 subscripts 67 switch 70, 71 case 71 System namespace 24 T text based editing 146 TextBox 149
Index
Index  190 this 119 ToString 116 ToUpper 123 Trim 123 U unicode 36 user 12 using 24 V value parameters 62 variable scope 64 variables 23, 32 arrays 66 assignment 39 bool 37 char 35 declaring 33 double 26 float 34 list 26 string 36 structures 75 text 35 types 32 verbatim 37 virtual methods 108 void 25 W widening 40 WriteLine 29