I continued transferring the data I gathered last Friday. I had scheduled my self that I need to finish the reports by 10:00 am to start the tasks given by Sir TJ and Ma’am Loi. Sir TJ asked me to determine the time it takes to finish the four tests in the PCM Wire bond Area 4 and Area 5. The tests included were Ball Shear Test, Wire Pull Test, Ball Access Ratio, and Loop Height. For Area 4 I had already data regarding the Ball Shear Test and the Wire Pull Test, so I just need to time the remaining two test. However, I need it would be my first time for the four tests in Area 5. Moreover, I need to identify what type of die (quad or dual) was being processed. On the other hand, ma’am Loi urgently needs the data about the length of time it takes to finish the Vacuum Dry Pack Operation in Packing Area EOL Area 5. …show more content…
The utilization project was the hardest I had handled so far, because I need to continously observe the time of both the operator and the machine. Ma’am Gem came and asked me if I had sent it to her. I told her that I am still typing the utilization report for Day 2 but I am already done with Day 1. She told me to send the report for her to see the results. She sat beside me and asked about the details of my report. We found out the only 37% was the utilization of the machine and the operator for four hours I conducted TMS. We were discussing about the results and I was struggling to continue finishing the Day 2 report. It was already 12:00 noon when we end