Premium Essay

Performance Issues of Cms in Automobile Industries Using Computer Simulation

In: Business and Management

Submitted By tibtib6
Words 2879
Pages 12
International Journal of Computer Applications (0975 – 8887) Volume 52– No.5, August 2012

Performance Issues of CMS in Automobile Industries using Computer Simulation
J. H. Bhangale
Ph.D. Scholar, LIT, Nagpur RTM Nagpur University, India

A. M. Mahalle
Phd, Reader, LIT, Nagpur
RTM Nagpur University, India

ABSTRACT
Today, every company wants to curtail its expenses. Productivity being the main criteria, the daily demand plays a major role and based on this production takes place. This paper shows how cellular concept has contrasting approach in India and Japan and also, it gives detailed information about cell and cellular layout. Also, it consists of problem identification in the existing layout, objectives and methodology followed to achieve the objectives .In India, few companies like TVS, Maruti etc. have implemented it and other few are in a way of implementation (like Mahindra & Mahindra). A “Cell” is a collection of dissimilar machines or processes, located closely together in a sequential operation manner and dedicated to a set of a similar part and product. Cell is that in which two or more machine should be arrange such that receiving and shipping should be present at same location. Each machine has fix position and dissimilar machines are arranged in a cell so, the layout is known as cellular layout. CMS emphasis on : 1)To reduce through put time of the component, 2)To increase the target of manufacturing component and completion of target as per demand, 3)To maximize manpower utilization, 4) To minimize space utilization, 5)To reduce investment per unit output, 6)To reduce manpower requirement, 7)To improve Material Flow Control, 8)Cell Design, 9)Design Standardization .

2. SIMULATION APPROACH 2.1 Issues related to CMS implementation
 Identification of part families  Identification of cell equipment and allocation of families to

Similar Documents

Premium Essay

Mgmt 4900

...MGMT 4900 Strategy, Policy and Planning Spring 2015 TuTh 12:30 – 1:45pm, BUSN 218 Instructor: | Xian Cao | E-mail: | Xian.Cao@Business.Uconn.Edu | Office:Phone: | School of Business 404(860)486-6423 | Office Hours: | TuTh 1:45 – 2:45pm and By Appointment | I. Course Description and Objectives Course Description: A strategy is an integrated and coordinated commitment designed to exploit a firm’s core competencies. Managers use a strategy to identify market opportunities, analyze competitors, and determine among competing alternatives to enhance the performance of their firms. A strategic decision requires managers to use resources appropriately with respect to external environments in order to help their firms create unique firm value and gain competitive advantages. In this sense, a strategy tells managers what the firm will do as well as what the firm will not do. MGMT 4900 introduces the key concepts, tools and principals of strategic management. It requires you to have an interdisciplinary perspective that uses the ideas, concepts, and theories from your functional courses such as Accounting, Economics, Finance, Marketing, Organizational Behavior, and Statistics. It requires you to take a general management perspective to evaluate and analyze policies in each above functional area and integrate them into an overall competitive strategy. Learning Objectives: * Clearly...

Words: 3733 - Pages: 15

Free Essay

Hydro Turbine Runner Design and Manufacturing

...Vol. 1, No. 2, May 2013 Hydro turbine Runner Design and Manufacturing Fatma Ayancik, Umut Aradag, Ece Ozkaya, Kutay Celebioglu, Ozgur Unver, and Selin Aradag  Abstract—This research describes a methodology for the parametric design, computational fluid dynamics (CFD) aided analysis and manufacturing of a Francis type hydro turbine runner. A Francis type hydro turbine consists of five components which are volute, stay vanes, guide vanes, runner and draft tube. The hydraulic performance of the turbine depends on the shape of the components; especially on the shape of the runner blades. The design parameters for the other components are affected by the runner parameters directly. Runner geometry is more complex than the other parts of the turbine. Therefore; to obtain accurate results and meet hydraulic expectations, CFD analyses and advanced manufacturing tools are necessary for the design and manufacturing of the hydro turbine runner. The turbine runner design methodology developed is presented using an actual potential hydraulic power plant in Turkey. Index Terms—CFD, francis turbine, runner, design and manufacturing. I. INTRODUCTION Turbines are used for hydropower generation. There are basically two types of hydraulic turbines, the first one is impulse and the second one is reaction type turbines. Impulse turbines work based on momentum principle; while in the reaction type turbines, the flow is fully pressurized and it works according to conservation of angular momentum...

Words: 2847 - Pages: 12

Premium Essay

All Terrain Ground Vehicle for Low Intensity Conflict (Atv)

...PROJECT REPORT On All terrain Ground Vehicle for Low Intensity Conflict (ATV) By Bhabani Prasad Nayak(10608025), Aasis Moharana(10608002) Abhay Kumar Dash(10608003),Ratnesh Kumar(10608080) Under the guidance of Mr. J. VIJAY PRABHU, M.E. ASSISTANT PROFESSOR DEPARTMENT OF INSTRUMENTATION AND CONTROL ENGINEERING Submitted in partial fulfillment of the requirement for the award of the degree of BACHELOR OF TECHNOLOGY In INSTRUMENTATION AND CONTROL ENGINEERING Of SRM Nagar,Kattankulathur- 603 203 Kancheepuram District i BONAFIDE CERTIFICATE This is to certify that the project report titled ―All terrain Ground Vehicle or Low Intensity Conflict (ATV)‖ is a bonafide work of Bhabani Prasad Nayak(10608025), Aasis Moharana(10608002), Abhay kumar Dash(10608003), Ratnesh Kumar(10608080) who carried out the project work under my guidance.Certified further that to the best of my knowledge the work reported here in does not form part of any other project or dissertation on the basis of which a degree or award was conferred on an earlier occasion on this or any other candidate. PROJECT GUIDE Mr.J Vijay Prabhu Assistant Professor Instrumentation and Control Engineering HEAD OF THE DEPARTMENT Dr.A.Vimala Juliet Professor Instrumentation and Control Engineering SRM UNIVERSITY SRM UNIVERSITY INTERNAL EXAMINER DATE: EXTERNAL EXAMINER DATE: ii ACKNOWLEDGEMENT We sincerely acknowledge in all earnestness, the patronage provided by our Director Dr.C.Muthamizchelvan...

Words: 15141 - Pages: 61

Premium Essay

Asignment

...to Supply Chain Management Problem 1: Consider the supply chain for a domestic automobile. a. What are the components of the supply chain for the automobile? b. What are the different firms involved in the supply chain? c. What are the objectives of these firms? d. Provide examples of conflicting objectives in this supply chain. e. What are the risks that rare or unexpected events pose to this supply chain? Answer: a. The supply chain for a car typically includes the following components:: 1. Suppliers for raw materials 2. Suppliers for parts and subsystems 3. Automobile manufacturer (Ford, in the example). Within a company, there are also different departments, which constitute the internal supply chain: i. Purchasing and material handling ii. Manufacturing iii. Marketing, etc. 4. Transportation providers 5. Automobile dealers b. Many firms are involved in the supply chain. 6. Raw material suppliers. For instance, suppliers for steel, rubber, plastics, etc. 7. Parts suppliers. For instance, suppliers for engines, steering wheels, seats, and electronic components, etc. 8. Automobile manufacturer. For instance, Ford. 9. Transportation providers. For instance, shippers, trucking companies, railroads, etc. 10. Automobile dealers. For instance, Hayward Ford. c. All companies involved in the...

Words: 22678 - Pages: 91

Premium Essay

Hmi Controlled Classroom

...that is the result of a technologically inclined society. Eventually, living without technology is like a soldier without gun; that is how people are so much dependent with technology today. Nowadays, some customers such as hospitals, manufacturing, industries, commercial establishments, schools, buildings and homes are dependent on electrical devices and equipment. These devices are controlled by modern technology for their operations, controls and processes. This includes remote sensing, SCADA, HMI, micro controller sensors and PLC. They are used for automatic control of lights and switches, and for remotely controlled operation of equipment or machine. These modern technologies save time, costs, and labor. The researcher conceptualized this study about the modern technology using HMI in the school specifically the laboratory room. Laboratory should be conducive to learning so that students are encouraged to study. It is a room where the students have the basic knowledge in theoretical aspects before they ought to gain knowledge outside. So, the study is focus on the development of a modernized laboratory equipped with automatic controls. Before laboratory is just a room with equipment, many lights, and switches. They are using manual switching of the facilities inside a laboratory room which is done manually. The turning on and off the equipment gave waste time and energy. The conceptualization of a modern laboratory gave the students an edge in modern technology as well as...

Words: 15414 - Pages: 62

Premium Essay

Taguchi Method

...Bombay–400 076 November, 2002 ABSTRACT The underlying principles, techniques & methodology of robust design are discussed in detail in this report with a case study presented to appreciate the effectiveness of robust design. The importance of Parameter design & Tolerance design as the major elements in Quality engineering are described. The Quadratic loss functions for different quality characteristics are narrated, highlighting the fraction defective fallacy. The aim of the robust design technique is to minimize the variance of the response and orthogonal arrays are an effective simulation aid to evaluate the relative effects of variation in different parameters on the response with the minimum number of experiments. Statistical techniques like ANOM (analysis of means) and ANOVA (analysis of variance) are the tools for analyzing the data obtained from the orthogonal array based experiments. Using this technique of robust design the quality of a product or process can be improved through minimizing the effect of the causes of variation without eliminating the causes. Fundamental ways of improving the reliability of a product are discussed highlighting the importance of robust design on this. Based on the classification of uncertainties in design, the role of robust design optimization & reliability based design optimization are discussed. The mathematical formulations for these types of optimization strategies are explained. Based on this study, it can be concluded that the robust...

Words: 12307 - Pages: 50

Premium Essay

Information System

...Introduction to Mathematics, 1911 Computer Abstractions and Technology 1.1 Introduction 3 1.2 Eight Great Ideas in Computer Architecture 11 1.3 Below Your Program 13 1.4 Under the Covers 16 1.5 Technologies for Building Processors and Memory 24 1.6 Performance 28 1.7 The Power Wall 40 1.8 The Sea Change: The Switch from Uniprocessors to Multiprocessors 43 1.9 Real Stuff: Benchmarking the Intel Core i7 46 1.10 Fallacies and Pitfalls 49 1.11 Concluding Remarks 52 1.12 Historical Perspective and Further Reading 54 1.13 Exercises 54 1.1 Introduction Welcome to this book! We’re delighted to have this opportunity to convey the excitement of the world of computer systems. This is not a dry and dreary field, where progress is glacial and where new ideas atrophy from neglect. No! Computers are the product of the incredibly vibrant information technology industry, all aspects of which are responsible for almost 10% of the gross national product of the United States, and whose economy has become dependent in part on the rapid improvements in information technology promised by Moore’s Law. This unusual industry embraces innovation at a breath-taking rate. In the last 30 years, there have been a number of new computers whose introduction appeared to revolutionize the computing industry; these revolutions were cut short only because someone else built an even better computer. This race to innovate has...

Words: 24107 - Pages: 97

Free Essay

Sehandbook

...SYSTEMS ENGINEERING HANDBOOK A GUIDE FOR SYSTEM LIFE CYCLE PROCESSES AND ACTIVITIES INCOSE-TP-2003-002-03 June 2006 INCOSE Systems Engineering Handbook v. 3 SYSTEMS ENGINEERING HANDBOOK A GUIDE FOR SYSTEM LIFE CYCLE PROCESSES AND ACTIVITIES INCOSE-TP-2003-002-03 INCOSE SYSTEMS ENGINEERING HANDBOOK, version 3 June 2006 Edited by: Cecilia Haskins Copyright © 2006 International Council on Systems Engineering, subject to restrictions listed on the inside cover. INCOSE-TP-2003-002-03 June 2006 INCOSE Systems Engineering Handbook v. 3 This INCOSE Technical Product was prepared by the Systems Engineering Handbook Development Team of the International Council on Systems Engineering (INCOSE). It is approved by INCOSE for release as an INCOSE Technical Product. Copyright © 2006 by INCOSE, subject to the following restrictions: Author use: Authors have full rights to use their contributions in a totally unfettered way with credit to this INCOSE Technical Product. Abstraction is permitted with credit to the source. INCOSE use: Permission to reproduce this document and use this document or parts thereof by members of INCOSE and to prepare derivative works from this document for INCOSE use is granted, with attribution to INCOSE and the original author(s) where practical, provided this copyright notice is included with all reproductions and derivative works. Content from ISO/IEC 15288:2002(E) are used by permission, and are not to be reproduced other than...

Words: 63595 - Pages: 255

Free Essay

Nit-Silchar B.Tech Syllabus

...NATIONAL INSTITUTE OF TECHNOLOGY SILCHAR Bachelor of Technology Programmes amï´>r¶ JH$s g§ñWmZ, m¡Úmo{ à VO o pñ Vw dZ m dY r V ‘ ñ Syllabi and Regulations for Undergraduate PROGRAMME OF STUDY (wef 2012 entry batch) Ma {gb Course Structure for B.Tech (4years, 8 Semester Course) Civil Engineering ( to be applicable from 2012 entry batch onwards) Course No CH-1101 /PH-1101 EE-1101 MA-1101 CE-1101 HS-1101 CH-1111 /PH-1111 ME-1111 Course Name Semester-1 Chemistry/Physics Basic Electrical Engineering Mathematics-I Engineering Graphics Communication Skills Chemistry/Physics Laboratory Workshop Physical Training-I NCC/NSO/NSS L 3 3 3 1 3 0 0 0 0 13 T 1 0 1 0 0 0 0 0 0 2 1 1 1 1 0 0 0 0 4 1 1 0 0 0 0 0 0 2 0 0 0 0 P 0 0 0 3 0 2 3 2 2 8 0 0 0 0 0 2 2 2 2 0 0 0 0 0 2 2 2 6 0 0 8 2 C 8 6 8 5 6 2 3 0 0 38 8 8 8 8 6 2 0 0 40 8 8 6 6 6 2 2 2 40 6 6 8 2 Course No EC-1101 CS-1101 MA-1102 ME-1101 PH-1101/ CH-1101 CS-1111 EE-1111 PH-1111/ CH-1111 Course Name Semester-2 Basic Electronics Introduction to Computing Mathematics-II Engineering Mechanics Physics/Chemistry Computing Laboratory Electrical Science Laboratory Physics/Chemistry Laboratory Physical Training –II NCC/NSO/NSS Semester-4 Structural Analysis-I Hydraulics Environmental Engg-I Structural Design-I Managerial Economics Engg. Geology Laboratory Hydraulics Laboratory Physical Training-IV NCC/NSO/NSS Semester-6 Structural Design-II Structural Analysis-III Foundation Engineering Transportation Engineering-II Hydrology &Flood...

Words: 126345 - Pages: 506

Premium Essay

Solar Cell

...Solar Cell Technology and Applications More free ebooks : http://fast-file.blogspot.com OTHER AUERBACH PUBLICATIONS Advances in Semantic Media Adaptation and Personalization, Volume 2 Marios Angelides ISBN: 978-1-4200-7664-6 Architecting Secure Software Systems Manish Chaitanya and Asoke Talukder ISBN: 978-1-4200-8784-0 Architecting Software Intensive Systems: A Practitioners Guide Anthony Lattanze ISBN: 978-1-4200-4569-7 Business Resumption Planning, Second Edition Leo Wrobel ISBN: 978-0-8493-1459-9 Converging NGN Wireline and Mobile 3G Networks with IMS: Converging NGN and 3G Mobile Rebecca Copeland ISBN: 978-0-8493-9250-4 Delivering Successful Projects with TSPSM and Six Sigma: A Practical Guide to Implementing Team Software ProcessSM Mukesh Jain ISBN: 978-1-4200-6143-7 Designing Complex Systems: Foundations of Design in the Functional Domain Erik Aslaksen ISBN: 978-1-4200-8753-6 The Effective CIO: How to Achieve Outstanding Success through Strategic Alignment, Financial Management, and IT Governance Eric Brown and William Yarberry, Jr. ISBN: 978-1-4200-6460-5 Enterprise Systems Backup and Recovery: A Corporate Insurance Policy Preston Guise ISBN: 978-1-4200-7639-4 Essential Software Testing: A Use-Case Approach Greg Fournier ISBN: 978-1-4200-8981-3 The Green and Virtual Data Center Greg Schulz ISBN: 978-1-4200-8666-9 How to Complete a Risk Assessment in 5 Days or Less Thomas Peltier ISBN: 978-1-4200-6275-5 HOWTO Secure and Audit Oracle 10g and 11g Ron Ben-Natan ISBN:...

Words: 67543 - Pages: 271

Free Essay

Fuzzy Control

...reproduced, or stored in a database or retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of the publisher. Printed in the United States of America. Printed simultaneously in Canada. Many of the designations used by manufacturers and sellers to distinguish their products are claimed as trademarks. Where those designations appear in this book, and AddisonWesley was aware of a trademark claim, the designations have been printed in initial caps or in all caps. MATLAB is a registered trademark of The MathWorks, Inc. Library of Congress Cataloging-in-Publication Data Passino, Kevin M. Fuzzy control / Kevin M. Passino and Stephen Yurkovich. p. cm. Includes bibliographical references and index. ISBN 0-201-18074-X 1. Automatic control. 2. Control theory. 3. Fuzzy systems. I. Yurkovich, Stephen. II. Title. TJ213.P317 1997 629.8’9--DC21 97-14003 CIP Instructional Material Disclaimer: The...

Words: 211473 - Pages: 846

Premium Essay

Strategy Management

...platform also includes author-developed case exercises for all 12 cases in this edition that require students to work through answers to assignment questions for each case. These exercises have multiple components and can include: calculating assorted financial ratios to assess a company’s financial performance and balance sheet strength, identifying a company’s strategy, doing five-forces and driving-forces analysis, doing a SWOT analysis, and recommending actions to improve company performance. The content of these case exercises is tailored to match the circumstances presented in each case, calling upon students to do whatever strategic thinking and strategic analysis is called for to arrive at a pragmatic, analysis-based action recommendation for improving company performance. eBook Connect Plus includes a media-rich eBook that allows you to share your notes with your students. Your students can insert and review their own notes, highlight the text, search for specific information, and interact with media resources. Using an eBook with Connect Plus gives your students a complete digital solution that allows them to access their materials from any computer. Tegrity Make your classes available anytime, anywhere. With simple, one-click recording, students can search for a word or phrase and be taken to the exact place in your lecture that they need to review. EASY TO USE Learning Management System Integration McGraw-Hill Campus is a...

Words: 219639 - Pages: 879

Premium Essay

Two Wheeler

...VOLUME NO. 4 (2014), ISSUE N O. 10 (OCTOBER) ISSN 2231-5756 A Monthly Double-Blind Peer Reviewed (Refereed/Juried) Open Access International e-Journal - Included in the International Serial Directories Indexed & Listed at: Ulrich's Periodicals Directory ©, ProQuest, U.S.A., EBSCO Publishing, U.S.A., Cabell’s Directories of Publishing Opportunities, U.S.A., Open J-Gage, India [link of the same is duly available at Inflibnet of University Grants Commission (U.G.C.)], Index Copernicus Publishers Panel, Poland with IC Value of 5.09 & number of libraries all around the world. Circulated all over the world & Google has verified that scholars of more than 3480 Cities in 174 countries/territories are visiting our journal on regular basis. Ground Floor, Building No. 1041-C-1, Devi Bhawan Bazar, JAGADHRI – 135 003, Yamunanagar, Haryana, INDIA http://ijrcm.org.in/ VOLUME NO. 4 (2014), ISSUE N O. 10 (OCTOBER) ISSN 2231-5756 CONTENTS Sr. TITLE & NAME OF THE AUTHOR (S) No. 1. BRAND PRIDE AS A CONSTRUCT CONTRIBUTING TO RETAINING MISSION CRITICAL TALENT OF THE 2. 3. 4. ORGANIZATION: A COMPARATIVE STUDY OF SELECTED ORGANIZATIONS DR. GEETA BANSAL & DR. PARUL PANDEY CONSUMER ATTITUDE AND PERCEPTION TOWARD BRANDS OF EDIBLE OIL: AN EMPIRICAL STUDY AMITA SHARMA & DR. D. S. CHAUBEY CAPITAL STRUCTURE AND ITS IMPACT ON PROFITABILITY OF AUTOMOTIVE INDUSTRY: THE INDIAN CASE SANJAY HIRAN & DR. MAHENDRA SOJATIA MERGERS AND ACQUISITIONS IN INDIAN BANKING SECTOR: AN IMPACT ANALYSIS...

Words: 8606 - Pages: 35

Free Essay

Aa Bb Cc

...models, the distinction between body style and classification is particularly narrow. Please note that while each body style has a historical and technical definition, in common usage such definitions are often blurred. Over time, the common usage of each term evolves. For example, people often call 4-passenger sport coupés a "sports car", while purists will insist that a sports car by definition is limited to two-place vehicles. Body work In automotive engineering, the bodywork of an automobile is the structure which protects: ⦁ The occupants ⦁ Any other payload ⦁ The mechanical components. In vehicles with a separate frame or chassis, the term bodywork is normally applied to only the non-structural panels, including doors and other movable panels, but it may also be used more generally to include the structural components which support the mechanical components. Construction There are three main types of automotive bodywork: ⦁ The first automobiles were designs adapted in large part from horse-drawn carriages, and had body-on-frame construction with a wooden frame and wooden or metal body panels. Wooden-framed motor vehicles remain in production to this day, with many of the cars made by the Morgan Motor Company still having wooden structures underlying their bodywork. ⦁ A steel chassis or ladder frame replaced the wooden frame. This form...

Words: 18375 - Pages: 74

Premium Essay

Micro Cars

...WRITTEN REPORT – TP019 Micro+ Ridhwan Ismail Perlyn Ho Brandon Goh Yeo Li Sin Seow Jia Chun TAMPINES JUNIOR COLLEGE PROJECT WORK WRITTEN REPORT – TP019 Micro+ Ridhwan Ismail Perlyn Ho Brandon Goh Yeo Li Sin Seow Jia Chun TAMPINES JUNIOR COLLEGE PROJECT WORK Contents | | | Chapter 1 | Introduction | Page | 1.1 | Project Aim | 1 | 1.2 | Project Context: Microcars | 1-3 | 1.3 | Influence of Microcars | 4 | 1.3.1 | Positive Impacts | 4-5 | 1.3.2 | Negative Impacts | 5-6 | Chapter 2 | Analysis of Current Solutions | | 2.1 | Target Group | 7 | 2.2 | Overview of Current Measures | 7 | 2.3 | Kenguru B1 | 8 | 2.4 | EQUAL | 9 | 2.4.1 | EQUAL's Entry System | 9 | 2.5 | Limitations of Current Measures | 10 | Chapter 3 | Micro+ | | 3.1 | Aim & Design Objectives | 11 | 3.2 | Independence | 12 | 3.2.1 | Laser Guidance | 12-14 | 3.2.2 | Friction Drive Module (FDM) | 15-16 | 3.2.3 | Ramp | 16-17 | 3.3 | Usability | | 3.3.13.3.2 | Modified Steering MechanismExpanding Width | 1819 | 3.4 | Summary | 19 | Chapter 4 | Evaluation of Ideas | | 4.1 | Methods | 20 | 4.2 | Effectiveness | 20-21 | 4.3 | Feasibility | 21 | 4.3.1 | Limitations | 21 | 4.3.2 | Solutions | 21-24 | Chapter 5 | Project Summary | | 5.1 | Summary of Project | 25 | 5.2BibliographyAnnexes | Future Directions | 25-2627-2829-44 | | | | | | | Chapter 1 Introduction 1.1 Project Aim This project aims to improve on the...

Words: 7295 - Pages: 30