Free Essay

Proton

In:

Submitted By ozkansa
Words 320
Pages 2
Proton Issue in Malaysia

1 Introduction

This paper investigates the background, history, problems emerged and ways to improve of Proton cars in Malaysia. The objective of this paper is not only to find out the problems faced by Proton, but also to discuss the ways in order to improve the Proton reliability and retrieve the supporter’s heart to keep using Proton car in the automotive sector.

However, in this competitive time where there are a lot of so-called competitors such as Hyundai, Toyota, and Perodua no matter foreign or local brand cars had caused the Proton car buyers to reduce significantly. This phenomenon occurred not merely because of the high quality of other cars; it also ascribed by Proton’s problems itself.

This can be seen as the issues of Proton had been argued for a long time for its function problem, for example. Consequently, the Proton buyers tend to address dissatisfied with it, complains about the unreliable of Proton as well as do not support the Proton cars continuously.

The production of a so-called ‘national car’- Proton has been concerned nowadays. They should improve their technology skill and service to gain back customers’ confidence.

2 Background

Starting from 1979, Malaysia's Father of Modernization, Tun Dr. Mahathir bin Mohamad, who was the Deputy Prime Minister at that time, suggested the idea of establishing an automotive assembling and manufacturing industry in our country. Tun Dr. Mahathir was the first person who considered the idea of having a Malaysian car. The Cabinet approved the National Car Project in 1982. Perusahaan Otomobil Nasional Berhad (PROTON) was incorporated in May 7, 1983 to manufacture, assemble and sell motor vehicles and related products, including accessories, spare parts and other components. PROTON produced Malaysia's first car, the Proton Saga, commercially launched on July 9, 1985. In 1986, barely a year after our first car was launched, we celebrated the official rollout of the 10...

Similar Documents

Free Essay

Proton

...Project in 1982. The dream was fulfilled when PROTON was officially incorporated on May 7, 1983. Our very first model, the Proton Saga was commercially launched on July 9, 1985. The name "Saga" was chosen by Ismail Jaafar, a retired military soldier, and derived from "saga" (Adenanthera pavonina), a type of seed commonly found in Malaysia. The first new market for the Proton Saga was Singapore, right across the Straits of Johor. In 1986, barely a year after our first car was launched, we celebrated the official rollout of the 10,000th Proton The following year, we launched the Proton Saga 1.5l sedan and Aeroback models. By then, over 50,000 units of the Proton Saga had been produced and sold in Bangladesh, Brunei, New Zealand, Malta and Sri Lanka. Soon after, Proton cars were distributed in the United Kingdom. In 1988, PROTON debuted at the British International Motorshow, walking away successfully with three prestigious awards for quality, coachwork and ergonomics. In 1996, we produced our 1 millionth. We progressed towards in-house engine operations in 1989. In our quest to upgrade our technological prowess, a Transmission Assembly Plant was also set up in Shah Alam. In 1996, we produced our one millionth car. This achievement was buoyed by several significant new model launches including the Proton Tiara, Proton Wira 2.0 Diesel and the two-door Proton Putra, in addition to our existing lineup of the Proton Wira, Proton...

Words: 1071 - Pages: 5

Free Essay

Proton

...MARKET SUMMARY Proton is the Malaysian national automobile manufacturer (Malay acronym for Perusahaan OTOmobil Nasional, 'National Automobile Enterprise'), which was established in 1983 under the direction of the former Prime Minister, Dr. Mahathir Mohamad. Proton Holdings Berhad, the holding company, is listed on the Bursa Malaysia. Based on technology and parts from Mitsubishi Motors, production of the first model, the Proton Saga began in September 1985 at its first manufacturing plant in Shah Alam, Selangor. Initially the components of the car were entirely manufactured by Mitsubishi but slowly local parts were being used as technologies were transferred and skills were gained. The 100,000th Proton Saga was produced in January 1989. Until the end of the 1990s, the car's logo featured the crest from Malaysia's coat of arms, featuring a crescent and a fourteen-pointed star. The new Proton logo features a stylized tiger head. In 1993, a model called Proton Wira was introduced based on the Mitsubishi Lancer/Colt. More than 220,000 units were sold between 1996 and 1998. Proton Perdana, based on the Mitsubishi Galant/Eterna, was first produced in 1995, intended for higher end market. The Proton Waja (Proton Impian in UK), which launched early 2001, is the first car model designed internally by Proton. By 2002 Proton held a market share of over 60% in Malaysia, which was reduced to barely 30% by 2005 and is expected to reduce further in 2008 when AFTA mandates reduce import...

Words: 9085 - Pages: 37

Premium Essay

Proton Case

...Proton (automobile) From Wikipedia, the free encyclopedia Jump to: navigation, search Proton Holdings Berhad The Proton Company logo Type Public (Bursa Malaysia: Proton) Industry Automotive Founded May 7, 1983 Headquarters Shah Alam, Selangor Malaysia Key people Mohd Khamil Bin Jamil (Executive Chairman) Products Car, Automotive Parts Employees 12,000 Subsidiaries Lotus Cars Website www.proton.com Proton Holdings Berhad (stylized PROTON) is a Malaysian automobile manufacturer. It is headquartered in Shah Alam, Selangor and operates an additional manufacturing plant in Tanjung Malim, Perak. The company was established in 1983 as the sole national car company until the advent of Perodua in 1993. Proton is a Malay acronym for Perusahaan Otomobil Nasional Sendirian Berhad. (English: National Automobile Company Private Limited). Proton was largely a manufacturer of badge engineered vehicles from Mitsubishi Motors between 1985 and the early 2000s. The company has since produced several indigenously designed models and operates in at least 26 countries today, of which the majority are in Asia. Proton was formerly owned by Khazanah Nasional, the investment holding arm of the government of Malaysia. In January 2012, it was taken over by DRB-HICOM, a Malaysian conglomerate in a transaction amounting RM1.2 billion. Proton, predominantly reliant on its domestic market is currently undergoing structural and internal changes, as evident in the appointment of...

Words: 8392 - Pages: 34

Premium Essay

Proton Case

... | |3 | | |INTRODUCTION | | |2 | |5 | | |SWOT ANALYSIS | | |3 | |7 | | |ISSUE IN PROTON | | |4 | |11 | |...

Words: 3375 - Pages: 14

Free Essay

Proton Project

...COLLEGE OF BUSINESS MANAGEMENT AND ACCOUNTING SULTAN HAJI AHMAD SHAH CAMPUS MUADZAM SHAH, PAHANG ACSB 413 CASE STUDY “PROTON –FROM SAGA TO EXORA” PREPARED BY: BIBI SHAZREENA BINTI NOORZILA AC087143 MUHAMMAD SYAFIQ RAZELIN BIN ANIS ROZIDI AC088438 NOR AIME BINTI MOHD NOR AC088220 NURAINI BINTI ABDUL AZIZ AC088484 PREPARED FOR: SIR AZWAN ABDUL RASHID COMPANY BACKGROUND PERUSAHAAN OTOMOBIL NASIONAL BERHAD or PROTON was incorporated on May 7, 1983 to manufacture, assemble and sell motor vehicles and related products, including accessories, spare parts and other components. PROTON produced Malaysia’s first car, the Proton SAGA which was commercially launched on July 9, 1985 by Malaysian Prime Minister, Dato’ Seri Dr. Mahathir Mohamad who conceived the idea of a Malaysian car. PROTON was publicly listed on the Kuala Lumpur Stock Exchange (KLSE) in 1992 and its shareholders include Khazanah Nasional Berhad, Petroliam Nasional Berhad, Mitsubishi Corporation, Mitsubishi Motors Corporation, Employee Provident Fund Board and other local and foreign investors. Proton Holdings Berhad, through its subsidiaries, manufactures, assembles, and sells motor vehicles and related products primarily in Malaysia. It also involves in the importation, distribution, and wholesale of motor vehicle and related parts; development and management of properties, as...

Words: 2729 - Pages: 11

Free Essay

Marketing Proton

...MARKET SUMMARY Proton is the Malaysian national automobile manufacturer (Malay acronym for Perusahaan OTOmobil Nasional, 'National Automobile Enterprise'), which was established in 1983 under the direction of the former Prime Minister, Dr. Mahathir Mohamad. Proton Holdings Berhad, the holding company, is listed on the Bursa Malaysia. Based on technology and parts from Mitsubishi Motors, production of the first model, the Proton Saga began in September 1985 at its first manufacturing plant in Shah Alam, Selangor. Initially the components of the car were entirely manufactured by Mitsubishi but slowly local parts were being used as technologies were transferred and skills were gained. The 100,000th Proton Saga was produced in January 1989. Until the end of the 1990s, the car's logo featured the crest from Malaysia's coat of arms, featuring a crescent and a fourteen-pointed star. The new Proton logo features a stylized tiger head. In 1993, a model called Proton Wira was introduced based on the Mitsubishi Lancer/Colt. More than 220,000 units were sold between 1996 and 1998. Proton Perdana, based on the Mitsubishi Galant/Eterna, was first produced in 1995, intended for higher end market. The Proton Waja (Proton Impian in UK), which launched early 2001, is the first car model designed internally by Proton. By 2002 Proton held a market share of over 60% in Malaysia, which was reduced to barely 30% by 2005 and is expected to reduce further in 2008 when AFTA mandates reduce import...

Words: 9052 - Pages: 37

Premium Essay

Proton Therapy

...Topic: Benefits of Proton Therapy Outline Format: Topical Benefits of Proton Therapy in Cancer Patients Cancer remains the second most common cause of death in the US, accounting for nearly one of every four deaths. About 13 million Americans have cancer and more than 1 million are diagnosed every year. Although there are different treatments available that kills cancer, proton therapy provides a better quality of life during and after cancer treatment than others. Today I am here to inform you on the benefits of proton therapy in cancer patients. Proton therapy is a type of radiation treatment that uses a focused, high-energy proton beam to kill cancer cells with precision and accuracy. This way the surrounding healthy tissues are not damaged and the patient lives life to the fullest while recovering faster and having minimal to zero side effects. Proton therapy will play a crucial role in the future of cancer treatment. It is the most advanced cancer radiation treatment available till date. In a December 2008 article written by Glennda Chui published in symmetrymagazine.org, Chui quotes Dr. James Slater, in charge of radiation medicine at Loma Linda (home to the U.S.’s first hospital-based proton therapy cancer treatment center), that, “working with protons, that this was really the way to go—that X-rays had been brought to their limits and we needed a new particle.” Today I will discuss three benefits of proton therapy in cancer patients; treatment of harder to reach tumor...

Words: 1352 - Pages: 6

Free Essay

Proton Beam Techology

... Pearson is against the idea about the investment towards new proton beam treatment. The new technology will cost more than $180 million just to build a facility to use the proton beam machines. Emanuel and Pearson argue in favor of Americans because they do not believe that Americans taxpayers should pay the excessive amount of money towards proton beam machines that lack evidence of curing cancer more effectively. The issue that arises about the topic is that there are cheaper alternatives of radiation, that cancer patients can receive for fraction of the price of proton beam therapy which can cost $50,000 a treatment. During these hard economic times it is unreasonable to follow through with the outrageous sum of money it requires and yet it does not have any significant scientific evidence it can cure cancer. Therefore the money going towards the proton beam technology is better used elsewhere. Instead of spending the outrageous sum of money on the two new proton beam treatment facilities at the Mayo Clinic which are located in Minnesota and Arizona because it will cost more than $180 million dollars each. The claim that the authors wanted to make to the public is that the proton beam technology should not be invested in because of its high risk and low reward . The benefit cost analysis of having proton beam technology compare to not having it, is pretty obvious. The proton beam technology is inferior to other forms of radiation treatment...

Words: 1114 - Pages: 5

Premium Essay

Proton Issue in Malaysia

...1 Introduction This paper investigates the background, history, problems emerged and ways to improve of Proton cars in Malaysia. The objective of this paper is not only to find out the problems faced by Proton, but also to discuss the ways in order to improve the Proton reliability and retrieve the supporter’s heart to keep using Proton car in the automotive sector. However, in this competitive time where there are a lot of so-called competitors such as Hyundai, Toyota, and Perodua no matter foreign or local brand cars had caused the Proton car buyers to reduce significantly. This phenomenon occurred not merely because of the high quality of other cars; it also ascribed by Proton’s problems itself. This can be seen as the issues of Proton had been argued for a long time for its function problem, for example. Consequently, the Proton buyers tend to address dissatisfied with it, complains about the unreliable of Proton as well as do not support the Proton cars continuously. The production of a so-called ‘national car’- Proton has been concerned nowadays. They should improve their technology skill and service to gain back customers’ confidence. 2 Background Starting from 1979, Malaysia's Father of Modernization, Tun Dr. Mahathir bin Mohamad, who was the Deputy Prime Minister at that time, suggested the idea of establishing an automotive assembling and manufacturing industry in our country. Tun Dr. Mahathir was the first person who considered...

Words: 3375 - Pages: 14

Premium Essay

Case Study Proton

...OVERVIEW Proton Holdings Berhad (PROTON) is a Malaysian automobile manufacturer. It is headquartered in Shah Alam, Selangor and operates an additional manufacturing plant in Tanjung Malim, Perak. The company was established in 1983 as the sole national car company following the wishes of former Prime Minister Tun Mahathir Mohammad until the advent of Perodua in 1993. Proton is a Malay acronym for Perusahaan Otomobil Nasional Sendirian Berhad. (National Automobile Company Private Limited). At first, parts and technology came from Mitsubishi but later on, as experience accumulated, Proton became independent even if most of the cars were still based on Mitsubishi models. Their first model which was launched in 1985 was called the Proton Saga. Soon after the first Sagas were rolling on Malaysian streets, exports started to Bangladesh (1986) and by 1987 Proton had already made 50,000 units. That same year a distribution agreement with a UK dealer was made in order to ship Sagas over to the British Isles but that would materialize only in 1989, when 150,000 units were already produced and plans for engine assembly plant were already under way, the inauguration being celebrated in 1991. A new model, the Proton Iswara was launched in 1992 and then in 1993 the Wira, a model based on the Mitsubishi Colt, which enjoyed moderate success with 220,000 units sold over 2 years. In 1994, the Proton Satria joined the model line-up and in 1996 the Proton Tiara. With thousands of models sold...

Words: 3988 - Pages: 16

Free Essay

Proton Case Study

...PROTON From SAGA to IRIS MAF 680 INTEGRATED CASE STUDY EXECUTIVE SUMMARY A multinational motor industry giant (assume MAZDA) had sensed opportunity in Proton and approached a consultant, Chartered Accountant Saiful Alawi, to review Proton and recommend whether an investment or collaboration should be considered. Saiful Alawi needed to consider a number of significant factors in order to arrive at the decisions. Basically, PROTON was incorporated on 7th May 1983 to manufacture, assemble and sell motor vehicles and related products. PROTON produced Malaysia’s first car, the Proton SAGA which was commercially launched on 9th July 1985. Proton’s model products includes Saga, Iswara, Wira, Satria, Perdana, Putra, Gen 2, Savvy, Satria Neo, Persona, Exora and most recently Iriz. Despite all that, Proton has being criticized for poor quality control. Automotive industry becomes more competitive and always facing challenges. Globalisation and liberalisation allows the industry to penetrate the local and regional markets. Globalisation describes a process by which national and regional economies, societies and cultures have become integrated through the global network of trade, communication, immigration and transportation. On the other hand, liberalisation is defined as a process whereby measures are taken to expand market access to foreign services providers or to diminish discrimination against them to the domestic suppliers. I as a Saiful Alawi used Balanced Scorecard approach...

Words: 874 - Pages: 4

Premium Essay

Proton External Environment Analysis

...Proton’s External Environment Analysis Contents Introduction 4 PART: 1 Proton Introduction 4 About Proton 4 PART: 2 Proton’s External Environment Analysis 5 2.1 PESTEL Analysis 6 2.1.1 Political and legal factors 7 2.1.2 Economic Factors 7 2.1.3 Social-Cultural Factors 8 2.1.4 Technological Factors 8 2.1.5 Environmental Factors 11 2.2 PROTON’s SWOT Analysis 12 2.3 Industry Analysis 12 Proton five forces model 13 2.3.1 Threat of New Entrants 13 2.3.2 Bargaining Power of Suppliers 13 2.3.3 Bargaining Power of Customers 14 2.3.4 Threats of Substitutes 14 2.3.5 Competitive Rivalry between Existing Players 14 2.4 Some other external factors 15 2.4.1 Change in Customer Demand 15 2.4.2 Globalization 16 PART: 3 17 Recommendation 17 3.1 How can we deal with the pressure of innovation? 17 3.2 Cost Control 19 3.4 Innovative feature’s pricing decision 20 3.4 Dealer knowledge in customers 20 Conclusion 20 References 22 Appendixes 25 Appendix-1 Supplier spending on R&D 25 Appendix-2 Changes in external force 25 Appendix-3 Critical industry skills 25 Appendix-4 Expected challenges of automotive industry 26 Introduction The report is going to conduct Proton external analysis and the report has been divided into main three parts. The first part will be discuss some background of the company. The secondary part complete external analysis through using PESTEL, SWOT and Porter five forces model. The third and last part...

Words: 3692 - Pages: 15

Free Essay

Responsible Business Proton Malaysia

...be more concern in business operation and interaction with stakeholders. According to Starbucks (2004), a responsible company is the one who always listen to the stakeholders and response honestly with concern. Stake holders can be categorise as a person, organisation or a group that has interest or related in an organization. Examples for stakeholders are directors, creditors, employees, shareholders, supplies, government, the community and unions. Proton 1.2 History of Proton Malaysia PROTON (Perusahan Otomobil Nasional Berhad) started their very first business on May 7, 1983 and main in manufacture, sell motor vehicles and related products, which including spare parts accessories for vehicles and other components. As a very memorable history, the first car that produced by PROTON is Proton Saga (Appendix 1), which is launched on July 9, 1985. The original idea that conceived the Malaysia car is actually by a Malaysian, his name is Dato’ Seri Mahatir Mohamed, which is prime minister from Malaysia. The main office for Proton is in Shah Alam, with an area of 923 900 square metres and originally designed a capacity of 80 000 units per year. Moreover, the capacity has been increased to 230 000 units per year in 1997 and with the construction of medium value factory, which located next to the main office. Proudly to announce again, today, the...

Words: 2670 - Pages: 11

Premium Essay

Proton Supply Chain Challenges

...GLOBAL SUPPLY CHAIN Term Paper : Proton Supply Chain Challenges Table of Contents 1.0 Company Background 1-4 2.0 Problem Statement 5-7 3.0 Significant of Study 8-10 4.0 Proton Supply Chain Weaknesses 11-18 5.0 Recommendation 19-29 6.0 Conclusion 30 7.0 References 31-32 1.0) Company Background First national car, Proton Saga project was formed embark from the Look East Policy. Perusahaan Otomobil Nasional Sendirian Berhad (PROTON) was formed in 1983 as a company of national car to manage the operation of the national car project. "The Proton Saga is more than just a quality automobile. It is a symbol of Malaysians as a dignified people" quoted by Tun Mahathir Mohammad during the launched of the first model of national car, Proton Saga in 1985. Anyhow, PROTON facing the downfall when Perusahaan Otomobile Kedua Sendirian Berhad (PERODUA) launched in 1993, producing minicars and superminis models which target the different market segments as Proton. For example in 2002, Proton become the 1st of the car supplier in Malaysia, acquired 49.43% of the market share. Anyhow, in 2006, Perodua overtake Proton as the 1st car supplier in Malaysia with 42% of market share, and Proton was 10% behind it. This trend maintain consistently until latest statistic in 2011, Perodua still become the 1st supplier in Malaysia acquired 34% of the market share while Proton maintain the 2nd place with 33% market...

Words: 7705 - Pages: 31

Free Essay

A Study on Proton: Purchasing Decisions on Proton Cars Based on Consumers Purchasing Preferences

...Decisions on Proton Cars’. This study is dealing with Malaysian automobile industry. All Islamic countries hold its pride of producing automobiles by Malaysia. Proton Saga was the first ever which made Malaysia to obtain recognition worldwide for its impressive performance. This national project has progressed extensively merging with the United Kingdom’s well known automaker (Lotus International) in 1996 and the recent introduction of a new engine, the Campro (Rosli, 2006). In the year of 1984, National Car Project by PROTON was the second phase project of the development in the automotive industry. The development based of intellectual property of the industry and increment of technology level was the milestone of this project. The PROTON project, which was a joint-venture programme with Mitsubishi Motors Corporation of Japan, began its production with the PROTON Saga model in 1985 (Arshad & Iswalah, 2006). In the year of 1992, follow up of this success, Perusahaan Otomobil Kedua Sdn Bhd. (PERODUA) was launched. This success was the result of an agreement between UMW Corporation Sdn. Bhd., Med-Bumikar Mara Sdn. Bhd., Daihatsu Motor Co. Ltd of Japan, Mitsui & Co. Ltd of Japan, PNB Equity Resources Corporation Sdn. Bhd., and Daihatsu (Malaysia) Sdn. Bhd (Arshad & Iswalah, 2006). 1.2 Problem Statement Although Proton had gone through numerous achievements in the recent years, there are few talking points where it highlights the problems that Proton for the past...

Words: 10391 - Pages: 42