...------------------------------------------------- Week Six: Delivery of Human Services Part 1: Discuss, with your supervisor, your role in a crisis if one occurs at your agency or in the community during your field experience. What skills should you develop to ensure you are prepared to respond to a crisis? | At Mobile Mental Health Support Services there is a lot of information to gather about a client, there are no shortcuts when crisis occur in the agency or in the community. For example if a client comes into office for counseling session and is suicidal. The role of the Mobile Mental Health Support Services Counselor would be do a risk assessment, which requires directness, intentional questioning, and careful listening. The skills and conditions of the counselor is important to have empathy, reflection, restatements, and active listening skills. As the client is telling his or her story, the counselor should be listening effectively and looking for presence of risk factor and protective factors. Also remember information gathered should always be documented to have accurate record keeping of the session. | Part 2: Reflect on your personal experience during the sixth week at your agency. What positive and negative experiences did you have? | The sixth week at my intern I was able to do research on different Mental Health agencies throughout Las Vegas, and the services they provide. It was very informational to be able to research other agency, and see...
Words: 398 - Pages: 2
...EMM310 Assessment Item 2 Due: 15th October Length: 10 – 12 pages (Assessment marking criteria & Appendix 1 not included in page count) Measurement and Geometry A student: - makes, compares, sketches and names three-dimensional objects, including prisms, pyramids, cylinders, cones and spheres, and describes their features MA2-14MG | Working mathematically A student: - uses appropriate terminology to describe, and symbols to represent, mathematical ideas MA2-1WM - checks the accuracy of a statement and explains the reasoning used MA2-3WM | | Outcome/s | Lesson activities/ content | Prior knowledge | Relation to other strands | Other KLAs | Diverse learners | 1 | Measurement and GeometryMA2-14MG Working mathematically MA2-1WMMA2-3WM | - Revise 2D shapes- Find out prior knowledge of 3D objects – what do the students already know? Are there any misconceptions?- Using large versions of various 3D shapes, identify each object. Discuss the features of each shape e.g. faces, edges etc. - As a class, place the objects into groups based on similar features. Ensure students use reasoning for placing shapes into a certain group | - Students are already familiar with recognising and describing 3D shapes from stage 1 | Working mathematically MA2-1WM,MA2-3WM | EnglishEN2-1A | Visual Auditory/ linguistic | 2 | Measurement and GeometryMA2-14MG | - Discuss features of 3D shapes describing similarities and differences – focus on language e.g. faces, vertex, base, side...
Words: 3508 - Pages: 15
...A 12” x 12” x 2” sheet of EverFlex V34 Medium-Firm, EverFlex V44 Firm, DuraFlex D30 Medium-Firm, Latex Foam and Memory Foam were tested to see which was the best when it came to weight distribution. First, a sheet foam was placed on a blank table, followed by the Sensor Edge pressure sensor on top of it. The sensor was carefully placed so that the edges were not tucked under the foam, but were laid out. Then, a Barbie was placed in the center of the sensor, without letting any part of the doll fall over the edge. Three 2.5 lb. circular weights were put on top of the doll, where one weight had a slightly larger diameter than the other two. The weight with the largest diameter was put on top of the legs of the Barbie, where the front edge was lined up with her ankles and the back edge landed on her mid-thigh. The second weight was put on her upper body where the front edge reached her belly button and the back edge landed on her hairline. The last weight was put on top of the other two weights so if someone was looking into the center of its hole, they would be able to see her pelvic area. The three weights were positioned so that they were lined up with the center line of the Barbie’s body, so they would not tip over, touch the sensor, or cause an uneven force on the different sides of the doll’s body. If when placing the weights on top of the Barbie, one of the weights fell off and caused an impression in the foam, everything would be taken off the foam and after three minutes...
Words: 649 - Pages: 3
...WEEK 4 STATISTICAL ANALYSES To purchase this visit here: http://mindsblow.us/question_des/BSHS435WEEK4STATISTICALANALYSES/2786 Contact us at: help@mindblows.us BSHS 435 WEEK 4 STATISTICAL ANALYSES • Student selected a peer reviewed article from the library related to human services and statistical analysis. • Student discussed statistical analyses, including the following information: • Summarize in 100 to 150 words what the research study discussed in the article is about. (Provide a complete citation for the article using proper APA format.) • Discuss in 250 to 400 words the statistical analyses within the article. o Does the article incorporate graphs or tables that facilitate understanding of the data? o Are the descriptive statistical analyses appropriate for the subject? What descriptive statistics were used in the study? o Identify the inferential statistics used and comment if the analyses supported the research problem/hypothesis. (For example, do they support the conclusions reached by the author or authors? Are the statistics misleading or biased?). • The paper is 700 to 1,050 words in length. BSHS 435 WEEK 4 STATISTICAL ANALYSES To purchase this visit here: http://mindsblow.us/question_des/BSHS435WEEK4STATISTICALANALYSES/2786 Contact us at: help@mindblows.us BSHS 435 WEEK 4 STATISTICAL ANALYSES • Student selected a peer reviewed article from the library related to human services and statistical analysis. • Student discussed statistical analyses...
Words: 1345 - Pages: 6
...An Efficient Connection between Statistical Software and Database Management System Sunghae Jun Department of Statistics, Cheongju University Chungbuk 360-764 Korea ABSTRACT In big data era, we need to manipulate and analyze the big data. For the first step of big data manipulation, we can consider traditional database management system. To discover novel knowledge from the big data environment, we should analyze the big data. Many statistical methods have been applied to big data analysis, and most works of statistical analysis are dependent on diverse statistical software such as SAS, SPSS, or R project. In addition, a considerable portion of big data is stored in diverse database systems. But, the data types of general statistical software are different from the database systems such as Oracle, or MySQL. So, many approaches to connect statistical software to database management system (DBMS) were introduced. In this paper, we study on an efficient connection between the statistical software and DBMS. To show our performance, we carry out a case study using real application. Keywords Statistical software, Database management system, Big data analysis, Database connection, MySQL, R project. 1. INTRODUCTION Every day, huge data are created from diverse fields, and stored in computer systems. These big data are extremely large and complex [1]. So, it is very difficult to manage and analyze them. But, big data analysis is important issue in many fields...
Words: 2685 - Pages: 11
...trademarks or registered trademarks of their respective companies. Use of these marks is not intended to imply endorsement, sponsorship, or affiliation. Edited in accordance with University of Phoenix® editorial standards and practices. Course Description This course prepares graduate students to apply statistics and probability concepts to business decisions in organizations that focus on process improvement. Students learn criteria for developing effective research questions, including the creation of appropriate sampling populations and instruments. Other topics include descriptive statistics, probability concepts, confidence intervals, sampling designs, data collection, and data analysis—including parametric and nonparametric tests of hypothesis and regression analysis. Policies Students/learners will be held responsible for understanding and adhering to all policies contained within the following document: University policies: You must be logged into the student website to view this document. University policies are subject to change. Be sure to read the policies at the beginning of each class. Policies may be slightly different depending on the modality in which you attend class. If you have recently changed modalities, read...
Words: 2122 - Pages: 9
...Fin 700 Tianqi Sun Dr. Al. Barzykowsi Dec. 19, 2015 Short Paper - Statistical Methods This paper talks about statistical methods. Statistical data indicates that the agency 's approach is characterized by its population by inference Presented from a representative sample of the population views. As scientists rarely observed throughout Crowd, sampling and statistical inference is essential. This paper discusses some of the general principles Visualization of planning experiments and data. Then, a strong focus on the appropriate choice Standard statistical models and statistical inference methods. First of all, the Standard Model described. These models, in order to apply interval estimation and hypothesis testing parameters Also described, including the next two sample cases, when the purpose of comparing two or more of the population For their means and variances. Secondly, non-parametric inference tests are also described in the case where the data Sample distribution is not compatible with standard parameter distribution. Thirdly, using multiple resampling methods Computer -generated random sample finally introduced the characteristics of the distribution and estimate Statistical inference. The method of multivariate data processing of the following sections involved. method Clinical trials also briefly review process. Finally, the last section of statistical computer software discussion And through the collection of citations to adapt to different levels of expertise...
Words: 702 - Pages: 3
...BSHS 435 WEEK 4 STATISTICAL ANALYSES TO purchase this tutorial visit following link: http://wiseamerican.us/product/bshs-435-week-4-statistical-analyses/ Contact us at: SUPPORT@WISEAMERICAN.US BSHS 435 WEEK 4 STATISTICAL ANALYSES • Student selected a peer reviewed article from the library related to human services and statistical analysis. • Student discussed statistical analyses, including the following information: • Summarize in 100 to 150 words what the research study discussed in the article is about. (Provide a complete citation for the article using proper APA format.) • Discuss in 250 to 400 words the statistical analyses within the article. o Does the article incorporate graphs or tables that facilitate understanding of the data? o Are the descriptive statistical analyses appropriate for the subject? What descriptive statistics were used in the study? o Identify the inferential statistics used and comment if the analyses supported the research problem/hypothesis. (For example, do they support the conclusions reached by the author or authors? Are the statistics misleading or biased?). • The paper is 700 to 1,050 words in length. BSHS 435 WEEK 4 STATISTICAL ANALYSES • Student selected a peer reviewed article from the library related to human services and statistical analysis. • Student discussed statistical analyses, including the following information: • Summarize in 100 to 150 words what the research study discussed in the article is about. (Provide a...
Words: 468 - Pages: 2
...Human Services Research Article Discussion Wendy Coghill BSHS/382 September 29, 2014 University of Phoenix Instructor Jaime Primiano Human Services Research Article Discussion The following paper will address the findings of the author on the topic of discussing Human Services scholarly research articles/journals found inside the University Library that included some statistical analysis. The article had to be at least ten to thirty pages long, and must be of interest to the author. The assignment then required that the presentation be formatted clearly, and that the content must be sound, meaning adhering to APA guidelines as well as expressing the ideas and bias reduction in language of the content. The contents of this paper will touch on the statistical part of the paper chosen from a scholarly source, and discuss whether or not the paper supported the conclusions it drew through statistical analysis as well as the state of the content, meaning was it biased or misleading in any way. Potential Link between Obesity, Age and Socioeconomic Status The paper chosen for this assignment focuses on analysis that uses data from the National Longitudinal Survey of Youth (NLSY) to explore how body weight and obesity change as a person progresses in age. The presentation of the material is stylistically sound in which it meets proper APA standards language bias, and expressing ideas, the content is formatted clearly...
Words: 643 - Pages: 3
...Project is to provide of in depth learning in the area of specialization. This project is more focused on the students chosen area as a specialization and wants to have career. It should facilitate the student to have a deeper understanding in his/her specialization. Details of Specialization Project The Specialization project should be done by every student as a part of their course which carries 100 marks and will be included in the marks sheet. This project provides an opportunity to get more insights on the topic chosen by the student. In the process, the student will get a chance to (a) evaluate the applicability of the textbook theories in real time situations and (b) to analyze the performance of entities and markets using statistical and analytical methods. The project should be focused to the specialization the student opted during the course. The project will be completed in five phases Phase I: The student has to be thorough with the conceptual details specific to his/her topic. It needs extensive reading on the topic from specialized books. The articles from outstanding journals can be referred to know the contemporary details of...
Words: 2237 - Pages: 9
...greatly improved the paper. Our thanks also to seminars at Clark, Iowa State, Harvard, Houston, Indiana, and Kansas State universities, at Williatns College, and at the universities of Virginia and Iowa. A colleague at Iowa, Calvin Siehert, was materially helpful. T cant for science or policy and yet be insignificant statistically, ignored by the less thoughtful researchers. In the 1930s Jerzy Neyman and Egon S. Pearson, and then more explicitly Abraham Wald, argued that actual investigations should depend on substantive not merely statistical significance. In 1933 Neyman and Pearson wrote of type I and type II errors: HE IDEA OF Statistical significance is old, as old as Cicero writing on forecasts (Cicero, De Divinatione, 1. xiii. 23). In 1773 Laplace used it to test whether comets came from outside the solar system (Elizabeth Scott 1953, p. 20). The first use of the very word "significance" in a statistical context seems to be John Venn's, in 1888, speaking of differences expressed in units of probable error; Is it more serious to convict an innocent man or to acquit a guilty? That will depend on the consequences of the error; is the punishment death or fine; what is the danger to the community of released criminals; what are the current ethical views on punishment? From the point of view of mathematical theory all that we can do is to show how the risk of errors may be controlled and minimised. The use of these statistical tools in any given...
Words: 10019 - Pages: 41
...of appropriate sampling populations and instruments. Other topics include descriptive statistics, probability concepts, confidence intervals, sampling designs, data collection, and data analysis – including parametric and nonparametric tests of hypothesis and regression analysis. Cooper, D.R., & Schindler, P.S. (2006). Business research methods (9th ed.). Boston, MA: McGraw-Hill/Irwin. Lind, D. A., Marchal, W. G., & Wathen, S. A. (2008). Statistical techniques in business and economics (13th ed.). Boston, MA: McGraw-Hill/Irwin. All electronic materials are available on the student website. |Week One: Descriptive Statistics and Probability Distributions | | |Details |Due |Points | |Objectives |Compute descriptive statistics for given data sets. | | | | |Apply probability concepts related to discrete and continuous probability. | | | |Readings |Read Ch. 3, 5, 6, & 7 of Statistical Techniques in Business & Economics. | | | | |Read materials on the student website ...
Words: 2342 - Pages: 10
...turn would be beneficial for a lot of other players in the market. For some companies, it creates a monopoly in the market and for some others, it causes complete downfall. Here we examine five very diverse papers written on five important players in any economy and analyze whether the writers are correct in their assessment of these factors. The five facets examined in these papers are Optimal Tax Policies, Foreign Exchange Rates, Global Energy Prices, Monetary Policies of Banks and The role of Productivity in Economic Growth. Various Facets of Global Economy In today’s world, economy is one of the most talked about point everywhere in the world. Every single politician, industrialist, worker and even students have their own take on what should be done in order to improve the great depression it seems we are in. Unemployment may have seem to have decreased in the United States, but it is still lagging behind many other major economies all around the world. It is important for every common man to understand the various factors that play a part in economic growth or downturn. The first factor is determining the optimal tax policy. Abuselidze (2013) analyzes how far an optimal tax policy goes towards strengthening the macroeconomic stabilization. His analysis provides a great insight into why forming a perfect tax code that pleases everyone is so difficult. Obama and McCain had so many...
Words: 1028 - Pages: 5
...Term Paper Guideline STAT 500 Length: Less than 1500 words Format: Cleanly typed Students are required to write an article describing a statistical method that will solve a business or management problem; or an creative approach that mainly rely on statistical methods that would advance the current practice. The statistical method involved may or may not relate to statistical concepts or methods covered in the course. Students are encouraged to conduct their own literature research. Information collected from books, magazines or newspapers are acceptable, including any of those found in UNVA’s eLibrary. Students could invent their own practical and feasible solutions to some real issues they experience in their work, though not required. The article should describe well the background of the problem and each of the steps in solving the problem. The length of the article should be within 1500 words; visual aids, such as tables, charts, graphs should be included where necessary. Some business statistics applications example include • Select profitable stocks • Detect fraudulent claims • Score an applicant’s credit • Discover cross-selling opportunities for products • Quantify drug efficacy • Forecast new product sales • Discover new customers • Recognize objects in images • Verify identity through biometrics; and • Anticipate shifts in market sectors for hedge funds • Set individual...
Words: 430 - Pages: 2
...1. Analysis of Research Report Paper Mary Ellen Strout HCS/438 Ann Impen April 11, 2011 2. Analysis of a Research Report Paper The article I chose was from the Annals of Surgery, called Multivariate Analysis of Risk Factors for Death Following Gastric Bypass for Treatment. I chose this article, because I did have this surgery done with no complications, and it is also a fascinating procedure and hope to one day work in this area. Pre operative mortality is the most feared outcome of bariatric surgery, it is reported to happen between 0.5 ad 1.5% of patients. In this article it identifies mortality fore either open or laparoscopic Roux-en-y bypass. The database is from Virginia Commonwealth university and was queried for patients who had undergone either an open gastric bypass (O-GBP) or a laparoscopic gastric bypass (L-GBP). A multivariate logistic regression analysis to identify factors related to perioperative mortality was performed. The factors examined included was age, gender, body mass index, preoperative weight, hypertension, diabetes mellitus, sleep apnea, obesity hypoventilation syndrome, venous 3. Analysis of a Research Report Article stasis ulcers, intestinal leak, small bowel obstruction, and pulmonary embolus. The data was found to find independent factors related to early death. Early death was defined as death that occurs within 30 days of the initial procedure or as a direct result of a complication of the original procedure (Annals...
Words: 1164 - Pages: 5
