...distributed by the National Institute for Engineering Ethics Murdough Center for Engineering Professionalism Edward Whitacre College of Engineering Texas Tech University, Lubbock, Texas [pic] Copyright © 2010 Henry’s Daughters is designed to raise awareness of the ethical aspects of engineering work, advance knowledge and understanding of professional standards and public obligations and expectations, improve skills in moral reasoning, and strengthen personal dedication to exemplary conduct. Henry’s Daughters is dedicated to the memory of E. D. “Dave” Dorchester, P.E. Past President, National Institute for Engineering Ethics; Past President, Texas Society of Professional Engineers Past Chair, Texas Board of Professional Engineers; Distinguished Life Member, NIEE Executive Board Dave was highly influential in promoting NIEE and Murdough Center ethics programs. In 1989, he established the Professional Development Program of the Texas Board of Professional Engineers. As NIEE President, Dave worked with Dean Bill Marcy to bring NIEE to Texas Tech University. and E. Walter LeFevre, Ph.D., P.E. Past President, National Society of Professional Engineers; Fellow, National Society of Professional Engineers Past Director, Vice President and Fellow, ASCE; Past President, Arkansas Professional Engineers Board; Distinguished Life Member, NIEE Executive Board Walt was the longest standing member of NIEE. He appointed the current NIEE director to the original...
Words: 4453 - Pages: 18
...Vaidyanathan, Department of Engineering Technology, College of Engineering Department: Department of Engineering Technology, College of Engineering, & Honors College According to the Goal 2 Bio: Christian Winter was born in Frankfurt–Oder, Germany, and moved to the United States in 2002. He is currently pursuing a Bachelor of Science degree in Electronics Engineering Technology at the University of North Texas in Denton. Winter is a member of the Institute of Electrical and Electronics Engineers (IEEE) student branch at UNT, currently serving as the chairperson. He is also a member of the UNT Honors College, Tau Alpha Pi, Phi Kappa Phi, and the Golden Key International Honor Society. He was chosen for Who’s Who Among Students at American Colleges and Universities in 2004–2005. Winter received the Outstanding Electronics Engineering Student Award for the 2004–2005 academic year. On graduation, Winter plans to pursue a Master of Science in Electrical Engineering at the University of Texas at Dallas. He currently works as an engineering intern at Sanmina-SCI in Allen, Texas. According to the Goal 3 Abstract: Eliyahu Goldratt’s Theory of Constraints has helped companies around the world improve their profit margins by effectively managing business processes. Goldratt first introduced his theory in 1984 in the book, The Goal: A Process of Ongoing Improvement. This essay summarizes Goldratt’s book and explains the business model he proposes. The model is expanded in his later...
Words: 3612 - Pages: 15
...Vaidyanathan, Department of Engineering Technology, College of Engineering Department: Department of Engineering Technology, College of Engineering, & Honors College According to the Goal 2 Bio: Christian Winter was born in Frankfurt–Oder, Germany, and moved to the United States in 2002. He is currently pursuing a Bachelor of Science degree in Electronics Engineering Technology at the University of North Texas in Denton. Winter is a member of the Institute of Electrical and Electronics Engineers (IEEE) student branch at UNT, currently serving as the chairperson. He is also a member of the UNT Honors College, Tau Alpha Pi, Phi Kappa Phi, and the Golden Key International Honor Society. He was chosen for Who’s Who Among Students at American Colleges and Universities in 2004–2005. Winter received the Outstanding Electronics Engineering Student Award for the 2004–2005 academic year. On graduation, Winter plans to pursue a Master of Science in Electrical Engineering at the University of Texas at Dallas. He currently works as an engineering intern at Sanmina-SCI in Allen, Texas. According to the Goal 3 Abstract: Eliyahu Goldratt’s Theory of Constraints has helped companies around the world improve their profit margins by effectively managing business processes. Goldratt first introduced his theory in 1984 in the book, The Goal: A Process of Ongoing Improvement. This essay summarizes Goldratt’s book and explains the business model he proposes. The model is expanded in his later...
Words: 3612 - Pages: 15
...Invest in your most valuable asset Master of Science - Technology Programs for Working Professionals We can reach our potential, but to do so, we must reach within ourselves. We must summon the strength, the will, and the faith to move forward - to be bold - to invest in our future. John Hoeven Governer - North Dakota The World of Manipal Manipal University is widely recognized for imparting high quality professional education. Founded 57 years ago by Dr. T. M. A. Pai, Manipal University is located in the bustling student town of Manipal (in Karnataka). Manipal University was the first institute to be recognized as a Deemed University by the Government of India in 1993. Manipal University offers programs in Medicine, Dentistry, Engineering, Nursing, Allied Health, Pharmacy, Life Sciences, Management, Mass Communication, Information Sciences, Hotel Management, Regenerative Medicine and many more. India's top ranked institutions, including Manipal Institute of Technology (MIT) and the Kasturba Medical College (KMC) are part of Manipal University. These colleges have consistently been rated among India's top 10 institutions, in their respective fields, in different surveys over the last few decades. Manipal has come to be recognized for its excellence in Medical and Engineering programs and continuing education in the areas of IT, Semiconductor, Mechanical, Chemical, Management and Healthcare for employed professionals. In its endeavor to provide Continuing Education...
Words: 8725 - Pages: 35
...Diploma of MECHANICAL ENGINEERING TECHNOLOGY COMMENCEMENT DATE: 8 February 2010 Take your existing skills in mechanical engineering or industrial technology and boost your career with practical knowledge of the latest technologies in this fast growing but critical field Ensure you and your company remain at the forefront of Mechanical Engineering Technology Through innovative e-learning participate from your home, office or facility WHAT YOU WILL GAIN: • Skills and know-how in the latest technologies in mechanical engineering technology • Hard hitting know-how in pumps, compressors, piping, seals and machinery safety • Guidance from experts in the field of mechanical engineering technology • Networking contacts in the industry • Improved career prospects and income • A world recognised IDC Advanced Diploma in Mechanical Engineering Technology Technology Training that Works AUSTRALIA • CANADA • INDIA IRELAND • MALAYSIA • NEW ZEALAND POLAND • SINGAPORE • SOUTH AFRICA UNITED KINGDOM • UNITED STATES • VIETNAM Download the detailed prospectus here: www.idc-online.com/e_learning/dmeprospectus.pdf INTRODUCTION Gain deep and broad skills by undertaking this advanced diploma in mechanical engineering technology - focusing on real, practical systems. Embrace a well paid, intensive yet enjoyable career by taking this comprehensive and practical course, delivered by live distance learning and presented by outstanding mechanical engineering instructors located throughout the...
Words: 13537 - Pages: 55
...Engineering: An Introduction for High School Annapurna Ganesh Chell Roberts Dale Baker Darryl Morrell Janel White-Taylor Stephen Krause Tirupalavanam G. Ganesh Say Thanks to the Authors Click http://www.ck12.org/saythanks (No sign in required) www.ck12.org iii To access a customizable version of this book, as well as other interactive content, visit www.ck12.org CK-12 Foundation is a non-profit organization with a mission to reduce the cost of textbook materials for the K-12 market both in the U.S. and worldwide. Using an open-content, web-based collaborative model termed the FlexBook®, CK-12 intends to pioneer the generation and distribution of high-quality educational content that will serve both as core text as well as provide an adaptive environment for learning, powered through the FlexBook Platform®. Copyright © 2011 CK-12 Foundation, www.ck12.org The names “CK-12” and “CK12” and associated logos and the terms “FlexBook®”, and “FlexBook Platform®”, (collectively “CK-12 Marks”) are trademarks and service marks of CK-12 Foundation and are protected by federal, state and international laws. Any form of reproduction of this book in any format or medium, in whole or in sections must include the referral attribution link http://www.ck12.org/saythanks (placed in a visible location) in addition to the following terms. Except as otherwise noted, all CK-12 Content (including CK-12 Curriculum Material) is made available to Users in accordance with the Creative Commons...
Words: 61128 - Pages: 245
...Offshore Employment Handbook The Time-Saving “Getting Started” Guide for Finding Offshore Oil, Gas & Energy Jobs WE STRONGLY RECOMMEND TO SAVE THIS DOCUMENT ONTO YOUR HARD DISC NOW!!! Offshore Employment Kit…2 How to Avoid Offshore Oil Job Scams..................................................................... 5 Living the Offshore Life ......................................................................................... 10 Glossary of oilfield terms ....................................................................................... 12 Frequently asked questions about the offshore industries ........................................ 14 Nature of the oil industry ....................................................................................... 16 working conditions ................................................................................................ 19 Employment .......................................................................................................... 20 Occupations in the Industry.................................................................................... 20 Training and Advancement..................................................................................... 22 Earnings ................................................................................................................ 23 Outlook ......................................................................................................
Words: 33356 - Pages: 134
...MULTI-SKILLING BARRIERS IN THE CONSTRUCTION INDUSTRY IN NORTH-WESTERN NIGERIA Nasiru Adamu1, Mohammed Hassan Nensok2 and Adefemi Aka3 Department of Quantity Surveying, Waziri Umaru Federal Polytechnic, Birnin Kebbi. Nigeria Department of Building, Waziri Umaru Federal Polytechnic, Birnin Kebbi, Nigeria The need to improve productivity and cost effectiveness has made some companies to adopt a multi-skilling labour strategy where workers can work across their traditional occupational boundaries. The study assessed the problems and barriers of multiskilling using a cross-sectional survey of construction workers in some selected cities in north-western Nigeria. Descriptive statistics was used in the analysis. Results show that lack of training and limit on human skill retention by workers are among the major barriers of multi-skilling. It was concluded that multi-skilling can lead to improved productivity and cost effectiveness if these barriers are minimised. It was recommended that construction companies should provide adequate training for their workers so that they can be multi-skilled. Keywords: construction industry, multi-skilling, productivity INTRODUCTION Two of the most critical challenges facing the construction industry are the limited availability of skilled labour and the increasing need for productivity and cost effectiveness (Hegazy et al. 2000). One potential solution already being used by some companies is multiskilling (Dada and Ekpe, 2006). It is argued...
Words: 7383 - Pages: 30
...PROCEEDINGS of the 3rd Christian Engineering Education Conference June 23-25, 1999 at the JAARS Facility of Wycliffe Bible Translators Waxhaw, North Carolina The Mission of Christian College Engineering Programs for Y2K and Beyond Preface THE FIRST CHRISTIAN ENGINEERING EDUCATION CONFERENCE WAS HELD IN 1992 AT CALVIN COLLEGE IN GRAND RAPIDS, MICHIGAN. SEVERAL YEARS LATER, TTHE SECOND CONFERENCE WAS HELD IN 1996 AT MESSIAH COLLEGE, IN GRANTHAM, PENNSYLVANIA. THE 1999 CHRISTIAN ENGINEERING EDUCATION CONFERENCE BROUGHT TOGETHER A DIVERSE GROUP OF DEDICATED CHRISTIAN ENGINEERS. IT WAS A DISTINCT PLEASURE TO HEAR THE WONDERFUL WAYS GOD IS WORKING IN THE VARIOUS PROGRAMS AND SCHOOLS REPRESENTED AT OUR MEETING. THE JUNGLE AVIATION AND RADIO SERVICE (JAARS) FACILITY OF WYCLIFFE WAS A FANTASTIC LOCATION FOR OUR CONFERENCE, AND WE ARE VERY THANKFUL TO OUR GRACIOUS HOSTS. A SPECIAL THANKS GOES TO CAROL WEAVER, THE JAARS CONFERENCE COORDINATOR. The goal of these conferences is to glorify God, to foster community among Christian engineering educators, and to encourage and challenge each other in our work of kingdom building. Abraham Kuyper, one of the great thinkers within the Reformed tradition of Christianity, has said that there is not one square centimeter of the creation that is not claimed by Christ. As Christian engineering educators of whatever tradition, we seek to stake that claim in our discipline, exploring how...
Words: 29247 - Pages: 117
...Ship Design and Construction Written by an International Group of Authorities Thomas Lamb, Editor Volume II Y OF NA IET VA C O L CHITECT AR S & RINE E NG MA I The Society of Naval Architects and Marine Engineers 601 Pavonia Avenue • Jersey City, NJ • 07306 THE ERS S NE • Published in 2004 by Copyright © 2004 The Society of Naval Architects and Marine Engineers. ISBN 0-939773-41-4 The opinions or assertions of the authors herein are not to be construed as official or reflecting the views of SNAME. It is understood and agreed that nothing expressed herein is intended or shall be construed to give any person, firm, or corporation any right, remedy, or claim against SNAME or any of its officers or members. Design by Andrew MacBride. Printed in the United States of America by Sheridan Books. Contents Acknowledgments ix xv Author Biographies for Volume II Chapter 27 Multipurpose Cargo Ships 27.1 Description 27-1 27.4 References 27-35 Horst Linde, Berlin University of Technology, Faculty of Transport Technology, Institute of Land and Sea Transport, Germany 27.2 Design Issues 27-28 27.3 Ship Characteristics 27-35 Chapter 28 Reefer Ships Allan M. Friis, The Technical University of Denmark, Denmark 28.3 Design Issues 28-26 28.1 Description 28-1 28.2 System Design 28-8 28.4 Ship Characteristics 28-27 Chapter 29 Oil Tankers Michael Osborne, Shell International Trading and Shipping, UK, and R. Keith Michel, Herbert Engineering...
Words: 11349 - Pages: 46
...The grid operaTor, power MarkeT & prices under Texas eLecTric dereguLaTion ERCOT THE GRID OPERATOR, POWER MARKET & PRICES UNDER TEXAS ELECTRIC DEREGULATION THE STORY OF FEBRUARY 2011 A SPECIAL RESEARCH PROJECT BY THE STEERING COMMITTEE OF CITIES SERVED BY ONCOR & THE TEXAS COALITION FOR AFFORDABLE POWER The sTory of ercoT AMARILLO LUBBOCK PLANO FORT WORTH ABILENE MIDLAND/ODESSA WACO DALLAS ALPINE AUSTIN HOUSTON SAN ANTONIO CORPUS CHRISTI LAREDO THE ERCOT REGION The grid operaTor, power MarkeT & prices under Texas eLecTric dereguLaTion THE STORY OF ERCOT ABOUT THIS REPORT The Electric Reliability Council of Texas, also known as ERCOT, is the non-profit corporation that oversees the Texas power grid. The organization also has responsibility for settling transactions in the state’s wholesale spot market for electricity. But the term “ERCOT” also is used loosely in other ways. For instance, the term can describe the geographical footprint for retail electric deregulation in Texas. It is also sometimes used to describe the state’s wholesale energy market. This report touches upon policy questions relating to all these conceptualizations of ERCOT: as an organization, as an energy market, and as the area of Texas with competitive electric suppliers. To distinguish between these meanings, the term “ERCOT” will be used whenever practicable to refer to the organization, “the ERCOT region” will be used to refer to deregulated areas of the state...
Words: 40863 - Pages: 164
...John Paul G. Cordova ME2-1 “Today’s Computers: How Did They Evolve?” I. Introduction A. Background of the Topic - The topic, entitled “Today’s Computers: How Did They Evolve?”, just like the life of a person, also has its own backgrounds, from the simplest form to its complex form. In other words, computers of today have their own histories. As I continue this term paper, you will be discovering the history behind the evolution of computers. B. Importance of the Topic - This topic is important to be known by the community because computers are very useful nowadays. As a student, knowing the story behind the evolution of computers is important in order for me to understand the computers more efficiently. For teachers, it is also important for them to know the history behind the evolution of computers because they also use computers in order to finish their jobs more accurately, making them aware of the computer’s history. II. Body of the Document A. Evolution of Computer in the late 16th century, the 18th century, and the early 19th century: 1. “Abacus was the first counting device, which is originally made from Asia. It worked on a place-value notion meaning that the place of a bead or rock on the apparatus determined how much it was worth. During the 1660s, John Napier discovered logarithms. Robert Bissaker invented the slide rule which will remain in popular...
Words: 14119 - Pages: 57
...Susan Walsh Sanderson Lally School of Management Rensselaer Polytechnic Institute Troy, New York 12180 Phone: 518-276-2933 Fax: 518-276-8661 Email:sandes@rpi.edu May, 2008 CURRENT POSITION ASSOCIATE PROFESSOR (with tenure). School of Management Rensselaer Polytechnic Institute, Affiliate of Sloan Foundation Industry Studies Centers Major Interests: • Innovation Management • Product Design, Marketing and Brand Management • Innovative Teaching Approaches (Multimedia Enhanced on campus and Distance Learning) AWARDS 1995 Boeing Outstanding Educator Award Hesburg Award Team (for Educational Innovation) In 1995, I was a co-recipient of the Boeing Outstanding Educator Award and a member of the team receiving the Hesburg Award for Educational Innovation TEACHING Teaching Role. My recent teaching has been in Rensselaer’s resident MBA program (both full and parttime), Professional and Distance Education Program and undergraduate programs. My research and teaching have made important contributions to efforts to build the marketing and management and technology curricula in the School of Management at Rensselaer and at other universities who have adopted our teaching materials. As a pioneer in interactive leaning material on product development and manufacturing, I have developed several interactive multimedia cases and collaborated on the development of simulations designed to teach marketing principles and bridge management and engineering disciplines. The simulations teach marketing...
Words: 9701 - Pages: 39
...ENGINEERING ETHICS Concepts and Cases This page intentionally left blank F O U R T H ENGINEERING ETHICS Concepts and Cases g E D I T I O N CHARLES E. HARRIS Texas A&M University MICHAEL S. PRITCHARD Western Michigan University MICHAEL J. RABINS Texas A&M University Australia • Brazil • Japan • Korea • Mexico • Singapore • Spain • United Kingdom • United States Engineering Ethics: Concepts and Cases, Fourth Edition Charles E. Harris, Michael S. Pritchard, and Michael J. Rabins Acquisitions Editor: Worth Hawes Assistant Editor: Sarah Perkins Editorial Assistant: Daniel Vivacqua Technology Project Manager: Diane Akerman Marketing Manager: Christina Shea Marketing Assistant: Mary Anne Payumo Marketing Communications Manager: Tami Strang Project Manager, Editorial Production: Matt Ballantyne Creative Director: Rob Hugel Art Director: Cate Barr Print Buyer: Paula Vang Permissions Editor: Mardell Glinski-Schultz Production Service: Aaron Downey, Matrix Productions Inc. Copy Editor: Dan Hays Cover Designer: RHDG/Tim Heraldo Cover Image: SuperStock/Henry Beeker Compositor: International Typesetting and Composition c 2009, 2005 Wadsworth, Cengage Learning ALL RIGHTS RESERVED. No part of this work covered by the copyright herein may be reproduced, transmitted, stored, or used in any form or by any means graphic, electronic, or mechanical, including but not limited to photocopying, recording, scanning, digitizing, taping, Web distribution,...
Words: 48169 - Pages: 193
...flawlessly when they demonstrated the interpreter to MITS in Albuquerque, New Mexico in March 1975; MITS agreed to distribute it, marketing it as Altair BASIC.[3] They officially established Microsoft on April 4, 1975, with Gates as the CEO.[4] In August 1977 the company formed an agreement with ASCII Magazine in Japan, resulting in its first international office, "ASCII Microsoft".[5] The company moved to a new home in Bellevue, Washington in January 1979.[4] Microsoft entered the OS business in 1980 with its own version of Unix, called Xenix.[6] However, it was DOS (Disk Operating System) that solidified the company's dominance. After negotiations with Digital Research failed, IBM awarded a contract to Microsoft to provide a version of the CP/M...
Words: 11094 - Pages: 45
