Premium Essay

Three Phase

In:

Submitted By MOSERICKAL
Words 728
Pages 3
PHASE THREE
Name
Tutor
Institution
Course
Date

The security survey conducted is very significant to the risks which are being considered, the protection and the budget issues that need attention. The purpose is to identify present risks at the physicality of the area and thus make efficient recommendations to the reduction of a cost effective project. The following inspection questions and answers guided in the checking of the security at hand.

PHYSICAL SURVEY QUERIES

1. Where is the plant located? It is located at Richmond site

2. Is there any delivery yard? Yes

3. If yes, are there any transportation services? Yes three delivery yards in Kentucky that provides transportation as well.

4. Is there any supply yard for concrete materials? Yes

5. Is there any delivery yard also? Yes there is one where pre cast items are kept

6. Is the delivery yard protected? Yes

7. If yes what type of protection? It is protected by a barbed wire fence

8. Is the protection under 24 hour check system? Yes

9. Does the company deliver materials to the specified place? Yes

10. Are the buildings constructed more 80,000- square feet in terms of space? Yes about 84,000 square feet

11. Are the buildings large enough to accommodate many offices? Yes

12. Will it be a storey building? Yes, the buildings will consist 3-storeys

13. Are the two towers made of concrete? Yes

14. If yes, does the concrete structure contain brick precast panels? Yes

15. Do the buildings have curtain walls? Yes

16. If yes, are they attractive?

17. Are the buildings in a clear location? Yes

18. If yes, does the clear location provide a magnificent view to the surroundings? Yes

19. Are the buildings away from other buildings? Yes indicating security will be ample.

20. Is the building composed of any light manufacturing? Yes

21. If yes, is the

Similar Documents

Premium Essay

Applied Research Technologies

...product. Management venture, stage, and industry: The management exemplified a team that was right for this venture. Peter Vyas possessed knowledge by realizing the need and purpose for this project. Although, he had experienced two failed junctures in hopes of introducing the RIMOS idea but he was determined to resolved the kinks which contributed to his previous failures. Despite the pressure and uncertainty of his job depending on the outcome of the third generation product, he was passionate and knowledgeable about his innovative product and refused to give up on the idea. Cynthia Jackson also played an elaborate managerial role with this particular unit. In an effort to improve on the unit production performances, she presented a three phase blue-print in hopes of creating a more disciplined and prepared...

Words: 580 - Pages: 3

Premium Essay

Phase Three Sales Plan

...Running Head: SALES PLAN: PHASE TWO Sales Plan: Phase Two May 10, 2010 Sales Plan: Phase Two Apple has become one of the most successful cell phone providers since releasing the iPhone in 2007 (Apple, n.d.). This product is revolutionizing the cellular phone industry in ways that no other product could ever do. But like any product, the iPhone must continue to grow to stay ahead of the competition and always to increase sales. One way to do this is preparing a sales plan that can keep the product successful and increase the products revenues as it goes forward. As vice president of sales for Apple (Apple, n.d.), it is incumbent upon Team B to implement such a plan. Topics covered include outlining where the product is in the product life cycle, an environmental scan, situation analysis, and a SWOTT analysis. Other topics to include are sales goals, strategic plans, tactics, a budget, and measurement tools. By providing this data, Team B will ensure a successful sales plan that will not only maintain the products current success but also provide it with a very bright future to keep sustainability high. A discussion of the executive summary follows. Executive Summary The Apple iPhone is by far the most advanced and successful phone on the market today. It set the standard for smartphones and left the competition far behind with the features and applications it offers. Between all the applications available for download, the easy access to voicemail and an...

Words: 6279 - Pages: 26

Premium Essay

Three Phase Induction Machine

...Introduction The three-phase induction machine is the most widely used rotating machines. An induction machine offers an almost constant speed within its normal operating range when operated off a constant-voltage, constant-frequency, and electric power source. Economically, the cost of purchasing these machines can be considered very low, and they require little maintenance. However, controlling the speed of this type of machine is difficult and can be considered very expensive. In this paper, several topics related to the squirrel cage rotor, working principles, speed control, as well as simple examples will be discussed. Squirrel Cage Rotor Construction: Squirrel cage rotor is considered as an example of a...

Words: 1079 - Pages: 5

Premium Essay

Concord Bookshop Paper

...Phases of Organizational Change: Concord Bookshop Conflict University of Phoenix Phases of Organizational Change: Concord Bookshop Conflict Organizational change is a never-ending process. Knowing how to approach, present, and effectively implement change depends on several factors. The three phases of Lewin’s Force Field Model: unfreezing, change, and refreezing allow the change process to take place (Borkowski, 2005). Using these phases change can be presented, discussed, and ultimately implemented with success. For organizations to continue to grow and become ever more prosperous, change has to be continuously refined. In this paper, a brief discussion of the phases of organizational change as well as an examination of the organizational change processes not implemented in the Concord Bookshop conflict will be conducted. Lewin’s Phases of Organizational Change Unfreezing Borkowski (2005) states, “The forces and workers involved in perpetuating resistance acquire an understanding of variances that exist between current practices and behavior and desired activities and behavior” (pp. 384-385). The organization must perform an investigation to see what type of resisting forces they may face in regard to the proposed change. An organization will not be effective in creating change unless motivation within the organization is manifested. Understanding that change requires some new knowledge to be learned and some old knowledge to be unlearned. This fact is...

Words: 930 - Pages: 4

Premium Essay

Refrigeration

...Chapter 17 Lab 1. When an alternationg current is applied to the running windings of a split-phase electric motor, and alternating current: A) with the same polarity is induced in the rotor. B) with reverse polarity is induced in the rotor. C) with the same polarity is induced in the start winding. D) circuit to the start winding is opened by the electronic relay. 2. A two-pole split-phase motor operates at a speed just under: A) 1800 rpm B) 3600 rpm C) 4800 rpm D) 5200 rpm 3. A four-pole split-phase motor runs ______________ a two-pole split-phase motor. A) faster than B) at the same speed as C) slower than 4. A three-phase power supply can be found in most: A) homes B) factories C) mobile homes D) recreational vehicles 5. The electronic relay is used with some electric motors to: A) provide current to the start windings. B) relay current to the start capacitor C) provide current to the run capacitor D) open the circuit to the start windings after the motor has started 6. The amount by which the current leads or lags the voltage in an alternating current circuit is know as the: A) phase angle B) electronic relay C) inductive angle D) starting torque 7. In an alternating current circuit in which there is a capacitor, the current_____________ the voltage. A) leads B) lags C) is in phase with D) exponentially is redundant to 8. The term “slip” is used to indicate: A) the amount of horsepower lost due to the motor resistance B) the...

Words: 489 - Pages: 2

Free Essay

Introduction to Power Sytems

... Without it, life can get somewhat cumbersome. 4/4/2007 3 Generation Transmission and Distribution Power travels from the power plant to your house through an amazing system called the power distribution grid. 4/4/2007 4 Generation The Power Plant Electrical power starts at the power plant. In almost all cases, the power plant consists of a spinning electrical generator. Mechanical Force: a water wheel in a hydropower a large diesel engine a gas turbine a steam turbine by burning coal, oil or natural gas or nuclear No matter what it is that spins the generator, commercial electrical generators of any size generate what is called 3-phase AC power. To understand 3-phase AC power, it is helpful to understand single-phase power first. 4/4/2007 5 The Power Plant: Alternating Current 4/4/2007 Single-phase power is what you have in your house 230-volt AC service. The rate of oscillation for the sine wave is 50 cycles per second. The alternative to AC is DC, or direct current. Batteries produce DC: A steady stream of electrons flows in one direction only, from the negative to the positive terminal of the battery. AC has...

Words: 1089 - Pages: 5

Premium Essay

Kinh Tế

...Distribution System Modeling and Analysis The ELECTRIC POWER ENGINEERING Series The ELECTRIC POWER ENGINEERINGSeries series editor Leo Grigsy series editor Leo Grigsby Published Titles Electromechanical Systems, Electric Machines, and Applied Mechatronics Sergey E. Lyshevski Electrical Energy Systems Mohamed E. El-Hawary Electric Drives Ion Boldea and Syed Nasar Distribution System Modeling and Analysis William H. Kersting Linear Synchronous Motors: Transportation and Automation Systems Jacek Gieras and Jerry Piech Forthcoming Titles Induction Machine Handbook Ion Boldea and Syed Nasar Power System Operations in a Restructured Business Environment Fred I. Denny and David E. Dismukes Power Quality C. Sankaran Distribution System Modeling and Analysis William H. Kersting New Mexico State University Las Cruces, New Mexico CRC Press Boca Raton London New York Washington, D.C. 0812_frame_FM.fm Page iv Tuesday, July 31, 2001 10:49 AM Library of Congress Cataloging-in-Publication Data Kersting, William H. Distribution system modeling and analysis / William H. Kersting p. cm. -- (Electric power engineering series) Includes bibliographical references and index. ISBN 0-8493-0812-7 (alk. paper) 1. Electric power distribution–Mathematical models. I. Title. II. Series. TK3001 .K423 2001 621.31—dc21 2001035681 CIP This book contains information obtained from authentic and highly regarded sources. Reprinted material is...

Words: 88409 - Pages: 354

Premium Essay

Iodine

...Dr. Joanna Pajak Introduction: Objective Determination of the solubility limits in a ternary system of water and two other liquids, one of which is completely miscible and the other is partly miscible with water. According to the phase rule of Gibbs the variance F (number of degrees of freedom) of a system at equilibrium is equal to the number of components c minus the number of phases p plus 2, provided that the equilibrium is influenced only by temperature, pressure, and concentration. A system with three independent components has F=5-P degrees of freedom. An invariant point in a ternary system therefore contains five different phases in equilibrium with each other. An invariant point can for example consist of a vapor phase, a liquid phase, and three solid phases in equilibrium with each other. A ternary system with three phases (solid-liquid-vapor) in equilibrium with each other has two degrees of freedom. If the temperature is fixed, one degree of freedom remains. A phase diagram isotherm showing a ternary system with a vapor phase and a liquid phase requires therefore a line to mark the concentration range in which a solid phase is in equilibrium with the other two phases. A point needed to mark concentrations where two solid phases are in equilibrium with liquid and vapor. Experimental: Chemical used Distilled Water Ethyl acetate Ethanol Glass ware used Pipette Beaker Burette Elementary flasks Procedure: Part I o We prepare seven mixtures of water and...

Words: 562 - Pages: 3

Premium Essay

Transmission & Distribution

...subsystem We distinguish between these various portions of the power system by voltage levels as follows: • Generation: 1kV-30 kV • EHV Transmission: 500kV-765kV • HV Transmission: 230kV-345kV • Sub transmission system: 69kV-169kV • Distribution system: 120V-35kV The distribution system may also be divided into three distinct subsystems. • Distribution substation • Primary distribution system • Secondary distribution system Distribution substations The distribution substation receives power from one or more transmission or sub transmission lines at the corresponding transmission or sub transmission voltage level and provides that power to one or more distribution feeders that originate in the substation and comprise the primary network. Most feeders emanate radially from the substation to supply the load. There are five main functions of the distribution substation: 1. Voltage transformation: One or more transformers will always be located within the substation to step down the voltage to the primary distribution voltage level. These transformers will always be three-phase banks, or they will be three single-phase banks connected in a three-phase configuration. 2. Switching and protection: Different kinds of switchgear will be located at the substation, including the following: a. Switches: devices that can carry and interrupt normal load current and thus disconnect portions of the network. b. Circuit breakers: devices...

Words: 1406 - Pages: 6

Free Essay

Maintenance Concept

...equipped with state-of-the-art electronic control, all composite blades, and individual line-replaceable blades. Compatible with most Allison and Rolls Royce engine installations. NP2000 Maintenance Concept The NP2000 propeller system maintenance concept is based on phase inspections according to the number of flight hours. The interval of these inspections is 500, 1,000, 1,500 flight hours. Because of planning purposes, these phase inspections contain periodic maintenance tasks, which would be otherwise performed according to calendar time. Exceptions are inspections such as Pre-flight inspection, Post-flight, conditional, and turn around inspections that are performed at the (O) level. NP2000 Main Features Main features are introduced below: * Compatible with Allison and Rolls Royce engine installations. * Electronic control. * Individual line replaceable blades. * Reduced maintenance costs. * Fewer mechanical parts. * Higher reliability. * Reduced noise. * Lower vibration. * Reduced feather drag. * Tighter speed governing. NP2000 Basic Data * Diameter 13 ft 5 in * 5100 SHP rating, 5610 SHP growth * 1106 RPM Maintenance Levels A traditional three-level maintenance concept, consisting of Organizational level (O), Intermediate level (I) and Depot level (D) maintenance was adopted for the NP2000. Organizational Level Maintenance The “O” level maintenance is performed by operational units performing the following...

Words: 649 - Pages: 3

Free Essay

Jess Westerley Case Study

...Jess Westerly Case Study Based upon your reading and analysis of the Jess Westerly case, what change strategy would you have used if you were Jess Westerly? For Example, would you have used a top-down rapid strategy, a high-involvement-staged strategy? Why? What would be your implementation plan? For example, what would you do first? How would you time phase it? What are the critical (pivotal) actions that must succeed? Based upon my reading and analysis of the Jess Westerly case study, I would have implemented a high-involvement, phased change strategy. Changing the software-as-a-service (SaaS) sales approach from targeting of small and medium business to large organizations is a strategic change for Kauflauf. In order for changes to be made, it is necessary to implement through phases. Key elements are leadership engagement and compensation design. In order to inform my approach with industry best practices, I interviewed a Saas sales leader. To illustrate and frame my approach, I will use Kurt Lewin’s three-phase model for change. In Phase one, we must unfreeze the system. During the first three months, the CEO of Kauflauf must champion the change to pursue SaaS contracts with large organizations (Sales Class 1-3 firms, $500,000+ annual revenue). Using Jess Westerly’s data affirming the opportunity for 30% growth, the CEO must communicate the organization’s change in client targeting; he must also indicate the implied crisis: only those SaaS firms...

Words: 750 - Pages: 3

Premium Essay

Mistakes Were Made but Not by Me

...When discussing leadership we need to remember that this concept requires two or more people to be involved, a leader and a follower(s). In order for these 2 people to interact there must be communication between the two. The Leadership Expectancy (LMX) theory covers the relational concept between a leader and his followers; it puts an emphasis on the dyadic interactions between the two. There are three phases of the LMX theory. It first starts with the stranger phase. In this initial phase the communications and interactions are just beginning. The two parties only engage in interactions that pertain to the objective. At this point in the relationship the motives of the follower are initiated by self-interest. This is descriptive of what is considered to be the out-group. In phase two, the relationship graduates to the acquaintance phase. In this phase we will see the relationship become more interrelated. There is a sharing of ideas and resources from both the leader and the follower. The motives begin to progress to be focused more on the goals, rather than self interest as it was in the beginning of this dyadic relationship. Here is the tipping point of whether a follower is part of the in or the out-group. In the third and final stage, the relationship has matured to a point where there is trust and respect between the leader and the follower. Due to this respect and trust, the follower will be more inclined to have the best interest of the goal set by the leader and work...

Words: 456 - Pages: 2

Premium Essay

System Development

...The phases of the system development Life Cycle include; * System investigation, this is where professionals gather information on what problems a business may have,   the software and programs that are needed, and what problems that may occur.   * System analysis, this stage defines in detail the problem, cause, and solution the organizations plan to solve with its information systems.   * System design, this phase is where the technical design is developed. This includes hardware, software, database, telecommunications and procedures. This is done in logical and physical design which states what the system will do and how the system will perform.   * Programming is the process of turning the system design into specifics * Testing, this is where the system is tested to see if the codes will produce desired results. This is done throughout the programming stage.   * Implementation is where the system is deployed and the old system is out. This is done in three stages, direct conversion: the old system is turned off and the new is turned on. Pilot conversion: the system is operational in small areas of the business. Phased conversions: where components are introduced until the system is fully functional.   * Operations and maintenance, where the system is debugged of any problems. The people who participate in the development of the information system are Users such as employees who will be using the system. System...

Words: 264 - Pages: 2

Premium Essay

English

...learned about the systems development life cycle (SDLC) and covered decisions and activities during some of the phases. SDLC has five phases; analysis, which is the phase to understand and document the current “as-is” state; requirements, which is a phase to define future “to be” state and end user requirements; design, which build technical blueprints of how the proposed system will work; development, which is the phase to transform the design into an actual system; and implementation, which rolls out and tests the new system. However, we only experienced three of the phases during our class, which are the analysis, requirements, and design phases. First of all, we formed our own groups and created an idea of our own app ideas that we wanted to design. Therefore, my group decided to create a recipe app for different kinds of delicious desserts named Dessert Search. During the phase of analysis, we drew out the “as is” process that users will search for a dessert recipe without our app. The process for users seemed to be more complicated and users needed to go through multiple websites to find the recipes that they desire. We also did SWOT analysis for our app, in which we determined our internal and external weakness and strengths for our app. Next, we drew the “to be” process, specified our target market, and created persona for our app during the requirement phase. The “to be” process showed the way the process would function after users use our app, which was more convenient...

Words: 465 - Pages: 2

Free Essay

Gaussian Beam

...Gaussian Beams Enrique J. Galvez Department of Physics and Astronomy Colgate University Copyright 2009 ii Contents 1 Fundamental Gaussian Beams 1.1 Spherical Wavefront in the Paraxial region 1.2 Formal Solution of the Wave Equation . . 1.2.1 Beam Spot w(z) . . . . . . . . . . 1.2.2 Beam Amplitude . . . . . . . . . . 1.2.3 Wavefront . . . . . . . . . . . . . . 1.2.4 Gouy Phase . . . . . . . . . . . . . 1.3 Focusing a Gaussian Beam . . . . . . . . . 1.4 Problems . . . . . . . . . . . . . . . . . . . 1 1 3 6 8 8 9 10 12 15 15 17 20 21 25 25 26 26 27 29 30 31 31 33 35 35 36 39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 High-Order Gaussian Beams 2.1 High-Order Gaussian Beams in Rectangular Coordinates 2.2 High-Order Gaussian Beams in Cylindrical Coordinates . 2.3 Irradiance and Power . . . . . . . . . . . . . . . . . . . . 2.4 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Wave-front interference 3.1 General Formalism . . . . . . . . . . . . . . . . 3.2 Interference of Zero-order...

Words: 13971 - Pages: 56