Premium Essay

Unit 1 Lab 1 Physical Networking

In:

Submitted By Mashburn15
Words 332
Pages 2
Data on Fixed Line vs. Cellular Debate
There are many benefits to both a fixed line network and a purely cellular network. Depending on what you need your network to do or don’t do it would be very important to explore both options. While cell phones, Ipads and tablets seem to run the world now many businesses and homes need and still use fixed line networks. This essay will highlight the pros and cons of having a purely cellular network vs. having a purely fixed line network.
Although we as a people could not imagine life without our cell phones or laptops, fixed line networks were the standard up until cellular phones were introduced. “Fixed lines are in every home and building today so everyone has the ability to have a telephone and data service. To receive or transmit data over the fixed line a modem is needed on each end of the line. The modem takes the digital information and turns it into tones that have been specifically selected for the transmission over telephone network. The modem at the other end is responsible for turning the tones back into digital data. Data rates were limited until digital subscriber line (DSL) was introduced. DSL used the existing analog phone line so there was no need for new equipment other than modems that convert digital data into high-frequency tones along with a filter at the users end to keep DSL transmission from being heard on the telephone.”
The pros to having a fixed line network is that it is a lot cheaper. Most providers even offer free broadband service when you are paying for other services. You also have a higher download allowance which makes it a lot easier to download large files such as movies and videos. Also allowing you to stream things from the internet and send things to family and friends much faster. Basically having a fixed line allows you to use to full potential of the

Similar Documents

Premium Essay

Nt1210 Introduction to Networking Onsite Course

...Technical Institute NT1210 Introduction to Networking Onsite Course SYLLABUS Credit hours: 4.5 Contact/Instructional hours: 56 (34 Theory Hours, 22 Lab Hours) Prerequisite(s) and/or Corequisite(s): Prerequisites: NT1110 Computer Structure and Logic or equivalent Course Description: This course serves as a foundation for the study of computer networking technologies. Concepts in data communications, such as signaling, coding and decoding, multiplexing, circuit switching and packet switching, OSI and TCP/IP models, LAN/WAN protocols, network devices and their functions, topologies and capabilities are discussed. Industry standards and the development of networking technologies are surveyed in conjunction with a basic awareness of software and hardware components used in typical networking and internetworking environments Introduction to Networking Syllabus Where Does This Course Belong? This course is required for the associate program in Network System Administration and the associate program in Electrical Engineering Technology. The following diagrams demonstrate how this course fits in each program. Associate Program in Network Systems Administration NT2799 NSA Capstone Project NT2580 Introduction to Information Security NT2670 Email and Web Services NT2640 IP Networking PT2520 Database Concepts NT1330 Client-Server Networking II NT1230 Client-Server Networking I NT1430 Linux Networking PT1420 Introduction to Programming NT1110...

Words: 4400 - Pages: 18

Premium Essay

Nt 1210

...Technical Institute NT1210 Introduction to Networking Onsite Course SYLLABUS Credit hours: 4.5 Contact/Instructional hours: 56 (34 Theory Hours, 22 Lab Hours) Prerequisite(s) and/or Corequisite(s): Prerequisites: NT1110 Computer Structure and Logic or equivalent Course Description: This course serves as a foundation for the study of computer networking technologies. Concepts in data communications, such as signaling, coding and decoding, multiplexing, circuit switching and packet switching, OSI and TCP/IP models, LAN/WAN protocols, network devices and their functions, topologies and capabilities are discussed. Industry standards and the development of networking technologies are surveyed in conjunction with a basic awareness of software and hardware components used in typical networking and internetworking environments Introduction to Networking Syllabus Where Does This Course Belong? This course is required for the associate program in Network System Administration and the associate program in Electrical Engineering Technology. The following diagrams demonstrate how this course fits in each program. Associate Program in Network Systems Administration NT2799 NSA Capstone Project NT2580 Introduction to Information Security NT2670 Email and Web Services NT2640 IP Networking PT2520 Database Concepts NT1330 Client-Server Networking II NT1230 Client-Server Networking I NT1430 Linux Networking PT1420 Introduction to Programming NT1110...

Words: 4400 - Pages: 18

Premium Essay

Nt1230 Syllabus

...ITT Technical Institute NT1230 Client-Server Networking I Onsite Course SYLLABUS Credit hours: 4.5 Contact/Instructional hours: 56 (34 Theory Hours, 22 Lab Hours) Prerequisite(s) and/or Corequisite(s): Prerequisite or Corerequisite: NT1210 Introduction to Networking or equivalent Course Description: This course introduces operating principles for the client-server based networking systems. Students will examine processes and procedures involving the installation, configuration, maintanence, troublshooting and routine adminstrative tasks of popular desktop operating system(s) for standalone and network client computers, and related aspects of typical network server functions. Client-Server Networking I Syllabus Where Does This Course Belong? 1st QTR GS1140 NT1110 GS1145 Problem Solving Theory Computer Structure and Logic Strategies for the Technical Professional 2nd QTR NT1210 Introduction to Networking NT1230 Client-Server Networking I MA1210 College Mathematics I 3rd QTR NT1310 NT1330 MA1310 4th QTR PT1420 NT1430 EN1320 5th QTR PT2520 NT2580 EN1420 6th QTR NT2640 NT2670 CO2520 7th QTR NT2799 SP2750 Physical Networking Client-Server Networking II College Mathematics II Introduction to Programming Linux Networking Composition I Database Concepts Introduction to Information Security Composition II IP Networking Email and Web Services Communications Network Systems Administration Capstone Project Group Theory The follow diagram indicates how this course...

Words: 1834 - Pages: 8

Premium Essay

Unit 1 Labs

...ITT TECHNICAL INSTITUTE NT1210 Introduction to Networking Onsite Course GRADED ASSIGNMENTS Graded Assignment Requirements Retain all handouts issued in every unit, as well as any assignment, research, or lab documents you prepare as part of assignments and labs. Some may be used more than once in different units. NOTE: Always check with your instructor for specific due dates of assignments. Graded Assignments Unit 1 Assignment 1: Computer Basics Review Course Objectives and Learning Outcomes Identify the major needs and major stakeholders for computer networks and network applications. Describe how digital devices store data. Describe the differences between input and output devices. Assignment Requirements In the Chapter Review Activities at the end of Chapter 1 in the Odom textbook (answers can be found in the textbook): Respond to the multiple-choice questions. Complete the List the Words inside Acronyms table. Required Resources Odom textbook Computer with word processing software Internet access Printer Submission Requirements: Submit your responses as a typed document using Arial or Times New Roman 12-point font, double-spaced. Label your assignment Unit 1 Assignment 1. Unit 2 Assignment 1: Identifying Network Topologies Course Objectives and Learning Outcomes * Identify the major needs and major stakeholders for computer networks and network applications. * Identify the classifications of networks and how they are...

Words: 16182 - Pages: 65

Premium Essay

Police Abuse Essay

...ITT TECHNICAL INSTITUTE NT1210 Introduction to Networking Onsite Course GRADED ASSIGNMENTS Graded Assignment Requirements Retain all handouts issued in every unit, as well as any assignment, research, or lab documents you prepare as part of assignments and labs. Some may be used more than once in different units. NOTE: Always check with your instructor for specific due dates of assignments. Graded Assignments Unit 1 Assignment 1: Computer Basics Review Course Objectives and Learning Outcomes * Identify the major needs and major stakeholders for computer networks and network applications. * Describe how digital devices store data. * Describe the differences between input and output devices. Assignment Requirements In the Chapter Review Activities at the end of Chapter 1 in the Odom textbook (answers can be found in the textbook): * Respond to the multiple-choice questions. * Complete the List the Words inside Acronyms table. Required Resources * Odom textbook * Computer with word processing software * Internet access * Printer Submission Requirements: Submit your responses as a typed document using Arial or Times New Roman 12-point font, double-spaced. Label your assignment Unit 1 Assignment 1. Unit 2 Assignment 1: Identifying Network Topologies Course Objectives and Learning Outcomes * Identify the major needs and major stakeholders for computer networks and network applications. * Identify the...

Words: 16043 - Pages: 65

Premium Essay

Nt2640

...ITT Technical Institute NT2640 IP Networking Onsite Course SYLLABUS Credit hours: 4.5 Contact/Instructional hours: 56 (34 Theory Hours, 22 Lab Hours) Prerequisite(s) and/or Corequisite(s): Prerequisites: NT1210 Introduction to Networking or equivalent Course Description: This course explores network design and implementation by applying the TCP/IP protocols to provide connectivity and associated services. Planning and deployment of network addressing structures, as well as router and switch configurations, are also examined. IP Networking Syllabus Where Does This Course Belong? This course is required in the associate degree program in Network Systems Administration and associate degree in Mobile Communications Technology. The following diagrams indicate how this course relates to other courses in respective programs: Network Systems Administration NT2799 NSA Capstone Project NT2580 Introduction to Information Security NT2670 Email and Web Services NT2640 IP Networking PT2520 Database Concepts NT1330 Client-Server Networking II NT1230 Client-Server Networking I NT1430 Linux Networking PT1420 Introduction to Programming NT1110 Computer Structure and Logic NT1201 Introduction to Networking NT1310 Physical Networking CO2520 Communications SP2750 Group Theories EN1420 Composition II EN1320 Composition I GS1140 Problem Solving Theory GS1145 Strategies for the Technical Professional MA1210 College Mathematics...

Words: 2573 - Pages: 11

Premium Essay

Introduction to Networking

...ITT TECHNICAL INSTITUTE NT1210 Introduction to Networking Onsite Course GRADED ASSIGNMENTS Graded Assignment Requirements Retain all handouts issued in every unit, as well as any assignment, research, or lab documents you prepare as part of assignments and labs. Some may be used more than once in different units. NOTE: Always check with your instructor for specific due dates of assignments. Graded Assignments Unit 1 Assignment 1: Computer Basics Review Course Objectives and Learning Outcomes * Identify the major needs and major stakeholders for computer networks and network applications. * Describe how digital devices store data. * Describe the differences between input and output devices. Assignment Requirements In the Chapter Review Activities at the end of Chapter 1 in the Odom textbook (answers can be found in the textbook): * Respond to the multiple-choice questions. * Complete the List the Words inside Acronyms table. Required Resources * Odom textbook * Computer with word processing software * Internet access * Printer Submission Requirements: Submit your responses as a typed document using Arial or Times New Roman 12-point font, double-spaced. Label your assignment Unit 1 Assignment 1. Unit 2 Assignment 1: Identifying Network Topologies Course Objectives and Learning Outcomes * Identify the major needs and major stakeholders for computer networks and network applications. * Identify the...

Words: 16043 - Pages: 65

Premium Essay

Test

...Contact/Instructional hours: 60 (30 Theory Hours, 30 Lab Hours) Prerequisite(s) and/or Corequisite(s): Prerequisite: NT2580 Introduction to Information Security or equivalent Course Description: This course examines security implementations for a variety of Windows platforms and applications. Areas of study include analysis of the security architecture of Windows systems. Students will identify and examine security risks and apply tools and methods to address security issues in the Windows environment. Windows Security Syllabus Where Does This Course Belong? This course is required for the Bachelor of Science in Information Systems Security program. This program covers the following core areas:    Foundational Courses Technical Courses BSISS Project The following diagram demonstrates how this course fits in the program:    IS4799 NT2799 IS4670 ISC Capstone Project Capstone ProjectCybercrime Forensics NSA    NT2580 NT2670  Introduction to  Information Security IS4680 IS4560 NT2580 NT2670 Email and Web Services Hacking and Introduction to  Security Auditing for Compliance Countermeasures Information Security Email and Web Services      NT1230 NT1330 Client-Server Client-Server  Networking I Networking II  IS3230 IS3350 NT1230 NT1330  Issues Client-Server Client-Server  SecurityContext in Legal Access Security Networking I Networking II   NT1110  NT1210 Structure and Introduction to  ComputerLogic Networking    IS3120 IS3110 NT1210 Network  Risk...

Words: 2305 - Pages: 10

Premium Essay

Nothing

...ITT Technical Institute NT1310 Physical Networking Student Course Package Bring this document with you each week Students are required to complete each assignment and lab in this course package on time whether or not they are in class. Late penalties will be assessed for any assignments or labs handed in past the due date. The student is responsible for replacement of the package if lost. Table of Contents Syllabus 2 Student Professional Experience 19 Graded Assignments and Exercises 23 Labs 47 Documenting your Student Professional Experience 57 ITT Technical Institute NT1310 Physical Networking Onsite Course SYLLABUS Credit hours: 4.5 Contact/Instructional hours: 56 (34 Theory Hours, 22 Lab Hours) Prerequisite(s) and/or Corequisite(s): Prerequisites: NT1210 Introduction to Networking or equivalent Course Description: This course examines industry standards and practices involving the physical components of networking technologies (such as wiring standards and practices, various media and interconnection components), networking devices and their specifications and functions. Students will practice designing physical network solutions based on appropriate capacity planning and implementing various installation, testing and troubleshooting techniques for a computer network. Where Does This Course Belong? | | | NT2799 | | | | | | | | NSA Capstone | | | | | | | Project | | | | | NT2580...

Words: 10839 - Pages: 44

Free Essay

Nt 1210

...will help you succeed and accomplish your goals Please attend every class for success in your field! Grading Policy: * Please read the last page of your syllabus which will be covered in week one. * Missing labs will be made up at 80% after the first week, 70% the after the second week and 0% the third week. * Quizzes will not be made up. * Students can potentially be dropped by the Dean of Academic Affairs after missing 4 or 5 cumulative classes. * Students who miss three consecutive class will be dropped by the Dean of Academic Affairs * Assignments and Labs will be counted at 0% after three weeks. Course Objectives Covered by This Unit * CO1 Identify the major needs and stakeholders for computer networks and network applications * CO2 Identify the classifications of networks and how they are applied to various types of enterprises * CO3 Compare and contrast the OSI and TCP/IP models and their applications to actual networks * CO4 Explain the functionality and use of typical network protocols * CO5 Analyze network components and their primary functions in a typical data network from both logical and physical perspectives * CO6 Differentiate among major types of LAN and WAN technologies and specifications and determine how each is used in a data network * CO7 Explain basic security requirements for networks * CO9 Use network tools to monitor protocols...

Words: 799 - Pages: 4

Premium Essay

Sss Bn Nwteotk

...UNIT DESCRIPTION Bachelor of Networking (BNet) Bachelor of Engineering Technology (Telecommunications) BEng(Tel) BN106-Networking Fundamentals Trimester 1, 2016 1. ENTRY REQUIREMENTS AND SUBJECT WEIGHTING Prerequisites: N/A Co-requisites: BN103 Platform Technologies Credit Points: 15 credit points Level: Year 1, Core Workload: Timetabled hours/week: 4 (Lecture = 2 hours, Tute/Lab = 2 hours) Personal study hours/week: 5 2. STAFF Moderator: Unit Coordinator: Lecturer (Melb): Lecturer (Syd): 3. BRIEF DESCRIPTION This is a second trimester core unit out of a total of 24 units in the Bachelor of Networking (BNet) and Bachelor of Engineering Technology (Telecommunications) BEngTech(Tel). This unit addresses the BNet and BEngTech(Tel) course learning outcomes and complements other courses in a related field by developing students’ knowledge and skills in networks. For further course information refer to: http://www.mit.edu.au/courses/bachelor-networking and http://www.mit.edu.au/courses/bachelor-engineering-technology-telecommunications Computer Networks are built with a combination of computer hardware and computer software. Networks can be categorized in different ways such as according to the geographic area (LAN, WAN, MAN etc) or based on topology or on the types of protocols they support. This unit covers design, networking equipments, protocols and technologies essential to build computer networks. You will also learn principles, benefits...

Words: 2135 - Pages: 9

Premium Essay

English 310

...Business and Public Administration CIS375-01: Data Communications Spring 2015 Section 01: Monday/Wednesday, 1:00-2:15 PM; Classroom: SAC-2103 Instructor Name: Christian Ogwo Office: SAC 2103 Phone: 213-446-8172     Email: cogwo@csudh.edu     Website: Office Hours Mon. 2:15 – 3:15 p.m., Wed. 6:00 – 7:00 p.m. Course Description and Prerequisites Course Description: History and trends of hardware/software for telecommunications; asynchronous and synchronous protocols; codes; case studies of current commercial applications; distributed processing; carriers, services and regulatory agencies; standards; error management; reliability; design and tuning of networks; security. Prerequisites: CIS 370 Textbooks and Other Materials Required: Business Data Communications and Networking, Eleventh Edition, by J. FitzGerald and A. Dennis (ISBN: 978-1118-086834) Recommended: Network Fundamentals, CCNA Exploration Companion Guide, 1st edition, by Mark Dye, Rick McDonald, Antoon Rufi, Publisher: Cisco Press. ISBN-10: 1-58713-208-7; ISBN-13: 978-1-58713-208-7; Published: Oct 29, 2007. Network Fundamentals, CCNA Exploration Labs and Study Guide, 1st edition, by Antoon Rufi, Priscilla Oppenheimer, Belle Woodward, Gerlinde Brady. Publisher: Cisco Press. ISBN-10: 1-58713-203-6; ISBN-13: 978-1-58713-203-2; Published: Jan 18, 2008 Supplemental Materials: CCNA Exploration Course Materials, provided...

Words: 1655 - Pages: 7

Premium Essay

Unit

...ITT TECHNICAL INSTITUTE NT1310 Physical Networking GRADED ASSIGNMENTS ------------------------------------------------- Student Professional Experience Project NSA SPE Project 1 (to be completed by the end of NT1310): Install, Configure, Test, Maintain and/or Document the Worksite Local Area Network and Its Components Purpose The purpose of the Student Professional Experience (SPE) project is to provide you an opportunity for work experience in your field or in a related field to add to your résumé. You may have an opportunity to serve your community or work for a local employer for a project that will take between 20 and 30 hours. Project Logistics Career Services will identify an employer with needs in the following areas: Network related tasks (mostly confined to the LAN and Microsoft Windows Server 2008 environments) Students are expected to practice various skills discussed in all the technical courses in Quarters 1 through 3 of the NSA program at an employer’s site on network related tasks (more confined to the LAN and Microsoft Windows Networking with Server 2008 environments) that would involve installation, configuration, testing, maintenance and documentation of the worksite network and its components, and to properly document the technical information in all involved activities. Such documentation will be used as the source material for Items 2 and 3 defined in the Deliverables section of this document. Possible example projects could...

Words: 6762 - Pages: 28

Free Essay

Case Project

...warehouse. The company already has three buildings, each 1/2 a mile apart, and the warehouse, 2 miles away, will be its fourth building. Currently, the buildings run on separate networks, but the company wants to be able to exchange data among them. For example, the Quality Control Department in Building 1 would like to be able to access servers in the Research Department in Building 2. In addition, the Sales Department in Building 3 wants to conduct video training for its representatives in the field via the Internet.  What kind of transmission media would you recommend for inside each different building and department of the medical instrument company and why?  What type of media would you recommend using to connect the buildings together and why?  Finally, what kind of media should the company use for connecting the corporate WAN to its ISP and ultimately, the Internet? NOTE: The above assignment needs to be turned in as a single Microsoft Word file containing only your answer to the Case Project for Chapter 5. This assignment is turned in using the Assignment Submission for this project found on the Moodle page for this class by the due date listed on the Course Outline. Hands-On Project Assignments for Chapter 5 Create a new Microsoft Word document for your Lab Notebook for Unit 2. Refer to the Requirements for Lab Notebooks in the Supplemental Materials and begin recording your answers for Chapter 5 in this new Lab Notebook document.  Complete Project 5 – 3 under the...

Words: 3057 - Pages: 13

Premium Essay

Network + Chapter 2 Case Project

...Case Project 2-1 Frames are composed of several smaller components or fields. The characteristics of these components depend on the type of network on which the frames run and on the standards that they must follow. In our case all the lab computers run only the TCP/IP protocol on the Ethernet network and all the computers use 3Com NICs. This is actually good information because as we know some manufacturers have several different OUIs (Organizationally Unique Identifier). In this particular case 3Com Corporation uses its own OUI and standards for their NICs. Ethernet frames are different from token ring frames and the two will not interact with each other on a network. Although we can conceivably transmit both token ring and Ethernet frames on a network. Ethernet interfaces cannot interpret token ring frames and vice versa. By changing the frame type (in our case student changed it) which workstation's NIC was using to transmit data from Ethernet to token ring, obviously the connection between these two networking technologies was gone. I would explain the students that this kind of changes in network settings is not recommended and restricted in the lab. I would also impose such restrictions because of safety and security reasons to protect the network settings. It is very important to know what frame type or types each network require. This information is very useful for installing network operating systems, configuring servers and client workstations, installing NICs,...

Words: 762 - Pages: 4