...Supply Chain Management Assignment- 3 Note: a) Copy from internet or any other sources will be dealt severely. However students can take any kind of ideas or information, in that case it is to be acknowledged. Students are expected to do thorough study on the following concepts and write you views as per the given format, in details. Logistics is essential in both manufacturing and service sectors. The service sectors includes government, hospitals, banks retailers etc. logistics basically takes care of time and place utilities. Basically, it helps companies gain competitive advantage. Supply chain management is the process to examine everything from needs identification through the actual use and disposal of purchased materials and services while maximizing the value of ‘Rupees’ spent. SCM is the management of all key business processes across members of supply chain. The primary objective of any supply chain is “CYCLE TIME REDUCTION”. The main objective of this assignment is to provide a platform of understanding the supply chain and the business strategies to interact with various agencies those who are involve in distribution and Supply Chain Management. The topic for the assignment: “Comparative study of Distribution & Supply Chain Management in manufacturing as well as service sectors” Expectations from the students (for evaluation) Your assignments are to be in the following format: 1. Give sufficient information in details about...
Words: 356 - Pages: 2
...Supply Chain Management Assignment ON BULLWHIP EFFECT AND DELAYED DIFFERENTIATION Submitted to Prof Dr. P.R.S.Sarma Submitted by VENKATA RAJA GOPAL RACHERLA Regd. No.: 1226109236 SEC-B MBA (IB) - 2009-11 1 INDEX S No. I 1 2 3 Topic Bullwhip effect Introduction Explanation Causes of Bullwhip Effect Possible Remedies The Bullwhip effect in the electricity sector Conclusion Postponement or Delayed Differentiation Page no. 3 4 4 5 4 5 6 7 6 II 1 10 11 12 Introduction 2 Forecasting uncertainty 14 3 The long-term potential 16 2 THE BULLWHIP EFFECT 3 1. Introduction The bullwhip effect is the magnification of demand fluctuations, not the magnification of demand. The bullwhip effect is evident in a supply chain when demand increases and decreases. The effect is that these increases and decreases are exaggerated up the supply chain. The essence of the bullwhip effect is that orders to suppliers tend to have larger variance than sales to the buyer. The more chains in the supply chain the more complex this issue becomes. This distortion of demand is amplified the farther demand is passed up the supply chain. Proctor & Gamble coined the term “bullwhip effect” by studying the demand fluctuations for Pampers (disposable diapers). This is a classic example of a product with very little consumer demand fluctuation. P&G observed that distributor orders to the factory varied far more than the preceding retail demand...
Words: 3625 - Pages: 15
...BUS 631 Week 5 Assignment Risk Management and the Supply Chain To Buy this Class Copy & paste below link in your Brower http://www.homeworkregency.com/downloads/bus-631-week-5-assignment-risk-management-supply-chain/ Or Visit Our Website Visit : http://www.homeworkregency.com Email Us : homeworkregency@gmail.com BUS 631 Week 5 Assignment Risk Management and the Supply Chain Risk Management and the Supply Chain. Discuss an example of how an unknown-unknown risk proved damaging to a supply chain. You are free to utilize any example and any organization of your choosing. Explain specifically how each of the following might have mitigated this risk: Invest in redundancy Increase velocity in sensing and responding Create an adaptive supply chain community Present your response in the form of a three to four page, APA-style paper. BUS 631 Week 5 Assignment Risk Management and the Supply Chain To Buy this Class Copy & paste below link in your Brower http://www.homeworkregency.com/downloads/bus-631-week-5-assignment-risk-management-supply-chain/ Or Visit Our Website Visit : http://www.homeworkregency.com Email Us : homeworkregency@gmail.com BUS 631 Week 5 Assignment Risk Management and the Supply Chain Risk Management and the Supply Chain. Discuss an example of how an unknown-unknown risk proved damaging to a supply chain. You are free to utilize any example and any organization of your choosing. Explain specifically how each of the following might have...
Words: 3426 - Pages: 14
...BUS 631 Week 5 Assignment Risk Management and the Supply Chain To Buy this Class Copy & paste below link in your Brower http://www.homeworkregency.com/downloads/bus-631-week-5-assignment-risk-management-supply-chain/ Or Visit Our Website Visit : http://www.homeworkregency.com Email Us : homeworkregency@gmail.com BUS 631 Week 5 Assignment Risk Management and the Supply Chain Risk Management and the Supply Chain. Discuss an example of how an unknown-unknown risk proved damaging to a supply chain. You are free to utilize any example and any organization of your choosing. Explain specifically how each of the following might have mitigated this risk: Invest in redundancy Increase velocity in sensing and responding Create an adaptive supply chain community Present your response in the form of a three to four page, APA-style paper. BUS 631 Week 5 Assignment Risk Management and the Supply Chain To Buy this Class Copy & paste below link in your Brower http://www.homeworkregency.com/downloads/bus-631-week-5-assignment-risk-management-supply-chain/ Or Visit Our Website Visit : http://www.homeworkregency.com Email Us : homeworkregency@gmail.com BUS 631 Week 5 Assignment Risk Management and the Supply Chain Risk Management and the Supply Chain. Discuss an example of how an unknown-unknown risk proved damaging to a supply chain. You are free to utilize any example and any organization of your choosing. Explain specifically how each of the following might have...
Words: 2604 - Pages: 11
...Assignment Brief BTEC Level 7 Diploma in Strategic Management and Leadership (501/1000/7) Learner Name: | Learner Registration Number: | Unit Number: Unit 14 - Strategic Supply ChainManagement and Logistics | Unit Number/Code: D/602/2357 | Credit Value: 15 credits | Guided Learning Hours: 45 | Assessor/Tutor(s) | Internal Verifier(s) | Assignment QA Approval Date: | Date Issued to Learner: | Final Submission Date: | Formative assessment (progress checks) hand in dates. (1)………………………… (2)……………………………… | | Unit AimThis unit provides the learner with the understanding and skills to plan strategies to improve an organisation’s supply chain.Unit introductionThis unit focuses on how the concept of supply chain management and logistics is based on the idea that every product that reaches an end user represents the combined effort of multiple organisations which make up the supply chain and that until recently, most organisations paid attention to only what was happening within their own business. Few organisations understood, much less managed, the entire chain of activities that ultimately delivered products to the final customer. This resulted in ineffective supply chains.In this unit, learners will develop the knowledge that, today, many organisations realise that effective management of supply chain activities can lead to increased customer value and achieve sustainable competitive...
Words: 2050 - Pages: 9
...Student Assignment Covering Form |Course/Unit Information | |Course |Pearson (Edexcel) BTEC Level 7 – Diploma / Extended Diploma in Strategic Management & | | |Leadership | |Unit No. |Unit 14 | |Unit Name |Strategic Supply Chain Management and Logistics | |Unit code |D/602/2357 | |Batch |I 1501 – SSCML - Sredharran | |Instructor Information | |Name |Sredharran Sampath | |Phone |0529059903 | |Skype | ...
Words: 1781 - Pages: 8
...ethically aware * Goal Three: Have developed leadership and management capability * Goal Four: Have developed and applied knowledge of international business and management theory * Goal Five: Have developed a range of research skills and project capabilities * Goal Six: (Specialist programmes only) Have developed specialist knowledge about the theory and practice of your programme of study All of the learning that takes place within modules is designed to enable you to achieve the above goals and your assessment tasks are mapped directly to these goals as outlined in each assessment brief. OUTLINE STUDY PLAN 2012/2013 | | Global Supply Chain Management MO0255 | S01 | Week | Lectures | Lecture Topic | Seminar | Recommended Reading | Directed study | 1 | Lecture 1 | Module Introduction | Making the groups of 4-5 studentsCase Study ReviewIntroduction to operation management (Operation Objectives in the Penang Mutiara Hotel) | Slack, N. (2010), sixth Edition, Chapter 2 | -Reading the TLP carefully-Reading stipulated chapters 1, 2 and 3 of the Slack, N. (2010). | | Lecture 2 | Introduction to Global Supply chain and management | | Slack, N. (2010), sixth Edition, Chapter 13 | -Evaluate the supply chain performance in “Siemens”-Evaluate the global sourcing policy within “Levi Strauss” | 2 | Lecture 1 | SC Performance measurement | Case Study ReviewGlobal Supply Chain managementSupplying Fast Fashion (C13, Slack) | Slack, N. (2010)...
Words: 3348 - Pages: 14
...IEM 5763 Supply Chain Strategy Course Syllabus – Spring 2016 |Instructor |Teaching Assistant | |Dr. Tieming Liu |Mr. Hrishikesh Kardile | |Office: 318C EN |Office: 308 EN | |Phone: 744-6055 |Phone: 835-7428 | |E-mail: tieming.liu@okstate.edu |E-mail: hrishikesh.kardile@okstate.edu | |Office Hours: Thursday 2:00-3:00 PM. |Office Hours: M/W 9:30 – 10:30 AM | Objectives and Outcomes: To develop modeling skills and to provide new concepts and problem-solving tools, applicable to the design and planning of supply chains. Upon completion of the class, students will understand how to design and implement supply chain strategies in multi-national supply chains that work under dynamic market conditions including: • Strategic issues in supply chain management • Supply chain designs based on products and markets • How to measure supply chain performance • Where...
Words: 1295 - Pages: 6
...Diploma in Supply Chain Management and Logistics. | Awarding Body | The Association of Business Practitioners | Batch | SCML - 1402 | Instructor Information | Name | GV Rao | Phone | | Skype | | Email | gaddevrao@yahoo.com | Assignment Information | Full/ Part Assignment | Part – Task 1 | Date Assignment Issued | 23/03/2014 | Date Assignment Due | | Student Information (To be filled by the student prior submitting the assignment) | Name | | Email | | Date of Submission | | Student Assignment covering form is an integral part of the assignment document and should be submitted along with all submissions. Student Declaration I, _________________ (Name) hereby confirm that this assignment is my own work and not copied or plagiarized. It has not previously been submitted as part of any assessment for this qualification. All the sources, from which information has been obtained for this assignment, have been referenced as per Harvard Referencing format. I further confirm that I have read and understood the Westford School of Management rules and regulations about plagiarism and copying and agree to be bound by them. Students Signature : _____________________ (signed) Student Name : Date : Learning Outcomes and Assessment Feedback Name of the Assessor | | | | | Learning Outcomes | Assessment Criteria (AC) | Assessor Feedback | LO 1 | | | Understand the importance of supply chain management and logistics...
Words: 986 - Pages: 4
...BTEC Level 7 Extended Diploma in Strategic Management and Leadership Unit 14 : Strategic Supply Chain Management and Logistics Unit Code : D/602/2357 Assignment No : 1 Assignment Title : Strategic Supply Chain Management and Logistics in an organization of your choice Date Set : 18/06/2014 Due Date : 22/08/2014 Learning Outcome Covered: 1. Understand the relationship between supply chain management (SCM) and organizational business objectives 2. Be able to use information technology to optimize supplier relationships in an organization 3. Understand the role of information technology in supply chain Management 4. Understand the role of logistics and procurement in supply chain Management 5. Be able to plan a strategy to improve an organization’s supply chain Grading Opportunities Available: Outcomes/Grade Descriptors | P 1.1 | P 1.2 | P 1.3 | P 2.1 | P 2.2 | P 2.3 | P 3.1 | | | | | | | | | Outcomes/Grade Descriptors | P 3.2 | P 3.3 | P 4.1 | P 4.2 | P 4.3 | P 5.1 | P 5.2 | | | | | | | | | Outcomes/Grade Descriptors | P 5.3 | | | COMMENTS: P (PASS) – Learner should able to demonstrate the ability to explain each outcome as per to the Assessment information page of this assignment. Assessor: Afzal Sayed Munna Signature: Date: IV COMMENTS: IV: Signature Date: Case Study General Motors, the world’s largest vehicle manufacturer, drives its business results by rolling out innovative vehicles...
Words: 1168 - Pages: 5
...Extended Diploma in Strategic Management and Leadership Unit Title: STRATEGIC SUPPLY CHAIN MANAGEMENT AND LOGISTICS | | Unit aim This unit provides the learner with the understanding and skills to plan strategies to improve an organisation’s supply chain Unit introduction This unit focuses on how the concept of supply chain management and logistics is based on the idea that every product that reaches an end user represents the combined effort of multiple organisations which make up the supply chain and that until recently, most organisations paid attention to only what was happening within their own business. Few organisations understood, much less managed, the entire chain of activities that ultimately delivered products to the final customer. This resulted in ineffective supply chains. In this unit, learners will develop the knowledge that, today, many organisations realise that effective management of supply chain activities can lead to increased customer value and achieve sustainable competitive advantage. Supply chain activities cover everything from product development, sourcing, production and logistics, to the information systems needed to coordinate these activities. Learners will discover that the organisations that make up the supply chain are ‘linked’ through physical and information flows. Physical flows involve the transformation, movement and storage of goods and materials and are the most visible piece of the supply chain. Of equal importance are...
Words: 1798 - Pages: 8
...Course Outline School of Business Program: International Business Management Option: Start Date: January 6, 2016 Total Hours: Hours/Week: 30 Total Weeks: Lecture: 3 TDMT 4322 Global Supply Chain Management End Date: 10 1 Lab: Prerequisites: TDMT 3301 Logistics1 2 March 4, 2016 Term/Level: Shop: 4A Course Credits: Seminar: 2 Other: Prerequisite for: TDMT4411 Industry Projects Course Description This course develops an understanding of relationship management within the global supply chain sectors. Topics are delivered based on international influences, value creation, aligning incentives, creating partnerships, sharing resources and finding mutual benefits within the supply chain. An emphasis will be based on building flexible and strategic partnerships and managing changes and shifts in strategies. These methods are aimed at driving supply chain profitability and competitive advantage. Students will do team based case studies relating to Supply Chain Management and 1 term team project and presentation. Evaluation Assignments Term Team Project Participation & Professionalism Mid Term Exam Final Exam TOTAL 20 15 10 25 30 100 % % % % % % Comments: A student must achieve 50% combined grade on the exam scores before the marks for the assignments will be incorporated into the calculation of the overall grade. Course Learning Outcomes/Competencies At the end of this course...
Words: 844 - Pages: 4
...ISCOM 374 Entire Course For more course tutorials visit www.tutorialrank.com ISCOM 374 Week 1 DQs ISCOM 374 Week 1 Individual Assignment Logistics and Supply Chain Article Analysis ISCOM 374 Week 2 Learning Team Assignment Strategic Logistics Report ISCOM 374 Week 2 DQs ISCOM 374 Week 3 Individual Assignment Product versus Service Supply Chain Comparison Paper ISCOM 374 Week 3 Learning Team Assignment Forecasting and Inventory Analysis Paper ISCOM 374 Week 3 DQs ISCOM 374 Week 4 Materials Handling Packaging Field Research Report ISCOM 374 Week 4 Logistics Press Release ISCOM 374 Week 4 DQs ISCOM 374 Week 5 Learning Team Assignment Global Considerations Report ---------------------------------------------------------------- ISCOM 374 Final Exam Test- Use As Study Material For more course tutorials visit www.tutorialrank.com ISCOM 374 Final Exam / Test- Use As Study Material ---------------------------------------------------------------- ISCOM 374 Week 1 DQs For more course tutorials visit www.tutorialrank.com ISCOM 374 Week 1 DQs DQ 1 Pick one article from the course Electronic Reserve Readings (ERR) available in the Course Materials for Week 1. Summarize the main points of either the entire article if it is short or one section of a longer article. Provide your classmates with a concrete discussion of why what you learned is important relative to this week’s learning objectives. Did you learn anything that you could apply some...
Words: 881 - Pages: 4
...Unit Outline* | TRLO8506| Supply Chain Management| | | D4B-OFFShanghai| | Dr Min Qiu| Business School www.business.uwa.edu.au * This Unit Outline should be read in conjunction with the Business School Unit Outline Supplement available on the Current Students web site http://www.business.uwa.edu.au/students TRLO8506/Shanghai/MQ/15.04.11. | | All material reproduced herein has been copied in accordance with and pursuant to a statutory licence administered by Copyright Agency Limited (CAL), granted to the University of Western Australia pursuant to Part VB of the Copyright Act 1968 (Cth).Copying of this material by students, except for fair dealing purposes under the Copyright Act, is prohibited. For the purposes of this fair dealing exception, students should be aware that the rule allowing copying, for fair dealing purposes, of 10% of the work, or one chapter/article, applies to the original work from which the excerpt in this course material was taken, and not to the course material itself.| © The University of Western Australia 2011| UNIT DESCRIPTION Introduction Welcome to the study of supply chain management. The unit and the instructional material have been developed to cover a wide range of issues in supply chain management, which lays a foundation to study specific topics or techniques of logistics and supply chain in depth. The objective of the unit is to enable students to achieve an understanding of the terms, concepts,...
Words: 2170 - Pages: 9
...DOM05 Supply Chain Management Assignment – I Assignment Code: 2014DOM05B1 Last Date of Submission: 15th November 2014 Maximum Marks: 100 Section-A Each question carries 25 Marks. Q1. Discuss in detail few methods of Cost Control in Supply Chain Management. Q2. Discuss in detail few challenges faced by Supply Chain Managers today with few examples. Section – B Case Study (50 Marks) ABC Company is electronics, aerospace, electrical machinery, semi-conductors, and computer products Company. Its annual sales are nearly Rs. 1000 crore. It has manufacturing plants in 5 states and 4 foreign countries. It employs 120000 people worldwide. While its operations had expanded, its purchasing, warehousing and shipping functions had lagged behind its other business units in effectiveness. Although a JIT system had been installed, problems with materials remained because no one seemed to be accountable when difficulties arose. For example, a recent order from a supplier arrived late at ABC Company’s Jamshedpur plant. Purchasing blamed the warehouse and shipping. The warehouse blamed production control. Production control blamed warehousing and purchasing. Shipping claimed that the motor carrier lost the order for several days in Patna, thus delaying delivery. Each function pointed an accusing finger at the other functions. Discuss: How the problems faced by ABC Company could be solved by the use of Supply...
Words: 677 - Pages: 3
