...A STUDY ON EMPLOYEE MOTIVATION CHAPTER-1 1.1 INTRODUCTION The project work entitled a STUDY ON EMPLOYEE MOTIVATION with special reference to Hyderabad Industries Ltd; Thrissur is mainly conducted to identify the factors which will motivate the employees and the organizational functions in Hyderabad Industries Ltd, Thrissur. Management’s basic job is the effective utilization of human resources for achievements of organizational objectives. The personnel management is concerned with organizing human resources in such a way to get maximum output to the enterprise and to develop the talent of people at work to the fullest satisfaction. Motivation implies that one person, in organization context a manager, includes another, say an employee, to engage in action by ensuring that a channel to satisfy those needs and aspirations becomes available to the person. In addition to this, the strong needs in a direction that is satisfying to the latent needs in employees and harness them in a manner that would be functional for the organization. Employee motivation is one of the major issues faced by every organization. It is the major task of every manager to motivate his subordinates or to create the ‘will to work’ among the subordinates. It should also be remembered that a worker may be immensely capable of doing some work; nothing can be achieved if he is not willing to work. A manager has to make appropriate use of motivation to enthuse the employees to follow them. Hence this studies...
Words: 11053 - Pages: 45
...THE PROPERTY INSPECTORS 2010 LIMITED PO Box 82400, Highland Park, 2143 email: grant@thepropertyinspectors.co.nz 0800 NSPEXU (677398) mobile: 027 293 9808 Presenting THE PROPERTY INSPECTORS Pre-purchase Property Report 7 Oak Manor Drive Albany Provided for Jay YIN 04/08/2014 Dear Jay YIN, RE: Pre Purchase Inspection: 7 Oak Manor Drive, Albany, Auckland. Thank you for the opportunity to inspect your proposed purchase which was undertaken in fine conditions on 04/08/2014. Please find following my completed report which I encourage you to read in its entirety. The property report is not a guarantee that all defects (and/or future defects) have been identified. The inspection is carried out solely on a visual basis. All efforts have been made to identify possible defects (and/or future defects). The property report is not a guarantee that the house meets all the requirements under the Building Act at the time of construction and/or under the Building Act at the time of inspection. The purpose of the report is to identify areas of interest/concern, NOT to provide independent expert advice on specific elements and NOT to recommend solutions to faults identified. The purpose of the inspection is to provide an impartial, technically knowledgeable and visually thorough account of the properties general state being the next best step toward assisting a purchaser in determining the appropriateness of the purchase to their individual threshold for maintenance and repair. The...
Words: 5973 - Pages: 24
...The construction industry can be divided into four main areas. Building Dealing with the construction, maintenance and adaptation of buildings such As office blocks, industrial buildings, shopping centres, schools, hospitals, Houses etc Civil Engineering Concerning the construction and maintenance of roads, railways, bridges, Airports, docks and sewers Mechanical Engineering Dealing with installation, commissioning and maintenance of lifts, escalators, Heating, ventilation, refrigeration, sprinkler systems and plumbing systems Electrical Engineering Concerned with the installation, commissioning and maintenance of various Electrical and electronic devises There are a variety of specific job functions within the above areas, giving Employment to over one million people, both men and women. Approximately 60% of the work carried out in the industry is new construction And about 40% is maintenance, refurbishment and renovation. Of this 40%, About 37% is housing and the remaining 63% will be other work. The construction industry is a major employer with companies varying in size Between one or two employees up to six hundred plus. There are approximately 75,000 contractors employing two or more people and, although there are a Large number of large companies, about 92% employs fewer than twenty five. Small Companies: 3employ 1 – 7 people Medium Companies: Employ 8 – 599 people Large Companies: Employ 600+ people The Building Team The construction...
Words: 665 - Pages: 3
...Bangladesh Development Research Working Paper Series (BDRWPS) BDRWPS No. 6 (May 2009) An Analysis of SAFTA in the Context of Bangladesh Md. Joynal Abdin The Federation of Bangladesh Chambers of Commerce and Industry (FBCCI) Bangladesh Development Research Center (BDRC) The views and interpretations in this paper are those of the author(s) and do not necessarily represent those of the Bangladesh Development Research Center (BDRC). Copyright © 2009 Bangladesh Development Research Center (BDRC) for the overall Working Paper Series. The copyright of the content of the paper remains with the author(s) and/or the institution(s) submitting the content. Bangladesh Development Research Center (BDRC) 2508 Fowler Street Falls Church, VA 22046-2012, U.S.A. Tel. +1 703 532 4893 E-Mail: contact@bangladeshstudies.org http://www.bangladeshstudies.org Rights and Permissions All rights reserved. Text and graphics may be reproduced in whole or in part and in any form for educational or non-profit purposes, provided that credit is given to the source. Reproductions for commercial purposes are forbidden. The Bangladesh Development Research Center (BDRC) disseminates the findings of work in progress to encourage the exchange of ideas about development issues in Bangladesh. Our main objective is to disseminate findings and ideas quickly, so we compromise to some degree on quality. The papers are signed by the author(s) and should be cited and referred accordingly. The findings...
Words: 10928 - Pages: 44
...GREEN BUILDING GUIDE Design Techniques, Construction Practices & Materials for Affordable Housing RCAC GREEN BUILDING GUIDE Design Techniques, Construction Practices & Materials for Affordable Housing Principal Author Craig Nielson, LEED AP Rural Community Assistance Corporation Co-authors Connie Baker Wolfe Rural Community Assistance Corporation Dave Conine Rural Community Assistance Corporation Contributor Art Seavey Rural Community Assistance Corporation Design Dave Conine Sharon Wills Rural Community Assistance Corporation Managing Editor and Production Sharon Wills RCAC Corporate Office: 3120 Freeboard Drive, Suite 201, West Sacramento, California 95691 916/447-2854 | 916/447-2878 fax | www.rcac.org Published by Rural Community Assistance Corporation (RCAC), a nonprofit organization dedicated to assisting rural communities achieve their goals and visions by providing training, technical assistance and access to resources. RCAC promotes quality, respect, integrity, cooperation and commitment in our work. Copyright © 2009 RCAC. All rights reserved. For reprint permission, please call 916/447-2854. Disclaimer: The material in this document has been reviewed by RCAC and approved for publication. The views expressed by individual authors, however, are their own and do not necessarily reflect those of RCAC. Trade names, products or services do not convey, and should not be interpreted as conveying, RCAC approval, endorsement or recommendation...
Words: 32710 - Pages: 131
...INDIAN SCHOOL OF BUSINESS MANAGEMENT & ADMINISTRATION PROJECT REPORT On A FRAMEWORK OF “SUPPLY CHAIN MANAGEMENT” Submitted for the Partial fulfillment towards the award of the degree in MASTER OF BUSINESS ADMINISTRATION Submitted By Under the Guidance of SHARATH HS Roll Number: Session – 2013-14 PREFACE This report has been written in response to a comprehensive study, conducted on the “SUPPLY CHAIN MANAGEMENT” of “HINDALCO INDUSTRIES LIMITED”. The report mentions and evaluates the various aspects, pertaining to the distribution channel of the company. ACKNOWLEDGEMENT At the onset I must bow down in reverence to the almighty that blessed us with the understanding & prevalence that is needed in this kind of project report. With great pleasure I express my heartiest thanks to Dr. Diwakar Shetty without whose unrelated support and guidance, this project would just not have been possible. I am very thankful for his invaluable guidance, support, and affable & friendly nature. He/She guided me at each and every stage of project. I am equally indebted to my friends who always inspired and motivated me to do something better through...
Words: 10328 - Pages: 42
...waste management techniques practiced at an educational campus in South India. It encompasses the entire spectrum of waste collection, segregation, reuse, recycle, incineration and landfill. An in-depth analysis of this process has been done as it helps to both emulate and improve this complex yet essential practice. The study involves interaction with people directly associated with this process by which a clear understanding of the technical and management aspect of the entire process can be obtained. It has also provided a substantial amount of raw data regarding the amount and types of waste generated, labour, cost and other related aspects. Appropriate suggestions and justifications had been put forth to improve the efficiency of the system. Keywords: Bio-degradable waste, compost, non bio-degradable waste, waste management. 1. Introduction A sample population of 8000 people in a 450-acre college campus had been considered. The college campus is located in a nondescript village in South India. In such a populous community, generation of large amount of wastes is not surprising. Waste generated here varies from paper, plastic, cloth, glass to food, construction, hospital and sanitary products. Their sources include hostels, offices, mess, canteens, kitchen, staff quarters, guest house, and dispensary and construction sites. In such a scenario, the huge quantity...
Words: 2827 - Pages: 12
...management techniques practiced at an educational campus in South India. It encompasses the entire spectrum of waste collection, segregation, reuse, recycle, incineration and landfill. An in-depth analysis of this process has been done as it helps to both emulate and improve this complex yet essential practice. The study involves interaction with people directly associated with this process by which a clear understanding of the technical and management aspect of the entire process can be obtained. It has also provided a substantial amount of raw data regarding the amount and types of waste generated, labour, cost and other related aspects. Appropriate suggestions and justifications had been put forth to improve the efficiency of the system. Keywords - bio-degradable waste, compost, non bio-degradable waste, waste management. 1. INTRODUCTION A sample population of 8000 people in a 450-acre college campus had been considered. The college campus is located in a nondescript village in South India. In such a populous community, generation of large amount of wastes is not surprising. Waste generated here varies from paper, plastic, cloth, glass to food, construction, hospital and sanitary products. Their sources include hostels, offices, mess, canteens, kitchen, staff quarters, guest house, and dispensary and construction sites. In such a scenario, the huge quantity that is generated from all these sources, if not handled properly may pose a...
Words: 2760 - Pages: 12
...Bangladesh garment exports boom despite disasters Published July 09, 2013 AFP * In this photograph taken on June 23, 2010, Bangladeshi women sew clothes in a garment factory in Ashulia. Output from Bangladesh's accident-prone garment sector has increased in June, with demand from foreign retailers still growing despite the country's factory disaster in April. (AFP/File) DHAKA (AFP) – Output from Bangladesh's accident-prone garment sector increased in June, data showed Tuesday, with demand from foreign retailers still growing despite the country's factory disaster in April. At least 1,129 people were killed when the Rana Plaza factory complex collapsed outside the capital Dhaka in April, sparking demonstrations against Western brands and prompting some retailers to threaten to cancel orders. Government data released on Tuesday showed that the country's total exports -- 80 percent of which come from the garment sector -- soared by 16 percent year-on-year in June to $2.7 billion, following an increase of 15 percent in May. "The disasters didn't have much impact. They are scattered incidents," head of the government's Export Promotion Bureau (EPB) Shuvhashish Bose told AFP, referring to the Rana Plaza tragedy and other factory fires that have killed another 130 workers since November. Total exports from Bangladesh, the second-biggest clothing manufacturer in the world after China, grew by 11 percent to a record $27.02 billion in the 2012-13 financial year to June. ...
Words: 18334 - Pages: 74
...and construct a 150-member Army Reserve Center (ARC) in Rockford, Illinois. Primary facilities consist of three buildings: Training Building of approximately 31,239 SF Organizational Maintenance Shop (OMS) of approximately 5,294 SF Unheated Storage (UHS) of approximately 1,520 SF. All buildings are located in Winnebago County, IL. The project also includes privately owned vehicle (POV) and military equipment (MEP) parking. The Training building provides administrative and training space; the OMS is used for vehicle maintenance and training; and the UHS provides bulk storage space for the tenants equipment. All buildings will be permanent construction; the solicitation will allow for a range of possible structural, wall and roof systems. Sitework will include roadways, parking, walks, exterior lighting, fencing, site improvements, grading, landscaping, and extension of...
Words: 3635 - Pages: 15
...Blacksburg. Dr. Turner is primarily employed as a professional freelance writer. His literary credits include two stage plays, two novels, and two nonfiction works, along with an array of publications in academic and educational venues. All terms mentioned in this text that are known to be trademarks or service marks have been appropriately capitalized. Use of a term in this text should not be regarded as affecting the validity of any trademark or service mark. Copyright © 2003 by Penn Foster, Inc. All rights reserved. No part of the material protected by this copyright may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system, without permission in writing from the copyright owner. Requests for permission to make copies of any part of the work should be mailed to Copyright Permissions, Penn Foster, 925 Oak Street, Scranton, Pennsylvania 18515. Printed in the United States of America 07/24/06 • Approaches to organizing and outlining your documents • Researching information for use in reports and proposals • Using visual aids to illustrate your data In addition, this study unit includes an appendix that you should use as a reference while writing any document. It includes information on the correct use of numbers and abbreviations. It also provides a good list of rules and examples for proper capitalization and punctuation. Whenever you’re unsure...
Words: 18730 - Pages: 75
...------------------------------------------------- Reagent index[edit] A[edit] Chemical name | Chemical formula | Common name | Source and description | Acetic acid | CH3COOH + H2O | 5% Solution: White vinegar | Grocery store; "white vinegar"—5% or "cleaning vinegar"—10%Photography supply store; "Indicator Stop Bath"—89% (with Bromocresol Purple dye) or "Glacial Acetic Acid" 99.5–100% | Acetone | CH3COCH3 | Acetone | General; "nail polish remover"Discount store; Onyx, Cutex. Boating supply; "fiberglass cleaner" Hardware store; "Acetone"While composition varies from product to product, paint removers have more acetone per volume than regular nail polish remover, and industrial grade (rather than consumer grade) paint removers used by professionals + sold in bulk will contain more acetone still. Some stores sell pure acetone as well.[2] | Acetylene gas | C2H2 | Ethyne | Hardware store or Welding supply; "acetylene"By reaction of calcium carbide and water. | Acetylsalicylic acid | C9H8O4 | Aspirin | Pharmacy; "Aspirin" | Aluminium | Al | Aluminium | General; "aluminium foil"Fine art store; "metallic pigment"—powdered aluminiumFiberglass supply shop; powdered aluminium as a filler material.Refined from mined aluminum ore, or bauxite.Often coated with wax to reduce flammability. | Aluminium hydroxide | Al(OH)3 | alumina hydrate | General; "antacid tablets"—blended with magnesium hydroxideAntacid Tablets; Alu-cap, Amphojel, Dialume—100%Fine art supply: "thickening agent"...
Words: 6510 - Pages: 27
...Harvard Business School 9-395-016 January 3, 1995 3M: Profile of an Innovating Company As a perennial winner in Fortune magazine’s annual poll of American CEOs to determine “The Ten Most Admired Corporations,” 3M was almost universally recognized as one of the world’s most consistently innovative companies. Indeed, Fortune described it as “a kind of corporate petri dish that fosters a culture of innovation.” In an era when large companies were struggling to reignite employees’ entrepreneurial spark, 3M was the benchmarking standard. Yet, in November 1991, as “Desi” DeSimone assumed the job of CEO in the midst of a worldwide recession, he was more focused on 3M’s uncertain future than on its glorious past. Beyond the stagnating sales and declining margins he knew would be reflected in his first annual report (see Exhibit 1), DeSimone was aware that the company faced some longer term challenges. With a portfolio of over 100 core technologies being leveraged into some 60,000 products which it sold in 200 countries, some observers were beginning to ask whether this $14 billion giant with over 88,000 employees could continue its extraordinary innovation-powered growth and expansion. It was a question that the new CEO knew he would have to confront honestly. A lot more than the continued admiration of his Fortune 500 peers depended on it. The Beginning: Foundations of 3M’s Values In 1902, on the basis of a report that deposits of corundum, an abrasive mineral, had been found...
Words: 9759 - Pages: 40
...List of Illustration CHAPTER 1 Fig 1.1 frank Lloyd wright on the middle , retrieved on 03/08/2013 http://2.bp.blogspot.com/-dUUknQ3NZBM/UaoiDwNBRwI/AAAAAAAAApg/wgAlqLtEj9U/s400/Marvin+Koner+Frank+Lloyd+Wright+1958-1.jpg Fig 1.2 Imperial hotel japan , retrieved on 03/08/2013 http://www.historybyzim.com/wp-content/uploads/2011/07/Imperial-Hotel.png Fig 1.3 waterfall house by Frank , retrieved on 03/08/2013 http://www.wright-house.com/frank-lloyd-wright/fallingwater-pictures/F1SW-fallingwater-in-fall.html Fig 1.4 Island House by Frank , retrieved on 03/08/2013 http://www.privateislandsmag.com/2010/10/frank-lloyd-wrights-island-design-inquire-for-price/ CHAPTER 2 Fig 2.1. Front view of the complex, retrieved on 03/08/2013 http://bunniesgarden.files.wordpress.com/2010/10/img_7655.jpg Fig 2.2. Overall view of the complex, retrieved on 03/08/2013 http://www.darwinmartinhouse.org/ Fig 2.3. Back view of the complex, retrieved on 03/08/2013 http://www.darwinmartinhouse.org/ Fig 2.4. Martin house, dining room, retrieved on 03/08/2013 https://en.wikipedia.org/wiki/File:Darwin_D._Martin_House_Dining_Room.jpg Fig 2.5. Martin house, living room, retrieved on 03/08/2013 https://en.wikipedia.org/wiki/File:Darwin_D._Martin_House_Living_Room_N.jpg Fig 2.6. Martin house, library, retrieved on 06/08/2013 http://buffaloah.com/a/jewett/125/marint/source/25.html Fig 2.7. Martin house, dining room furniture, retrieved on 06/08/2013 http://buffaloah.com/a/jewett/125/12dr/12dr...
Words: 7095 - Pages: 29
...is the 3rd most profuse element in the earth's crust, a total up to 9% of the earth's crust, making it the most plentiful of all metals. The one of the major user of aluminium alloys is in the transportation industry. Car and truck manufacturers use SPD processed aluminium alloys because they are strong, but lightweight. Another important use of aluminium alloys is in the packaging industry. Aluminium foil, drink cans, paint tubes, and containers for home products are all made of aluminium alloys. Other uses of aluminium alloys include window and door frames, screens, roofing, siding, electrical wires and appliances, automobile engines, heating and cooling systems, kitchen utensils, garden furniture, and heavy machinery. Aluminium is also made into a large variety of compounds with many industrial and practical uses. Aluminium ammonium sulphate is used as a mordant, in water purification and sewage treatment systems, in paper production and the tanning of leather, and as a food additive. Accordingly, new Al alloys and production or processing techniques are still developing in many research areas. Therefore, it is a perfect candidate for experimental and numerical studies when ECAP processing is considered. 1.2 Historical prospective Materials have always defined the era of development, the age of human civilization is in, right from the Stone Age on to the Iron Age, further on to information technology. Throughout history, humankind has evolved from crafting natural materials...
Words: 4961 - Pages: 20
