...anticipated objectives have been fulfilled through the “Chemical Handling & Safety” Training Program held from 25.10.2012 to 26.10.2012. Please rate on the scale provided the following statements as they pertain to your employment and your organization. 01. Your knowledge of chemicals and their hazards, (i) Very Good (iv) Poor 02. (ii) Good (v) Very Poor Your interest in using PPE, (i) Very Good (ii) Good (iv) Poor 03. (iii) Average (iii) Average (v) Very Poor Your interest to get a help of superiors when you encounted problems in using chemicals, (i) Very Good (iv) Poor 04. (ii) Good (v) Very Poor Your awareness of how to act in an emergency situation, (i) Very Good (ii) Good (iv) Poor 05. (v) Very Poor (iii) Average Neatness and tidiness of your working environment, (i) Very Good (ii) Good (iv) Poor 06. (iii) Average (iii) Average (v) Very Poor Your understanding on warning symbols, and product warning labels, (i) Very Good (ii) Good (iv) Poor (v) Very Poor iii (iii) Average 07. Your knowledge in methods to follow in storing chemicals, (i) Very Good (iv) Poor 08. (ii) Good (v) Very Poor Your ability to perform your duties efficiently and effectively as planned, (i) Very Good (ii) Good (iv) Poor 09. (v) Very Poor (ii) No Your satisfaction on the methods follow in disposal in chemical waste, (i) Very Good (ii) Good (iv) Poor 11. ...
Words: 504 - Pages: 3
...Curtin University of Technology Department of Civil Engineering Environmental Engineering Management 690 Assignment 2 Management of Health and Safety at Work in the Chemical Industry Prepared for: Professor Geoff Taylor By: Mohammed Alshiha Student ID: 13884145 Date: Jan 1st 2010 1.0 Introduction 1 Declaration (i) I have read and understood Curtin University’s policy on plagiarism and I confirm that the work submitted on the 1st of January by me is my own work, and that the work of any other person contained therein is clearly acknowledged. (ii) The work has been written since the 8th of December 2009. (iii) The references in the work do directly relate to the material appearing immediately before them in the text. (iv) All word-for-word quotes from another author are in quotation marks. Mohammed Alshiha ID#13884145 1.0 Introduction 2 Contents 1.0 Introduction ................................................................................................................................ 3 2.0 Safety Management System ........................................................................................................ 5 3.0 Risk Analysis ................................................................................................................................ 7 3.1 Search for hazards ................................................................................................................... 7 3.1.1 Systematic...
Words: 4460 - Pages: 18
...an accompanying fire), gas leaks, spills, power outages or release of hazardous or infectious material. It is therefore imperative that institutions develop standard safety operating procedures for personnel, and offer continuous training on the proper ways of handling materials in the laboratory. General personal safety includes not eating, drinking, smoking or applying cosmetics or chewing on pens in the laboratory. Food and drink are not stored in refrigerators or anywhere in the laboratory. Laboratory workers should also ensure that proper personal protective equipment (PPE) is worn at all times. PPE include; Laboratory coats which should be worn at all times inside but not outside the laboratory, footwear should be closed shoes to protect the foot from possible punctures from sharp objects or corrosive reagents. Protective eyeglasses should be used to protect from hazardous...
Words: 776 - Pages: 4
...Chemical Inventory Management System David Acker Auburn University Risk management and Safety Abstract Managing chemical inventories at colleges and universities is one of today’s major challenges for higher education. This is especially true for large, diverse, research-oriented institutions like Auburn University. Knowing what chemicals are on site, their hazard potential, who is responsible for them, and where they are located is essential to maintaining a safe campus. Additionally, Federal and State regulations dealing with hazardous waste, chemical security, and emergency preparedness have become more stringent in recent years, requiring greater accountability from colleges and universities. These safety and regulatory compliance imperatives, along with issues of environmental sustainability and cost containment, drive the need for effective chemical inventory management in the university environment. In order to achieve effective chemical inventory management at Auburn University, Risk Management and Safety (RMS) has implemented a Chemical Inventory Management System (CIMS). The technological core of the CIMS is a chemical tracking database that provides realtime, discreet (to the individual container) monitoring of chemical inventories. The database has the capacity to accurately link the chemical container to hazard data, location, user, and acquisition date. Personnel, equipment, and budgetary resources were required to support the implementation phase, and ongoing...
Words: 4990 - Pages: 20
...Introduction Lab safety is the most crucial part when working in a laboratory. Following all the proper precautions and acknowledging the lab protocols will ensure that everyone in the laboratory does not get harmed in any way. The three modules reviewed in this lab included: personal safety protocols, proper hand washing techniques, and proper disposal practices. Reviewing and practicing all three of these modules helped me recall and understand the importance of lab safety. Methods and Materials The first portion of the lab was over proper hand washing techniques. Proper hand washing includes using water, soap, a nailbrush, and paper towels. First you remove all jewelry from your hands and wrist. Next, you turn on the water and then apply soap to your hands. You must rub your hands together and scrub for at least 20 seconds. During this process of scrubbing your hands, you will use the nailbrush to clean under your...
Words: 1253 - Pages: 6
...LRR#1 Bryan Smith Lab Research Report # 1 Strayer University SCI 110.109GA063-1142-001 Introduction to Physical Science Professor Larry Smith January 27, 2014 The world has always been amazed with astronomy which is the study of earth, planets, space, and the universe as a whole. This is one of the oldest practice since the beginning of time. Many civilizations have studied this for years. This was before anyone came up with the idea to build a ship to visit other planets. People have always been amazed by the unknown, and this is why we still have people going to outer space to discover new things. The use of the research for studying outer space is known as Astronomy. According to the web dictionary Astronomy is the scientific study of the matter in outer space, especially the positions, dimensions, distribution, energy, and evolution of celestial bodies and phenomena (http://www.thefreedictionary.com). Early scientist could not just look up in the sky to measure how far away a star actually is and to see what else is up in space. There is other techniques and equipment is needed. Early scientist use a technique called triangulation. This was done by looking at a star and record its location. Then six months later scientist would look at the star again and measure the distance and record any changes (How are astronomers, 2000). The strength of an earthquake by measure the level of shaking on the...
Words: 902 - Pages: 4
... This includes the training of each new employee before it’s even released to the job site. Employee must have a full and satisfactory training session with the Crew Lead. The Crew Lead will therefore explain our new hire of all our safety standards, PPE policy, and customer relation skills. The Crew Lead has to comply with our contract with all deliverables, to include Green Certified specs.The Crew Lead is also to retrain any employees that fail to meet our QC standards. Crew Lead reports to EML LLC’s Supervisor. 3. Pre-requisites EML, LLC Crew Lead will utilize EML, LLC documents to include time sheets, MSDS books, temporary WO and assigned purchase orders and all associated documents for GSA contract # GS-07P-11-JU-D-0024. Crew Lead has been issued out a copy of our contract and shall reference it at all times. 4. Responsibilities The procedure outlined applies to all EML, LLC employees/ custodians. Items needed to be covered on the training sessions are as follow; • Train custodian employee on using the proper process on this S.O.P. Start point: New Hire Training and Existing Employee Re-Training Sessions • Company policy book • Union book • Safety Signs • Eml Contract Safety Signs Train them to post specific signs when they are working. If they will be mopping floors in walkways, break rooms, restrooms or hallways, make sureCrew Lead will they post a 'wet floor' sign...
Words: 1816 - Pages: 8
...Procedures in the Physical Science Erica Taylor Introduction to Physical Science April 25, 2013 Procedures in the Physical Science Science is defined as the systematic knowledge of the physical or material world gained through observation and experimentation (science, n.d.). Science is an ongoing quest for knowledge and understanding of not only the world itself, but the universe as well. In order to accomplish this quest, scientists use many tools to measure and analyze a variety of elements and phenomena in order to have a clear understanding of why things are the way they are. There are times however when direct measurement of something is not an option requiring scientists to find alternate solutions. Astronomy is the scientific study of the universe and what it is comprised of such as stars and planets. A scientist cannot simply use a ruler to measure how far away a star actually is and therefore indirect measurement techniques are needed. One such technique is the parallax method which involves triangulation. By looking at a star and record its location and then looking at it again six months later, astronomers can measure the distance of the angle of viewing. Combining this information with the orbital diameter of Earth to the sun and a little bit of geometry, astronomers can see that the different angles produce different distances (How are astronomers, 2000). Objects in space aren’t the only challenges scientists face when trying to obtain measurement...
Words: 1070 - Pages: 5
...Laboratory biosafety manual Third edition World Health Organization Geneva 2004 WHO Library Cataloguing-in-Publication Data World Health Organization. Laboratory biosafety manual. – 3rd ed. 1.Containment of biohazards - methods 2.Laboratories - standards 3.Laboratory infection - prevention and control 4.Manuals I.Title. ISBN 92 4 154650 6 (LC/NLM classification: QY 25) WHO/CDS/CSR/LYO/2004.11 This publication was supported by Grant/Cooperative Agreement Number U50/CCU012445-08 from the Centers for Disease Control and Prevention (CDC), Atlanta, GA, USA. Its contents are solely the responsibility of the authors and do not necessarily represent the official views of the CDC. © World Health Organization 2004 All rights reserved. Publications of the World Health Organization can be obtained from Marketing and Dissemination, World Health Organization, 20 Avenue Appia, 1211 Geneva 27, Switzerland (tel: +41 22 791 2476; fax: +41 22 791 4857; email: bookorders@who.int). Requests for permission to reproduce or translate WHO publications – whether for sale or for noncommercial distribution – should be addressed to Publications, at the above address (fax: +41 22 791 4806; email: permissions@who.int). The designations employed and the presentation of the material in this publication do not imply the expression of any opinion whatsoever on the part of the World Health Organization concerning the legal status of any country, territory, city or area or of its authorities, or concerning...
Words: 50038 - Pages: 201
...To be able to explain why written emergency plans are drafted It is best to plan for the worst when it comes to an emergency. The HCF leaders duties is to develop a written disaster plan that explains the duties of staff and making this plan available to the staff for crisis preparation. To ensure that the safety and well being of patients are certain during emergencies. The development plan must be assigned to personnel who are familiar with the facility. Depending of the community and location. For example, California prepares for an earthquake, Florida for hurricanes, and Montana for snowstorms. It is also required by the Joint Commission to have the HCF to have a hazard vulnerability analysis under the EC 4.10. (Environmental Control). The Occupational Safety and Health Administration (OSHA) regulations an National Fire Protection Association (NFPA) and standards must also be taken into account as well as the Centers for Disease Control and Prevention (CDC) Strategic Plan for Preparedness and Response to biological and Chemical terrorism. The American Institute of Architects (AIA) has also issued certain guidelines for design and construction of facilities in locations where there is a recognized potential for certain natural disasters. This plans must provide a process to: Initiate a plan HCF role with community-wide emergency response agencies, including who is in charge, Notify external authorities Notifying Identify and assign personnel during emergencies ...
Words: 268 - Pages: 2
...learning environment that is safe and healthy for children. This goal is important because children need a safe and healthy learning environment in order to get the best out of their experience at school. If they do not feel safe, or their families feel as if they are not safe, then they are in a non-suitable environment. A classroom should provide environments as safe as possible to reduce the inevitable situation of accidents Safety To meet my goal I will keep the playground as free from harmful objects and people as possible. I will also make sure that the classroom cleaning chemicals will be put out of children’s reach. I then will post fire drills and tornado drill directions clearly in the classroom and practice them frequently with the children. I will also provide a first aid kit readily available for adults to use and be knowledgeable of proper usage. On a regular basis I will check the toys in the classroom for broken objects and remove anything that poses a threat to the children and keep myself informed of any safety recalls or alerts on any toys or other equipment in the classroom. Healthy My goal is to have a classroom that encourages healthy practices to keep both the children and the teachers safe and free from disease as possible. Healthy children are always the best type of children. When they are healthy they do not miss class, spread it to others, or fail to do their best when they are at school. When they are healthy they learn to...
Words: 540 - Pages: 3
...qwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmrtyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmrtyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmrtyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmrtyuiopasdfghjklzxcvbnmqwer...
Words: 336 - Pages: 2
...Section 1 Biological Safety Chapter 3 Standard Laboratory Practice and Technique STANDARD LABORATORY PRACTICE AND TECHNIQUE Biohazard Warning Signage A sign incorporating the universal biohazard symbol must be posted at the entrance to the laboratory when infectious agents are present. Biosafety Level 1: The sign may include the name of the agent (s) in use, and the name and phone number of the laboratory supervisor or other responsible personnel. Biosafety Level 2: Posted information must include the name of the agent (s), laboratory’s biosafety level, supervisor’s name (or other responsible personnel), telephone number, and required procedures for entering and exiting the laboratory. Biosafety Level 3: Posted information must include the name of the agent (s), laboratory’s biosafety level, supervisor’s name (or other responsible personnel), telephone number(s), and required procedures for entering and exiting the laboratory. Personal Protective Equipment Once a biological hazard has been identified, the supervisor and employee must agree on the appropriate personal protective equipment (PPE) to be worn as the primary barrier of protection. PPE may include, but is not limited to face protection, lab coats and gowns, respirators, and shoe-covers/booties. Supervisory personnel are responsible for the initial demonstration and periodic follow-up of proper use. Appropriate PPE should be donned before handling potentially hazardous biological materials and removed immediately and...
Words: 1352 - Pages: 6
...Cover Memo for Team Member Packet (Template) DATE: TO: Inspectors FROM: (Team leader) SUBJECT: Lab inspection at (name of laboratory) Enclosed please find your packet for the inspection at the above-referenced laboratory on (date). Before the inspection, we’ll have a meeting of the team to go over logistics and answer any questions you may have. (Enter Date, time, and location of pre-inspection meeting) Travel arrangements are as follows: (Enter Travel and hotel arrangement, etc.) The inspection will begin at (Enter Time inspection will begin, etc.) In preparing for the inspection, I recommend that you review sections pertinent to your area(s) in the CAP’s Laboratory Accreditation Manual at www.cap.org; from the home page, select Laboratory Accreditation; select Information for Inspectors; select Laboratory Accreditation Program Manual. Print out the appropriate pages. Before the inspection, please also review: 1. The test list and the performance of the laboratory on proficiency testing. The printout entitled Variant PT Performance by Laboratory lists PT scores of less than 100% for the last two years. I recommend that you focus on these during the inspection to determine if appropriate corrective action has been taken. The laboratory should have copies of PT exception reports completed by the laboratory and approved by the CAP for items with an asterisk. During the inspection, verify that the laboratory is either participating...
Words: 649 - Pages: 3
...Introduction Occupational Safety and Health is a practical field which is concerned with the safety, health and welfare of people in their workplaces. OSH not only protects workers, but also co-workers, workers' family members, employers, customers and anyone who is expected to be affected by the workplace or experience and accident or injury there. One of the most important aspects of OSH is emergency exits and fire protection systems. I have chosen this topic because fires can break out anytime and anywhere. The other OSH areas such as dangers of machinery, noise levels, toxic fumes or hazardous substances are to be found in specific workplaces, not all of them. Since all workplaces may experience fires, it is very important for them to have a reliable fire protection system and an adequate number of fire exits so that all workers may survive in case a fire breaks out. In the USA only, around 6000 workplace fires take place every year and it is estimated that office fires and explosions result in more than 200 deaths and 5000 injuries each year. Statistics in the UAE are not accurate about this matter. However, high safety measures complying with the requirements of OSHA are set for companies and workplaces before they are offered the license to operate. It has been noticed that the tragic history of all fire disasters is related to problems with fire exits and extinguishing systems which make an important part of a whole fore protection system. Of course, workplaces...
Words: 1271 - Pages: 6
