...Assessment 3 Course Name | Managing Network Operating Systems | Credits | 15 | Code | NW701 | Level | 7 | Id | | Name | | Date | | Signature | | Aims: 1. To equip students with the skills necessary to enable them to manage network operating systems. Date | 6/08/2014 | Time | 9:30 | Learning Outcomes | 1, 2,3 | Assessment Weightings: | 100 Marks in total converted to 40% of final grade | Conditions: | In class individual test. Closed book. Practical task in laboratory conditions, and presentation | Time Allowed: | 1 Hours (practical not included) (plus 15-30 minutes practical time for each student) | Learning Outcomes Assessed: Learning outcomes assessed | Questions | Marks | Assessment Weighting % | 2 | Perform and evaluate tasks that will deploy and configure a network operating system | Task1 Task 2Task 3 | 30 2020 | 50% | 4 | Evaluate how a networking operating system uses the OSI model | Task 1 | 30 | 20% | 5 | Compare and contrast two network operating systems | Task 4 | 30 | 30% | Task Number | Marks allocated | Marks obtained | 1 | 30 | | 2 | 20 | | 3 | 20 | | 4 | 30 | | Total Marks | 100 | | Instructions: 1. You should attempt ALL the questions in this test. 2. Check all the tasks in the assessment 3. Task One is an individual project. 4. Task Two ,Three and Four are practical tasks 5. Read instructions carefully. 6. Write your full name and student...
Words: 1296 - Pages: 6
...Introduction to DNS in Windows Server 2003 There are three scenarios in which your network needs DNS. • Firstly, to find Active Directory resources such as Global Catalog Servers and also Domain Controllers that authenticates Logon or Kerberos requests. • Secondly to locate pages on the internet, • Thirdly, mundane task for example, connecting to a printer share. DNS makes it possible for clients to access network resources using alphanumeric names rather than pure IP addresses. Unlike WINS, DNS is hierarchical, with advent of Windows 2000 DNS became dynamic DNS. In practical terms, it means that clients can update their own DNS Server records automatically, thus reducing the administrative load. The killer reason for implementing DNS is that Active Directory relies on DNS for finding Global Catalog, Kerberos and Logon Servers. Before you install DNS on a production network you need to answer a whole series of questions. For example Will your DNS name match our email domain? Who will be in charge of DNS, you or must you rely on a Unix department? One 'Litmus Test' for a difficult topic is the number of specialist terms a component uses. My rule is the more unusual words and acronyms, the more difficult the subject is to master. DNS passes this ' difficulty ' test with flying colours. For instance you need to understand, Namespace, Authoritative, Recursive, and Incremental to name just a few of the DNS keywords. As you learn about DNS Server watch out for...
Words: 336 - Pages: 2
...for forwarding DNS queries for external DNS names to DNS servers outside the network and conditional forwarders can be used to forward queries according to specific domain names. When we designate a DNS server as a forwarder, then that forwarder is responsible for handling external traffic. Which limits DNS server’s exposure to the internet. In less time, a forwarder resolves a large number of external DNS queries using cached data built by it. This decrease the response time of DNS server. Server which doesn’t have forwarder setup. That server can use root hints to resolve queries. Conditional forwarder:- Conditional forwarders are using to forward queries according to domain names by DNS server. A DNS servers can be configure to forward queries to different forwarders according to the specific domain names that are contained in the queries is better than having a DNS server forward all queries it cannot resolve locally to a forwarder. When we configure the DNS server in one internal namespace to forward all queries to the authoritative DNS server in a second internal namespace, Conditional forwarders enable name resolution between the two namespaces without performing recursion on the DNS namespace of internet. This performance enhances name resolution which also avoids DNS servers performing recursion to our internal root for different namespaces within the network. How to configure Forwarder:- There are two ways to configure forwarder in DNS server. 1. A) We can...
Words: 390 - Pages: 2
...DNS Server Role Updated: January 21, 2008 Domain Name System (DNS) is a system for naming computers and network services that is organized into a hierarchy of domains. TCP/IP networks, such as the Internet, use DNS to locate computers and services through user-friendly names. To make using network resources easier, name systems such as DNS provide a way to map the user-friendly name for a computer or service to other information that is associated with that name, such as an IP address. A user-friendly name is easier to learn and remember than the numeric addresses that computers use to communicate over a network. Most people prefer to use a user-friendly name—for example, sales.fabrikam.com—to locate an e-mail server or Web server on a network rather than an IP address, such as 157.60.0.1. When a user enters a user-friendly DNS name in an application, DNS services resolve the name to its numeric address. What does a DNS server do? A DNS server provides name resolution for TCP/IP-based networks. That is, it makes it possible for users of client computers to use names rather than numeric IP addresses to identify remote hosts. A client computer sends the name of a remote host to a DNS server, which responds with the corresponding IP address. The client computer can then send messages directly to the remote host's IP address. If the DNS server does not have an entry in its database for the remote host, it can respond to the client with the address of a DNS server that...
Words: 3463 - Pages: 14
...As far as the issue at hand there might be an issue with some of the hosts not being authorized through DHCP in the active directory. You can do this by going into the device and going to the console tree, click DHCP; on the Action menu, click Manage authorized servers (the Manage Authorized Servers dialog box appears); Click Authorize; when prompted, type the name or IP address of the DHCP server to be authorized, and then click OK. This can be done on the devices that are not receiving the new address and DHCP will automatically configure the rest. In the command line, type in ipconfig / all to allocate if the devices that are not working have any IP address at all and see if DHCP is enabled. This will tell you if the device is using DHCP. Since the DHCP server was changed, a DHCP server can only service requests for a scope that has a network ID that is the same as the network ID of its IP address. You have to make sure that the DHCP server IP address falls in the same network range as the scope it is servicing. For example your IP address range is 192.168.0.200 through 192.168.0.225, a server with an IP address in the 192.168.0.0 network cannot assign addresses from scope 10.0.0.0. Using ipconfig in the command line will tell what IP address is being used. If it is not the same on the devices that are working then that is where the problem is. Also, the computers not working could use a simple re-boot and maybe the addresses will be automatically assigned or going...
Words: 316 - Pages: 2
...System (DNS) is a standard technology for managing the names of Web sites and other Internet domains. DNS technology allows you to type names into your Web browser and your computer to automatically find that address on the Internet. A key element of the DNS is a worldwide collection of DNS server. The structure of the DNS is a hierarchical namespace allowing the uniqueness of a name to be guaranteed in a tree structure, like UNIX file systems. A system of distribution servers enabling namespace to be made available. a client system making it possible to "resolve" domain names, for example interrogate the servers to find out the IP address corresponding to a name. It is necessary because DNS allows all of these numbers and configuration options to be changed and updated as networks get more and more complicated without requiring the user to keep track of everything. A user doesn't have to send email to different people in the same company. They only need to remember the domain name; even as new servers are added and old servers are removed or replaced. There are two types of DNS servers – primary and secondary. A primary master name server reads data for the domain zone from a file located on the web server of the hosting account. This server usually also sends information to the secondary server as well. A secondary DNS server, also called a slave server or simply a slave, receives zone data from the primary server automatically after starting. In Microsoft's DNS manager software...
Words: 373 - Pages: 2
...starting the next task. To command the computer to wait until the program finishes, the start command used with the /wait switch or /w for short is used. For example to install a DNS Server role the command line input would be start /w ocsetup DNS-Server-Core-Role. 2. To remove a Server role the switch /uninstall is used. The switch is typed at the end of a command line input of the start, /w, ocsetup and then name of the role which is to be removed. For an example, if say the Server role of DHCP was needed to be uninstalled the command line input would be start /w ocsetup DHCPServerCore /uninstall. 3. To start and configure the DHCP Server role once it has been installed two commands will be needed. To configure the service the command to input would be sc config dhcpserver start= auto. This command will bring up the ChangeServiceConfig function for the DHCP Server role. To start the DHCP Server role the command line input would be net start dhcpserver. 4. To configure a DNS zone once a DNS Server role has been installed the command line input to use is dnscmd. The dnscmd command is used in conjunction with the / command followed by the DNS configuration that is to be changed. For example if the DNS server cache need to be cleared the command line input would be dnscmd...
Words: 254 - Pages: 2
...*part one talk about DNS servers. What are they what do they do basic configuration and variation of configuration. As the network administrator for Contoso, Ltd to resolve the issue of users on the company network reporting that they can use host names to connect to computers on the local private network, but they cannot use host names to connect to Internet destinations you have a few options. The action that will take the least amount of administrate effort to enable network users can connect to the Internet host names would be to configure NS2 and NS3 to use NS1 as a forwarder. A DNS forwarder is a DNS server that performs DNS queries on behalf of another DNS server (Shinder.T 2005). With this setup one would configure the firewall used by NS1 to allow only one DNS server to communicate with the internet. After you configure NS2 and NS3 to forwarder all queries that cannot be resolved internally will be forwarded to NS1. Because of the large amount of traffic going through NS1 the server will build a large cache of DNS data, overtime this data will allow the DNS server to process request faster(Book). Another option to solve the issue of users on the company network reporting that they can use host names to connect to computers on the local private network, but they cannot use host names to connect to Internet destinations is to configure all DNS servers to send queries outside of a network using their root hints. This is not the most desirable configuration because...
Words: 781 - Pages: 4
...Installing Server Roles with a Batch File 1. What does the /w switch do? Why is it used? “¹/W switch specifies the warning level of the MIDL compiler.” 2. What is the goal of port scanning? ServerManagerCmd.exe command-line tool can be utilized to install or remove Server 2008 Roles and Features. “Type the following, in which name represents the command name of the role, role service, or feature that you want to remove, and then press Enter. The -restart parameter restarts the computer automatically after removal is complete, if a restart of the computer is required. ” ServerManagerCmd.exe -remove name –restart”² 3. What is the command to start the DHCP Server service? “To start the DHCP service, use the command/sbin/service dhcpd start. To stop the DHCP server, use the command /sbin/service dhcpd stop.”³ 4. What command is used to configure a DNS zone? “dnscmd [ServerName] /zoneadd ZoneName ZoneType [/dp FQDN| {/domain|/enterprise|/legacy}] /load”⁴ References 1. /W switch. (n.d.). (Windows). Retrieved March 20, 2014, from http://msdn.microsoft.com/en-us/library/windows/desktop/aa367383(v=vs.85).aspx 2. Dnscmd Syntax. (n.d.). : Domain Name System(DNS). Retrieved March 20, 2014, from http://technet.microsoft.com/en-us/library/cc756116(v=ws.10).aspx#BKMK_22 3. Removing Server Roles and Features. (n.d.). Removing Server Roles and Features. Retrieved March 20, 2014, from http://technet.microsoft.com/en-us/library/cc732257.aspx 4. Start or stop...
Words: 274 - Pages: 2
...support the size, security needs and growth possibilities of an organization. One area that will impact the entire organization for years relates to using/installing Domain Name System (DNS) and Dynamic Host Configuration Protocol (DHCP). DNS and DHCP services can be set up in an office by installing the correct equipment or through the ISP that the organization is using. Knowing what is best for the organization should be based on their current size and equipment needs. A small office with only 2 computers would not require new equipment to be installed. In this size office I would recommend statically assigning the IP addresses to the two computers and using the DNS that is on the ISP network. For an office a little bigger, with 5 computers, I would recommend that they install a router/hub in-one device which can also act as a DHCP server. These all-in-one devices are typically less than $200, will add firewall protection and have ports to connect the computers via an Ethernet connection which will allow better internet access. I would still recommend that this office use the DNS on their ISP’s network. For a larger organization with over 25 computers, I would recommend that they install a Server which will have both DNS & DHCP options. With the size of this organization, having the DNS & DHCP on site will allow for quicker response times when using the internet and the ability to not have to manage which IP addresses are assigned to which...
Words: 275 - Pages: 2
...Student Client-Server Network Instructor Steven Wilhelm Project 2 31014 Charles Hays II I would say that the best lay out for a server system would be to setup the office with one physical server in the office which would act as the main DNS and this server would run on windows 8 server. You may ask why only one server? The simple answer is this I would setup the email server, print server and the office server would all be set as cloud servers this would save us on space as well as allow employees with the right permission to access the servers from any location via hardwired or wireless. How would I set up the group polices? Let’s star with the BC (Bereavement counselors) and the PCC (practitioner clinical counselor manager) I would set them up as local group with permission save to and access the print server and office server this is would allow them to access patient records from the server as well as save then for the doctors and nurses to access later. Also the TC (intake coordinator) and the VC (volunteer counselor) would be set up as a local group with the same access and permission as the BC this is due to the fact that like the BC I believe that due to the fact that thy are only inputting information and updating information, I see no need to allow them to have full access to system this to groups would have NTFS list folder contents permission...
Words: 442 - Pages: 2
...a Virtual Server Image Unit 1. Lab 1.2 Preparing an Application Server Ques. 1 – NT2670Svr03A Ques. 2 – This is the first time the disk has been used. Ques. 3 – Disk moves to online status. Ques. 4 – The disk is unallocated space and has not created a volume type yet. Table 1-2-1 – Disk type (basic or dynamic) – Disk 0 – Basic Disk 1 - Basic Total disk size - Disk 0 – 40GB Disk 1 – 16GB Number and type of partitions – Disk 0 – NTFS Primary Partition Disk 1 – Unallocated Basic Partition Amount of unallocated space – Disk 0 – 40GB Disk 1 – 16GB Ques. 5 – Shrink Volume / Delete Volume Ques. 6 – All available disk space has been allocated to C:, X:,Y: drives Ques. 7 – This allows data to be transferred from disk to disk Ques. 8 – C: drive contains system files and boot files that cannot be moved Table 1-2-2 – Unallocated space left (in Gigabytes) Disk 0 – 0 Disk 1 - 8 * Unallocated space left (in Megabytes) Disk 0 – 0 Disk 1 – 8000 Ques. 9 – All tasks could be completed using the Server Manager Ques. 10 – Active Directory Domain Services - DHCP Server - DNS Server Ques. 11 – Group Policy Management – AD DS Tools – DHCP Server Tools – DNS Server Tools – Net Framework 3.5 Ques. 12 – Active Directory Roles and Services were installed Ques. 13 – It added File Services under the Server Roles Ques...
Words: 314 - Pages: 2
...[pic] Airtel Information Guide [pic] Installation / Fault Date : 12/ 10 / 11 Tale phone : 01204230898 Login ID (Username) : 01206087012_dsl@airtelbroadband.in Password : 7005311323 Oder id : 1191908 Task id : 3544468 Speed in Your Plan : 2 mbps To check Your Connection Speed go to Site http://speed.ncr.airtelbroadband.in First Level Troubleshooting If your Internet not working please restart your computer & off / on the modem and wait 2 min. then start. [pic] [pic] Beetel 220BX / 110BX / Wifi Router (Check your modem LED status) 1. Red LED showing power: - If light not glowing checks your power plug and modem adaptor. 2. Yellow LED-showing Link: - If light is not glowing check the RJ11 cable, Splitter connection and phone line (if line phone dead contact to phone dept.) (SPLITTER CONNECTION) [pic] 3. Green LED showing data transfer: - If this light not blinking please on / off the modem. 4. Last Green LED showing computer to modem connectivity: -If light not display check USB / LAN...
Words: 778 - Pages: 4
...The new web architecture is a complete change from the previous implementation of the site causing an entirely new template and architecture. Previous setup used manual ordering, so they would have to call in or physically come in to order the chips. The new architecture will allow for online ordering that will free up more user time in answering phones taking orders. I am assuming the previous network architecture is up to date and running properly. With this assumption, few technology upgrades will be fully required. Improving the technology infrastructure would require an upgraded internet connection to help offset the new traffic that will be occurring with the web site being hosted locally. A new physical server to become a web server, using one of the current servers and repurposing it to become the...
Words: 2926 - Pages: 12
...There is a limit on the cable length; there is also a limit on the number of nodes that can be connected all at once. Ring This is referred to as a ring network. This is a when computers are connected to each other in a circle shape. The packet is sent around the ring until it gets where it is meant to be. You don’t need the network server to control the connection between the workstations. Each of the computers have got access to all of the same things. If one of the computers go down it will affect the whole network. The network depends on the wire which connects the computers components. Tree This network is referred to as a star bus topology; it is common to networks such as the star and bus topology. The tree topology connects groups of star networks to other star networks so you can extend them. You can expand the network easily. If one of the parts are damaged the others will not be affected. The tree topology depends on the main bus cable to keep the network running but if it breaks the whole network will go down. The more computers added then the more difficult...
Words: 798 - Pages: 4
