Premium Essay

Double Pipe Lab Report

Submitted By
Words 290
Pages 2
This Lab Report discusses double dipping and the bacteria that comes from it. What they are trying to discover is, Does double-dip practice pose and concerns? With a specific question of how many bacteria are transferred from the perpetrator's mouth to dip?
When they tested the results for experiment 1 they found that more bacteria was found after biting the cracker than without a bite in the cracker. Proving that if you do take a bite out of the cracker and double dip, you will transfer more bacteria.
In Experiment 2 they tested the time, pH, and a dipping treatment. When it was tested they always found that the bacterial treatment was always higher than the control and no dipping treatments. There was also no significant differences between the bacteria control group and the no dip solutions. Although the pH made a big difference in the bacterial population of the bite dipped solution. …show more content…
The results showed that the control and no dip treatments have the same or low bacteria populations regardless of recovery time or dip type.
This research is very important because people really do have a fear of germs, and studies have shown that humans transfer the most germs through contact with food. I think that double dipping is bad and can make you feel uncomfortable. And that the research shown in this experiment is eye opening and it shows that double dipping can transfer bacteria. I do think that they could have given an example of the consequences of double dipping, like if one was sick, or possible allergic. But all in all, I liked the read and it was cool to see how it

Similar Documents

Free Essay

Intro Bio

...Lab Manual Introductory Biology (Version 1.4) © 2013 eScience Labs, LLC All rights reserved www.esciencelabs.com • 888.375.5487 2 Table of Contents: Introduc on: Lab 1: Lab 2: Lab 3: Lab 4: The Scien fic Method Wri ng a Lab Report Data Measurement Introduc on to the Microscope Biological Processes: Lab 5: Lab 6: Lab 7: Lab 8: Lab 9: The Chemistry of Life Diffusion Osmosis Respira on Enzymes The Cell: Lab 10: Lab 11: Lab 12: Lab 13: Lab 14: Lab 15: Cell Structure & Func on Mitosis Meiosis DNA & RNA Mendelian Gene cs Popula on Gene cs 3 4 Lab Safety Always follow the instruc ons in your laboratory manual and these general rules: eScience Labs, LLC. designs every kit with safety as our top priority. Nonetheless, these are science kits and contain items which must be handled with care. Safety in the laboratory always comes first! Lab Prepara on • • Please thoroughly read the lab exercise before star ng! If you have any doubt as to what you are supposed to be doing and how to do it safely, please STOP and then: Double-check the manual instruc ons. Check www.esciencelabs.com for updates and ps. Contact us for technical support by phone at 1-888-ESL-Kits (1-888-375-5487) or by email at Help@esciencelabs.com. • Read and understand all labels on chemicals. If you have any ques ons or concerns, refer to the Material Safely Data Sheets (MSDS) available at www.esciencelabs.com. The MSDS lists the dangers, storage requirements, exposure treatment...

Words: 26048 - Pages: 105

Free Essay

Displacement Reactions

...Alyssa, Myrjun, Lindsay, Lara Displacement Reactions Lab Report Purpose: To observe and compare single and double displacement reactions. Hypothesis: If a metal element is mixed with an ionic compound, one metal will displace the other to create a new ionic compound. If 2 ionic compounds are mixed together, then the metals will displace each other, creating 2 new ionic compounds. Materials: Goggles, large well plate, steel wool, scoopula, 4 small beakers, dropper, 4 pieces of magnesium ribbon, 4 pieces of zinc metal, 4 pieces of copper wire, copper (II) sulfate solution, zinc nitrate solution, magnesium nitrate solution, sodium carbonate solution and hydrochloric acid. Procedure: Part A: Single Displacement Reactions 1. Clean 4 pieces of magnesium ribbon, zinc metal and copper wire with steel wool until they are shiny. 2. Half-fill one column (three wells) of the well plate with the copper (II) sulfate solution. 3. Half-fill a second column (three wells) with the zinc nitrate solution. 4. Half-fill a third column (three wells) with the hydrochloric acid. 5. In each column, place 1 piece of each metal in different wells (Magnesium in one well, zinc in another and copper in the last). Use a toothpick to keep the metals submerged in the solution. 6. Observe the different reactions in each well. Record your observations in a table. 7. Save the contents of the wells for Part B. Part B: Double Displacement Reactions 1. Add 3 drops of the sodium...

Words: 1034 - Pages: 5

Free Essay

Random

...monitor the construction process against indicators for the delivery of a Green laboratory. Finally, the staff of the laboratory as well as the Loughborough University shall pay continuous effort to maintain a resource-efficient operation during the lifecycle of the new lab. Design stage The design of the new laboratory shall take significant environmental aspects into account throughout the feasibility report, project definition and drawing development stages. First of all, the Environmental Management System of Loughborough University shall act as the main guideline of the client need. On the other hand, the design work shall satisfy specific sustainability specification such as BREEAM New Construction Technical Manual SD5073-2.0:2011. Goal #1 Water consumption The water strategy is designed to increase efficiency of water use, with consideration to the huge water consumption of the new laboratory. Key objectives: 1. Reduce the consumption of portable water for sanitary use from all sources. 2. Reduce unregulated water consumption by introducing water efficient experiment equipment. 3. Ensure and reduce the impact of water leak on the main water supply, with emphasis to the branch pipe in connection with the experience equipment. Goal #2 Carbon management The carbon management strategy aims to minimise the electricity and gas needs, eventually reduce the total CO2 emissions at the Loughborough University for 43% by 2020 as compared to...

Words: 1601 - Pages: 7

Free Essay

Nutrition Lab #1

...NUTRITION 121 HUMAN NUTRITION LABORATORY BACKGROUND AND METHODS MODULE #1 BODY COMPOSITION Late Labs: 10 point deduction! A report submitted >1 week late, will receive 0 points for the lab!! Written and edited by: Karon Felten and Nutrition 121 TA’s With Special Thanks to: Chris Pritsos Ph.D. Nutrition Department Chairman ABSTRACT: In nutrition, there are many factors that influence an individual’s health and body weight, such as heredity, food selection, eating behaviors, and physical activity. Scale weight is not always a good indicator of body fat, lean mass, body water or overall health (1). This laboratory experience will give students the opportunity to conduct physical assessments by evaluating body weight and body composition. To determine body weight and body composition, techniques such as bioelectrical impedance analysis (BIA), body mass index (BMI), waist circumference, wrist circumference for determining frame size, and a scale will be utilized. Students will also evaluate their own risk for cardiovascular disease and assess cardiovascular health in volunteers by measuring heart rate, filling out a heart disease risk score form, and estimating oxygen consumption and energy expenditure through a technique known as the Queens College Three-Minute Step Test. BACKGROUND: Your body is made up of the six essential nutrients: water, fat, protein, carbohydrates and various vitamins and minerals. Many factors can influence an individual’s...

Words: 4204 - Pages: 17

Premium Essay

Sgsdgv

...Where we stand now: E-cigarettes by Sandee LaMotte, CNN Updated 6:00 PM ET, Mon January 25, 2016 A delegate at the "E-Cigarette Summit" smokes an e-cigar. In the e-liquid nicotine is usually suspended in propylene glycol and glycerine. 7 photos: A delegate at the "E-Cigarette Summit" smokes an e-cigar. In the e-liquid nicotine is usually suspended in propylene glycol and glycerine. Hide Caption 4 of 7 E-pipes work on the same principle. When someone draws on the device it detects the air flow and heats the e-liquid in the cartridge to form a vapor. 7 photos: E-pipes work on the same principle. When someone draws on the device it detects the air flow and heats the e-liquid in the cartridge to form a vapor. Hide Caption 5 of 7 Vaporizers have also been adapted for marijuana. They have been developed for the medical market and contain cannabidiol (CBD), a method of pain-relief for glaucoma and migraines, whilst omitting THC, which causes the "high." 7 photos: Vaporizers have also been adapted for marijuana. They have been developed for the medical market and contain cannabidiol (CBD), a method of pain-relief for glaucoma and migraines, whilst omitting THC, which causes the "high." Hide Caption 6 of 7 Nicotine gum and patches predate ENDS as a way for people to attempt to give up cigarettes. 7 photos: Nicotine gum and patches predate ENDS as a way for people to attempt to give up cigarettes. Hide Caption 7 of 7 "Cigalike" e-cigarettes...

Words: 3528 - Pages: 15

Free Essay

Textile Experience

...PREFACE: To The Evaluators Of My Training Program If we look at our surroundings, all the human beings would be wearing some cloth, most of which is woven. Today the average consumption of textile products per person per year is 6.7 Kg. The world population has crossed the six billion figure, so more than 40 million tons of fabric is utilized by the mankind of world each year. Indeed both consumption per person and population are increasing at a faster pace. Consumption per person is confidently expected to increase after December 2004, as WTO would eliminate the quota costs, import duties and other such tariffs. To be competitive in the textile market, the manufacturers of this industry will have to transfer this benefit of low cost to the customers, which in turn would encourage the customers to buy more. This process would yield economies of scale for the producers and thus the textile companies will achieve enormous growth. Pakistan has competitive edge over many other countries in the textile industry, so it will more focus and capitalize on this concern. This gives a view of future prospects of opportunities in textile and importance of textile products. More specifically the shade, look, handfeel of fabric and durability of shade are the crucial factors of concern for the textile customers (these factors are expected to gain more attention of customers in future). These factors are complied in dyeing processes. Kohinoor Dyeing Mills Ltd. (KDML) is involved in the...

Words: 5262 - Pages: 22

Free Essay

Baking

...HISTORY OF BAKING On today’s market there is a never ending variety of the most delicious sweets and pastries to please both the palate and the eyes. We have become so used to this diverse range of bread, mouth watering pastries and cakes that seldom we ask just how they come into existence. I guess my initial interest in the origin of the baking industry was not aroused by accident; rather I suspect it was kindled by a chain of events occurring earlier in my life... My Grandfather owned a small hotel and bakery in Switzerland and when he retired my father who was an excellent pastry cook continued the business. As a small child I spent many hours watching my dad at work and later followed in his footsteps almost as a matter of course. Then again, I have a suspicion that it may have been “fate-by-design” that made me take up pastry-cooking. The question still remains, was my career pre-determined by the fact that my grandfather had thousands of letterheads printed for his bakery which included his name? The prospect of a hefty quantity discount would no doubt have made perfect sense to my frugal fore bearer; it must have been so much cheaper getting all this printing done in a big way. Grandfather should have realised (and I suspect that he might have) that there was not the slightest chance that any one generation could ever use up this huge mountain of stationery. Granddad’s first name “Fritz” was also my father’s first name and when I was born there was never any question...

Words: 19791 - Pages: 80

Premium Essay

Karan

...CONTENTS 1 2 3 4 5 6 Abbreviations/Definitions Code of Conduct and Ethics for Students Important Academic Rules Scheme of Studies Important Notes Detailed Syllabus 1 2 3 17 19 20 Lingaya’s University, Faridabad ABBREVIATIONS/DEFINITIONS "AC" means, Academic Council of the University. "BOM" means, the Board of Management of the University. "BOS" means, the Board of Studies of the Department. “CAU/AUC-option” CAU/AUC means change from Credit to Audit option / change from Audit to Credit option "Class/Course Committee" means, the Class/Course Committee of a class/course. "Course" means, a specific subject usually identified by its course-number and course-title, with a specified syllabus / course-description, a set of references, taught by some teacher(s) / course- instructor(s) to a specific class (group of students) during a specific academic-semester / semester. “Course Instructor" means, the teacher or the Course Instructor of a Course. "Curriculum" means the set of Course-Structure and Course-Contents. "DAA" means, the Dean of Academic Affairs. “DAAB” means Departmental Academic Appeals Board. “DEC/PEC” means Dissertation Evaluation Committee / Project Evaluation committee. “Department” means a group in the University devoted to a specific discipline also called a School. Department and School are used interchangeably. "DSA" means, Dean Student Affairs. “ESE” means End-Semester Examination “EYE” means End-Year Examination. "Faculty Advisor/Class Counsellor”...

Words: 14653 - Pages: 59

Premium Essay

My Lab 3

...rate tables Resources are the people, equipment, and materials necessary to complete a task. MS Project focuses on two aspects of resources: availability and cost. Availability determines when a specific resource can work on a task and how much work they can do and cost refers to how much money will be required to pay for that resource. MS Project works with two types of resources: work resources and material resources. Work resources are the people and equipment that do the work of the project. These can be a single individual, a group of people who have common skills (such as electrician), or equipment (such as a truck or diagnostic tool). Equipment resources need not be portable; they can be fixed, such as a conference room or lab. Material resources are consumables that you use up during the project, such as cabling or bricks. We will be creating our resources and assigning them to tasks. Please follow all instructions carefully! Adding Resources 1. Log onto Windows. 2. Open your completed file MyLab1b_XXX.mpp (or download the MyLab1b_XXX.mpp file from Doc Sharing.) Check the addendum at the end of this lesson to make sure that your beginning file is correct. If it is not, then correct your file as needed or download the completed MyLab1b_XXX.mpp file from Doc Sharing. 3. Save as MyLab2_XXX.mpp, where XXX are your initials. It is important to note, that when entering resources in MS Project to NEVER add resources to a summary task. ONLY...

Words: 3985 - Pages: 16

Premium Essay

Negative Economic Impact of the Ppaca

...Negative Economic Impact of the Patient Protection and Accountable Care Act The Patient Protection and Affordable Care Act (PPACA) also referred to as ObamaCare, federal healthcare law, Affordable Care Act, or ACA, is a United States federal Statute signed into law on March 23, 2010, by President Barack Obama. In combination with the Healthcare and Education Reconciliation Act, it represents the most significant regulatory overhaul of the U.S. healthcare system since the passage of Medicare and Medicaid in 1965 (Patient Protection and Affordable Care Act). The PPACA is intended to increase the number of health insured Americans and reduce the overall costs of healthcare. The PPACA will revamp the current health insurance system by extending health insurance coverage to nearly 32 million currently uninsured Americans; 18 million through Medicaid expansion to individuals with incomes under the 133 percent federal poverty line (FPL), and 18 million through government exchange subsidies to individuals with incomes up to 400 percent of the FPL. Citizens and legal residents in families with income between 100 and 400 percent of poverty who purchase coverage through a health insurance exchange are eligible for a tax credit to reduce the cost of coverage. To subsidize the additional 32 million individuals covered, the new law introduces 18 new taxes and penalties on individuals, employers, and businesses (Campbell). Though the PPACAs intent is to lower healthcare costs, it will...

Words: 3283 - Pages: 14

Free Essay

Kabra

...A SUMMER TRAINING REPORT ON “METHOD STUDY & MATERIAL MOVEMENT” AND COMPANY OVERVIEW AT "KABRA EXTRUSION TECHNIK SUBMITTED IN PARTIAL FULLFILLMENT OF THE REQUIREMENT OF MBA PROGRAMME SUBMITTED BY: UNDER THE GUIDANCE OF: PATEL HIREN B. INTERNAL GUIDE AT GRIMS PROF. ANITHA THOMAS EXTERNAL GUIDE AT COMPANY Mr. S.L.GANDHI (P&A MANAGER KABRA EXTRUSION TECHNIK) POST – GRADUATE CENTRE GIDC RAJJU SHROFF ROFEL INSTITUTE OF MANAGEMENT STUDIES, VAPI AFFILIATED TO VEER NARMAD SOUTH GUJARAT UNIVERSITY, SURAT CERTIFICATE- This is to certify that Mr. Patel Hiren B. has satisfactorily completed the project work at Kabra Extrusion Technik Ltd, under the guidance based on the declaration made by the candidate and my association as guide for carrying out this work, I recommend this project report for evaluation as a partial requirement of the MBA Programme of Veer Narmad South Gujarat University, Surat. DATE: PROF ANITHA THOMAS GRIMS, VAPI (PROJECT GUIDE) This project report is forwarded for the evaluation Vice/Voce Examination to the Veer Narmad South Gujarat University. DATE:...

Words: 12023 - Pages: 49

Premium Essay

Bp Oil

...Final Report on the Investigation of the     Macondo Well Blowout  Deepwater Horizon Study Group  March 1, 2011 The Deepwater Horizon Study Group (DHSG) was formed by members of the Center for Catastrophic Risk Management (CCRM) in May 2010 in response to the blowout of the Macondo well on April 20, 2010. A fundamental premise in the DHSG work is: we look back to understand the why‘s and how‘s of this disaster so we can better understand how best to go forward. The goal of the DHSG work is defining how to best move forward – assessing what major steps are needed to develop our national oil and gas resources in a reliable, responsible, and accountable manner. Deepwater Horizon Study Group Investigation of the Macondo Well Blowout Disaster This Page Intentionally Left Blank Deepwater Horizon Study Group Investigation of the Macondo Well Blowout Disaster In Memoriam  Jason Anderson Senior tool pusher Dewey Revette Driller Stephen Curtis Assistant driller Donald Clark Assistant driller Dale Burkeen Crane operator Karl Kleppinger Roughneck Adam Weise Roughneck Shane Roshto Roughneck Wyatt Kemp Derrick man Gordon Jones Mud engineer Blair Manuel Mud engineer 1 Deepwater Horizon Study Group Investigation of the Macondo Well Blowout Disaster In Memoriam The Environment 2 Deepwater Horizon Study Group Investigation of the Macondo Well Blowout Disaster Table of Contents  In Memoriam....................................................................

Words: 49923 - Pages: 200

Premium Essay

Electrical Electronics

...UNIVERSITY OF KERALA B. TECH DEGREE COURSE 2008 SCHEME ELECTRICAL AND ELECTRONICS ENGINEERING I to VIII SEMESTER SCHEME AND SYLLABUS BOARD OF STUDIES IN ENGINEERING AND FACULTY OF ENGINEERING AND TECHNOLOGY UNIVERSITY OF KERALA B.Tech Degree Course – 2008 Scheme REGULATIONS 1. Conditions for Admission Candidates for admission to the B.Tech degree course shall be required to have passed the Higher Secondary Examination, Kerala or 12th Standard V.H.S.E., C.B.S.E., I.S.C. or any examination accepted by the university as equivalent thereto obtaining not less than 50% in Mathematics and 50% in Mathematics, Physics and Chemistry/ Bio- technology/ Computer Science/ Biology put together, or a diploma in Engineering awarded by the Board of Technical Education, Kerala or an examination recognized as equivalent thereto after undergoing an institutional course of at least three years securing a minimum of 50 % marks in the final diploma examination subject to the usual concessions allowed for backward classes and other communities as specified from time to time. 2. Duration of the course i) The course for the B.Tech Degree shall extend over a period of four academic years comprising of eight semesters. The first and second semester shall be combined and each semester from third semester onwards shall cover the groups of subjects as given in the curriculum and scheme of examination ii) Each semester shall ordinarily comprise of not less than 400 working periods each of 60 minutes...

Words: 36386 - Pages: 146

Free Essay

Amorphous Thermoplastics

...16 Upon curing they shrink more as compared to amorphous thermoplastics. Examples are polypropylene (PP), polyethylene (PE) [1]. S. Amin and M. Amin In order to resolve the problem of low thermal and chemical stability of thermoplastic elastomers, dynamic vulcanization techniques were used in late ] plastic. In dynamic vulcanization the thermoplastic and elastomers are both cross-linked and physically mixed together. This gave rise to a second generation of thermoplastic elastomers which had better tensile strength and oil resistance as compared to those formed by physical mixing only [8]. ] ] ] _ were introduced which were made by same dynamic vulcanization process but using natural and butyl rubbers in place of EPR and EPDM. Natural and butyl rubbers have the advantages like low cost, very good over molding properties, reusable and very easily recyclable scrap [9,10]. Butyl rubber based thermoplastic elastomers have excellent adhesion with other thermoplastics hence it is still used to date for many over molding applications [11]. A list of common thermoplastic elastomers used in modern world is given in Table 1. 1.2.2. Amorphous thermoplastics They are usually transparent and have diffused melting point. The molecules are arranged randomly and ] ] _ to crystalline polymers. Upon curing they shrink less as compared to crystalline thermoplastics [3,4]. Examples are polycarbonate (PC), polymethylmethacrylate (PMMA), polystyrene (PS), polyphenylene oxide (PPO), acrylonitrile...

Words: 8784 - Pages: 36

Premium Essay

Zero Energy Buildings

...IMPLEMENTATION OF ENERGY EFFICIENCT AND RENEWABLE ENERGY TECHNOLOGIES TOWARDS ACHIEVING ZERO ENERGY BUILDINGS ABSTRACT As the energy consumption, industrial production and automobile usage around the world increases gradually, the efforts to meet the steadily increasing energy demand would leave the environment devastated. Traditional buildings consume as much as 40% of the primary energy consumed worldwide and are major contributors for greenhouse gases. Hence, with the intention of reducing the energy usage which reduces the environmental pollution energy efficient measures have been introduced. The goal of these measures is to decrease the energy use of the building substantially and provide the building's energy needs with on-site renewable energy supply like Photovoltaics. This results in a concept called Net zero energy buildings or Zero Energy Buildings. Zero energy building (ZEB) is a building with zero energy consumption i.e., it consumes only the amount of energy generated by the renewable power on the building site. NZEBs produce zero carbon emissions annually as various renewable energy technologies are deployed on the building site. This paper addresses the energy efficient measures that can be implemented to cut down the power consumption. The energy efficient features implemented in ZEBs for energy savings is justified with a case study. I. INTRODUCTION The environmental effects that Carbon dioxide (CO2) emissions across countries at different levels...

Words: 4748 - Pages: 19