Free Essay

Embeed System

In:

Submitted By harimagesh1
Words 1259
Pages 6
MINI PROJECT ON
AUTOMATIC STREET light

An introduction:

Needs no manual operation for switching ON and OFF. When there is need of light. It detects itself weather there is need for light or not. When darkness rises to a certain value then automatically street light is switched ON and when there is other source of light i.e. day time, the street light gets OFF. The sensitiveness of the street light can also be adjusted. In our project we have used three L.E.D for indication of bulb but for high power switching one can connect Relay (electromagnetic switch) at the output of pin 3 of I.C 555. Then it will be possible to turn ON/OFF any electrical appliances connected all the way through relay.

Principle :
This circuit uses a popular timer I.C 555. I.C 555 is connected as comparator with pin-6 connected with positive rail, the output goes high(1) when the trigger pin 2 is at lower then 1/3rd level of the supply voltage. Conversely the output goes low (0) when it is above 1/3rd level. So small change in the voltage of pin-2 is enough to change the level of output (pin-3) from 1 to 0 and 0 to 1. The output has only two states high and low and can not remain in any intermediate stage. It is powered by a 6V battery for portable use. The circuit is economic in power consumption. Pin 4, 6 and 8 is connected to the positive supply and pin 1 is grounded. To detect the present of an object we have used LDR and a source of light. LDR is a special type of resistance whose value depends on the brightness of the light which is falling on it. It has resistance of about 1 mega ohm when in total darkness, but a resistance of only about 5k ohms when brightness illuminated. It responds to a large part of light spectrum. We have made a potential divider circuit with LDR and 100K variable resistance connected in series. We know that voltage is directly proportional to conductance so more voltage we will get from this divider when LDR is getting light and low voltage in darkness. This divided voltage is given to pin 2 of IC 555. Variable resistance is so adjusted that it crosses potential of 1/3rd in brightness and fall below 1/3rd in darkness.
Sensitiveness can be adjusted by this variable resistance. As soon as LDR gets dark the voltage of pin 2 drops1/3rd of the supply voltage and pin 3 gets high and LED or buzzer which is connected to the output gets activated.

Component used
9v Battery with strip
Switch
L.D.R (Light Depending Resistance)
I.C NE555 with Base
L.E.D (Light Emitting Diode) 3 pieces.
Variable Resistance of 47 Kilo ohms

COMPONENTS :

a) Battery: For 9v power supply we can use 6pcs dry cell or 6F22 9v single piece battery.
b)Switch:Any general purpose switch can be used. Switch is used as circuit breaker.
c) L.D.R: (Light Depending Resistance) it is a special type of resistance whose value depends on the brightness of light which is falling on it. It has resistance of about 1mega ohm when in total darkness, but a resistance of only about 5k ohms when brightness illuminated. It responds to a large part of light spectrum.
d) L.E.D:
A diode is a component that only allows electricity to flow one way. It can be thought as a sort of one way street for electrons. Because of this characteristic, diode are used to transform or rectify AC voltage into a DC voltage. Diodes have two connections, an anode and a cathode. The cathode is the end on the schematic with the point of the triangle pointing towards a line. In other words, the triangle points toward that cathode. The anode is, of course, the opposite end. Current flows from the anode to the cathode. Light emitting diodes, or LEDs, differ from regular diodes in that when a voltage is applied, they emit light. This light can be red (most common), green, yellow, orange, blue (not very common), or infa red. LEDs are used as indicators, transmitters, etc. Most likely, a LED will never burn out like a regular lamp will and requires many times less current. Because LEDs act like regular diodes and will form a short if connected between + and -, a current limiting resistor is used to prevent that very thing. LEDs may or may not be drawn with the circle surrounding them.

e) Variable resistance:(Potentiometer)
Resistors are one of the most common electronic components. A resistor is a device that limits, or resists current. The current limiting ability or resistance is measured in ohms, represented by the Greek symbol Omega. Variable resistors (also called potentiometers or just “pots”) are resistors that have a variable resistance. You adjust the resistance by turning a shaft. This shaft moves a wiper across the actual resistor element. By changing the amounts of resistor between the wiper connection and the connection (s) to the resistor element, you can change the resistance. You will often see the resistance of resistors written with K (kilohms) after the number value. This means that there are that many thousands of ohms. For example, 1K is 1000 ohm,2K is 2000 ohm, 3.3K is 3300 ohm, etc. You may also see the suffix M (mega ohms). This simply means million. Resistors are also rated by their power handling capability. This is the amount of heat the resistor can take before it is destroyed. The power capability is measured in W (watts) Common wattages for variable resistors are 1/8W, 1/4W, 1/2W and 1W. Anything of a higher wattage is referred to as a rheostat
Connection pin is passed through the hole and is soldered.
WORKING:
When light falls on the LDR then its resistance decreases which results in increase of the voltage at pin 2 of the IC 555. IC 555 has got comparator inbuilt, which compares between the input voltage from pin2 and 1/3rd of the power supply voltage. When input falls below 1/3rd then output is set high otherwise it is set low. Since in brightness, input voltage rises so we obtain no positive voltage at output of pin 3 to drive relay or LED, besides in poor light condition we get output to energize.
Precautions:
a) LDR used should be sensitive.
Before using in the circuit it should be tested with multimeter.
b) I.C should not be heated too much while soldering, can destroy the I.C. For safety and easy to replace, use of I.C base is suggested. While placing the I.C pin no 1 should be made sure at right hole.
c) Opposite polarity of battery can destroy I.C so please check the polarity before switching ON the circuit. One should use diode in series with switch for safety since diode allows flowing current in one direction only.
d) L.E.D glows in forward bias only so incorrect polarity of L.E.D will not glow. Out put voltage of our project is 7.3 volt therefore 4 LED in series can be easily used with out resistance.
e) Each component should be soldered neat and clean. We should check for any dry soldered.
f) LDR should be so adjusted that it should not get light from streetlight itself. THANK YOU..............

Similar Documents

Premium Essay

Management Information Sytems

...for watching video? Can you identify any shortcomings of the device? 2. Compare the capabilities of the Kindle to the iPad. Which is a better device for reading books? Explain your answer. 3. Would you like to use an iPad or Kindle for the books you use in your college courses or read for pleasure instead of traditional print publications? Why or why not? II Porter’s competitive forces model helps companies develop competitive strategies using information systems. In this context answer the following questions: 1. Define Porter’s competitive forces model and explain how it works. 2. Describe what the competitive forces model explains about competitive advantage. 3. List and describe four competitive strategies enabled by information systems that firms can pursue. 4. Describe how information systems can support each of these competitive strategies and give examples. 5. Explain why aligning IT with business objectives is essential for strategic use of systems. III Discussion Questions 1. It has been said that there is no such thing as a sustainable competitive advantage. Do you agree? Why or why not? 2. It has been said that the advantage that leading-edge retailers such as Dell and Wal-Mart have over their competition isn’t technology; it’s their management. Do you agree? Why or why not? 3. What are some of the issues to consider in determining whether the Internet would provide your business with a...

Words: 296 - Pages: 2

Free Essay

Social

...Structural functional theory is when society is a complex system of interconnected and interrelated social structures each having a function and working together to promote social stability. One hundred million people shop at Wal-Mart every week. Wal-Mart is very convenient for people to shop at. Most people do not even have to shop at other stores because Wal-Mart has everything. It’s also convenient because it is right around the corner from a lot of customers houses; they don’t have to travel far to find a Wal-Mart store so they save gas. People already know that Wal-Mart has the lowest prices so they don’t have to search for stores with low prices. The items sold are good quality as well as cheap. What more could someone ask for. Wal-Mart is a world leader in logistics and promotes greater efficiency between its suppliers. Bob McAdam who is the Wal-Mart vice president states in the video, “We are raising the standard of living through lowering the cost of goods for people.” He is saying that Wal-Mart is good for Structural functional theory is when society is a complex system of interconnected and interrelated social structures each having a function and working together to promote social stability. One hundred million people shop at Wal-Mart every week. Wal-Mart is very convenient for people to shop at. Most people do not even have to shop at other stores because Wal-Mart has everything. It’s also convenient because it is right around the corner from a lot of customers houses;...

Words: 1849 - Pages: 8

Premium Essay

Summary Mullins

...The systems approach Attempts to reconcile the classical approach (emphasised the technical requirements of the organisation and its needs) with the human relations approach (emphasised the psychological and social aspects, and the consideration of humans needs). The attention is focused on the total work organization and the interrelationship of structure and behavior, and the range of the variables within the organisation. The principal idea is that any part of an organisations activities affects all others parts. The business organisation is an open system, there is continual interaction with the broader external environment of which it is part. The systems approach views the organisation within its total environment and emphasies the importance of multiple channels of interaction. The systems approachs views the organisation as a whole and involves the study of the organisations in terms of the relationships between technical and social variables within the system. The contingency approach This approach explain that the most appropriate structure and system pf management is therefore dependent upon the contingencies of the situation for each particular organisation, this approach implies that the organisation theory shouldn’t seek to suggest one best way to structure or manage organisation but should provide insights into the situational and contextual factors which influence management decisions. Other approaches to the study of organisations: -The decision-making...

Words: 366 - Pages: 2

Premium Essay

Miss M Mei

...Chapter 1: Two Different Worldviews   The Framework of Individual Psychology   The Framework of Systemic Family Therapy   Basic Concepts of Systems Theory and Cybernetics   Family Therapy or Relationship Therapy?   Summary    Chapter 2: The Historical Perspective   Planting the Seeds: The 1940s   Cybernetics   Development of Interdisciplinary Approaches   Gregory Bateson   Putting Down Roots: The 1950s   Bateson (Continued)    The Double-Bind Hypothesis   Nathan Ackerman   Murray Bowen   Carl Whitaker   Theodore Lidz   Lyman Wynne   Ivan Boszormenyi-Nagy   John Elderkin Bell   Christian F. Midelfort  Overview of the 1950s   The Plant Begins to Bud: The 1960s   Paradigm Shift   The MRI   Salvador Minuchin   Other Developments   Blossom Time: The 1970s   Psychodynamic Approaches   Natural Systems Theory   Experiential Approaches  Structural Approaches   Strategic Approaches   Communication Approaches   Behavioral Approaches   Gregory Bateson   Connecting and Integrating: The 1980s   Other Voices   The Limits of History   Controversy, Conflict, and Beyond: The 1990s   The Feminist Critique   Family Therapy and Family Medicine   Integration and Metaframeworks   Managed Care   The Twenty-First Century: Continuing Concerns and Emerging Trends   Summary   Chapter 3: The Paradigmatic Shift of Systems Theory   A Cybernetic Epistemology   Recursion   Feedback   Morphostasis/Morphogenesis   Rules and Boundaries   Openness/Closedness   ...

Words: 954 - Pages: 4

Premium Essay

Know and How Reflections

...first lectures of the course show an empirical and theoretical view of the major principles of the organizational design as well as the alternative design forms. The stakeholders, both insiders and outsiders, and their behavior or relations of cooperation and competition suppose an analysis need that provides them of a huge importance. I also realize about the importance of the agency theory and the problems and remedies caused, improving the importance of efficient corporate governance. This need of a good organization is solved by the systems theory, ”Organizations are systems of interdependent activities linking shifting coalitions of participants; the systems are embedded in – dependent on continuing exchange with and constituted by – the environments in which they operate”. (Scott, 1998:28). The systems which formed the organization have a common target and are classified in three levels based on their relevance. Both, stakeholders and systems, needs an analysis in order to get success in our procedures and adapt the venture structure to the different organizational designs provided in the lectures. After understanding these concepts, the lectures focused on the relation between the main management factors (Vision and mission) and the drivers analyzed, providing goals and strategies to the organization. As important as the creative process is the analysis to know the organizational boundaries, which let the organization look for available goals based on the efficiency and effectiveness...

Words: 824 - Pages: 4

Premium Essay

Dfsh

...for watching video? Can you identify any shortcomings of the device? 2. Compare the capabilities of the Kindle to the iPad. Which is a better device for reading books? Explain your answer. 3. Would you like to use an iPad or Kindle for the books you use in your college courses or read for pleasure instead of traditional print publications? Why or why not? II Porter’s competitive forces model helps companies develop competitive strategies using information systems. In this context answer the following questions: 1. Define Porter’s competitive forces model and explain how it works. 2. Describe what the competitive forces model explains about competitive advantage. 3. List and describe four competitive strategies enabled by information systems that firms can pursue. 4. Describe how information systems can support each of these competitive strategies and give examples. 5. Explain why aligning IT with business objectives is essential for strategic use of systems. III Discussion Questions 1. It has been said that there is no such thing as a sustainable competitive advantage. Do you agree? Why or why not? 2. It has been said that the advantage that leading-edge retailers such as Dell and Wal-Mart have over their competition isn’t technology; it’s their management. Do you agree? Why or why not? 3. What are some of the issues to consider in determining whether the Internet would provide your business with a...

Words: 296 - Pages: 2

Premium Essay

Organizations as a System.

...Organizations as a system. A system is a whole made up of parts. Each part can affect the way other parts work and the way all parts work together will determine how well the system works. when can look at business organization as a system because it conforms to the system definition; it recognizes the interrelationships of people, processes, decisions and designs organizational structure in order to realize its projected economic goal. An organization with a good designed system will requires an understanding of how all the parts (for instance, HR department, production department, logistic department, finance department, sales department, marketing department, IT department …etc) fit together as a whole, an intimate understanding of the parts themselves for a better understanding of endogenous event and a full awareness of the organization’s environment including the other external systems to which it is connected to better prepare for exogenous changes. Some hypothetical problems that disrupt the balance of the an organization would be a coordination or communication issue between departments, for instance HR department not selecting adequate candidate for a specific job skill because it did not have all relevant information about the job, or for instance marketing department lunches a new product without integrating logistic department in the project which may cause delays of production and order fulfillment issues. Another issue that may disrupt the balance of the system is exogenous...

Words: 450 - Pages: 2

Free Essay

Computational Chemistry

...PubMed Abstract: Retroviral capsid proteins are conserved structurally but assemble into different morphologies. The mature human immunodeficiency virus-1 (HIV-1) capsid is best described by a 'fullerene cone' model, in which hexamers of the capsid protein are linked to form a hexagonal surface lattice that is closed by incorporating 12 capsid-protein pentamers. HIV-1 capsid protein contains an amino-terminal domain (NTD) comprising seven α-helices and a β-hairpin, a carboxy-terminal domain (CTD) comprising four α-helices, and a flexible linker with a 310-helix connecting the two structural domains. Structures of the capsid-protein assembly units have been determined by X-ray crystallography; however, structural information regarding the assembled capsid and the contacts between the assembly units is incomplete. Here we report the cryo-electron microscopy structure of a tubular HIV-1 capsid-protein assembly at 8 Å resolution and the three-dimensional structure of a native HIV-1 core by cryo-electron tomography. The structure of the tubular assembly shows, at the three-fold interface, a three-helix bundle with critical hydrophobic interactions. Mutagenesis studies confirm that hydrophobic residues in the centre of the three-helix bundle are crucial for capsid assembly and stability, and for viral infectivity. The cryo-electron-microscopy structures enable modelling by large-scale molecular dynamics simulation, resulting in all-atom models for the hexamer-of-hexamer and pentamer-of-hexamer...

Words: 274 - Pages: 2

Free Essay

My Thought on 2go

...well: This chapter involves review of previous studies and researches carried out which were found to be related to this presently. Detailed review of literature was carried out to cover the following study areas as shown: - Organizations - Management - Motivation (Reward) and its theories - Relevance of motivation (reward) on productivity. 2.2 ORGANIZATION Organization can be defined as two or more people who work together in structured way achieve a specific goal or goals. Organization can be defined form diverse perspectives. According to Scott (1981) these are there perspective for defining organization these are: 1. Organization as rational systems. 2. Organization as natural systems. 3. Organizations an open system. Organization as Rational Systems: The definition of Organizations as a rational system emphasizes two major characteristic of Organizations. a. Specification of goals b. Formalization of structure. According or Barnard (1938) “formal Organization is that kind of cooperation concision of men that are conscious l deliberate and purposeful Scott (1981). Defines an Organization as a collectively oriented to the pursuit of relatively specific goals an exhibiting a relatively highly formalized social...

Words: 272 - Pages: 2

Free Essay

Hrdv 55630

...Nakelya Moragne 03-18-2014 HRDV 5630 QE S2 2.) How does OD differ from a single-change technique such as management training? Answer: OD represents a systems approach that is concerned with the interrelationship of various divisions, departments, groups, and individuals as interdependent subsystems of the total organization. A single technique such as management training is aimed at changing individual behavior, whereas OD is focused on the larger goal of developing an organization-wide improvement in managerial style. OD uses many different techniques and no single technique represents the OD discipline. 5.) Explain three basic responses an individual may have to socialization. Socialization is the process that adapts employees to the organization’s culture. An individual may respond to the socialization in three basic ways. The notion of socialization has been primarily a result of the inequality that exist within the capital system, as a result of the relationship present between the capitalist and the workers strata of the society. Though the response of capitalism to socialization has traditionally been harsh claiming it to be against the right of ownership for which the capitalist system stands for, the response have been changing in its magnitude from time to time. In today’s world where we are witnessing such acute difference in the wealth distribution in different parts of the world. Individuals may be worried about how they’re going to interact with their...

Words: 1238 - Pages: 5

Free Essay

Cis 510 Week 7 Assignment 3

...outside of the suggested resources in this assignment. Note: Wikipedia and similar Websites do not qualify as quality resources. Your assignment must follow these formatting requirements: Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format. Check with your professor for any additional instructions. Include a cover page containing the title of the assignment, your name, the professor’s name, the course title, and the date. The cover page and the reference page are not included in the required assignment page length. The specific course learning outcomes associated with this assignment are: Design high-level logical system characteristics (user interface design, design of data and information requirements). Develop clear and concise business requirements documents and convert them into technical specifications. Use technology and information resources to research issues in...

Words: 322 - Pages: 2

Premium Essay

10th Malaysian Plan

...Manager, Telecoms & Broadcast Services * Managing existing clientele and building new potential customers in the assigned territory * Responsible for developing, positioning and selling the broadcast service across the region * Continually building and improving the broadband, multimedia and broadcast services thru innovative pre-sales and marketing activities. * Working closely with engineering and product team to improve delivery of Speedcast products and services. MEASAT Satellite Systems – Assistant Manager, Ground Engineering * To co-ordinate, monitor and perform all ground systems equipment and VAS maintenance and operations; * To perform anomaly / fault investigation and produce appropriate documentation / technical reports as directed; * To develop new testing procedure and suggest procedure enhancement for increase operating efficiency; * To participate in the procuring, commissioning and testing of new earth station or VAS systems. Be part of the...

Words: 499 - Pages: 2

Premium Essay

Cyp 3.1 Explain The Significance Of The Study

...hospital) the clinical benefits or acts supplied by a group of establishments, programs, health equipment, professional and technical, and self-help organisations (Users and family), which may even have different dependencies administrative and / or financial, public or private. The various network components They must be articulated consistently so as to ensure the diversity and intensity of the care required by the patient and family, continuity of care, existence of different levels of resolution, and access to promotion measures and health protection. The network of mental health and psychiatry should be part of the network general health, understanding that people with mental illness need and should have ready access to the entire health system, as well as people they are suffering from any other disease. The existence of a network of mental health and psychiatry means the user is indeed a network user, and therefore has access to diversity of services, hinged together to meet their needs, any stage of the process health-disease (Damschroder, et.al, 2009). The CAHMS, the first trench crisis go mental patients suffering decompensating and our work is to provide a space for working together, to understand what has led them to accompany them in distress and psychic reorganisation. However there are patients who do not progress, that “people” are made in the centres and those who find it really hard to make a circuit work. As clinical psychologists and psycho-therapists psychoanalytic...

Words: 1558 - Pages: 7

Free Essay

Hsa Health Service Administration

...Give five different examples of simple systems and include the input(s), conversion process, and output(s)? Ensure that there is some feedback between your examples. Appointment –scheduling process of an ambulatory care center as a simple system. Inputs to the system consist, of appointment request from patients; physician schedules; and clinic resources, including personnel, set of actions; the scheduling clerks collect information from patents, match patient requirements to available time slots, and make appointment. Output of this simple system becomes the input for several other functional systems of the clinic, such as, medical records, patient accounting, and others. The conversion process includes a set of actions; scheduling clerks collect information from patients, match requirements to available time slots, and make appointments. The feedback will occur in the form of adjusted information on the number of time slot available as patients are scheduled for the clinic. (Austin and Boxerman’s, 2007). Admission- the admissions representative works in a team environment to facilitate admissions recruitment and the registration processes for that specific ambulatory care center. This position requires heavy outbound call volume, appointment scheduling, and handling of telephone, mail-in, walk-in, and internet-based (Alpine-college, 2009). The output for this simple system also becomes the input for several other functional systems of the clinic, such as, building a strong...

Words: 1268 - Pages: 6

Free Essay

Hola

...Individual Report What I understand about Systems Engineering is that, is an area that focus in the structure, management and logistic of a project. I think this area is very important in the field of engineering. Because they are like the roots of the project. Is like putting everything in order to have a logistic and to work with a same direction. In this class I learn a lot of things that I can apply in the engineering field. As it was passing the semester I understand things that when I came into this class, there were not clarified at all. In the project we were assign to do as the semester was passing I learned a lot of things helpful in the field of engineering. My team members and I at the beginning, we were confuse of what to present in our project. We change the topic like two times. But finally as a team we decide to do the project in the fabrication of Ecological Tires, which are better for the environment and reduce pollution. In the project I learned how to make the Conceptual Design, Preliminary Design and Detailed Design of a project. To make the Conceptual, Preliminary and Detailed Design, I learned how to do Need Statements, SE Process Diagrams, Tradeoff Studies, Operational Requirements, Design Requirements, Functional Diagrams Serial, Logical Diagrams, ICOM Diagrams, Risk Analysis, Migration Plans, System Reliability, System Integrations, etc… To make the project first of all, we make the Need Statement. They can be different Needs Statements...

Words: 954 - Pages: 4