...1. Answer the following questions about the feasibility analysis: a. What is a feasibility analysis? When should it be conducted? i. A Feasibility analysis is the process of determining if a business is viable and is an assessment of potential business. It should be conducted before the startup of a business and if business begins to fall short in more than one area involving the four components, the business should either be dropped or rethought. b. Why is it important to conduct a feasibility analysis? i. The feasibility analysis requires both primary and secondary research and is important because it determines if a business is viable or not and whether its purposes needs to be discarded or revaluated for the success of the business entering the market. Sometimes going “back to the drawing board” is the best idea a future business owner can make. c. What are the 4 parts of a feasibility analysis? Explain each part briefly. i. The four components of the feasibility and they are as follows: 1. Product/Service Feasibility – Is the product or service desirable? Is it in demand? 2. Industry/Target Market Feasibility – Is the industry attractive in the market? Is it attractive to the target market? 3. Organizational Feasibility – Are its resources sufficient? Is the management feasible? 4. Financial Feasibility – Does the business have the total start up cash needed? Is the financial performance efficient? This is the overall financial attractiveness of the...
Words: 1061 - Pages: 5
...Pre-Feasibility Study LADIES SHOES MANUFACTURING UNIT Small and Medium Enterprise Development Authority Government of Pakistan www.smeda.org.pk HEAD OFFICE 6th Floor LDA Plaza Egerton Road, Lahore Tel (042)111 111 456, Fax: (042) 36304926-7 helpdesk@smeda.org.pk REGIONAL OFFICE REGIONAL OFFICE REGIONAL OFFICE REGIONAL OFFICE PUNJAB SINDH KHYBER PAKTUNKHWA BALOCHISTAN 8th Floor LDA Plaza, Egerton Road, Lahore. Tel: (042) 111 111 456, Fax: (042) 36370474 helpdesk.punjab@smeda.org.pk 5TH Floor, Bahria Complex II, M.T. Khan Road, Karachi. Tel: (021) 111-111-456 Fax: (021) 5610572 helpdesk.sindh@smeda.org.pk Ground Floor State Life Building The Mall, Peshawar. Tel: (091)111 111 456, 9213046-7 Fax: (091) 286908 helpdesk.NWFP@smeda.org.pk Bungalow No. 15-A Chamn Housing Scheme Airport Road, Quetta. Tel: (081) 2831623, 2831702 Fax: (081) 2831922 helpdesk.balochistan@smeda.org.pk June, 2011 Pre-feasibility Study Ladies Shoes Manufacturing Unit 1 EXECUTIVE SUMMARY................................................................................................................. 4 2 INTRODUCTION TO SMEDA ........................................................................................................ 5 3 PURPOSE OF THE DOCUMENT ................................................................................................... 5 4 PROJECT PROFILE .......................................
Words: 9788 - Pages: 40
...Feasibility Study and Business Plan – Al Hayat ECOFIN Research Services Feasibility Study and Business Plan to set up a Domestic Electrical Appliances Distribution Company in Saudi Arabia Al Hayat International Holding Co., Saudi Arabia Sole Distributor of Green World Electronics Co., USA September 22, 2008 1 Feasibility Study and Business Plan – Al Hayat Content 1. Executive Summary 2. Introduction - Al-Hayat International Holding Co. 2.1. About ECOFIN Research Services 2.2. About the Promoter 2.3. Project Background 2.4. The Franchise Concept 2.5. About Green World Electronics Co. ECOFIN Research Services Page 07 11 11 11 14 14 15 3. Success Stories of Electronics Retailing and Distribution Companies around the World17 3.1. Best Buy 3.2. GOME Electrical Appliances Holding Ltd. 3.3. Jumbo Electronics Co. 3.4. Media Market 3.5. NEXT Retail India Ltd. 17 18 20 22 24 4. Favorable Investment Environment 4.1. Investment Climate in Saudi Arabia 4.2. Overview of the Retail Industry in Saudi Arabia 4.3. Saudi Domestic Electrical Appliances Sector 4.4. Key Drivers for Saudi Domestic Electrical Appliance Industry 4.5. Saudi Domestic Electrical Appliance Industry – Major Trends and Forecast 4.6. Conclusion 27 27 33 40 43 55 56 5. Al-Hayat International Holding Co: Strategic Planning 5.1. Stakeholder analysis 5.2. Vision 5.3. Mission 5.4. Strategic Objectives 5.5. USP 58 58 58 58 58 58 6. The Business Plan 6.1. Product and Portfolio Analysis 6.2. Market Segmentation, Targeting...
Words: 64347 - Pages: 258
...Full Feasibility Analysis From “Preparing Effective Business Plans” by Bruce R. Barringer Note: All fields can be expanded to provide additional space to respond to the questions. A copy of this template, along with each of the assessment tools, is also available in PDF format at the authors’ Web site at www.prenhall.com/entrepreneurship. Introduction A. Name of the proposed business B. Name of the founder (or founders) C. One paragraph summary of the business Part 1: Product/Service Feasibility Issues Addressed in This Part A. Product/service desirability B. Product/service demand Assessment Tools Concept Statement Test • Write a concept statement for your product/service idea. Show the concept statement to 5 to 10 people. Select people who will give you informed and candid feedback. • Attached a blank sheet to the concept statement, and ask the people who read the statement to (1) tell you three things they like about your product/service idea, (2) provide three suggestions for making it better, (3) tell you whether they think the product or service idea is feasible (or will be successful), and (4) share any additional comments or suggestions. • Summarize the information you obtain from the concept statement into the following three categories: * Strengths of the product or service idea—things people who evaluated your product or service concept said they “liked” about the idea * Suggestions for strengthening the idea—suggestions made by people...
Words: 1291 - Pages: 6
...A FEASIBILITY STUDY IN ESTABLISHING “FAM MART” AT CONCEPCION M. TRIAS ROAD SAN JUAN 1 GENERAL TRIAS, CAVITE S.Y.2015-2016 A Feasibility Study Presented to the Faculty of the Cavite State University- Rosario Rosario, Cavite In Partial Fulfillment Of the Requirements for the Degree Bachelor of Science in Business Management by ANTHONY JOSHUA BANDIOLA MARY ROSE GATDULA FLORENCE ROMEN 2015 SUMMARY OF THE PROJECT A. Name of the Project The proposed business will operate under the proposed name “FAM MART”. FAM comes from the initial of the first letter name of the owners of this project, and it is the short term for Family, because the basic needs of one family is available in this business. B. Plant Location “FAM MART” will be situated at Concepcion M. Trias Road San Juan 1, General Trias, Cavite – near the intersection of San Juan 1. The location of the proposed business is accessible. C. Description of the Project In an unexpected brainstorming 3 students who is in the same class think a business that they should establish in a certain area of General Trias Cavite. The business is named by FAM MART, a grocery store where you can buy in bulk, whole selling, and retail. It is establish for the preference of the people around the area. The store contains basic needs of consumers and for they everyday use. D. Project Long Range After five (5) years of successful operation and as long as the business...
Words: 375 - Pages: 2
...CHAPTER I The Problem This chapter discusses the background, objectives, significance of the study, scope and limitations, data gathering process and the research design and methodology. 1.1 Background and Rationale of the Study Airsoft is one of the newest and fastest growing sport in the Philippines. It is somewhat similar to paintball in that your primary goal is to shoot your opponent with an air-powered weapon but that is where the similarities end. Most paintballers play in small field with brightly colored flashy uniforms. Airsofter's on the other hand prefer MilSim (Military Simulation). Devised to be an example of combat sports that required relatively little preparation but was capable of entertaining participants for several hours, the sport quickly began to spread, and is today found in many places around North America and Europe. Airsoft enthusiasts tend to organize clubs that are referred to as meetings, and often structure their games along military lines. However, there are airsoft meetings that specialize in historical reenactments of famous battles, as well as some meetings that provide choreographed simulations for the wider community. Outdoor fields are often preferred because it provides a more realistic environment. It is also a great place for items that may end up in the dump to be recycled as course obstacles and structures. When shooting outside, environmentally friendly ammunition should be used to avoid build up on the outdoor airsoft...
Words: 1498 - Pages: 6
...Sample Feasibility Study I. Summary of the Project A. MAXIMUS’ SANDWICH BAR B. Beside Arellano University Pasig C. A combination of a sandwich restaurant and a classic bar where students from the university can eat and at the same time have fun whenever they want. 1. The idea of the business came about when I, the entrepreneur, felt the want to eat a sandwich but wasn’t able to find a decent one. 2. The nature of the business is food restaurant and at the same time a bar. 3. Sole Entrepreneurship 4. 5. A. Leonardo Anthony Isiah O. Eleazar a. Owner and manager of the business b. Graduate of B.S in Business Administration La Salle University B. Mark Ilagan a. Graduate of B.S. in Business Administration Far Eastern University C. Jerome Tobilla a. Graduate of Culinary Arts Central Colleges of the Philippines D. Amer Nasife a. Graduate of HRM University of the East E. Honesimo Pamo Jr. a. Graduate of HR Arellano University F. Jefferson Gonzales a. Graduate of Financial Management San Beda College II. Economic Aspects A. Market Study * Target customers would be the students of the university. * Services offered would be: different flavors, styles of sandwiches, a night bar where college students can go for partying or special celebrations. * Yes, there is a good demand for our business. * The sandwiches would have a higher demand because it’s delicious ad it’s for all ages. * Our sandwiches have different flavors...
Words: 327 - Pages: 2
...Enterprise resource planning (ERP) is business management software—usually a suite of integrated applications—that a company can use to store and manage data from every stage of business, including: Product planning, cost and development Manufacturing Marketing and sales Inventory management Shipping and payment ERP provides an integrated real-time view of core business processes, using common databases maintained by a database management system. ERP systems track business resources—cash, raw materials, production capacity—and the status of business commitments: orders, purchase orders, and payroll. The applications that make up the system share data across the various departments (manufacturing, purchasing, sales, accounting, etc.) that entered the data. ERP facilitates information flow between all business functions, and manages connections to outside stakeholders.[1] Enterprise system software is a multi-billion dollar industry that produces components that support a variety of business functions. IT investments have become the largest category of capital expenditure in United States-based businesses over the past decade. Though early ERP systems focused on large enterprises, smaller enterprises increasingly use ERP systems.[2] Organizations consider the ERP system a vital organizational tool because it integrates varied organizational systems and facilitates error-free transactions and production. However, ERP system development is different from traditional systems...
Words: 459 - Pages: 2
...COMPUTATION OF THE GENERATION CHARGE FOR AUGUST 2014 a (Applicable for Customers Not Under Meralco TOU) Based on July 2014 Generation Costs (A) (B) (C) Basic Generation Cost (PhP million) 582.13 828.98 49.30 802.09 2,628.28 635.84 491.37 6,018.00 1,112.61 2,515.97 1,420.46 5,049.04 1,391.43 6.86 0.52 1.20 0.55 9.15 12,467.62 (D) Other Cost Adjustmentsb (PhP million) (0.02) (9.54) (1.44) (31.94) (3.38) 20.47 (25.85) (10.96) (23.85) (14.92) (49.73) 869.80 0.02 0.00 0.00 0.02 794.24 (E = C + D) Total Gen Cost for the Month (PhP million) 582.11 819.44 47.86 770.15 2,624.90 635.84 511.84 5,992.15 1,101.65 2,492.12 1,405.54 4,999.31 2,261.23 6.88 0.52 1.20 0.55 9.17 13,261.86 (F = E/A) Average Gen Cost (July 2014) (PhP/kWh) 3.4881 4.2152 4.3380 3.6371 4.5419 9.0235 11.0741 4.6862 4.4301 5.5925 5.1672 5.1736 13.3372 3.9727 5.2743 4.0706 5.0056 4.0953 5.4874 (0.0150) 0.0000 0.0003 0.0118 0.1507 g (G) Average Gen Cost (June 2014) (PhP/kWh) 3.3717 3.7857 3.8216 4.1455 4.7161 9.7002 9.9409 4.6350 4.5576 5.3101 5.4727 5.1715 12.1216 4.2861 4.2310 4.3501 5.0056 4.3175 5.2781 (0.0124) 0.0001 0.0008 0.0062 0.1344 (H = F - G) Source Disptachc A. Power Supply Agreements (PSAs) 1. SEM-Calaca Power Corp. (SCPC) 85.9% 2. Masinloc Power Partners Corp. (MPPC) 100.0% 3. Therma Luzon Inc. (TLI) 6.1% 4. San Miguel Energy Corp. (SMEC) 89.1% 5. South Premiere Power Corp. (SPPC) 74.3% 6. Therma Mobile Inc. (TMO) 48.9% 7. Othersd 31.5% Subtotal 67.1% B. Power Purchase Agreements (PPAs/IPPs) 1. Quezon...
Words: 809 - Pages: 4
...WHY I’M PASSIONATE ABOUT REAL ESTATE? Return: In most of the markets real estate investments perform better than equities and other asset classes. In emerging markets probably you have to go for development projects, as rental yield is not very attractive. In most of the developed markets real estate has performed better than stock market over time. And by leveraging your investment you can increase your return on equity many folds. Cash flow component in return: This one of the best thing about real estate investments – it behaves like a fixed income security, and with better yield. Rental income makes real estate more attractive even during tough time and many investors love to focus on the cash flow. Depreciation: You can’t depreciate your stocks, bonds and mutual funds. Depreciation is a gift from the government for real estate investors. Dampening of volatility in the portfolio: Real estate prices don’t fluctuate on daily basis. Fully optimized portfolios with real estate component in it have much lower volatility. Inflation hedge: real estate investments provide a good hedge against inflation. Rents usually increase with inflation, while mortgage payments on the property remain stable. This increases cash flow component. WHY SHOULD YOU NOT INVEST IN REAL ESTATE? Illiquid: Many a times real estate investments behave like illiquid assets. Generally it takes time to execute an actual exit, and liquidity can completely disappear from the market in tough times. Management...
Words: 1933 - Pages: 8
...A feasibility study is a short, focused study that should take place early in the RE process. It should answer three key questions: a) does the system contribute to the overall objectives of the organization? b) can the system be implemented within schedule and budget using current technology? and c) can the system be integrated with other systems that are used? If the answer to any of these questions is no, you should probably not go ahead with the project. Feasibility study An estimate is made of whether the identified user needs may be satisfied using current software and hardware technologies. The study considers whether the proposed system will be cost-effective from a business point of view and if it can be developed within existing budgetary constraints. A feasibility study should be relatively cheap and quick. The result should inform the decision of whether or not to go ahead with a more detailed analysis. Feasibility studies The aims of a feasibility study are to find out whether the system is worth implementing and if it can be implemented, given the existing budget and schedule. The input to the feasibility study is a set of preliminary business requirements, an outline description of the system and how the system is intended to support business processes. The results of the feasibility study should be a report that recommends whether or not it is worth carrying on with the requirements engineering and system development process. If a system does...
Words: 544 - Pages: 3
...to determine whether or not the planned investment idea is feasible. The feasibility of an investment has to be considered with respect to several different aspects in order to determine whether the investment should be realized or not. Carrying out a feasibility analysis is therefore one of the most critical steps in the decision-making process. A feasibility analysis is an effective analytical tool that can be used to evaluate investments from various perspectives, e.g. technical, social, legal, financial, market, and organizational. Financial feasibility is often a predominant factor in feasibility analysis, as most investments are not realized if they do not generate profit for the project owners. The focus of this thesis is on financial feasibility analysis and its application in the decision-making process. Precision and reliability of feasibility analysis relies on the accuracy of information used in the analysis. The appropriate level of detail has to be decided with respect to what stage the investment is on. On early stages the level of uncertainty is often high, but as the investment opportunity evolves information become more detailed and reliable. As uncertainty can highly affect the results of the analysis, the level of detail has to be taken into account when basing decisions on the results. To assess the feasibility of investments relevant criteria have to be chosen. Feasibility calculations need to be done with care and the complexity of the calculations...
Words: 7292 - Pages: 30
...FINANCING OF FEASIBILITY STUDIES Through its MSME Support Fund, BIO grants subsidies to co-finance feasibility studies. The feasibility study is a necessaryphase prior to the creation or development of a company. It has to be conducted by a third partuy expert. It aims to prove the technical viability and profitability of a project, and is a prerequisite to draw up a business plan. SUBSIDIES The MSME Support Fund grants non-reimbursable subsidies to fund experts who will carry out feasibility studies. These studies include all technical, commercial, financial and regulatory information necessary for the investment decision process. This process should enable the creation and development of businesses in developing countries. Furthermore, the studies are conditioned by subsequent financing by BIO of the investment phase. AMOUNTS The subsidy granted by the MSME Support Fund may account for as much as 50% of the total cost, with a limit of EUR 100,000 per project. BENEFICIARIES Subsidies are granted to local enterprises, intermediary structures geared towards local SMEs, as well as infrastructure projects. CRITERIA Applications for feasibility studies must meet a certain number of formal criteria, such as the business’ sector or the estimated time-span of operations. BIO more specifically evaluates the sponsors’ quality (particularly their economic performance, their financial involvement in the project and their stance towards corporate governance),...
Words: 540 - Pages: 3
...FEASIBILITY STUDIES: WHY AND WHAT SHOULD THEY ENTAIL? P. Ries Asset Resource Management LLC I have been asked to present a paper addressing feasibility studies, as they relate to consideration of a digester project for large dairies. I am hoping to answer the following questions, so that you, as a dairy producer, can properly address whether or not a digester project fits within your overall business model, that is, successfully managing and operating a large scale dairy operation. As I said, the questions I hope to answer for you are as follows: 1. 2. 3. 4. 5. What is a feasibility study? Why is a feasibility study important? What should be included? Who should do a feasibility study? How much should they cost? 1. What is a feasibility study? A feasibility study is an analysis and evaluation of a proposed project to determine if it is a. technically feasible; b. is feasible within the estimated cost; and c. will be profitable. I am focusing my presentation on feasibility studies of digester projects, because that is why I’ve been asked to make this presentation. However, one should be able to use these same concepts when considering any opportunity your farm might consider, especially where large sums of money are at stake. With respect to digester projects, the technical concepts of collecting the cow manure, pumping it into a digester, producing methane gas, and using this methane gas to power turbines, which in turn produce electricity, is a proven technology, and no further...
Words: 3556 - Pages: 15
...Pre-Feasibility Study POTATO CHIPS MANUFACTURING UNIT Small and Medium Enterprise Development Authority Government of Pakistan www.smeda.org.pk HEAD OFFICE 6th & 8th Floor LDA Plaza, Egerton Road, Lahore. Tel: (042) 111-111-456Fax: (042) 6304926-7 Helpdesk@smeda.org.pk REGIONAL OFFICE PUNJAB REGIONAL OFFICE SINDH 5TH Floor, Bahria Complex II, M.T. Khan Road, Karachi. Tel: (021) 111-111-456 Fax: (021) 5610572 Helpdesk-khi@smeda.org.pk REGIONAL OFFICE NWFP Ground Floor State Life Building The Mall, Peshawar. Tel: (091) 9213046-47 Fax: (091) 286908 helpdesk-pew@smeda.org.pk REGIONAL OFFICE BALOCHISTAN Bungalow No. 15-A Chaman Housing Scheme Airport Road, Quetta. Tel: (081) 831623, 831702 Fax: (081) 831922 helpdesk-qta@smeda.org.pk 8th Floor LDA Plaza, Egerton Road, Lahore. Tel: (042) 111-111-456 Fax: (042) 6304926-7 helpdesk@smeda.org.pk February, 2006 Pre-feasibility Study Potato Chips Manufacturing Unit 1 2 PURPOSE OF THE DOCUMENT ............................................................................................... 4 CRUCIAL FACTORS & STEPS IN DECISION MAKING FOR INVESTMENT..................... 4 2.1 2.2 SWOT ANALYSIS ................................................................................................................... 4 KEY SUCCESS FACTORS / PRACTICAL TIPS FOR SUCCESS .......................................................... 5 3 PROJECT PROFILE..............................................................................
Words: 7212 - Pages: 29
