Hydrogen Production from Ethanol for Fuel Cell Applications
D.Kunzru Department of Chemical Engineering, I.I.T.Kanpur, Kanpur-208016 Email: dkunzru@iitk.ac.in Ethanol is a renewable resource as it can be produced from biomass without contributing to the greenhouse gas emissions. Reforming of ethanol to produce hydrogen is a potentially attractive process. The reactions involved include steam reforming followed by water-gas shift and selective oxidation of CO. The development of suitable catalysts for these reactions is crucial for the viability of the process. Recent studies suggest that the promising catalysts are supported Rh and Rh/Ni catalysts for steam reforming, Pt-ceria based catalysts for water-gas shift reaction and Pt-Rh or Cu-ceria catalysts for selective oxidation of CO. Microreactors are well-suited for fabricating microfuel processors for portable power applications. Further research on catalyst development and heat integration schemes is required to commercialize this process.

1. Introduction
Most of the energy we use today is obtained from non-renewable fossil fuels. This has not only depleted the reserves of fossil fuels, especially crude oil, but has also caused severe environmental pollution. Intense research efforts are being made to develop alternative renewable energy sources .In recent years , considerable effort has been expended in developing fuel cells. Hydrogen can be used in fuel cells to produce electricity very efficiently and cleanly, since the only by-product is water. It is expected that in the near future, hydrogen will be used, to a large extent, as a secondary energy carrier for the production of electricity for mobile and small-to-medium scale stationary applications. Barreto et al.(2003) have discussed the scenario for a sustainable hydrogen economy in the 21st century and concluded that fuel cells will play a major role in meeting the energy demands of the future. In order to support sustainable hydrogen economy, it is crucial to produce hydrogen cleanly from renewable resources. The conventional methods of hydrogen production are based on reforming of natural gas or naphtha. Among the different feedstocks available, alcohols are very promising candidates because these are easily decomposed in the presence of water and generate hydrogen-rich mixture at a relatively lower temperature. Steam reforming of methanol has been extensively studied in recent years ( Iwasa et al.,2003;Zhang and Shi,2003). The main drawback is its relatively high toxicity. Among the various processes proposed, steam reforming of ethanol for the production of hydrogen is very attractive because ethanol can be produced by fermentation of renewable resources like biomass, is easy to transport and is nontoxic. More importantly, ethanol is CO2 neutral since the amount of CO2 produced by steam reforming is consumed by the biomass growth, and this offers a nearly closed carbon loop and does not contribute to greenhouse gas emissions.

The reactions involved for producing hydrogen from ethanol include (i) steam reforming (ii) high temperature water-gas shift reaction (iii) low temperature water gas shift reaction and (iv) selective carbon monoxide oxidation. The overall reactions are as follows: 0 Steam reforming C 2 H 5 OH + 3H 2 O → 2CO 2 + 6 H 2 , ΔH 298 K = 174kJ / mol (1) Water-gas shift
CO + H 2 O ⇔ CO 2 + H 2 ,
0 ΔH 298 K = −41kJ / mol (2)

1 0 O 2 → CO 2 , ΔH 298 K = −283kJ / mol (3) 2 In the steam reforming reaction, in addition to H2 and CO2, significant amounts of CO and CH4 are also formed due to side reactions. For use in fuel cells, the CO content has to be reduced to less than 10 ppm. Water-gas shift reactors are therefore used to reduce the CO concentration and produce additional H2. Even after the low temperature shift reactor, the CO concentration is around 1% and is further reduced by selective oxidation. The major challenge is to develop highly active, selective and durable catalysts for the reactions involved.

Selective CO oxidation CO +

This paper reviews the latest catalyst developments for the steam reforming of ethanol, water-gas shift reaction and selective ( or preferential) oxidation of CO. Moreover, the possibility of using microreactors for producing hydrogen from ethanol is discussed.

2. Ethanol Steam Reforming
2.1 Reforming reactions Haryanto et al. (2005) have summarized the reaction pathways that can occur during ethanol steam reforming over metal catalysts. The important reactions include: C 2 H 5 OH → CH 3 CHO + H 2 (4) (5) C 2 H 5 OH → C 2 H 4 + H 2 O (6) CH 3 CHO → CH 4 + CO CH 3 CHO + H 2 O → 2CO + 3H 2 (7) CH 4 + H 2 O ⇔ CO + 3H 2 (8) CO + H 2 O ⇔ CO 2 + H 2 (9) 2CH 3 CHO → CH 3 COCH 3 + CO + H 2 (10) In addition, coke formation can occur by the Boudouard reaction and from ethylene (11) 2CO → CO 2 + C (12) C 2 H 4 → coke A thermodynamic analysis shows that an increase in temperature and high water-to ethanol ratios favour the formation of H2. Different metals can catalyze different reactions in the above reaction scheme and therefore selection of a proper catalyst is essential for obtaining high conversion and high H2 selectivity. 2.2 Noble metal catalysts The catalytic performance of supported noble metal catalysts (Rh, Ru, Pt, Pd) for steam reforming of ethanol has been investigated by Liguras et al. (2003) in the temperature range of 600-850oC. They studied the effect of the nature of the support (Al2O3, MgO, TiO2) and the metal loading ( 0-5%). For low loaded catalysts, Rh was found to be significantly more active and selective towards hydrogen. The catalytic performance of Rh and, particularly Ru, improved significantly at higher loadings, resulting in higher activity and higher hydrogen selectivity. At high loadings, the catalytic activity and selectivity of Ru catalysts was comparable to that of Rh. At 8000C and a water/ethanol

ratio of 3:1, the 5% Ru/Al2O3 catalyst was able to completely convert ethanol with a hydrogen selectivity above 95%. The nature of the support affects the performance of the catalyst, especially the coke formation.Acidic supports, such as γ - alumina favour ethanol dehydration resulting in the formation of ethylene, which is a coke precursor, eqn. (12). The dehydration can be reduced by using basic supports such as MgO. Frusteri et al. (2004a) investigated the performance of MgO-supported metal catalysts and reported the activity to be in the order of Rh> Co>Ni>Pd. The most selective catalyst was Ni/MgO whereas Rh supported on MgO was the most resistant to coke formation. Pd, Ni and Co were affected by metal sintering. A wide range of catalysts were tested by Aupretre et al. (2002) by changing both the active phase (Rh, Pt, Pd, Ru, Ni, Cu, Zn, Fe) and the oxide support (Al2O3, 12% CeO2Al2O3, CeO2, CeO2-ZrO2, ZrO2). At 7000C and atmospheric pressure, γ-Al2O3 supported Rh and Ni gave the best performance compared to Pt, Cu, Zn or Fe. For Rh catalysts, 1% Rh/ γ-Al2O3 showed the highest selectivity (88 %) while 1% Rh/CeO2ZrO2 exhibited the highest yield of hydrogen. Similar results were obtained for Ni catalysts. They reported that activity in the steam reforming reaction directly varies as degree of mobility of surface OH groups, and selectivity towards CO2 is controlled by the activity in the water-gas shift reaction. The ceria based supports were highly active for the water-gas shift reaction. Aupretre et al. ( 2005) studied SR of ethanol over Rh supported on MgxNi1-xAl2O3 spinel oxide.The spinel layer was introduced to control the acidic and basic properties of the catalyst, and thereby the formation of ethylene and acetaldehyde.Rh was the most active metal in the presence of nonacidic and moderately basic supports. Fierro et al. (2003) also reported high activity and selectivity to H2 on Rh/Al2O3 catalysts. In addition, the catalyst was highly stable. Breen et al.(2002) studied various oxide-supported metal catalysts for steam reforming of ethanol. They found that Al2O3-supported catalysts promote dehydration of ethanol to ethylene and the order of activity of metals for such catalysts is Rh>Pd>Ni = Pt. However, with CeO2/ZrO2 supported catalysts, ethylene was not formed. Kugai et al. (2006) studied the effect of nano-crystalline CeO2 supports on the performance of NiRh bi-metallic catalyst. They found that addition of Ni improved the dispersion of Rh /CeO2. These studies suggest that of all the noble metals, Rh catalysts supported on MgO or CeO2 are the most promising. Due to its relatively lower cost, Ru should also be investigated further. More work is also required on bi-metallic catalysts containing both noble and non-noble metals. 2.3 Non-noble metal catalysts The most commonly used non-noble metal for steam reforming of ethanol is nickel. Nickel based catalysts supported on Al2O3, MgO, La2O3, SiO2 and Y2O3 with additions of Cu, Cr, Zn, Na or K have been investigated for ethanol reforming reactions (Klouz et al., 2002; Comas et al., 2004; Fatsikostas et al., 2002). It is generally accepted that Ni promotes C-C bond scission whereas additives like Cr, Cu are the active agents for subsequent oxidation to produce CO and H2. Freni et al. (2003) found that Ni/MgO exhibited high activity and selectivity to H2 due to the lower tendency of Ni to oxidize during reaction. The addition of Li and K enhanced the catalyst stability of Ni/MgO catalysts mainly by depressing Ni sintering (Frusteri et al., 2004b). Fatsikostas and Verykios (2004) studied ethanol reforming over Ni catalysts supported on γ-Al2O3, La2O3 and La2O3/γAl2O3. The impregnation of Al2O3 with La2O3 reduced carbon deposition which was attributed to the formation of lanthanum oxycarbonate species. Biswas and Kunzru (2007) studied the effect of support and metal loading over Ni/CeO2-ZrO2 catalysts.

Among the catalysts examined, Ni/Ce0.74Zr0.26O2 with 30 wt% Ni loading exhibited high catalyst activity and hydrogen selectivity at 600oC. The effect of Al2O3, La2O3, and Y2O3 as support was examined by Sun et al. (2005).The catalyst activity and hydrogen selectivity were highest with La2O3 and lowest for Al2O3. Marino et al. (2004) tested Cu-Ni-K/γ-Al2O3 catalyst for ethanol steam reforming reaction. Copper-nickel catalysts on γ-Al2O3 and doped with potassium hydroxide, were suitable for hydrogen production at a relatively low temperature of 3000C. Cu was active agent for steam reforming, Ni favored the C-C bond rupture and potassium neutralized the acidic sites of the support. Youn et al. (2006) studied the effect of second metal (Ce, Co, Cu, Mg and Zn) addition on Ni/ γ-Al2O3 catalysts in the autothermal reforming of ethanol. Among the dopants tested, Cu was found to be most efficient promoter and it was active for WGS. In addition to that, Cu also served as a barrier to prevent the growth of Ni particles and decreased the interaction between Nispecies and γ-Al2O3 which facilitated the reduction of Ni-Cu/ γ-Al2O3 catalyst. A series of CuNiZnAl multi component mixed metal oxide catalysts with various Cu/Ni ratio was tested for OSR of bio-ethanol by Velu et al. (2005). Nickel significantly reduced the carbon products. Dehydrogenation of ethanol to acetaldehyde reaction was favored over Cu based catalyst whereas introduction of Ni favored the C-C bond rupture. The effect of different dopants (Cr, Fe, Zn or Cu) on Ni/Al2O3 catalysts for OSR of ethanol was investigated by Fierro et al. (2005). Nickel promoted the SR and WGS reactions while Al2O3 promoted the dehydration reaction. Moreover, Cu was more active for methane steam reforming compared to Cr, Zn and Fe. These studies show that of all the non-noble metal catalysts investigated, Ni (doped or undoped) supported on La2O3/Al2O3 or CeO2/ZrO2 is the most promising catalyst.

3. Water-gas Shift Reaction
In the steam reforming reaction, in addition to H2 and CO2, significant amounts of CO and CH4 are also formed due to side reactions. Water-gas shift reaction is therefore used to reduce the CO concentration and produce additional H2. This is a mildly exothermic, reversible reaction (ΔH298 = -41.2kJ/mol) and requires low temperature for high equilibrium conversion. Conventionally, WGS reaction for synthesis gas manufacture has been used industrially for the last several decades. To limit the reactor size and improve the equilibrium conversion, it is conducted in two stages. In the first or high temperature stage (HTS), ~90% of the CO is converted to H2 at 350-400oC on Fe2O3/Cr2O3 catalysts. This is followed by a low temperature stage (LTS) where 90% of the remaining CO is converted on CuO/ZnO operated at 200-300oC. Current WGS catalysts are not suitable for use in small scale portable power applications, mainly because of the high residence time requirement and also due to the pyrophoricity of the catalysts used (Panagiotopoulou and Kondarides, 2006). The development of microdevices offers the possibility of producing H2 from renewable feedstocks in compact devices. However, the significantly lower residence time requirement of microreactors warrants development of more active WGS catalysts. The application of integrated microstructured reactors/heat exchangers also allows adjustment of the temperature profile in a single WGS reactor, which can cover the whole range from HTS to LTS. Several catalysts have been tested for the combined HTS/LTS reaction. Most of these are based on noble metals such as Pt, Rh, Ru, Pd or Au. Wheeler et al. (2004) studied WGS over noble metals, with and without ceria, supported on alumina foam monoliths for contact times between 0.8 and 50 ms. The activity of the metals was in the order Ni > Ru > Rh > Pt >Pd. The maximum CO conversion with Ni was 80% and 45% with Pt. Addition of 5.0 wt% ceria, increased the rate of reaction over all the metals; the most

pronounced effect was observed on Pt. However, the activity order was nearly the same (Ni ≈ Ru >Pt >Rh > Pd).These metals also promoted the undesirable methanation reaction in the order Ru > Rh > Ni >Pt > Pd. The most promising catalyst in terms of selectivity, activity and stability was Pt/ ceria. Two mechanism have been proposed for WGS ,viz., adsorptive mechanism and redox mechanism (Kolb et al., 2005). Panagiotopoulou and Kondarides (2006) examined the effect of different supports on the catalytic performance of noble metal catalysts. For all metal support combinations, Pt was significantly more active than Ru, Rh or Pd. The catalytic activity of Pt and Ru catalysts was 1-2 orders of magnitude higher on reducible supports ( TiO2, CeO2, La2 O3 and YSZ) than on nonreducible supports ( Al2O3, SiO2 and MgO ).In the redox mechanism, the reducibility of the support has a direct effect on the activity whereas in the adsorptive mechanism, it can enhance the decomposition of the surface intermediates, that has been proposed as the rate-limiting step( Choi and Stenger,2003). Kolb et al.(2005) tested Pt/CeO2-Al2O3, Pt-Rh/CeO2-Al2O3; PtPd/CeO2-Al2O3 and Pt-Ru/Al2O3 catalyst both at HTS and LTS reaction conditions. Pt/CeO2-Al2O3 was identified as the most promising catalyst. The optimum platinum content was found to range between 3 and 5 wt.%, whereas the optimum ceria content ranged between 12 and 24 wt.%.Au/CeO2 was shown to be a very active and stable catalyst for WGS but only if the gold particles are nanosized. Larger particles are ineffective in catalyzing the reaction (Tabakova et al., 2004). Goerke et al.(2004) applied Au/CeO2 and Ru/ZrO2 on microstructured metal foils. At a residence time of