...• 1. INTEGRATED CASE STUDY (PAS 3183)MALAYSIA AIRLINES (MAS) PRESENTED BY Luluk Nor Khotima Bt Nursam Ashvenee Devi Selvaraju Noor Armi Addila Bt Noor Ariff Nur Azlinda Bt A.Azaman Norliza Bt P P Mohamed • 2. AGENDA• INTRODUCTION• MANAGEMENT CONSTRAINT• COMPETITION• UNPROFITABLE ROUTES• INCREASED IN FUEL PRICE• MAINTENANCE COST• RECOMMENDATION • 3. INTRODUCTION• 1994- Privatized 32% controlling stake to Tajuddin Ramli through Naluri Berhad• 1998- Asian Financial Crisis MAS faced substantial losses• 2005- MAS reported loss RM1.3b• 1 Dec 2005- Idris Jala became CEO of MAS• 27 Feb 2006 - BTP 1 was announced • Action taken by management(Government intervention (Constrained freely changing destination, routes and pricing (4. 1. MANAGEMENT CONSTRAINT • 5. Constrained Freely ChangingDestination, Routes And Pricing • MAS suffered high losses due to poor management & fuel price increases. • MAS operations were identified as the causes of the RM1.3 billion loss are: – Escalating fuel prices – Increased maintenance and repair costs – Staff costs – Low yield per available seat kilometre • 6. Government Intervention • Transformation Programme: - Widespread Asset Unbundling (WAU) RM7bil in debt were shifted to Penerbangan Malaysia Berhad (PMB) - Government Linked Corporation (GLC) BTP is also part of the GLC which aims to make all GLCs more successful. • 7. Action Taken By The Management • Increased domestic price • Major cost reductions were made •...
Words: 1114 - Pages: 5
...MAF 680 REPORT The problem faces by the Delima Enterprise Sdn. Bhd can be solve if the company implement some sort of internal control system in all activities. A system of internal control consists of policies and procedures designed to provide management with reasonable assurance that the company achieves its objectives and goals. Typically, there have three broad objectives in designing an effective internal control system, reliability of financial reporting, efficiency and effectiveness of operations and compliance with laws and regulations. Standard Operating Procedure (SOP) is one of the internal control systems that can be implemented by the company. A Standard Operating Procedure (SOP) is a set of written instructions that document a routine or repetitive activity followed by an organization. The development and use of SOPs are an integral part of a successful quality system as it provides individuals with the information to perform a job properly, and facilitates consistency in the quality and integrity of a product or end-result. The term “SOP” may not always be appropriate and terms such as protocols, instructions, worksheets, and laboratory operating procedures may also be used. SOPs will detail the regularly recurring work processes that are to be conducted or followed within an organization. They document the way the activities are to be performed in order to facilitate consistent conformance to technical and quality system requirements and to support data quality...
Words: 714 - Pages: 3
...Describe and different between Magnetic Ink Character Recognition (MICR) and Optical Character Recognition (OCR) : MICR and OCR are technologies increasingly being used in businesses these days. While OCR is Optical Character recognition. OCR is the recognition of printed or written text characters by a computer. It is the application software that allows a computer to recognize printed or written characters, e.g. letters, numbers, punctuation marks, and pictograms using an optical scanner for input. OCR is being used by libraries to digitize and preserve their holdings. MICR stands for Magnetic Ink Character recognition. It used primarily by the banking industry to facilitate the processing of cheques. The human readable characters are printed on documents using a magnetic ink. It stands for Magnetic Ink Character Recognition. Though these techniques have similarities and specific uses that differentiate between these two technologies. MICR MICR or My-ker as it is popularly known as is used in the banking industry in many countries of the world to ensure authenticity of a check or a demand draft using simple and inexpensive machines. The bottom line on these MICR checks is printed using a special magnetic ink. It is this ink that allows the information written on the check to be authenticated through machines. This facilitates processing of a huge number of checks in a single day which is otherwise very tedious. MICR typeface has only 14 characters in it including 0-9 and...
Words: 358 - Pages: 2
...Integrated Case 1 Strategy Webster University September 7, 2014 Papa Joe and the board of directors should proceed, as far as strategic planning for their organization, by attaining visibility on the best strategic five to ten year long term courses of action for the Great Italian Food Company. Maria’s course of action in expanding the business to other major cities in the Midwestern United States should be thought about by the board of directors as a highly desirable course of action that aligns with the company’s expansion strategy while staying concentrated with the Italian restaurant food industry business model. Additionally, Maria’s experience in strategic management will enhance the company’s ability to involve “managers from all parts of the organization in the formulation and implementation of strategic goals and strategies” (Brasfield, 2014, p. 138). Maria’s emphasis on the strategic planning process to systematically determine their future will make her suggestions well based while maintaining a concentrated strategy. Furthermore, solidifying gains and successes of the company in St. Louis could be incorporated into Papa Joe’s vision of having a celebrity endorse the business in the St. Louis area which will strengthen the Midwest expansion lines of effort. Offering the company’s signature frozen foods at their area restaurants would function to expand awareness and enhance the marketability...
Words: 664 - Pages: 3
...Question 3 ------------------------------------------------- Could the Audit be completed soon without any qualification? From the financial perspective, discuss and recommend objectively the most appropriate solution for Delima Enterprise Sdn Bhd (DESB) financial management and operations. There are two possible answers to this question and the first is being “No, the audit could not be completed without any qualification.” However, the audit can be completed but with a qualified audit report. The few reasons behind the qualification of the audit report are as follows: 1. The sum of RM250,000 account receivables was wrongly entered into another account in the General Ledger. To make matters worse, several pages of account receivable listing were missing causing it even more difficult for the auditors to track the transaction movement. 2. There is a breach of accounting standards FRS119- Employee Benefits as EPF was not contributed by the employer or deducted from the employees. With this, there was a breach as EPF (Employees Provident Fund) falls under FRS119 which states that, post-employment benefits such as pensions, other retirement benefits, post-employment life insurance and post-employment medical care. Generally, a qualified audit report is issued when the auditor encountered one of two types of situations which do not comply with generally accepted accounting principles (GAAP), however the rest of the financial statements are fairly presented. A qualified...
Words: 1055 - Pages: 5
...Integrated Case Study: Bandon Group Inc. John Wilson Dr. Ashley Johnson 7/31/13 The Bandon Group was founded in 1953, and is still a family own company that is a distributor of copiers, electronic printers, faxes and other equipment for mid market companies. The company’s has effectively competed with IBM and Xerox by offering mid tier equipment at competitive prices. Bandon Inc. has four divisions located in the western parts of the United States in states such as Salt Lake City, Arizona, Denver and Portland, where their corporate head quarters is located in Arizona (Sumner, 2005). Over time the Bandon Company’s sales became successful which allowed growth. Since splitting into four divisions, each division has tried different attempts to determine how a new Information Technology can improve the overall needs of the company. Each division attempted many different ways to implement its own Information Technology systems that the whole company could benefit from. The attempts were unsuccessful and caused errors with duplication, migration, data migration, technical support and training for four sales prospects and CRM solutions. Because of this it put the company at a disadvantage not allowing them to compete with the competition (Sumner, 2005). Step 1: Purpose and Scope of Study The purpose and scope of the Bandon Group Inc. case study is to identify a way that...
Words: 1358 - Pages: 6
...|MKTG 3596 - Integrated Marketing Communications |Instructor: Charles F. Byers | |Lec. #94665 |Office: Lucas Hall 216W | |Santa Clara University |Phone: 408-310-9244 | |MBA Winter 2014 |E-mail: cbyers@scu.edu & byers.charles@ yahoo.com | |Meeting Times: Sat. – 8:30 – 11:15 p.m. |Office Hours: Sat. 11:15 a.m. – 12:15 p.m. or by appointment | |Meeting Place: Lucas Hall 307 | | Integrated Marketing Communications Textbooks & Materials Byers & Barr, “Integrated Marketing Communications Custom Edition for Santa Clara University 3E”: Pearson Learning Solutions, 2014. CoursePack Reader – “Marketing 596 – Winter 2014” Course Description This course is designed as an introduction to the concept and practice of integrated marketing communications (IMC). It takes the participant through communication, marketing, branding, and integrated marketing theory, planning and IMC program coordination. The course also addresses the marketing communications tactics of advertising, public relations, direct...
Words: 1067 - Pages: 5
...Case Study Early Supplier Integration in the Design of the Skid-Steer Loader 1. Suppose there are 100 potential suppliers. How many suppliers do you think should ideally be integrated in the early skid-steer development process? Why that many or that few? The case for early integration of suppliers in the new product development process is compelling, but it is important to recognize that supplier integration is a process that must be managed properly in order to achieve maximum impact. Primary candidates for supplier integration should be based in terms of their impact on product performance, their technical complexity, their impact on product development time, and their impact on product cost. It not necessary that if 100 suppliers are required to be integrated, all the suppliers will be ready to become the part of the early development process. If company is thinking for long term integration then the supplier's future capabilities may be as important as their current capabilities. Supplier involvement in a product development effort can sometimes be uncomfortable and therefore without commitment in both organizations, the communication and sharing of information and resources necessary to make the relationship work will probably not occur. The number of potential supplier’s involvement in this situation will depend on all these factors and hence cannot be assigned a number. It can be 100 or it can be 0 2. Are there tradeoffs in terms of the number of suppliers to integrate...
Words: 323 - Pages: 2
...read online. So if you need to download Pinnacle manufacturing solution manual pdf gxukzaf then you've come to the right website. We have Pinnacle manufacturing solution manual epub, pdf and kindle formats. We will be happy if you come back to us again. Auditing pinnacle case answers - free eBooks Auditing pinnacle case answers download on Caa2011-2.org free books and manuals search Banbury Impex Case Study http://www.caa2011-2.org/auditing-pinnacle-case-answers/ Pinnacle manufacturing auditing case solution Pinnacle manufacturing auditing case solution download on iubmb-2013-3.org free books and manuals search - CHAPTER 8 8 40 PINNACLE MANUFACTURING SOLUTION http://www.iubmb-2013-3.org/pinnacle-manufacturing-auditing-case-solution/ Pinnacle manufacturing case solution - free Pinnacle manufacturing case solution download on iubmb-2013-3.org free books and manuals search - TIVO HARVARD CASE SOLUTION http://www.iubmb-2013-3.org/pinnacle-manufacturing-case-solution/ Auditing Class Case Study Pinnacle Manufacturing Latest Auditing Class Case Study Pinnacle Manufacturing Solutions Chapter 16 into habitats baystat240 owner manual bendix ws 20 california tax http://www.platformusers.net/rt/auditing-class-case-study-pinnacle-manufacturing-solutions-chapter-16/ Solution For Pinnacle...
Words: 940 - Pages: 4
...MBA 525 - Module 3: Case Study Analysis Case Study: “The Third Battle of Bull Run: The Disney’s America Theme Park (B)” Purpose: The purpose of this assignment is to read a case study and identify the most significant business problem the company faced while assessing the various types of organizational communications used to manage the problem. Assignment: Your task is to read the case study, and after careful analysis, formulate a succinct response that is no longer than two double-spaced typed pages. You must also include a title page and separate reference page. Your response must include a clear identification of the most significant business problem facing Disney, prompting the public statement. Remember this is your educated opinion which must be supported with evidence. You may find the evidence needed in the case study, but you may also use credible external sources. In addition, your response must assess the various types of organizational communication Disney used to manage the problem. Examine the different audiences/constituencies and determine how the message differed or would have differed. It is important that your paper has the three sections— introduction with a thesis, body with support for the thesis, and a conclusion. Statement on graduate-level writing requirements Your writing reflects your ideas and communicates your understanding of the topic to the instructor. This assignment will be graded on the composition elements listed below...
Words: 403 - Pages: 2
...International Journal of Trade, Economics and Finance, Vol. 1, No. 1, June, 2010 2010-023X Information Technology roles in Accounting Tasks – A Multiple-case Study Maria do Céu Gaspar Alves Abstract—Nowadays the business world is changing at a faster and faster pace. The reasons given for this is globalization, highs information technology (IT) investments and the rapid pace of technological change. Organizations are responding in different ways and at different rates to the wide range of IT based opportunities and pressures. The purpose of this paper is to focus on the effects of IT related organizational changes on the management accounting function and to contribute to the body of knowledge about to what extent IT affects the ability to solve accounting tasks. The relationship between IT and accounting practices was investigated qualitatively using six case studies and we will measure the impact of IT on accountants’ tasks. The findings suggest a tendency for change and the decentralization of accounting tasks. Index Terms—Accounting, Accounting Information Systems, Financial Documents, Information Technology, Management Information System. I. INTRODUCTION Nowadays the business world is changing at a faster and faster pace. The reasons given for this is globalization, highs IT investments and the rapid pace of technological change in combination with escalating costs of research and development (Frishamar, 2002). The role of information technology...
Words: 4110 - Pages: 17
...is a limited authoritative set of critical success factors (CSFs) for management reference because the BI market has been driven mainly by the IT industry and vendors. This research seeks to bridge the gap that exists between academia and practitioners by investigating the CSFs influencing BI systems success. The study followed a two-stage qualitative approach. Firstly, the authors utilised the Delphi method to conduct three rounds of studies. The study develops a CSFs framework crucial for BI systems implementation. Next, the framework and the associated CSFs are delineated through a series of case studies. The empirical findings substantiate the construct and applicability of the framework. More significantly, the research further reveals that those organisations which address the CSFs from a business orientation approach will be more likely to achieve better results. Keywords: Business intelligence system, Critical success factors, Delphi method, Case study INTRODUCTION Recently Business Intelligence (BI) applications have been dominating the technology priority list of many CIOs [11, 12]. According to Reinschmidt and Francoise [22], a BI system is “an integrated set of tools, technologies and programmed products that are used to collect, integrate, analyse and make data available”. Stated simply, the main tasks of a BI system include “intelligent exploration, integration, aggregation and a multidimensional analysis of data originating from various information resources” [21]...
Words: 8100 - Pages: 33
...Curriculum Map EED 420 Week 2 Assignment Case Study Linda EED 420 Week 2 DQs EED 420 Week 3 Curriculum Map EED 420 Week 3 Assignment Case Study Erien EED 420 Week 3 DQs EED 420 Week 3 Individual Assignment Inquiry-Based Science Lesson EED 420 Week 4 DQs EED 420 Week 4 Assignment Concept Mapping of Tom EED 420 Week 4 Curriculum Map EED 420 Week 5 DQs EED 420 Week 5 Science Lesson Observation Paper EED 420 Week 5 Assignment Integrated Lesson Plan EED 420 Week 5 Assignment One School Year Science Pacing Guide ------------------------------------------------------------ EED 420 Week 1 DQs (UOP) For more course tutorials visit www.tutorialrank.com EED 420 Week 1 DQs --------------------------------------------------------------- EED 420 Week 1 Social and Cultural Influences (UOP) For more course tutorials visit www.tutorialrank.com Description Reviews (1) Week 1 Individual Assignment Social and Cultural Influences Resource: University of Phoenix Material: Appendix A Review the three assignment options provided in Appendix A. Select and complete one of the options. Include the Certificate of Originality with your submission ---------------------------------------------------------- EED 420 Week 2 Assignment Case Study Linda (UOP) For more course tutorials visit www.tutorialrank.com Resource: Annenberg website video case study for Linda found on the student website and University of Phoenix Material: Case Study Linda Click on the View Programs link...
Words: 498 - Pages: 2
...Students are to individually complete a 3,000-word report entitled, ‘The Importance of Marketing to Organisations in the Twenty-First Century’. The report should: 1. Provide a case study of one organization which will provide the focus of the report, i.e. show via any one organization what marketing is, how this organization uses marketing strategies and techniques, why marketing is essential to this organization and how its use of marketing has changed and will change in the future. Theoretical models should be applied throughout. The case study should be integrated throughout the report with an analysis of the marketing process. 2. Be written, organized and laid out in an appropriate business report-like structure and format. (This will be discussed in lectures and seminars) 3. Contain recent material from the reading list and other relevant sources (including the media). 4. Use marketing models and examples throughout. 5. Contain a history and definition of modern marketing. 6. Explain the functions of marketing. 7. Describe the marketing process with particular emphasis on the development of integrated marketing strategies by organizations. 8. State why marketing is fundamental to the successful operations of an organization. 9. Outline recent changes in marketing and expected developments and challenges in the coming century. Developments in both technology and society are fundamental here. · Provide a personal statement (from each member of the group) outlining...
Words: 416 - Pages: 2
...CASE STUDY Chapter SIX CASE 6-1 Case Study on “Transfer Pricing Problems” Case SUMMARY Division A of Lambda Company manufactures product X, which is sold to Division B as a component of product Y. Product Y is sold to Division C, which uses it as a component of Product Z. Product Z is also sold to customers outside of the Company. The intracompany pricing rule is that product are transferred between divisions as standard cost plus 10 percent return on inventories and fixed assets. Case Questions Question a: with transfer price calculated in Problem 1, is Division C better advised to maintain its price at $28 or follow competition in each of the instances above? Answer: Under possible competitive price $27.00 If company maintain the price at $28, the profit=(28-23.6) ×9,000=39,600 If company follow the possible competitive price at $27, the profit= (27-23.6) ×10,000=34,000 Under possible competitive price $26.00 If company maintain the price at $28, the profit=(28-23.6) ×7,000=30,800 If company follow the possible competitive price at $26, the profit= (26-23.6) ×10,000=24,000 Under possible competitive price $25.00 If company maintain the price at $28, the profit=(28-23.6) ×5,000=22,000 If company follow the possible competitive price at $25, the profit= (25-23.6) ×10,000=14,000 Under possible competitive...
Words: 1977 - Pages: 8
