...and Materials Science Laboratory report writing instructions DEN101 - Fluid Mechanics 1 Flow Rate Measurement Experiment A. Student Student Number: 1234567 Version 2.0, 27 November 2010 Template for Word 97-2003 Abstract This document explains what is expected in your Fluids 1 lab report. The sections that should be covered are outlined and a structure you could follow is proposed. Detailed advice on how to edit the report is given. The document concludes with the marking criteria for this lab report. Table of Contents Abstract 2 1. Introduction 3 1.1. Writing 3 1.2. Editing and formatting 3 1.3. Content of the introduction 4 2. Background and theory 4 3. Apparatus 4 4. Test 4 5. Experimental procedure 4 6. Results 5 7. Discussion 5 8. Conclusions 5 9. References 5 10. Appendix A: Marking criteria 6 Introduction Before starting to write a report, you should think about what is your audience. Am I writing for colleagues who want a lot of detail how it is done, or am I writing for my boss who just wants an executive summary as he has no time for details? In general, there is not a single type of audience and we have to make our writing suitable for the detailed read, as well as the fast perusal. To understand what is required from you in this report, please have a look at the marking criteria in the Appendix. 1 Writing To limit your time that you have to put...
Words: 2017 - Pages: 9
...American Intercontinental University Biology Lab Professor Individual Project: Unit 1 The Scientific Method Name: Sarah Ehrlich Date: March 30, 2014 Instructor’s Name: Robert Carter Assignment: SCIE207 Phase 1 Lab Report Title: Using Scientific Method Table 1: Maize Yield from Arable Soil |Amount of Mineral Nitrogen Fertilization (kg per 100 |Yield of Maize (mg of dry mass per 100 acres per year) in | |acres) |Arable Soil | |8 |15.6 | |10.7 |17.0 | |13 |18.2 | |15.2 |19.3 | |16.4 |20 | |18.2 |20.9 | |19.2 |21.2 | |20.8 ...
Words: 335 - Pages: 2
...Lab #1 “Who has the same solid that I have?” Abstract Different Physical and chemical tests were performed on 10 numbered unknown solids and the results of all tests were compared as a class to try and determine which groups had the same unknown solids based on similarities in properties. It was found that my given unknown solid #11 shared similar properties with the unknown solid #1. A side by side analysis of the reactivity test in which Hydrochloric acid (HCI), lead nitrate (Pb(NO3)2) and sodium hydroxide (NaOH) was added to three separate samples of the compounds unknown #1 and #11 aqueous solutions. The results for both unknowns were identical, leading to the conclusion that my unknown solid #11 was the same unknown solid as #1. Introduction When conducting research it is important to be comfortable communicating your results with other researchers so that they can be further analyzed and compared with the results of other research experiments. Another large part of conducting research is to be comfortable determining, describing and comparing chemical and physical properties of compounds. Many compounds can look very similar, but have drastically different chemical properties, so it is important to know which tests can be performed on a compound to help determine what it is, or what it is not. In this experiment 2 sets of six unknown solid compounds were put into small jars and labeled with the numbers 1-12, numbers 4, 6 and 8 were not used. Each lab group was given...
Words: 1098 - Pages: 5
...to find out the pH range of the indicator you use. Color pH indicators only provide an approximate measure of the pH, or the strength of the acid or base(swc2.hccs.edu). They are not as accurate as the instruments the scientists use to measure pH, but they acceptable for the experiments below. What is the pH of various solutions? There were two experiments conducted: The Pre-Lab Exercise and Procedure B. Pre-Lab Exercise In this experiment, two different approaches were used to measure the pH for a variety of substances. One was the pH paper and the other was the electronic pH meter. | pH measured with pH paper | pH measured with pH meter | calculate the following values using the pH values obtained with pH meter | Solution | | | pOH | [H3O+] | [OH−] | soap solution | 8 | 7 | 7.00 | 1.00E-07 | 1.00E-07 | Coffee | 4 | 4.69 | 9.31 | 2.04E-05 | 4.90E-10 | lemon juice | 2 | 2.35 | 11.65 | 4.47E-03 | 2.24E-12 | Vinegar | 2 | 2.31 | 11.69 | 4.90E-03 | 2.04E-12 | sea water | 7 | 5.57 | 8.43 | 2.69E-06 | 3.72E-09 | aquarium water | 7 | 6.53 | 7.47 | 2.95E-07 | 3.39E-08 | Figure. 1. Shows the measurement of the pH of the variety of solutions and the calculation of the hydronium ion concentration, the hydroxide ion concentration, and the pOH of each solution. To do this, a simply drop of...
Words: 755 - Pages: 4
...easy machining tough. The question seeking for an answer of the investigation is “Can buying brass ingot and roll it flat to get a 60 percent reduction in thickness and hardness of 45 without it cracking?” For this experiment, there was two test that was conducted, Cold Working test and the Heat Treatment Test, on a sample of 260 Brass in ingot form. For the Cold Working Test, the first done was putting the sample through a Stanat Rolling Mill to reduce the thickness of the ingot. Part two of the Cold Working Test was to use the Rockwell Hardness Tester to measure the hardness of Brass. Do this test ten times at increments of -0.75 from 10.5mm to 3mm. At each targeted thickness, measure the width and length. The result of the test is on Table 1. After doing the Cold working Test, Heat treatment test is done. For this test, take the 3mm brass plate and cut it into 5 equal pieces and place each piece into the5 furnaces at 100°C, 260°C, 350°C, 450°C, and 565°C. Test the Hardness of each piece on the Rockwell Hardness Tester and the results are on Table 2. After conducting this experiment, the answer to “Can...
Words: 1903 - Pages: 8
...lacking either one of them, our body would receive the consequences. Carbohydrates are one of the most essential sources of energy for our body. They a composed of the three elements, carbon (C), hydrogen (H) oxygen (O), and in the ratio of 1:2:1. With the general formula Cn(H2O)n. There are three common groups under carbohydrates, which are monosaccharide (simple sugar), oligosaccharides and polysaccharides. All of these groups possess different carbon structural and function between one another. There are many types of experiments that can be conducted to identify and differentiate the group from each other. Thus, the alb activity can surely help to further understanding between the relationship of the groups’ structure and their function. Materials: benedict reagent 10 cm3 measuring cylinder iodine solution 9 boiling tubes distilled water 2 test tubes potato tube holder flour water bath 0.01% glucose solution 1 molar Hydrochloric acid HCI 0.1% glucose solution Sodium Hydrogen Carbonate NaHCO3 1% glucose solution Light microscope w juice Microscope slide and coverslip y juice Razor blade z juice White tile mortar and pestle Spatula Methods: - The instructions and the lab safety procedures were being followed carefully. - The waste materials were ensured to be safely disposed in a proper ways. - Observation and results of the experiments were...
Words: 2839 - Pages: 12
...University of West Florida Department of Physics PHY 2053L University Physics I Lab Section: 81419 Lab Report Number: 1 Lab Title: Meaning of Measurement Name: Group Members: Date: 8/27/2014 PURPOSE: Learn the basics of measurement and statistical analysis in context of volume and density. EQUIPMENT: Three different geometric solids: 1 identified as white cylinder, 1 identified as brass-colored cylinder, 1 identified as silver-colored sphere. Meter stick (wooden, displaying measurements in cm) Analog scale (zero-ed prior to experiment) Manual caliper Digital caliper (zero-ed prior to each measurement) PRINCIPLE: This lab is intended to reinforce the importance of using proper techniques to attain precise measurements. It further demonstrates that reliability of results from different measuring devices. In this experiment, the most rudimentary measuring tool was the meter stick followed by the manual caliper and then the digital caliper. Measuring each object five times should reinforce the different interpretations of team members as well as the variance between the different tools used to measure the objects. In addition to measuring the length, width and height of each object, the mass was attained through the use of an analog scale. While a digital scale would have shown a more precise measurement, the analog scale was a more appropriate tool with the meter stick and manual caliper as the significant figures produced by each ...
Words: 2123 - Pages: 9
...Lab #1 – Report file Identifying Threats and Vulnerabilities in an IT Infrastructure Course Name and Number: Risk Management IS355 Student Name: Sherry Best Instructor Name: Nicole Goodyear Lab Due Date: 1/16/2018 In your Lab Report file, describe how risk can impact each of the seven domains of a typical IT infrastructure: User, Workstation, Local Area Network (LAN), Local Area Network to Wide Area Network (LAN-to-WAN), Wide Area Network (WAN), Remote Access, and System/Application domains. Risk is the likelihood that a loss will occur. A loss results in a compromise to business functions or assets. • User Domain can come in various forms; people are the weak link here such as a user writing a password on a sticky note and sticking under the keyboard or on the monitor. Unknown to the user a malicious individual can log unto the network or domain using that person's credential to steal or launch a DoS or a DDoS attack. This can overwhelm the entire network that can lead to loss of revenue for the organization....
Words: 695 - Pages: 3
...Name: | | | Date: | | | Grade: | | Instructions: * Complete Part 1, then Part 2 sections of the Lab 1.1. Then, complete this Lab Report by filling in all details. Use information you gained during your experimentation to complete the answers. * Be sure to submit your lab report before the deadline. ------------------------------------------------- Part 1- Binary-to-Decimal Number Conversion Theory: 1. Enter the decimal, hexadecimal, and BCD numbers for each of the following binary numbers. Binary | Hexadecimal | BCD | Decimal | 0000 | 0 | 0000 | 0 | 0001 | 1 | 0001 | 1 | 0010 | 2 | 0010 | 2 | 0011 | 3 | 0011 | 3 | 0100 | 4 | 0100 | 4 | 0101 | 5 | 0101 | 5 | 0110 | 6 | 0110 | 6 | 0111 | 7 | 0111 | 7 | 1000 | 8 | 1000 | 8 | 1001 | 9 | 1001 | 9 | 1010 | A | Invalid | 10 | 1011 | B | Invalid | 11 | 1100 | C | Invalid | 12 | 1101 | D | Invalid | 13 | 1110 | E | Invalid | 14 | 1111 | F | Invalid | 15 | 2. Explain major differences between binary and BCD numeric representations. Ans 2: BCD each digit of a decimal number is coded as a 4 bit binary number between 0 and 9. This is not used too often as it is difficult to do calculations in BCD as opposed to binary, and it is not efficient – uses more bits than a binary coded number would. In Binary the number is converted to base 2, binary code. Planning: 1. Provide a list of places that you can obtain the datasheets for the following components: ...
Words: 1024 - Pages: 5
...1) As an individual, what did you contribute/accomplish in lab this week? 2) What did you learn (individually and as a team)? 3) How can you or your team improve in the future? 4) As a team, what do you need to accomplish in lab next week? 1) In lab this week, after multiple attempts to evaluate and redesign the cranking system for the dollar bill side of our project, we (my lab partner and I) decided to use six dowels to fabricate the conveyor belt. We went over many designs, mostly facing the same problem: no supporting unit for the system. We eventually came up with a design that attained our need and started fabricating in lab. However, since we should have figured this out earlier, we had to work on fabricating out of labs so that we could catch up with the progress. 2)...
Words: 440 - Pages: 2
...Figure 10 shows both frequencies superimposed together. It is observed that when one frequency is low, the other remains high. In other words, only one tone is generated at any point in time. With these simulations, it can be inferred that the Ltspice results were as expected. Since these results align to what is known in theory, it is considered to be accurate. The prototype is only then built and tested with an oscilloscope. The results is recorded and shown in the figures below. 4.2 Oscilloscope Readings Figure 11: Oscilloscope Waveform for A1 Figure 11 shows the square wave produced from A1. The frequency obtained was 1.14Hz. Figure 12: Oscilloscope Waveform for A2 Figure 12 above shows A2 producing a frequency of 440.51Hz. Figure 13: Oscilloscope Waveform for A3 Figure 11 shows A3 producing a frequency of 1.4439kHz. Figure 14: Oscilloscope Waveform for both frequencies The results obtained from the oscilloscope measurements were relatively accurate. This can be seen by the two distinct waveforms occurring at separate times. Since these measurements tally with the Ltspice simulations, it clearly shows that the prototype is fully functional. The slight difference in the frequency values could have been attributed from several factors. Simulations produce frequency values under perfect conditions. On the other hand, the practical approach is faced with imperfections such as noise, internal resistance from components and experimental inaccuracies...
Words: 573 - Pages: 3
...TASK 1 Comparing light and electron microscope Note:- A microscope is an instrument used for viewing a tiny object that cannot be seen with our naked eyes. The microscope is an important instrument found in the laboratory. We have two types of microscope. Light Microscope and Electron Microscope. The light Microscope is one which can be illuminated by light while an electron microscope is one which can be illuminated by electron. Electron microscope is expensive and not portable compared to the light microscope. The Electron microscope is then of two types. We have the Scanning Electron microscope and the Transmission Electron microscope. Features Light Microscope Electron Microscope Comments Cell Components Seen Animal Cell:- Nucleus, Nucleolus...
Words: 3613 - Pages: 15
...Questions: (1 pt each response, 7 pts total) 3. What does your data indicate about the rate of cell division in cancerous tissue compared to the rate of cell division in normal tissue? What data did you use to answer this question? Answer: By comparing table 3 (normal cell tissue table) and table 4 (cancerous cell tissue table) I found that cancerous cell tissue has much faster rate of cell division. Specifically, I looked at the mitotic indexes on both tables and found that cancerous cell tissue actively divides at a much faster rate than normal cell tissue. 4. Which type of cancer is the fastest growing? Explain your answer, using your relevant data. Answer: By looking at the mitotic index side of table 4 (cancerous cell tissue table) I found that ovarian cancer has the fastest growth rate. 5. With what you have observed in this lab, if you were to compare tissue sample from normal breast tissue and cancerous breast tissue: a. Would you expect to see a difference in the rate of cell division...
Words: 842 - Pages: 4
...What safety procedures must you follow during this lab period? During this lab period, the safety procedure that should be followed are safety glasses, lab coat gloves and proper tools for dissection. Use a text book or online references to define the following word modifiers. Proto= “first” Deutero=second Stome= “organism having a mouth or mouthlike organ” Nephro= “relating to kidneys” How might you benefit from remembering the definitions of word parts? I might benefit from remembering the definitions of word parts because if I cannot remember the definition of the whole word the prefix or suffix can at least give me an idea of what it is. What diagnostic features are present in mollusks and annelids were not present in the phyla studied in the previous lab exercises? What...
Words: 568 - Pages: 3
...In order to receive full credit each of your lab reports MUST include a purpose, summary, detailed answers to the lab questions which demonstrate your understanding of the concepts as well as a conclusion that summarize the lab and specifically addresses the lab’s learning objectives and relate them back to the data or observations collected in the lab. Purpose: Briefly state the learning objective of the assigned lab in two sentences. This assignment is for us to understand how to convert basic measurements. It is important to know how other parts of the world calculate temperature and other measurements so that we are on the same page and are able to communicate with each other. Summary: Detail and explain what was observed during the lab activity; this answer should be approximately one paragraph in length....
Words: 694 - Pages: 3
