Free Essay

Nt1110 Unit 4 Study Guide

In: Other Topics

Submitted By Adsandl91
Words 418
Pages 2
Chapter 4 Motherboards and Buses
1. What types of ports and slots are found on a motherboard? CPU,s Graphic slots , ram slots

2. List the signals carried by the system bus. Data, power, control, and address

3. How are memory locations identified and accessed? By an address scheme, and numbering the bits

4. What is another name for the MCH? What is its function? The Northbridge, its where the RAM goes

5. What is another name for the ICH? What is its function? The Southbridge, its where the input and output slots go.

6. List the 4 most common motherboard form factors. ATX, Micro ATX, BTX, and NLX

7. When was the ATX introduced? What was its predecessor?
1990’s, and AT, BabyAT

8. What was a major problem with the ATX design? How was this corrected? The cooling System, by doing the BTX design

9. Which of the ATX and BTX layouts are the smallest? picoBTX and the FlexATX

10. What is an integrated I/O port form included on all motherboards? Rear port clusters

11. How many memory slots do modern motherboards have? How many memory modules are required to boot a PC?
2 or more slots, and 1 memory module

12. List the most common expansion slots types on modern computers. PCI, PCIe, and AGP

13. What is the speed and bit size of the PCI bus? 33Mhz 32 bit

14. Which port type was developed for 3D graphics? The AGP

15. Which expansion slot types were replaced by PCIe? PCI and AGP slots

16. Explain the speed-per-lane of PCIe and compare the different versions. V1.0=250Mbps, V2.0=500Mbps, V3.0=1Gbps

17. List the major mass storage interface types. EIDE/PATA, SATA, and SCSI

18. Which mass storage interface can control up to 2 devices? EIDE/PATA

19. Which mass storage interface can only control up to 1 device? SATA

20. Which mass storage interface is as fast as SATA and can handle devices other than hard drives? SCSI

21. What are the common display adapter slot types on modern PCs? PCI’s, PCIe, and AGP

22. State 2 ways that adapter card problems could be detected. Non-functioning device or device manager indicator

23. How does device manager indicate a non-functioning device versus a disabled device? Shows a small triangle with a “!” in the middle

24. What software makes a device communicate with the PC OS? Software driver

25. List the two forms of device drivers? Files, and Firmware

Similar Documents

Free Essay

Nt1110 Unit 6 Student Study Guide

...NT1110 Unit 6 Student Study Guide 1. What are the two types of memory found in your computer? RAM & ROM 2. Discuss the features of RAM. RAM can be changed at any time and loses its data when power is turned off 3. What is an important characteristic of DRAM? DRAM is Dynamic 4. What type of RAM does not require refreshing? SDRAM DRAM 5. Discuss the main feature of DDR and DDR2. DDR – Double Data Rate DDR2 – Double Data Rate Enhanced 6. What is a RDRAM module? Discuss its application. A dynamic variant of the RAM 7. Compare and identify memory modules. 168 pin DIMM 100 pin DIMM 172 Pin Micro DIMM or DDR 8. Which type is used in laptops? 144-pin SODIMM 9. Discuss the geometry of hard drives. The Geometry of hard drive is organization of data on Platters 10. How many drives can be attached to one PATA cable? 2 Drives 11. How are they identified? IDE or SATA 12. Define UDMA. The UDMA interface was the fastest method used to transfer data between the computer and  ATA devices until serial ATA.   13. Discuss the major features of ATA drives. ATA drives are the standard interface that connect hard disks and optical units to a computer. 14. What information is provided by the PATA BIOS? LBA Translation, Hard drive geometry and Data transfer rate 15. List the three geometry factors. Number of cylinders, write/ read heads and......

Words: 287 - Pages: 2

Premium Essay

Nt 1210

...Contact/Instructional hours: 56 (34 Theory Hours, 22 Lab Hours) Prerequisite(s) and/or Corequisite(s): Prerequisites: NT1110 Computer Structure and Logic or equivalent Course Description: This course serves as a foundation for the study of computer networking technologies. Concepts in data communications, such as signaling, coding and decoding, multiplexing, circuit switching and packet switching, OSI and TCP/IP models, LAN/WAN protocols, network devices and their functions, topologies and capabilities are discussed. Industry standards and the development of networking technologies are surveyed in conjunction with a basic awareness of software and hardware components used in typical networking and internetworking environments Introduction to Networking Syllabus Where Does This Course Belong? This course is required for the associate program in Network System Administration and the associate program in Electrical Engineering Technology. The following diagrams demonstrate how this course fits in each program. Associate Program in Network Systems Administration NT2799 NSA Capstone Project NT2580 Introduction to Information Security NT2670 Email and Web Services NT2640 IP Networking PT2520 Database Concepts NT1330 Client-Server Networking II NT1230 Client-Server Networking I NT1430 Linux Networking PT1420 Introduction to Programming NT1110 Computer Structure and Logic NT1210 Introduction to Networking NT1310 Physical......

Words: 4400 - Pages: 18

Premium Essay

Nt1210 Introduction to Networking Onsite Course

...Contact/Instructional hours: 56 (34 Theory Hours, 22 Lab Hours) Prerequisite(s) and/or Corequisite(s): Prerequisites: NT1110 Computer Structure and Logic or equivalent Course Description: This course serves as a foundation for the study of computer networking technologies. Concepts in data communications, such as signaling, coding and decoding, multiplexing, circuit switching and packet switching, OSI and TCP/IP models, LAN/WAN protocols, network devices and their functions, topologies and capabilities are discussed. Industry standards and the development of networking technologies are surveyed in conjunction with a basic awareness of software and hardware components used in typical networking and internetworking environments Introduction to Networking Syllabus Where Does This Course Belong? This course is required for the associate program in Network System Administration and the associate program in Electrical Engineering Technology. The following diagrams demonstrate how this course fits in each program. Associate Program in Network Systems Administration NT2799 NSA Capstone Project NT2580 Introduction to Information Security NT2670 Email and Web Services NT2640 IP Networking PT2520 Database Concepts NT1330 Client-Server Networking II NT1230 Client-Server Networking I NT1430 Linux Networking PT1420 Introduction to Programming NT1110 Computer Structure and Logic NT1210 Introduction to Networking NT1310 Physical......

Words: 4400 - Pages: 18

Free Essay

Itt Tech

...Uyiosa Ehioghae R-N-M NT1110 Unit 3 Student Study Guide 1. What port type has replaced mini-DIN, COM, LPT, and other port types? USB 2. State the speeds of USB 1.1, 2.0. and 3.0. 12 Mbps; 480 Mbps; 4,800 Mbps. 3. What is the standard IRQ range? Which IRQ is for the keyboard? 0-15. 60-6F. 4. List the maximum cable length for USB 1.1, 2.0, and 3.0. Five meters for 1.1 and 2.0. Three meters for 3.0. 5. How many devices does a USB hub appear as in the Windows device manager? Two devices. A USB root hub, and a PCI-to-USB universal host controller. 6. How can USB ports be added to a computer? Motherboard connectors for USB header cables, hubs, and Add-on cards. 7. Name the two generic hub types. Bus powered and self powered. 8. Which port is as versatile as a parallel port? 1284-B port. 9. What are the two serial port forms? IEEE 1394 (Firewire400), IEEE 1394b (Firewire800). 10. List two of the most common serial cables. Null-modem (data transfer) cable. Modem cable. 11. What hardware resources are required by serial ports? IRQ and I/O port addres. 12. What is one of the most versatile ports and also used for printers? The parallel port, or LPT ( Line Printer) port. 13. What was the most common use for SCSI? Servers and mass storage (hard disk, tape backup). 14. Define daisy-chaining Multiple device......

Words: 706 - Pages: 3

Premium Essay

Nt2640

...Network Systems Administration and associate degree in Mobile Communications Technology. The following diagrams indicate how this course relates to other courses in respective programs: Network Systems Administration NT2799 NSA Capstone Project NT2580 Introduction to Information Security NT2670 Email and Web Services NT2640 IP Networking PT2520 Database Concepts NT1330 Client-Server Networking II NT1230 Client-Server Networking I NT1430 Linux Networking PT1420 Introduction to Programming NT1110 Computer Structure and Logic NT1201 Introduction to Networking NT1310 Physical Networking CO2520 Communications SP2750 Group Theories EN1420 Composition II EN1320 Composition I GS1140 Problem Solving Theory GS1145 Strategies for the Technical Professional MA1210 College Mathematics I MA1310 College Mathematics II Networking Technology Courses Programming Technology Courses General Education/ General Studies 1 Date: 7/18/2011 IP Networking Syllabus Mobile Communications Technology MC2799 MCT Capstone Project NT2640 IP Networking MC2560 Mobile Wireless Communication I MC2660 Mobile Wireless Communication II MC2665 Mobile...

Words: 2573 - Pages: 11

Premium Essay

Test

...Description: This course examines security implementations for a variety of Windows platforms and applications. Areas of study include analysis of the security architecture of Windows systems. Students will identify and examine security risks and apply tools and methods to address security issues in the Windows environment. Windows Security Syllabus Where Does This Course Belong? This course is required for the Bachelor of Science in Information Systems Security program. This program covers the following core areas:    Foundational Courses Technical Courses BSISS Project The following diagram demonstrates how this course fits in the program:    IS4799 NT2799 IS4670 ISC Capstone Project Capstone ProjectCybercrime Forensics NSA    NT2580 NT2670  Introduction to  Information Security IS4680 IS4560 NT2580 NT2670 Email and Web Services Hacking and Introduction to  Security Auditing for Compliance Countermeasures Information Security Email and Web Services      NT1230 NT1330 Client-Server Client-Server  Networking I Networking II  IS3230 IS3350 NT1230 NT1330  Issues Client-Server Client-Server  SecurityContext in Legal Access Security Networking I Networking II   NT1110  NT1210 Structure and Introduction to  ComputerLogic Networking    IS3120 IS3110 NT1210 Network  Risk Management in Introduction to General Education / General Studies NT2580 NT2799 Communications Information Technology Introduction to Information Security......

Words: 2305 - Pages: 10

Premium Essay

Nothing

...ITT Technical Institute NT1310 Physical Networking Student Course Package Bring this document with you each week Students are required to complete each assignment and lab in this course package on time whether or not they are in class. Late penalties will be assessed for any assignments or labs handed in past the due date. The student is responsible for replacement of the package if lost. Table of Contents Syllabus 2 Student Professional Experience 19 Graded Assignments and Exercises 23 Labs 47 Documenting your Student Professional Experience 57 ITT Technical Institute NT1310 Physical Networking Onsite Course SYLLABUS Credit hours: 4.5 Contact/Instructional hours: 56 (34 Theory Hours, 22 Lab Hours) Prerequisite(s) and/or Corequisite(s): Prerequisites: NT1210 Introduction to Networking or equivalent Course Description: This course examines industry standards and practices involving the physical components of networking technologies (such as wiring standards and practices, various media and interconnection components), networking devices and their specifications and functions. Students will practice designing physical network solutions based on appropriate capacity planning and implementing various installation, testing and troubleshooting techniques for a computer network. Where Does This Course Belong? | | | NT2799 | | | | | | | | NSA Capstone | | | | | | | Project | | | | | ......

Words: 10839 - Pages: 44

Premium Essay

Wireless Network Connections

...Wireless Network Connections NT1110 Computer Structure and Logic Debbie Beals, Bill Fry, Donald Phillips Introduction If you find yourself in a fast food restaurant, trendy coffee shop or Hotel, your chances of being around a wireless network in the world today are very good. You may connect your computer at home or other electronic devices to a wireless network, also called WiFi or 802.11 networks. Wireless networks are easy to set up and mostly inexpensive. Very soon wireless networking may be available from just about anywhere and at any time. Bluetooth is a universal wireless standard for connecting various digital devices. Bluetooth is simply a way to connect devices to one another without the use of cables that transmits the signal over short distances. Bluetooth is “cable elimination technology”. Wireless Connections What is Wireless? Wireless communication is the transfer of information between two or more points that are not connected by an electrical conductor. The most common wireless technologies use radio. With radio waves distances can be short, such as a few meters for television or as far as thousands or even millions of kilometers for deep-space radio communications. It encompasses various types of fixed, mobile, and portable applications, including two-way radios, cellular telephones, personal digital assistants (PDAs), and wireless networking. Other examples of applications of radio wireless technology include GPS units, garage door......

Words: 2795 - Pages: 12

Premium Essay

Unit

...ITT TECHNICAL INSTITUTE NT1310 Physical Networking GRADED ASSIGNMENTS ------------------------------------------------- Student Professional Experience Project NSA SPE Project 1 (to be completed by the end of NT1310): Install, Configure, Test, Maintain and/or Document the Worksite Local Area Network and Its Components Purpose The purpose of the Student Professional Experience (SPE) project is to provide you an opportunity for work experience in your field or in a related field to add to your résumé. You may have an opportunity to serve your community or work for a local employer for a project that will take between 20 and 30 hours. Project Logistics Career Services will identify an employer with needs in the following areas: Network related tasks (mostly confined to the LAN and Microsoft Windows Server 2008 environments) Students are expected to practice various skills discussed in all the technical courses in Quarters 1 through 3 of the NSA program at an employer’s site on network related tasks (more confined to the LAN and Microsoft Windows Networking with Server 2008 environments) that would involve installation, configuration, testing, maintenance and documentation of the worksite network and its components, and to properly document the technical information in all involved activities. Such documentation will be used as the source material for Items 2 and 3 defined in the Deliverables section of this document. Possible example projects......

Words: 6762 - Pages: 28