Free Essay

Paper Design and Methodology

In: Other Topics

Submitted By ronaldtabunan
Words 422
Pages 2
Company Profile
Stryker Corporation, together with its subsidiaries, operates as a medical technology company. The company operates in three segments: Reconstructive, MedSurg, and Neurotechnology and Spine. The Reconstructive segment offers orthopaedic reconstructive (hip and knee) and trauma implant systems, as well as other related products. The MedSurg segment provides surgical equipment and surgical navigation systems, endoscopic and communications systems, patient handling and emergency medical equipment, reprocessed and remanufactured medical devices, and other medical device products. The Neurotechnology and Spine segment includes neurovascular products, spinal implant systems, and other related products. The company sells its products through local dealers and direct sales force to doctors, hospitals, and other healthcare facilities, as well as through third-party dealers and distributors primarily in the United States, Ireland, Germany, France, Switzerland, the United Kingdom, Japan, Canada, the Pacific region, and Latin America. Stryker Corporation was founded in 1941 and is headquartered in Kalamazoo, Michigan.

Stryker Corporation is a leading maker of specialty surgical and medical product based in Kalamazoo, Michigan. although not yet the household name, Stryker is one of the most consistent profitable growth company in America. In 2003, Stryker posted record sales of 3.6 Billion. After John Brown became chairman in 1977, Stryker achieved 20 percent or more annual earnings per state growth every year until 1998, Stryker acquire Howmedica, the orthopedic division of Pfizer. The acquisition really doubled Stryker’s size,

But restricting charges associated with the acquisition interacted the streak of 20 percent per year earnings per share growth for two years. By 2000 the earning grow, the company was once again attaining its “Gold Standard “of 20 percent or better annual earning growth.

Stryker's surgical products include such instruments as drills, saws, and even cement mixers. The company's Reconstructive division makes artificial hip and knee joints, trauma implants, bone cement, and other orthopedic supplies. The MedSurg Equipment segment houses microsurgery instruments, endoscopy equipment, and communications and patient handling tools. Stryker's Neurotechnology and Spine unit provides rods, screws, and artificial discs for spinal surgeries, as well as coils and stents for cerebral vascular procedures. The firm's products are marketed globally to hospitals, doctors, and other health care facilities via direct sales personnel and distributors.

Stryker Corporation
Company Information
2825 Airview Blvd.
Kalamazoo, MI, 49002 United States
(269) 385-2600 Stryker Corporation Rankings
#308 in FORTUNE 500 (May 2012)
S&P 500 (October 1, 2012)
#423 in FT Global 500 (July 2012)
#308 in FORTUNE 1000 (May 2012)

Top 3 Competitors
Biomet, Inc.
DePuy Inc.
Zimmer Holdings, Inc.

Similar Documents

Premium Essay

Res 531 – Research Methods – Complete Class Includes All Assignments and Final Project Paper

...RES 531 – RESEARCH METHODS – Complete Class Includes All Assignments and Final Project Paper Purchase here Product Description RES 531 Week 2 Assignment 1 – Topic Selection RES 531 Week 3 Assignment 2 – Context of the Problem RES 531 Week 4 Assignment 3 – The Problem Statement RES 531 Week 6 Assignment 4 – Research Questions RES 531 Week 7 Assignment 5 – Significance of the Study RES 531 Week 8 Assignment 6 – Research Design and Methodology RES 531 Week 9 Assignment 7 – Organization of the Study RES 531 Week 10 Assignment 8 – Tentative Reference List RES 531 Week 11 Research Proposal Paper – Final Project Paper RES 531 – RESEARCH METHODS – Complete Class Includes All Assignments and Final Project Paper Purchase here Product Description RES 531 Week 2 Assignment 1 – Topic Selection RES 531 Week 3 Assignment 2 – Context of the Problem RES 531 Week 4 Assignment 3 – The Problem Statement RES 531 Week 6 Assignment 4 – Research Questions RES 531 Week 7 Assignment 5 – Significance of the Study RES 531 Week 8 Assignment 6 – Research Design and Methodology RES 531 Week 9 Assignment 7 – Organization of the Study RES 531 Week 10 Assignment 8 – Tentative Reference List RES 531 Week 11 Research......

Words: 1071 - Pages: 5

Premium Essay

A Framework for Software Quality Assurance Using Agile Methodology

...INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH VOLUME 4, ISSUE 02, FEBRUARY 2015 ISSN 2277-8616 44 IJSTR©2015 A Framework For Software Quality Assurance Using Agile Methodology Maria Sagheer, Tehreem Zafar, Mehreen Sirshar Abstract: Agile methodology that uses iterative and incremental approach is widely used in the industry projects as they can satisfy to the change of requirements. Efficient product delivery is achieved by using short iterations. But assuring the quality in any system is essential and imperative part which is very difficult task, which raises a question that: Is quality is assured in the software which is developed using agile methodology? The research paper proposed a solution and summarizes that how the quality is achieved or assure in agile software development using different factors. The major focus of this research paper is to analyse the quality parameter which assure quality in the agile methodology. The research paper includes the brief overview of the parameters which assure quality in agile. ———————————————————— I. INTRODUCTION. For the successful software engineering, the delivery of high quality software is needed. Mainly the customer satisfaction level is considered as the quality attribute which defines high quality of any system. Traditionally waterfall approach is used for the software development in which system is developed by freezing the requirements....

Words: 5336 - Pages: 22

Premium Essay

Walt Disney

...PROJECT PROPOSAL GUIDE TRS3056 : PROJECT TRS3266 : MEDIA PROJECT TRS3284 : CREATIVE MULTIMEDIA PROJECT I TRS3334 : GRAPHIC DESIGN PROJECT 1 : MINOR PROJECT TRS3242 : VISUAL COMMUNICATION PROJECT I TRS3152 : PROJECT I Introduction Project is a compulsory part of the program structure in Bachelor in Information and Communication Technology, Bachelor in Creative Multimedia, Bachelor in Graphic Design, Bachelor in Game Design and Animation, Bachelor in Media Science and Bachelor in Visual Communication. It builds on the skills and knowledge learned in the first two and half years; to enable students to use these to demonstrate competence in the theory and practice based on their respective programs. Aims of Project The main aims of this project are: 1. To provide students with a realistic group experience in designing, implementing and documenting computer, multimedia, and graphics products in the form of applications, systems, design, etc. based on the needs of clients/stakeholders. 2. To let students apply their knowledge and skills in handling tasks with appropriate tools. 3. To provide a learning environment for students to independently manage their projects under supervision. 4. To build students’ ability to present and rationalize their work with confidence and logics. 5. To enable the students to delegate tasks and work as a team, and manage their project time and budget accordingly. General proposal format: 1. Paper Size Type Color 2....

Words: 1888 - Pages: 8

Premium Essay

Information System Strategic Planning

...A Formal methodical approach to systems analysis, requirements engineering, systems design, development, and construction may offer a reduction in development and certain aspects of life cycle support expenses. Corporate expenses may reach approximately 5% of their gross income on information systems development and support. This equates to approximately $15,000,000 to $35,000,000 annually (Whitemarsh Information Systems Corp. 2008, p.). Information systems may cost significantly less. In comparison, information systems, contingent upon other factors such as size of the company, and complexity of the information system cost may range anywhere from $2,000,000 to $10,000,000 per system. Corporate leadership clearly has a strong influence upon information system expenditures and may have unrealistic expectations associated with anticipated return on investments in information systems. This research paper explorers the need for a formalized approach to systems development and the methodologies available to the developer. Additionally, this research...

Words: 6140 - Pages: 25

Free Essay

Conjoint Analysis

...Business Research Methods Project On Conjoint Analysis Identifying Key Product Attributes & Product Designing of Mobile Phones Abstract This paper intends to explore consumer preferences for Mobile phones attributes, to determine the optimal combination for consumers, and to provide manufacturers a reference for their marketing strategies. In this study, consumers were divided into several demographics (age, gender, occupation) and individual preferences for various mobile phone attributes were compared. Consumers showed significant demographical difference in their preferences over the combination of mobile phones attributes. The various combination of mobile phone attributes were grouped together. Subjects were asked to rank the 22 product profiles (Pair1 to Pair22) from the most to the least preferred. The variables Pref1 through Pref7 contain the IDs of the associated product profiles, that is, the card IDs. Subject 1, for example, liked pair13 most of all, so PREF1 has the value 13. Analysis of the data is a task that requires the use of command syntax—specifically, the CONJOINT command. The necessary command syntax has been provided in the file conjoint.sps. Literature Review N. Soutar et al. (2008), the study aims to examine its relevance in exploring the trade-offs followers make about leaders. The aim was to have an integrated understanding of leadership....

Words: 3607 - Pages: 15

Free Essay

Aircraft Design

...Chapter 1 Introduction Standard aircraft design processes have traditionally been divided in the following stages []: * Feasibility studies: design needs to satisfy prescribed performance requirements along with other geographical and cost constraints, * Conceptual design: design on paper or on computer, involves analysis tools covering performance evaluation in different maneuvers, * Preliminary design: laying of proper moulds for building airframes, * Prototype building: finally arriving at a scaled down prototype, * Wind tunnel testing: on the developed prototype for aerodynamics database generation, * Flight testing: * Stability and control augmentation * Certification: requires an airplane to satisfy certain handling and flying qualities requirements. This design process thus have nearly always left the stability and dynamics aspects to the end, where six degrees of freedom of motion are used to evaluate flying and handling qualities of aircraft. Finally, if these criteria do not match with the required satisfaction level of pilot or the industry standards, design of control systems are needed. To our knowledge (due to proprietary nature of the trade) and based on text book information, no analysis tools has been developed in the past for aircraft design which uses six degree of freedom equations of rigid aircraft motion right from the beginning....

Words: 681 - Pages: 3

Premium Essay


...• Prototyping may be of whole system or part of the system to tease out particular problem areas • Early versions of prototype may be paper-based • Important users are identified and involved in workshops at early stages of development; these are terms Joint Requirements Planning and Joint Application Design workshops • JAD designed to gather all the project stakeholders together in one forum in order to reach mutually...

Words: 847 - Pages: 4

Premium Essay


...Type: Research paper Author(s): Pierre-Jean Messe Source: International Journal of Manpower Volume: 33 Issue: 4 2012AbstractPurpose – The purpose of this paper is to investigate whether employers’ attitudes towards older workers, especially regarding promotions, really affect their retirement intentions, distinguishing between men and women. Design/methodology/approach – First, the author uses the 1992 wave of the Health and Retirement Study to estimate, through a Fields decomposition, the relative contribution of the feeling of an older worker to be discriminated against regarding promotions; and to explain the self-reported probability to work full time after 62, decomposing by gender. Second, using the two first waves of HRS, the author removes any bias due to time-constant unobserved heterogeneity, to test whether the individual feeling of being passed over for promotion may be misreported, owing to a strong preference for leisure. Finally, the author examines the effect of a change in this variable over time on the intentions to exit early. Findings – The Fields decomposition shows that feeling passed over for promotion plays a non-negligible role to predict retirement plans but only for women. In addition, using panel data allows a misreporting bias to be exhibited that may lead to underestimating of the negative effect of discriminatory practices towards older workers on their retirement plans....

Words: 2582 - Pages: 11

Premium Essay


...ACHG300 HISTORY OF GRAPHIC DESIGN 3 ASSIGNMENT 5 and 6 This module is presented on NQF Level 6 FACULTY OF CREATIVE ARTS AND COMMUNICATION Module leader: MIRANTHE VAN STADEN GARBETT Phone: (011) 690-1825 Office number: 4 Lecturer (Remote Campus): E-mail: Due Dates: Assignment 5: Week 13 and 20 Assignment 6: Week 27 Assessments: Assignment 5: 200 Marks ( 10% final mark) Minus 5% per day deducted for late submissions Phone: Assignment 6: 100% (30% final mark). No late submissions will be accepted 1) Learning Outcomes Through this assignment, the student should achieve the following outcomes: • • • • Research, structure and write a formal academic article. Formulate an appropriate research question Apply an appropriate methodology to a specific topic Research, acquire and present in digital format a specialised knowledge of an aspect or area of African discourse or aesthetics, whether historical or contemporary. • • • Apply knowledge of history and/or theory to the chosen topic and evaluate contemporary relevance Identify and evaluate a specific case study that illuminates an aspect of African discourse or African aesthetics....

Words: 2263 - Pages: 10

Premium Essay


...Data Warehousing Methodologies Using a common set of attributes to determine which methodology to use in a particular data warehousing project. DATA INTEGRATION TECHNOLOGIES have experienced explosive growth in the last few years, and data warehousing has played a major role in the integration process. A data warehouse is a subjectoriented, integrated, time-variant, and nonvolatile collection of data that supports managerial decision making [4]. Data warehousing has been cited as the highest-priority post-millennium project of more than half of IT executives. A large number of data warehousing methodologies and tools are available to support the growing market. However, with so many methodologies to choose from, a major concern for many firms is which one to employ in a given data warehousing project. In this article, we review and compare several prominent data warehousing methodologies based on a common set of attributes. Online transaction processing (OLTP) systems are useful for addressing the operational data needs of a firm. However, they are not well suited for supporting decision-support queries or business questions that managers typically need to address. Such questions involve analytics including aggregation, drilldown, and slicing/dicing of data, which are best supported by online analytical processing (OLAP) systems. Data warehouses support OLAP applications by storing and maintaining data in multidimensional format....

Words: 4067 - Pages: 17

Premium Essay

Hoosier Burger

...According to Valacich (2009), phase three is when “…you must design all aspects of the system from input and output screens to reports, databases, and computer processes…” (Valacich 18). The final product of the design phase is the physical system...

Words: 817 - Pages: 4

Premium Essay

Information Systems and Accounting Research

...Geerts, author of “A Design Science Research Methodology and Its Application to Accounting Information Systems Research,” asserts most of research currently conducted in the accounting information systems (AIS) and information systems (IS) areas focuses on understanding why things work the way they do, also known as “natural science (Geerts, 2011).” The primary goal of the paper was to introduce the design science research methodology (DSRM) into accounting information systems (AIS) literature by discussing the DSRM, applying the DSRM to different AIS design science papers, and then integrating the DSRM as part of the operational AIS literature (Geerts, 2011). “Currently, integration is increasingly needed in the business environment. This need emerges from the efficiency and synergy requirements necessary in a complex and turbulent environment. In other words, integration is needed to facilitate coordination, which is again related to the building of competitive advantage.” (Granlund & Malmi, 2002, p. 305). Detail Geerts’ introduction gives definitions and history of the concept of DSRM and AIS so that the reader may transition along with the article. There is discussion of each methodology giving the history and the science behind it and then he moves into how the application of DSRM was discussed in the AIS area....

Words: 611 - Pages: 3

Premium Essay

Computer Addiction

...It will give students a general introduction to scientific research, its methodologies, its challenges and its organization. This course permits an understanding of the various decisions and steps involved in preparing a research proposal which includes the problem and its background, literature review, research methodology as well as a critically informed assessment of published research. Also, students will be introduced to a range of research tools, data analysis and will be equipped to plan and organize their research, as well as develop their data collecting instrument. B. COURSE GOALS AND OBJECTIVES: | | | |Course Objectives |On completion of this course, students will be able to: | | |Understand the concepts, approaches and procedures underlying the conduct of research. | | |Develop a research problem, select the appropriate tools and construct data collecting instrument; | | |Prepare a review of literatures and studies relevant to the topic selected which will be of help in preparing a | | |research proposal....

Words: 1540 - Pages: 7

Premium Essay


...Both ‘a’ and ‘b’ IIBM Institute of Business Management Examination Paper: Project Management 6. Costs associated with the planning process include: 7. CPA stands for: a. Planer’s tools b. Opportunity cost c. Planned labour and associated expenses d. All of the above a. Critical Path Analysis b. Common Path Analysis c. Critical Path Algorithm d. Common Problem Analysis 8. The project duration with the normal activity time is ____days. 9. The nature of the work organization is important as it: a. Defines responsibility and authority b. Outlines reporting arrangements c. Determines the management overhead d. All of the above 10. Matrix Management was invented by d. Frederick Taylor 1. Define ‘Cost Estimating Techniques’. 2. Write a note on ‘Critical Path Analysis’. 3. Differentiate between General Management and Project...

Words: 2912 - Pages: 12

Premium Essay

Gile Methodology

...Agile Methodology Brian Crites System Analysis and Design July 16, 2012 Summer Term B 2012 Professor David A. Ostrowski Agile Methodology is an approach to project management that for the most part is used with software development. Agile Methodology is a very important part of software development. Throughout this paper I intend to discuss what the movement toward agility means for the future of systems analysis and design (Hoffer, George, & Valacich, 2011). In the year of 2001 many proponents met in Utah and came to discuss and agree on underlying principles (Hoffer, George, & Valacich, 2011). Through this discussion they came up with the “The Agile Manifesto” (Hoffer, George, & Valacich, 2011). There is very important information listed in the Agile Manifesto as you can see from the information I have provided, according to my textbook, below. “The Manifesto for Agile Software Development Seventeen anarchists agree: We are uncovering better ways of developing software by doing it and helping others do it. Through this work we have come to value: • Individuals and interactions over processes and tools. • Working software over comprehensive documentation. • Customer collaboration over contract negotiation. • Responding to change over following a plan. That is, while we value the items on the right, we value the items on the left more....

Words: 958 - Pages: 4