Free Essay

Preparation of Waste Leather Polymer Composite

In:

Submitted By leriad1987
Words 437
Pages 2
Highlight on My Research Background
Overview : Polymeric Composite has emerged as a new technology for innovation of new materials with low cost, high durability, more effectiveness, moreover reduction of environmental pollution. Leather industry is one of the highly environmental pollution creating industry. Solid wastes are being generated from the tanneries 88 metric tons/day on an average basis in my country, Bangladesh.
In my research work I have attempted to reuse, recycle the leather waste. Moreover the aim is to reduce the environmental pollution.
My research work was conducted to make bioapplicable materials from polyester resin reinforced with scrap leather fiber. The resulting polymer composite has been named “Leather Plastic”. One of the most important objectives of my research work is to use natural leather fiber which is biodegradable. So a definite amount of polyester resin could be replaced by natural fiber, which is very important to our environment.
Manufacturing process: The composite was prepared by Wet Layup method. Leather fiber was treated with Unsaturated Polyester Resin and then fabricated and characterized. The matrix was prepared by mixing Unsaturated Polyester Resin with Polyvinyl Alcohol (PVA) solution. The grinded leather fiber was used as the reinforcement. After mixing the matrix with the reinforcement, peroxide was used as a radical initiator to induce polymerizations. After curing period the mechanical properties of the composite was characterized.
Test performed on Leather Plastic: Tensile Strength, Elongation, Young's modulus, Izod Impact Strength , Bending strength , Water uptake, Soil Test, DMA test, DTA-TGA test, SEM analysis, Ultrasound effect, Cobalt-60 gamma Radiation effect. Instruments: I have good skill on computer and Modern Sophisticated Analytical Instruments such as Electro-chemical Analyzer, Scanning Electron Microscope (SEM), Differential Scanning Calorimeter (DSC), Atomic Absorption Spectrophotometer (AAS), Dynamic Mechanical Analyzer (DMA), Universal Testing Machine (UTM), Izod Impact Strength Tester,Digital Ultrasound Bath, Cobalt- 60 gamma radiation source etc. Note: My research is based on polymeric fiber. This research is related to “Thermal and mechanical properties of biodegradable polymers” which is the topic of the PhD position . Conference Paper:
1. Md. Riadul Islam, Mubarak Ahmad Khan, Shamsun Nahar ,Fazlul Karim, Shamim Hussain, Amol Kanti Deb, Hira Lal Paul “Preparation and Characterization of waste leather Reinforces Polymeric Composite” Sent to EPF 2011,XII GEP Congress, 26th July-1st Aug, Granada, Spain.
2. Md. Riadul Islam , Mubarak Ahmad Khan, Shamsun Nahar, Fazlul Karim, Hira Lal Paul, Shamim Hussain, Amol Kanti Deb, Hira Lal Paul “Investigation on Mechanical Properties of Leather Composite Prepared from Solid Waste Crusted Scrap leather” sent to International Conference on Mechanical Engineering (ICME 2011), 18th Dec-20th Dec,2011, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh.

Similar Documents

Free Essay

Food Packaging & Envrronmental Effect

...still be wholesome at the time of consumption. However, packaging technology must balance food protection with other issues, including energy and material costs, heightened social and environmental consciousness, and strict regulations on pollutants and disposal of municipal solid waste. Municipal solid waste (MSW) consists of items commonly thrown away, including packages, food scraps, yard trimmings, and durable items such as refrigerators and computers. Legislative and regulatory efforts to control packaging are based on the mistaken perception that packaging is the major burden of MSW. Instead, the U.S. Environmental Protection Agency (EPA) found that approximately only 31% of the MSW generated in 2005 was from packaging-related materials, including glass, metal, plastic, paper, and paperboard—a percentage that has remained relatively constant since the 1990s despite an increase in the total amount of MSW. Nonpackaging sources such as newsprint, telephone books, and office communication generate more than twice as much MSW (EPA 2006a). Food is the only product class typically consumed 3 times per day by every person. Consequently, food packaging accounts for almost two-thirds of total packaging waste by volume...

Words: 17081 - Pages: 69

Free Essay

Bangladesh Garments Export

...Bangladesh garment exports boom despite disasters Published July 09, 2013 AFP * In this photograph taken on June 23, 2010, Bangladeshi women sew clothes in a garment factory in Ashulia. Output from Bangladesh's accident-prone garment sector has increased in June, with demand from foreign retailers still growing despite the country's factory disaster in April. (AFP/File) DHAKA (AFP) –  Output from Bangladesh's accident-prone garment sector increased in June, data showed Tuesday, with demand from foreign retailers still growing despite the country's factory disaster in April. At least 1,129 people were killed when the Rana Plaza factory complex collapsed outside the capital Dhaka in April, sparking demonstrations against Western brands and prompting some retailers to threaten to cancel orders. Government data released on Tuesday showed that the country's total exports -- 80 percent of which come from the garment sector -- soared by 16 percent year-on-year in June to $2.7 billion, following an increase of 15 percent in May. "The disasters didn't have much impact. They are scattered incidents," head of the government's Export Promotion Bureau (EPB) Shuvhashish Bose told AFP, referring to the Rana Plaza tragedy and other factory fires that have killed another 130 workers since November. Total exports from Bangladesh, the second-biggest clothing manufacturer in the world after China, grew by 11 percent to a record $27.02 billion in the 2012-13 financial year to June. ...

Words: 18334 - Pages: 74

Free Essay

Textile Dictionary

...® To the best of our knowledge, the information contained herein is accurate. However, neither Celanese Acetate LLC nor any of its divisions or affiliates can accept liability of any kind for the accuracy or completeness thereof. Final determination of the suitability of any information or material for the use contemplated, or its manner of use, and whether the suggested use infringes any patents is the sole responsibility of the user. ©2001. Copyright Celanese Acetate LLC. All Rights Reserved. Information about this book can be obtained from your Celanese Acetate sales or technical service representative or by contacting: 1-800-222-5543 Celanese Acetate Three Park Avenue New York, NY 10016 phone: 212-251-8050 fax: 212-251-8037 or Celanese Acetate 2300 Archdale Drive Charlotte, NC 28210 phone: 704-554-3843 fax: 704-554-3851 © 2001, Celanese Acetate LLC Foreword ______________________________________________________ This Complete Textile Glossary is intended to be a convenient reference for textile terminology. Although it covers all types of textile terms broadly, its special emphasis is on manufactured fibers - what they are, how they are made, and how they are used. The first two editions of this dictionary were published under the title Man-Made Fiber and Textile Dictionary by the former Celanese Corporation to provide a source for employees. A third edition of the dictionary, with expanded listings and illustrations, was offered in response to numerous...

Words: 22490 - Pages: 90

Premium Essay

Nanotechnology Applications for Clean Water Solutions for Improving

...NaNotechNology applicatioNs for cleaN Water Micro & NaNo TechNologies series editor: Jeremy ramsden Professor of Nanotechnology Microsystems and Nanotechnology Centre, Department of Materials Cranfield University, United Kingdom the aim of this book series is to disseminate the latest developments in small scale technologies with a particular emphasis on accessible and practical content. these books will appeal to engineers from industry, academia and government sectors. for more information about the book series and new book proposals please contact the publisher, Dr. Nigel hollingworth at nhollingworth@williamandrew.com. http://www.williamandrew.com/MNt NaNotechNology applicatioNs for cleaN Water edited by Nora savage Office of Research and Development, US Environmental Protection Agency and (in alphabetical order) Mamadou Diallo Materials and process simulation center, Division of chemistry and chemical engineering, california institute of technology Jeremiah Duncan Nanoscale Science and Engineering Center, University of Wisconsin-Madison anita street Office of Research and Development, US Environmental Protection Agency and Center of Advanced Materials for the Purification of Water with Systems, University of Illinois at Urbana-Champaign richard sustich N o r w i c h , N Y, U S A copyright © 2009 by William andrew inc. No part of this book may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying...

Words: 90139 - Pages: 361

Premium Essay

Analysis

...Entrepreneurship Development Code: 209 Credits: 3 Unit I Meaning of Entrepreneurship, types of entrepreneurship, concept of intrapreneur, importance, developing entrepreneurship through training and motivation. Unit II Idea Generation, Identifying and Evaluating business Opportunities, idea generation and evaluation, Lifecycle and growth plans and the role of the entrepreneur in each stage, Exit options, Preparation and Presentation of Business Plans. Unit III Post-entry entrepreneurial issues: Implementing Business plans, Forms of business ownership, Professionalization and Management Succession, Reinventing and turn around. Support systems for entrepreneurs: Institutional support: Training Institutions, Financial Institutions, Research and Technology, Marketing and Legal aspects, Taxation benefits, Global aspects of Entrepreneurship SUGGESTED READINGS: 1. Anjan Raichaudhuri (2010) Managing New Ventures- Concepts and cases on Entrepreneurship, PHI Learning Pvt. Ltd., New Delhi. 2. Hisrich, R.D, Peter, M. P and Shepherd, D.A (2006) Entrepreneurship, New Delhi: Tata Mcgraw Hill, sixth edition. 3. Dollinger, Mark J (2004) Entrepreneurship: strategies and resources, Delhi: Pearson Education (Singapore) 4. Sharma, Sudhir, Singh, Balraj and Singhal, Sandeep (2005) Entrepreneurship development, New- Delhi: Wisdom Publications 5. Saini, J S and Rathore, B S (2001), Entrepreneurship: theory and practice....

Words: 9156 - Pages: 37

Free Essay

My Sence

...Date of Sale Seal of Bank / Institution with Address Initial of authorized sale clerk CONTENTS Sl. No. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Appendix I. II. III. IV . V . VI. VII. VIII. IX. List of Institutions participated in CCB(AIEEE) -2010-Counseling .......................................................... 007 Nomenclature of Disciplines in Degree Engineering & Technology/ Architecture/Town Planning (Approved by AICTE) ............................................................................... 009 Syllabus .................................................................................................................................................... 010 Addresses of selling centers from where Application Forms can be procured against Cash Payment only ....................................................................................................... 019 Instructions for completing and sending the Application Form By Post ................................................. 024 List of Cities where All India Engineering/Architecture Entrance Examination will be conducted ................................................................................................................. 027 List of cities where on line examination will be conducted ...................................................................... 029 A. Procedure to be followed in conduct of AIEEE ...............................................................................

Words: 17067 - Pages: 69

Premium Essay

Mfg. Trends in 2020

...Trends in manufacturing to 2020 A foresighting discussion paper Future Manufacturing Industry Innovation Council i Date: 30 September 2011 For more information, or to comment on the paper, please contact: Manager Future Manufacturing Department of Innovation, Industry, Science and Research GPO Box 9839 Canberra ACT 2601 Phone: (02) 6213 6000 Facsimile: (02) 6213 7000 Email: Futuremanufacturing@innovation.gov.au ii Future Manufacturing Council discussion paper: Trends in manufacturing to 2020 Table of Contents Executive summary ....................................................................................................................................1 Background.................................................................................................................................................2 Future Manufacturing Council................................................................................................................2 Defining manufacturing...........................................................................................................................2 Profile of Australian manufacturing........................................................................................................4 Trends to 2020 ... and beyond: Issues and opportunities for Australian manufacturing...................12 Terms of trade driving value and volatility of the Australian dollar and structural changes in the economy – an upside...

Words: 14303 - Pages: 58

Free Essay

Maglev

...*3963103* [3963] – 103 T.E. (Petroleum) (Semester – I) Examination, 2011 DRILLING & PRODUCTION OPERATIONS (2003 Course) Time : 3 Hours Max. Marks : 100 Instructions : 1) Question Nos. 1 and 5 are compulsory. Out of the remaining attempt 2 questions from Section I and 2 questions from Section II. 2) Answers to the two Sections should be written in separate books. 3) Neat diagrams must be drawn wherever necessary. 4) Black figures to the right indicate full marks. 5) Use of Logarithmic Tables, Slide Rule, Mollier Charts, Electronic Pocket Calculator and Steam Tables is allowed. 6) Assume suitable data, if necessary. SECTION – I 1. What are different systems on a drilling rig ? Explain any one in detail with suitable diagramme. 18 2. a) Calculate Bottom hole pressure if well depth is 2500 m and mud weight is 1.2 gm/cc. b) Calculate mud weight if mud gradient is 0.87 psi/ft. ′ c) Calculate volume bbl/meter for drill pipe O.D. = 5′ inch and I.D. = 4.276 inch. 2 2 2 10 8 8 16 d) Draw circulation system on a drilling rig. 3. a) Discuss IADC classification of a bit in details. b) Discuss different factors affecting rate of penetration in details. 4. Write short note on : i) Coring ii) Fishing tools iii) BOP iv) Directional well P.T.O. [3963] – 103 -2- *3963103* SECTION – II 5. a) Discuss different types of casings and function of the casings in brief. b) Discuss different types of well completion techniques. 6. a) Discuss primary cementation process with...

Words: 172166 - Pages: 689

Premium Essay

Isi List

...ISI, IBSS & SA DHET - FOR 2012 SUBMISSION TITLE LIST COUNTRY ISSN E-ISSN PUBLISHER'S DETAILS Subject classifaction International Accreditation - SA JOURNALS 4Or-A Quarterly Journal Of Operations Research ISI SCIENCE A + U-Architecture And Urbanism ISI ARTS & HUMANITIES A Contrario IBSS Aaa-Arbeiten Aus Anglistik Und Amerikanistik ISI ARTS & HUMANITIES Aaohn Journal ISI SCIENCE Aaohn Journal ISI SOC SCIENCE Aapg Bulletin ISI SCIENCE Aaps Journal ISI SCIENCE Aaps Pharmscitech ISI SCIENCE Aatcc Review ISI SCIENCE Abacus: Journal Of Accounting, Finance And Business Studies IBSS Abacus-A Journal Of Accounting Finance And Business StudiesISI SOC SCIENCE Abdominal Imaging ISI SCIENCE Abhandlungen Aus Dem Mathematischen Seminar Der UniversISI SCIENCE Abstract And Applied Analysis ISI SCIENCE Abstracts Of Papers Of The American Chemical Society ISI SCIENCE Academia-Revista Latinoamericana De Administracion ISI SOC SCIENCE Academic Emergency Medicine ISI SCIENCE Academic Medicine ISI SCIENCE Academic Pediatrics ISI SCIENCE Academic Psychiatry ISI SOC SCIENCE Academic Radiology ISI SCIENCE Academy Of Management Annals ISI SOC SCIENCE Academy Of Management Journal ISI SOC SCIENCE Academy Of Management Journal IBSS Academy Of Management Learning & Education ISI SOC SCIENCE Academy Of Management Perspectives ISI SOC SCIENCE Academy Of Management Perspectives IBSS Academy Of Management Review ISI SOC SCIENCE Academy Of Management Review IBSS Academy Of Marketing Science Review IBSS Acadiensis...

Words: 151197 - Pages: 605

Premium Essay

Health Promotion and Prevention

...NINTH EDITION Burton’s MICROBIOLOGY FOR THE HEALTH SCIENCES Paul G. Engelkirk, PhD, MT(ASCP), SM(AAM) Biomedical Educational Services (Biomed Ed) Belton, Texas Adjunct Faculty, Biology Department Temple College, Temple, TX Janet Duben-Engelkirk, EdD, MT(ASCP) Biomedical Educational Services (Biomed Ed) Belton, Texas Adjunct Faculty, Biotechnology Department Temple College, Temple, TX Acquisitions Editor: David B. Troy Product Manager: John Larkin Managing Editor: Laura S. Horowitz, Hearthside Publishing Services Marketing Manager: Allison Powell Designer: Steve Druding Compositor: Maryland Composition/Absolute Service Inc. Ninth Edition Copyright © 2011 Lippincott Williams & Wilkins, a Wolters Kluwer business © 2007 Lippincott Williams & Wilkins, © 2004 Lippincott Williams & Wilkins, © 2000 Lippincott Williams & Wilkins, © 1996 Lippincott-Raven, © 1992, 1988, 1983, 1979 JB Lippincott Co. 351 West Camden Street Baltimore, MD 21201 Printed in the People’s Republic of China All rights reserved. This book is protected by copyright. No part of this book may be reproduced or transmitted in any form or by any means, including as photocopies or scanned-in or other electronic copies, or utilized by any information storage and retrieval system without written permission from the copyright owner, except for brief quotations embodied in critical articles and reviews. Materials appearing in this book prepared by individuals as part of their official duties as U.S. government employees...

Words: 118758 - Pages: 476

Premium Essay

Dac Test Document

...BRE Building Elements Foundations, basements and external works Performance, diagnosis, maintenance, repair and the avoidance of defects H W Harrison, ISO, Dip Arch, RIBA P M Trotman BRE Garston Watford WD25 9XX Prices for all available BRE publications can be obtained from: CRC Ltd 151 Rosebery Avenue London, EC1R 4GB Tel: 020 7505 6622 Fax: 020 7505 6606 email: crc@construct.emap.co.uk BR 440 ISBN 1 86081 540 5 © Copyright BRE 2002 First published 2002 BRE is committed to providing impartial and authoritative information on all aspects of the built environment for clients, designers, contractors, engineers, manufacturers, occupants, etc. We make every effort to ensure the accuracy and quality of information and guidance when it is first published. However, we can take no responsibility for the subsequent use of this information, nor for any errors or omissions it may contain. Published by Construction Research Communications Ltd by permission of Building Research Establishment Ltd Requests to copy any part of this publication should be made to: CRC Ltd Building Research Establishment Bucknalls Lane Watford, WD25 9XX BRE material is also published quarterly on CD Each CD contains BRE material published in the current year, including reports, specialist reports, and the Professional Development publications: Digests, Good Building Guides, Good Repair Guides and Information Papers. The CD collection gives you the opportunity to build a comprehensive library...

Words: 167696 - Pages: 671

Free Essay

Harley Davidson

...WWW.HUL.CO.IN Hindustan Unilever Limited  Annual Report 2014-15 FOR FURTHER INFORMATION ON OUR ECONOMIC, ENVIRONMENTAL AND SOCIAL PERFORMANCE, PLEASE VISIT OUR WEBSITE: HINDUSTAN UNILEVER LIMITED Registered Office: Unilever House, B. D. Sawant Marg, Chakala, Andheri (East), Mumbai - 400 099 CIN : L15140MH1933PLC002030 HUL INVESTOR RELATIONS APP Scan the code given below to download the HUL Investor Relations App for iOS and Android MAKING SUSTAINABLE LIVING COMMONPLACE ANNUAL REPORT 2014-15 Awards and Recognition FINANCIAL YEAR 2014-15 SAW MANY SUCCESSES. SOME OF THE ACHIEVEMENTS ARE LISTED BELOW. 1 2 3 4 1 BrandZ TM Awards 2 ‘Client of the Year’ at Effies 3 Dun and Bradstreet Corporate Awards 4 Greentech Award OUR BRANDS • HUL was the No. 1 Indian company to feature on the Forbes list of the World’s Most Innovative Companies. • HUL’s mobile radio channel ‘Kan Khajura Tesan’ won three Gold Lions at the Cannes International Festival of Creativity. • Ten HUL brands featured in the first ever BrandZ™ Top 50 Most Valuable Indian Brands ranking. • The Kissanpur campaign won Silver at the Jay Chiat Strategic Excellence Awards 2014. • HUL was the ‘Client of the Year’ at Effies 2014 and ‘Media Client of the Year’ at Emvies 2014. OUR PEOPLE UNILEVER SUSTAINABLE LIVING PLAN (USLP) The USLP is our key differentiator. It is our blueprint to drive sustainable growth and has three big goals, i.e....

Words: 99058 - Pages: 397

Premium Essay

Kotler

...Ingredient Branding Philip Kotler· Waldemar Pfoertsch Ingredient Branding Making the Invisible Visible Professor Philip Kotler Kellogg Graduate School of Management Northwestern University Evanston, IL 60208, USA p-kotler@kellogg.northwestern.edu Professor Waldemar Pfoertsch China Europe International Business School 699 Hongfeng Rd. Shanghai 201206, China wap@ceibs.edu e-ISBN 978-3-642-04214-0 ISBN 978-3-642-04213-3 DOI 10.1007/978-3-642-04214-0 Springer Heidelberg Dordrecht London New York Library of Congress Control Number: 2010926489 © Springer-Verlag Berlin Heidelberg 2010 This work is subject to copyright. All rights are reserved, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilm or in any other way, and storage in data banks. Duplication of this publication or parts thereof is permitted only under the provisions of the German Copyright Law of September 9, 1965, in its current version, and permission for use must always be obtained from Springer. Violations are liable to prosecution under the German Copyright Law. The use of general descriptive names, registered names, trademarks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. Cover design: WMXDesign GmbH, Germany Printed...

Words: 106805 - Pages: 428

Premium Essay

Future of Technology

...THE FUTURE OF TECHNOLOGY OTHER ECONOMIST BOOKS Guide to Analysing Companies Guide to Business Modelling Guide to Business Planning Guide to Economic Indicators Guide to the European Union Guide to Financial Markets Guide to Management Ideas Numbers Guide Style Guide Dictionary of Business Dictionary of Economics International Dictionary of Finance Brands and Branding Business Consulting Business Ethics Business Strategy China’s Stockmarket Globalisation Headhunters and How to Use Them Successful Mergers Wall Street Essential Director Essential Economics Essential Finance Essential Internet Essential Investment Essential Negotiation Pocket World in Figures THE FUTURE OF TECHNOLOGY THE ECONOMIST IN ASSOCIATION WITH PROFILE BOOKS LTD Published by Profile Books Ltd 3a Exmouth House, Pine Street, London ec1r 0jh Copyright © The Economist Newspaper Ltd 2005 All rights reserved. Without limiting the rights under copyright reserved above, no part of this publication may be reproduced, stored in or introduced into a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photocopying, recording or otherwise), without the prior written permission of both the copyright owner and the publisher of this book. The greatest care has been taken in compiling this book. However, no responsibility can be accepted by the publishers or compilers for the accuracy of the information presented. Where opinion is expressed it is that of the author and does not necessarily...

Words: 128899 - Pages: 516

Free Essay

Industrial Engineering

...McGraw-Hill Create™ Review Copy for Instructor Espinoza. Not for distribution. Course BBE 4505 Omar Espinoza University Of Minnesota NATURAL RESOURCES McGraw-Hill Create™ Review Copy for Instructor Espinoza. Not for distribution. http://create.mcgraw-hill.com Copyright 2012 by The McGraw-Hill Companies, Inc. All rights reserved. Printed in the United States of America. Except as permitted under the United States Copyright Act of 1976, no part of this publication may be reproduced or distributed in any form or by any means, or stored in a database or retrieval system, without prior written permission of the publisher. This McGraw-Hill Create text may include materials submitted to McGraw-Hill for publication by the instructor of this course. The instructor is solely responsible for the editorial content of such materials. Instructors retain copyright of these additional materials. ISBN-10: 1121789048 ISBN-13: 9781121789043 McGraw-Hill Create™ Review Copy for Instructor Espinoza. Not for distribution. Contents 1. Preface 1 2. Methods, Standards, and Work Design: Introduction 7 Problem-Solving Tools 27 3. Tex 29 4. Operation Analysis 79 5. Manual Work Design 133 6. Workplace, Equipment, and Tool Design 185 7. Work Environment Design 239 8. Design of Cognitive Work 281 9. Workplace and Systems Safety 327 10. Proposed Method Implementation 379 11. Time Study 413 12. Performance Rating and Allowances 447 13. Standard Data and Formulas 485 14. Predetermined Time Systems 507...

Words: 294686 - Pages: 1179