Premium Essay

Subnet Assignment

In: Computers and Technology

Submitted By bcdonley
Words 832
Pages 4
Brett Donley
Subnetting assignment

7. subnetted to 10808 subnets and provide information for subnets #1, #726, #4213, and #10808
Subnet #: 1 | | Network Address | | Broadcast Address | | Subnet Mask: | | Range of IP Addresses: | to | Subnet #: 726 | | Network Address | | Broadcast Address | | Subnet Mask: | | Range of IP Addresses: | – | Subnet #: 4213 | | Network Address | | Broadcast Address | | Subnet Mask: | | Range of IP Addresses: | – | Subnet #: 10808 | | | Network Address | | | Broadcast Address | | | Subnet Mask: | | | Range of IP Addresses: | – | |

Subnet #1:
Converting the IP address into binary numbers = 01000000.00000000.00000000.00000000
The /8 at the end of the IP address means that the subnet mask will consist of eight 1’s for the first octet and then 24 0s following
Network Bits – Host Bits
255. 0. 0. 0.
Both binary numbers are lined up:
01000000.00000000.00000000.00000000 - IP Address
11111111.00000000.00000000.00000000 - Subnet Mask
Left most bits w/ the 1’s = Network Bits
The rest is Host bits. We will take host bits and add them to the network portion.
Since we have 10808 subnets, 2 to the power of 14 is the smallest number that works (2^14 = 16384) (2^13 = 8192 which is too small).
We will take 14 bits from the host portion of the address and use it as network bits.
01000000.00000000.00000000.00000000 - IP Address
11111111.11111111.11111100.00000000 - New Subnet Mask 128 64 32 16 8 4 2 1 - add bold
14 additional 0s at this point have...

Similar Documents

Premium Essay

Subnet Assignment

...CMIT 265 Subnetting Assignment Subnetting Assignment: subnetted to 46 subnets and provide information for subnets #1, #4, #5, and #46 Step 1: Convert the network address to binary is a class C address with a subnet mask of 24 bits of ones First Octet, 128=1, 64=1, 32=0, 16=1, 8=0, 4=1, 2=1, 1=1 215 = 11010111. Second Octet =, 128=1, 64=1, 32=1, 16=1, 8=1, 4=0, 2=1, 1=1 251 = 11111011 Third Octet =, 128=1, 64=0, 32=0, 16=1, 8=0, 4=0, 2=0, 1=1 145 = 10010001 Fourth Octet = 0 11010111.11111011.10010001.00000000 Network address Step 2: Convert Subnet mask into binary First Octet, 128=1, 64=1, 32=1, 16=1, 8=1, 4=1, 2=1, 1=1 255 = 11111111 Second Octet, 128=1, 64=1, 32=1, 16=1, 8=1, 4=1, 2=1, 1=1 255 = 11111111 Third Octet, 128=1, 64=1, 32=1, 16=1, 8=1, 4=1, 2=1, 1=1 255 = 11111111 Forth Octet = 0 11111111.11111111.11111111.00000000 Subnet mask Step 3: Calculate the subnets required 46 subnets required per instructions: Use the formula 2 to the power of X to find out how many bits to borrow from the subnet mask. 2^5= 32 and is insufficient to cover the subnets required so, 2^6 = 64 x is 6 we need 6 bits from last octet of the subnet mask to cover our subnets. I need 46 subnets but I have total 64 available so that leaves me with; 64-46 = 18 extra subnets to use at a later date.......

Words: 1170 - Pages: 5

Premium Essay


...IP Subnet Breakdown Overview: As part of your assigned readings and material covered in the class lecture you have been provided information about IP subnet breakdowns. For this assignment the students will answer questions related to IP subnet ID determination concepts and perform analysis and calculation for the scenarios provided. Chapter 18 in the textbook provides practice question and answers for this type of procedure. Be sure to review those questions and methods before completing this assignment. For each of the five questions, fill in the table for the IP subnets given IP address. Also, if the numbers of subnets is greater than eight, show the first seven and the last subnet. Be sure to show your work in the space provided or on separate pages. Questions are on the next pages. Questions: 1. IP Address: Octet | 1 | 2 | 3 | 4 | Mask | 255 | 255 | 255 | 128 | Magic Number | | | | 128 | Classful Network/Subnet Zero | 192 | 168 | 254 | 0 | First Nonzero Subnet | 192 | 168 | 254 | 128 | Next Subnet | | | | | Next Subnet | | | | | Next Subnet | | | | | Next Subnet | | | | | Next Subnet | | | | | Next Subnet | | | | | Next Subnet | | | | | Broadcast Subnet | 192 | 168 | 254 | 255 | Invalid—Used by Process | 192 | 168 | 254 | 256 | 2. IP Address: Octet | 1 | 2 | 3 | 4 | Mask | 255 | 255 | 255 | 192 | Magic Number | | | | 64 | Classful......

Words: 553 - Pages: 3

Premium Essay

Cyptography is located two miles away from the main headquarters and is in clear line of sight between the two offices. The third location is in New York, NY. It is imperative that NY be able to share files with the TX office. The NY office will also require the use of a web server so that its clients can download large media files quickly. IP Address Assignments Main Headquarters, Austin, TX For the Austin, TX site, since there are 500 hosts both wired and wireless, I would separate the IP assignments into 2 separate groups: approximately 250/250. To do this I would assign the IP assignments as follows: through for all the wired hosts and through for all wireless hosts. This location will also need a router. The subnet mask for these locations will be Rural Satellite Office, Austin, TX For the Rural Satellite Office site, since there are 200 hosts, I would apply the IP Assignment in one group. To do this I would assign the IP assignments as follows: through This location will also need a router. The subnet mask for these locations will be New York Office, New York, NY...

Words: 995 - Pages: 4

Premium Essay

Network Dessign

...interfaces Fa0/0 Fa0/1 Fa0/2 Fa0/3 Fa0/4 Fa0/5 Fa0/6 Fa0/7 and one serial interface Se0. 1 (and only one) Router/firewall with two 100Mbps Ethernet interfaces eth0 and eth1. Unlimited amounts of 100Mbit Manageable Fast Ethernet switches in the following sizes: 48 ports 24 ports 8 ports. Subnet/ address assignment Site A: - supports 256 addresses (254 usable) is bRouter address on this subnet ( interface fa0/0) is Router1 address on this subnet ( interface fa0/0) is a 8-port switch (Switch1) on this subnet is a 48-port switch (Switch2) on this subnet is a 48-port switch (Switch3) on this subnet is a 48-port switch (Switch4) on this subnet is a 48-port switch (Switch5) on this subnet All other IP’s are available for workstations Site B: - supports 128 addresses (126 usable) is Router2 address on this subnet (interface fa0/0) is Router3 address on this subnet (interface fa0/0) is a 8-port switch (Switch6) on this subnet...

Words: 865 - Pages: 4

Free Essay


...efficient replication topology. You use Active Directory Sites and Services to define sites and site links. A site is a set of well-connected subnets. Sites differ from domains; sites represent the physical structure of your network, while domains represent the logical structure of your organization. Using sites Sites help facilitate several activities within Active Directory, including: * Replication. Active Directory balances the need for up-to-date directory information with the need for bandwidth optimization by replicating information within a site more frequently than between sites. You can also configure the relative cost of connectivity between sites to further optimize replication. * Authentication. Site information helps make authentication faster and more efficient. When a client logs on to a domain, it first searches its local site for a domain controller to authenticate against. By establishing multiple sites, you can ensure that clients authenticate against domain controllers nearest to them, reducing authentication latency and keeping traffic off WAN connections. * Active Directory-enabled services. Active Directory-enabled services can leverage site and subnet information to enable clients to locate the nearest server providers more easily. For information about services, see Services. Defining sites using subnets In Active Directory, a site is a set of computers well-connected by a high-speed network, such as a local area network (LAN). All......

Words: 1735 - Pages: 7

Premium Essay

Deterining Subnet Configuration

...Running head: DETERMINING SUBNET CONFIGURATION Determining Subnet Configuration for Variety of Networks Alvin Miles AIU Online 09/20/2012 Determining Subnet Configuration for Variety of Networks In this final week IP assignment we are given some IP addresses and are ask several questions on anything from what is the broadcast address of this IP, what are the range of valid host IP addresses, to subnet ranges. Before we go too deep in trying to answer these questions I must first explain what classful routing protocol is as this will help explain some of my answers. In classful routing protocol all your networks will be using different classes and are separated only by a router (Lewis, 2011). Also classful routing protocol will only look at IP addresses and not the subnet mask. This is a problem as you can’t change the subnet mask in any of your network (Lewis, 2011). Most networks today use the classless routing protocol. This protocol supports VLSM and different sizes network within the same IP address class (Lewis, 2011). The first IP address we are given is, from this we are ask the question of what is the network address or network number? The network address would fall within the Class “A” and would give us The second question asks us to find out what the broadcast address of the IP address that has a subnet mask of To get the broadcast address we will need to find out how many subnets and hosts that......

Words: 1211 - Pages: 5

Premium Essay

Nt2640 Midterm

...response, followed by adding an IP header, and then adding a data link header and trailer is an example of what? Data Encapsulation  The term autonomous system (AS) refers to the collection of metrics for routes to a particular network. False Given the 5 bits of a subnet mask for the host portion of an IP addresses are available? 30 The interface type at the demark for a DS1/T1 circuit at is ____. RJ-48 Given the following routing table on a router, which next hop will the router select given the IP packet with the destination address of: Router 2 Which address below belongs to the Class A network range? Which of the following dynamic routing protocols is an exterior gateway protocol? BGP Out of the following which does a router normally use when making a decision about routing an IP packet? Destination IP Adress How many bits comprise the network portion of a Class C address? 24 A broadcast address is an address that only a single host listens to on the network. False How many usable host addresses are available in a Class C network? 254 Which protocol is responsible for resolving MAC addresses from IP addresses? ARP What is the broadcast address for the IP subnet mas Which is the well-known port number for DNS? 53 What is the CIDR(slash) notation equivalent to the dotted decimal of /30 Classful IP addressing____ Allows only the default...

Words: 791 - Pages: 4

Free Essay

Ipv6 Address Type

...readings and material covered in class lecture, you have learned about IPv6 address types, including unicast and multicast addresses. For this assignment, you will expand your knowledge of the use of multicast addresses compared to the use of broadcast addresses in IPv4. Required Resources:  Textbook and lecture notes  Internet access Research Resources: • IPv6 multicast address – overview o • IPv6 subnet scanning RFC o Deliverables  Perform additional research to understand the use of multicast addresses in IPv6 protocol compared to IPv4 broadcast addresses with emphasis on: o Neighbor discovery o All nodes address o All routers address  Describe the process of neighbor discovery including the use the all nodes address for achieving the same result as the IPv4 ARP protocol.  Include the IPv6 multicast address for all routers and all hosts.  Perform research to determine: o Are you able to perform subnet “scanning” by simple sending an ICMP echo packet to the “all hosts” multicast address? Similar to the concept of sending an ICMP echo packet to the broadcast address on an IPv4 subnet. o Provide an estimate of how long it would take to scan, through a tool similar to NMAP, an entire /64 IPv6 subnet to find every possible host, not using the multicast “all host” address. Use an Internet search engine to aid in this response. Provide......

Words: 883 - Pages: 4

Premium Essay

Subnetting Assistiance

...8 equal subnets using the following IP range: They have offices in 5 different locations: 1. New York with 17 workstations 2. Chicago with 15 workstations 3. Los Angeles with 20 workstations 4. Phoenix with 11 workstations 5. Boston with 22 6th site anticipated. NOTE: There are only 6 locations, requiring 6 subnets of EQUAL size. This does NOT mean you will use the entire /24 block of addresses. In other words, there WILL be enough space for 2 more subnets (8 equal subnets total) but we WILL NOT allocate the remaining space to sites. Simply document the beginning and ending address of the unused space for the final 10 points of the project. Here is what we know: /24 belongs to ACME 205.32.16.x = the CURRENT Network Portion (unusable address as it defines the network beginning) /24 means we have 256 total available addresses (explained below) is the Broadcast IP Resulting a USABLE IP RANGE OF – (254 usable hosts) /24 defines our subnet and the total addresses we CAN use. Let’s understand subnets… SUBNETS – Define the addresses we can USE /24 means we are using 24 of the 32 possible bits in the subnet mask. This can be determined by this: = 11111111.11111111.11111111.00000000 OR 8bits.8bits.8bits.0bits = 24 total bits out of 32 possible bits Each 1 in the subnet equals a bit and each octet is a field of potentially 8 bits Each placement of a bit indicates a......

Words: 1080 - Pages: 5

Premium Essay

It -220 Chapter 5 Page 187-191 Q and a 1-37 Odd.

...TCP/IP model?       i. Application – Defines the applications used to process requests and what ports and sockets are used.            I. (This layer is used to process requests from hosts and to make sure a connection is made to an appropriate port.)       ii. Transport – Defines the type of connection established between hosts and how acknowledgements are sent.       iii. Internet – Defines the protocols used for addressing and routing the data packets.       iv. Network Interface – Defines how the host connects to the network.  3. What are well known ports?        Also known as “reserve ports”, which are ports 1 – 1023 that are reserved by ICANN (Internet Corporation for Assigned Names and Numbers).             Port Number Assignments         Port Numbers          Description             1 - 1023          The “well known” ports         1024 – 49,151            Registered ports        49,152 – 65,535        Private Ports  5. Define the purpose of a connection oriented protocol. Give an example.       i. Establishes the network connection, manages the data transfer, and terminates the connection.            I. Connection Oriented Protocol – Establishes a network connection, manages the delivery of data, and terminates the connection.       ii. The TCP (Transport Control Protocol) protocol within the TCP/IP transport layer.            I. TCP protocol establishes a set of rules or guidelines for establishing the connection.  7. What is the purpose of......

Words: 891 - Pages: 4

Free Essay

Unit 2: Dhcp Troubleshooting

...Option name Meaning 1 Subnet mask Specifies the subnet mask of the client subnet. This option is defined in the DHCP Manager Create Scope or Scope Properties dialog box. It cannot be set directly in the DHCP Options dialog box. 3 Router Specifies a list of IP addresses for routers on the client's subnet. Multihomed computers can have only one list per computer, not one per network adapter. 6 DNS servers Specifies a list of IP addresses for DNS name servers available to the client. 15 Domain name Specifies the DNS domain name that the client should use for DNS computer name resolution. 44 WINS/NBNS servers Specifies a list of IP addresses for NetBIOS name servers (NBNS). 46 WINS/NBT node type Allows configurable NetBIOS over TCP/IP (NetBT) clients to be configured as described in RFC 1001/1002, where 1 = b-node, 2 = p-node, 4 = m-node, and 8 = h-node. On multihomed computers, the node type is assigned to the entire computer, not to individual network adapters. 47 NetBIOS scope ID 1 Specifies a text string that is the NetBIOS over TCP/IP scope ID for the client, as specified in RFC 1001/1002. 51 Lease time Specifies the time, in seconds, from address assignment until the client's lease on the address expires. Lease time is specified in the DHCP Manager Create Scope or Scope Properties dialog box, and can be set directly in the DHCP Options dialog box. 58 Renewal (T1) time value Specifies the time in seconds from address assignment until the client......

Words: 1115 - Pages: 5

Premium Essay

Nt2650.U5.Ws1.Ip Troubleshooting

...Verify layer-1 and layer-2 * Physical connectivity to the host to connected. Ethernet connection should indicate electrical connectivity with some type of LED indicator light. * Verify OS detecting network interface correctly by verifying drivers installed correctly and OS display the interface as “connected” * If you have access to switching infrastructure ensure that host is assigned to the proper VLAN with the correct interface switching type (access or trunk) * Verify layer-3 * Verify IP address assignment configuration with “ipconfig /all” command on MS Windows OSs * IP address and mask correctly assigned? * Default gateway; is the host on the same IP subnet as the default gateway? * Attempt to ping default gateway, * If successful host has layer-3 connectivity to directly connection network * If unsuccessful attempt to ping other host on directly connected IP subnet * If host is having issues with pinging hosts on directly connected network, verify ARP resolution by using the command ”arp –a” command. This command displays all the dynamic ARP resolutions. If no ARP entries present the host may have hidden layer-2 issues. * Verify IP connectivity to remote networks * Review IP default gateway and static routes * “ipconfig /all” for Windows hosts for default gateway * “netstat –rn” for Window host routing table * Unit 7......

Words: 1729 - Pages: 7

Premium Essay

Routing the Telephone to a Ne Neighborhood

...NT2640 MIDTERM EXAM: QUESTIONS NAME:_jordan Lewis________________________DATE:__07/29/14_______________ 1. How many usable host addresses are contained in a Class C network? (Assume default class mask.) a) 655356 b) 128 c) 512 d) 254 2. Which of the following describes a collision domain? a) The process of a bridge learning MAC addresses to be able to filter instead of flooding b) The separation of two IP subnets by a router c) Devices connected to an Ethernet hub d) Devices connected to an Ethernet switch operating in full duplex mode 3. Given the following routing table on a router, which next hop will the router select given the IP packet with the destination address of Address/Mask Next hop Interface 0 Interface 1 Router 1 default Router 2 a) Router 1 b) Router 2 c) Interface 0 d) Interface 1 4. Which of the following two protocols operate at the OSI Transport layer? a) IP and ARP b) TCP and UDP c) UDP and IP d) ARP and ICMP 5. The process of a DNS server adding a UDP header to the contents of a DNS query response, followed by adding an IP header, and then adding a data link header and trailer is an example of what? a) Adjacent layer interface b) Data encapsulation c) Same layer interaction d) Packet reordering 6. The term autonomous system (AS) defines the collection of metrics for routes to a particular network. a) True b) False 7. Given 5 bits of mask for the host......

Words: 1737 - Pages: 7

Premium Essay

Addressing Scenario

...In this Exercise, you will explain IP addres components, contrast classful and classless IP addressing, and explain the function of DNS and DHCP. Assignment Requirements Respond to the following scenario with design considerations and recommendations: You are a IT Administrator for a newly founded company and have been tasked with designing an IP addressing scheme and a plan for allocation and management of IP addresses. The company will currently have a single, physical location with approximately 145 hosts (computers, printers, etc.) IT plans should accommodate 50% growth within the next two years. At a minimum, address these specific questions, in addition to any other concerns/considerations. 1. What subnet range/s should be used 2. Should IP addresses be dynamically or statically assigned. 3. Should one or more network/subnets be used? 4. If DHCP is used, should a router,firewall or Windows Server be utilized and why? Respond in detail. justifying your recommendations. 1-2 pages I find that the IP address components as being the “core” of the IP addresses. Nothing would work without them. They are like the postal address of a home or office building. Every page you see on the internet has a (postal) IP address consisting of numbers such as Each number is a component of that IP address. When IPv4 was introduced, only the first octet was used for the network number and the remaining three octets were used for the host number. This limited......

Words: 763 - Pages: 4

Premium Essay

Simple Network Design

...Assignment IP Address Allocation for hosts Building A-2 subnets Building A-2 hosts International Office, College of Engineering and Science. Requiring a total of 7 subnets with 40 hosts per subnet See Attached Table for first 8 subnets Total range – 1st – Each subnet contains 60 useable IP Addresses. Building A-1 subnets Building A-1 hosts HR and Finance departments with 70 hosts each and a host total 140 Total range – Campus B subnets Campus B hosts the Training Centre. See Attached Table for first 100 subnets. Each subnet contains 125 usable IP Addresses. Total range – 50th – Campus C Subnets Campus C hosts 6 different Colleges with a further 10 disciplines. See attached Table for the full list of subnets Total address range is – 30th subnet – With 126 usable hosts Router Configuration Scripts Router Campus A-1 CampusA1> enab CampusA1# conf t CampusA1 (config) # int f0/0 CampusA1 (config-if) # no shut CampusA1 (config-if) # exi CampusA1 (config) # int f0/0.101 CampusA1 (config-subif) # encapsulation dot1Q 101 CampusA1 (config-subif) # ip address CampusA1 (config-subif) # exi CampusA1 (config) # int f0/0.102 CampusA1 (config-subif) # encapsulation dot1Q 102 CampusA1 (config-subif) # ip address...

Words: 1731 - Pages: 7