...FOR DEFENSE SPECIFICATIONS AMSC D7117 AREA SDMP DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. MIL-STD-961D FOREWORD 1. This standard is approved for use by all Departments and Agencies of the Department of Defense (DoD). 2. DoD 4120.3-M, “Defense Standardization Program Policies and Procedures,” discusses the different types of specifications used by the DoD. This standard establishes practices for developing performance and detail specifications prepared by or for the DoD. This standard covers the requirements for "standard" performance and detail specifications, meaning specifications that are used on multiple programs or applications. 3. It is DoD policy to give first preference to developing and using performance specifications. If it is not practical or effective to use a performance specification, a non-Government standard should be used. If it is not practical or effective to develop and use a performance specification or non-Government standard, a detail specification may be developed and used, but only as a last resort. 4. There are two primary objectives for the changes to this standard. First, for the DoD to meet its military needs in the current economic and political environment, it must increase access to an expanded industrial base that can meet defense needs at lower costs with state-of-the-art commercial technology. The changes herein will move the DoD to greater use of performance-based specifications and commercial-type...
Words: 33441 - Pages: 134
...|【网 址】 |http://www.360BaoGao.com/2014-02/2014_Market_Research_Report_on_Global_and_China_Smartphone_Industry/ | |【提 示】 |如需中文、日文等其他语言版本报告，请向客服咨询。 | "2014 Market Research Report on Global and China Smartphone Industry" was professional and depth research report on Global and China Smartphone industry. The report firstly introduced Smartphone basic information included Smartphone definition classification application industry chain structure industry overview; international market analysis, China domestic market analysis, Macroeconomic environment and economic situation analysis and influence, Smartphone industry policy and plan, Smartphone product specification, manufacturing process, product cost structure etc. then statistics Global and China key manufacturers Smartphone capacity...
Words: 1799 - Pages: 8
... | |【网 址】 |http://www.360BaoGao.com/2014-02/2014_Market_Research_Report_on_Global_and_China_Tire_Industry/ | |【提 示】 |如需中文、日文等其他语言版本报告，请向客服咨询。 | was professional and depth research report on Global and China Tire industry. The report firstly introduced Specialty Tire basic information included Tire definition classification application industry chain structure industry overview; international market analysis, China domestic market analysis, Macroeconomic environment and economic situation analysis and influence, Specialty Carbon Black industry policy and plan, Tire product specification, manufacturing process, product cost structure etc. then statistics Global and China key manufacturers Tire capacity production cost price profit...
Words: 1798 - Pages: 8
...Desktop 3rd Generation Intel® Core™ Processor Family Specification Update March 2014 Revision 017 Reference Number: 326766 By using this document, in addition to any agreements you have with Intel, you accept the terms set forth below. You may not use or facilitate the use of this document in connection with any infringement or other legal analysis concerning Intel products described herein. You agree to grant Intel a non-exclusive, royalty-free license to any patent claim thereafter drafted which includes subject matter disclosed herein. INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. A “Mission Critical Application” is any application in which failure of the Intel Product could result, directly or indirectly, in personal injury or death. SHOULD YOU PURCHASE OR USE INTEL'S PRODUCTS FOR ANY SUCH MISSION CRITICAL APPLICATION, YOU SHALL INDEMNIFY AND HOLD INTEL AND ITS SUBSIDIARIES, SUBCONTRACTORS AND AFFILIATES, AND THE DIRECTORS, OFFICERS...
Words: 20015 - Pages: 81
...various file formats such as Excel (.xls), database, (.dbf), and text (.txt). This article will explain, in a step-by-step format, how to import information from a text file, format the information for Access, and create the macro so each step will not need to be created every day. This will save you time and put some of the database operations into the hands of the end-users and freeing you to do other things. Prior to creating the macro, the creation and saving of the import specification will be explained. Importing from a text document (.txt) Prior to importing a text file, eliminate any spaces in front of the column headings. Usually, text file columns are separated by using semicolons. Ensure that there are no spaces between the semicolon and the column heading. By eliminating the spaces, you prevent importing errors and column heading issues so Access can recognize the headings. 1. Save then close the .txt file. 2. Next, go to "New" on the "Tables" tab. 3. Click on "Import table." 4. Change the "files of type" to Text Files. 5. Navigate to the text (.txt) file that you would like to import. 6. The "Import Text Wizard" dialog box will open. Select if your data is separated by characters such as commas, semicolons, etc. (Delimited) or if your data is aligned in columns with spaces between each field (Fixed width). If your information is not separated using semicolons, commas, etc., then select "Fixed width". When "Fixed width" is selected you...
Words: 916 - Pages: 4
...MUUNGANO GROUP FURNITURE MANEGEMENT SYSTEM SYSTEM ANALYST: Antony Njuguna INDEX NUMBER: 4011620005 PROJECT TITLE: MUUNGANO GROUP FURNITURE MANAGEMENT SYSTEM SUBJECT: COMPUTER PROJECT PAPER: 451/3 YEAR: 2015 DEDICATION I take this chance to bestow this project to my lovely parents, Mr. and Mrs. Festus; my fellow classmates as well, and most of all my computer teacher, Mr. Koech for the prop up and co-operation with guidance since the project started. MAY GOD BLESS YOU …..!!!!!!! AKNOWLEDGEMENT I am passing my sincere gratitude to all who have given me support through this busy period when I greatly needed it .I applaud the principal of Kahawa Garrison Secondary School, Mrs. Njagger and all the administration for providing all the necessary resources’. I cannot forget to entail my computer teacher, who guided me throughout this period of coming up with my project .I would like to pass my most ecstasy to the entire work force of carpenters in Kahawa Wendani for responding positively during the field research. CHAPTER ONE INTRODUCTION BACKGROUND INFORMATION Muungano group is a self-helpgroup made of school leavers. The aim of this group is to become self-reliant and attain financial independence by engaging in furniture making. It was realized that the number of temporary carpenters and customers are increasing due to increasing demand of furniture. This has led to increase...
Words: 1593 - Pages: 7
...ZXSDR BS8900A GU360 Outdoor GSM/UMTS Dual Mode Macro BTS Product Description ZTE CORPORATION No. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057 Tel: +86-755-26771900 Fax: +86-755-26770801 URL: http://ensupport.zte.com.cn E-mail: support@zte.com.cn LEGAL INFORMATION Copyright © 2013 ZTE CORPORATION. The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution of this document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPORATION is prohibited. contractual confidentiality obligations. All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATION or of their respective owners. This document is provided “as is”, and all express, implied, or statutory warranties, representations or conditions are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose, title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the use of or reliance on the information contained herein. ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications covering the subject matter of this document. Except as expressly provided in any written license between ZTE CORPORATION and its licensee, the user of this document shall not acquire any license to the subject...
Words: 6633 - Pages: 27
...to record the signals from accelerometer, laser vibrometer, strain gage and impulse hammer. It shows the wave shape of the electric signals in time voltage scale. This allows the measurement of, for example, peak-to-peak voltage of a waveform, the frequency of periodic signals, the time between pulses, the time taken for a signal to rise to full amplitude (rise time), and relative timing of several related signals. The specifications of the oscilloscope are in Table 4.1[1]. Figure 4.5 YOKOGAWA DLM2022 Oscilloscope Table 4.1 Specifications of YOKOGAWA DLM2022 Oscilloscope Name...
Words: 666 - Pages: 3
...these ideas are implemented in a computer system. The designer expresses the ideas in terms related to the application domain of the software. To implement these ideas, their description has to be interpreted in terms related to the execution domain. Semantic Gap Semantic Gap Application Domain Execution Domain Semantic Gap has many consequences Large development time Large development effort Poor quality of software Specification and Execution Gaps Specification Gap Application Domain Execution Gap PL Domain Execution Domain The software engineering steps aimed at the use of a PL can be grouped into Specification, design and coding steps PL implementation steps Specification and Execution Gaps Specification Gap It is the semantic gap between two specifications of the same task. Execution Gap It is the gap between the semantics of programs (that perform the same task) written in different programming languages. Language Processors “A language processor is a software which bridges a specification or execution gap”. The program form input to a language processor as the source program and to its output as the target program. The languages in which these programs are written are called source language and target language, respectively. Types of Language Processors A language translator bridges an execution gap to the machine language (or assembly language) of a computer system. E.g. Assembler, Compiler. A detranslator...
Words: 2285 - Pages: 10
...AWS A5.18/A5.18M:2005 An American National Standard Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding --`,,``,`-`-`,,`,,`,`,,`--- Copyright American Welding Society Provided by IHS under license with AWS No reproduction or networking permitted without license from IHS Not for Resale AWS A5.18/A5.18M:2005 An American National Standard Key Words —Carbon steel welding electrodes, carbon steel welding rods, gas metal arc welding, gas tungsten arc welding, metal cored electrodes, plasma arc welding, stranded electrodes Approved by American National Standards Institute June 9, 2005 Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding Supersedes AWS A5.18/A5.18M:2001 Prepared by AWS A5 Committee on Filler Metals and Allied Materials Under the Direction of AWS Technical Activities Committee Approved by AWS Board of Directors Abstract This specification prescribes the requirements for classification of solid carbon steel electrodes and rods, composite stranded carbon steel electrodes, and composite metal cored carbon steel electrodes for gas shielded arc welding. Classification is based on chemical composition of the electrode for solid electrodes and rods, chemical composition of weld metal for composite stranded and composite metal cored electrodes and the as-welded mechanical properties of the weld metal for each. Additional requirements are included for manufacture, sizes...
Words: 20552 - Pages: 83
...www.qyresearchreports.com Global and China Functional beverages Industry 2013 Market Research Report The report firstly introduced Functional beverages basic information included Functional beverages definition classification application industry chain structure industry overview; international market analysis, China domestic market analysis, Macroeconomic environment and economic situation analysis and influence, Functional beverages industry policy and plan, Functional beverages product specification, manufacturing process, product cost structure etc. then statistics Global and China key manufacturers Functional beverages capacity production cost price profit production value gross margin etc details information, at the same time, statistics these manufacturers Functional beverages products customers application capacity market position Activationontact information etc company related information, then collect all these manufacturers data and listed Global and China Functional beverages capacity production capacity market share production market share supply demand shortage import export consumption etc data statistics, and then introduced Global and China Functional beverages 2009-2013 capacity production price cost profit production value gross margin etc information. And also listed Functional beverages upstream raw materials equipments and down stream clients survey analysis and Functional beverages marketing channels industry development trend and proposals. In the...
Words: 1973 - Pages: 8
...is an example of ISO drawing. Figure 8: ISO 2.1.4 Process and instrumentation diagram (P&ID): In our center P&ID is done by process department then they send it to our department Piping department.P&ID is used by the piping department to develop and lay out the plot plan. Piping engineers are developing the plot plan, the arrangement of the equipment in the facility reflects, in part, the logical sequence of flow depicted on the flow diagram. Flow diagrams describe in a schematic drawing format the flow of fluids and gases through a unit or an entire plant. The flow diagram provides the piping designerwith an overall view of the operation of a facility. Fig4 is an example of P&ID. Figure 9: P&ID 2.1.5 Piping Material Specification...
Words: 2812 - Pages: 12
...FERSOFT ONLINE BUS TICKET RESERVATION SYSTEM (OBTRS) SRS Document Revision #: v1.0 Date of Issue: 15 January 2008 Project Manager: Seçil AYDIN Software Requirements Specification OBTRS Approval Signatures Approved by: Business Project Leader Approved by: IM/IT Project Leader Prepared by: Business Project Manager Prepared by: IM/IT Project Manager Reviewed by: Quality Assurance Manager v1.0 16/01/2008 Page i Software Requirements Specification OBTRS TABLE OF CONTENTS 1. INTRODUCTION .............................................................................................. 6 1.1 .. PURPOSE .................................................................................................................. 6 1.2 .. SCOPE ....................................................................................................................... 6 1.3 .. DEFINITIONS, ACRONYMS AND ABBREVIATIONS .................................................. 7 1.4 .. REFERENCES............................................................................................................ 8 1.5 .. OVERVIEW................................................................................................................. 9 2. OVERALL DESCRIPTION ............................................................................. 10 2.1 PRODUCT PERSPECTIVE ......................................................................................... 10 2.1.1 SYSTEM...
Words: 5433 - Pages: 22
...Table of Contents 1 Introduction 3 1.1 PURPOSE 3 1.2 Scope 3 1.3 Definitions, Acronyms and Abbreviations 3 1.4 References 3 1.5 Overview 3 2 Overall Description 4 2.1 USE-CASE MODEL 4 2.2 Assumptions and Dependencies 4 3 Specific Requirements 4 3.1 USE-CASE REPORTS 4 3.2 Supplementary Requirements 4 4 Supporting Information 4 REVISION HISTORY |Date |Version |Description |Author(s) | | | | | | | | | | | | | | | | Introduction [The introduction of the Software Requirements Specification (SRS) should provide an overview of the entire document. It should include the purpose, scope, definitions, acronyms, abbreviations, references, and overview of the Software Requirements Specification.] [Note: The Software Requirements Specification captures the complete software requirements for the system, or a portion of the system. The following document describes a typical Software Requirements Specification outline for a project using use-case modelling. This...
Words: 848 - Pages: 4
...CHAPTER 1 INTRODUCTION 1. Background When the word Hospital comes on our mind, the first thing we think about the queue that we have to pass away to get admitted on that hospital. Where every second means life of a person, waiting there for hours gives always a ridiculous feeling. Standing on that point, understanding the importance of time, we are planning to develop software for hospital management. Most of these facilities are today’s need of time. In this project an analysis has been made on the existing Hospital Management System. It is tried that the entire Hospital could be managed by within the system and users feel easy and comfortable to use the system. The system keeps a record of the patient, doctor and other staffs of the hospital management. The software also enables to update, delete the record and also provides the search facility. The system keeps information related to the persons who are willing to donate blood during emergency. 2. Objectives of Hospital Management System Main target is to provide reliable and efficient service to the members/nonmembers of the hospital who visited the hospital in search of it. 1. Patient registration. 2. Emergency Service. 3. Records Information about Hospital. 4. Blood Bank Maintenance. 5. Blood and Organ Donor Maintenance. 6. Doctor Consult. 7. Consultancy Record. 8. Staff Record Managements. 9. Patient Bill...
Words: 5841 - Pages: 24
