...Determining the right supply chain design involves a lot of quantitative data as well as some nonquantitative considerations. I would like to discuss this concept, as well as how to use mathematical optimization to sort through this quantitative data. A firm’s supply chain allows it to move product from the source to the final point of consumption. Leading firms around the world, from large retailers to high-tech electronics manufacturers, have learned to use their supply chain as a strategic weapon. A supply chain is defined by the suppliers, plants, warehouses, and flows of products from each product’s origin to the final customer. The number and locations of these facilities is a critical factor in the success of any supply chain. In fact, some experts suggest that 80% of the costs of the supply chain are locked in with the location of the facilities and the determination of optimal flows of product between them. (This is similar to the notion from manufacturing that you lock in 80% of the cost to make a product with its design.) The most successful companies recognize this and place significant emphasis on strategic planning by determining the best facility locations and product flows. The discipline used to determine the optimal location and size of facilities and the flow through the facilities is called supply chain network design. Sometimes it is referred to as network modeling because you need to build a mathematical model of the supply chain. This model is then solved...
Words: 516 - Pages: 3
...Supply Chain Network Analysis and Design: Location Analysis PROC 5820 7 May 2014 Summary The principal thesis of this paper is to discuss location analysis and its role in supply chain network analysis and design. The emphasis of site location is of strategic importance to all organizations seeking to maximize profits and minimize costs. The logistics/supply chain network design has six major planning steps in the process of designing a comprehensive logistics/supply chain network: The first step is to define the logistics/supply chain design process. The second step is to perform a logistics/supply chain audit. The third step is to examine the logistics/supply chain network alternatives. The fourth step is to conduct a facility location analysis, followed by the fifth step, which is to make decisions regarding network and facility location. The sixth and final step is to develop an implementation plan. Location analysis is also discussed in terms of the advantages and disadvantages of globalization and major location site factors. The discussion then describes the methods for evaluating major location site factors and making location decisions based on the evaluation. The paper concludes with discussing different modeling approaches and the need for comprehensive planning. (Reid and Sanders, 2010) (Coyle, J., Langley, C., Novak, R., Gibson, B. 2013) Introduction As stated by Jeff Karrenbauer...
Words: 3038 - Pages: 13
...Praise for Supply Chain Network Design “Due to the significant impact that supply chain design has on the cost and service provided by a company, it is critical that managers be knowledgeable about how to optimize the flow of products and goods within their supply chain. This book takes a very technical subject and makes it possible for managers and students alike to understand all aspects of network design. The practical approach used in discussing topics throughout the book provides a clear and excellent framework for those seeking to learn more about the topic. The book is a needed and welcome contribution to the profession.” —Dr. Mary C. Holcomb, Associate Professor of Logistics, Department of Marketing and Supply Chain Management, College of Business Administration, University of Tennessee “Supply chain management (SCM) is a rapidly growing area of study—and network design is one of the fastest growing areas within SCM. This book would make a great classroom textbook. It is easy to follow with clear examples and useful exercises. It is laid out in progressive layers, with one’s understanding of the subject matter building as you go. You can stop midway and be comfortable with the fundamentals, or you can go as deep as desired into Supply Chain Network Design. “I have been a long-time practitioner of network modeling, as a manager in business and as a consultant, and I have covered the topic in university lectures; I still learned a great deal about a subject I thought I...
Words: 15552 - Pages: 63
...ADVANTAGE TECHNOLOGY NETWORKS PRACTICE PROCESS BALANCE PERFORMANCE SUPPLY CHAIN SUPPLY CHAIN THE &THE VS. HYPE REALITY 46 SUPPLY CHAIN MANAGEMENT REVIEW · SEPTEMBER/OCTOBER 2001 www.scmr.com The conventional wisdom is that competition in the future will not be company vs. company but supply chain vs. supply chain. But the reality is that instances of head-to-head supply chain competition will be limited. The more likely scenario will find companies competing— and winning—based on the capabilities they can assemble across their supply networks. By James B. Rice, Jr. and Richard M. Hoppe A n increasingly vocal and popular sentiment holds that the nature of competition in the future will not be between companies but rather between supply chains. If this does, in fact, represent the future, how will these chains actually compete against each other? And what can practitioners do now in anticipation of this future? In contemplating the much-ballyhooed supply chain vs. supply chain (SC vs. SC) proposition, we first sought examples of this competition in action. Yet for as many examples of SC vs. SC competition that we found, there were at least as many places where the model didn’t fit. On the one hand, we saw vivid examples where one company or a series of companies had designed supply networks to act with singular focus against other unique companies or groups of companies—for example, Brax, Perdue Farms, and Tyson Foods. Yet more...
Words: 5310 - Pages: 22
...Logistics and Supply chain management: Ronald H. Ballou Chen Wang University of Windsor ELIP 3 Section 7 Instructor: Mary Wheeler Introduction: Background information Logistics and supply chain management, as a vital business activity, to some extent, has became a new core of business management today, compared with traditional fields such as finance, marketing, and production. Being a theoretical expert and practical leader in the field, Ronald H. Ballou, who is the professor of Weatherhead School of Management, Case Western Reserve University, has been standing at the top level in modern logistics’ research and application. In academic research, he published more than 50 articles in professional logistics journals and teaching materials he wrote has been using in relative teaching fields. In application area, he is a welcomed consultant to many companies on logistics issues. He is the model of theory- practice bond in the fields. Issue identification It is obvious that there are various components of a typical logistics system, such as inventory control, material handling, plant and warehouse site selection, packaging, traffic and transportation, etc.. Song (2007, p. 11) states that whether these procedures can be reasonably and exactly designed is the key to companies cutting down their costs and creating more value. In simpler words, it refers to reducing redundant spaces and wasteful time. Upon this, Ronald H. Ballou developed the computer software ‘NETWORK’ for locating...
Words: 1317 - Pages: 6
...Defining value chain architectures: Linking strategic value creation to operational supply chain design Matthias Holweg a, Petri Helo b,n a b Judge Business School, University of Cambridge, UK Department of Production, Faculty of Technology, University of Vaasa, Finland art ic l e i nf o Article history: Received 31 May 2012 Accepted 13 June 2013 Available online 28 June 2013 Keywords: Value chain Supply chain management Operations strategy a b s t r a c t Over the past three decades scholars have developed comprehensive insights into the operational and strategic aspect of designing and managing the supply chain. Reviewing this ample body of knowledge however one cannot help but notice a persistent disunion between the “value chain” view that considers aspects of value creation and appropriation, and the operational “supply chain” view that considers strategies and tools for designing and operating efficient inter-firm networks. Commonly these views do not interact: value creation has the aim of capturing the maximum value-added in financial terms, the supply chain view aims for designing operationally efficient supply chains. In contrast to their treatise within the academic literature, from a practical point of view these two aspects are both necessary (and thus in their own right insufficient) components to a firm's supply chain strategy. In this paper we thus turn to an exploratory case study to identify what such a combined view of the value and supply chain would entail...
Words: 8254 - Pages: 34
...channel is a set ofintermediary companies, people or agents who manage the movement of products and services from the manufacturer to the final user. All firms which take title to the product, or assist in transferring title as it moves from manufacturer toconsumer form part of thedistribution channel. A marketing channel aims to provide acompetitive advantage to the organization. It is related to supply chain management as both are involved in supplying a service or a product to the end users. Both are involved inpartnerships that are developed between organizations performing adjacent, linear steps in the chain. The supply chain or the marketing channel is viewed as a whole rather than a set of fragmented parts in order that activities, the basic units of competitive advantage, can be configured, confined and performed in different ways torival chains (Bradley, 2003). This paper will discuss the logistics, marketing channel and supply chain of an International clothing company – Zara. The company was chosen because of its unique and innovative distribution channel andsupply chain management. Company Background In 1963, Amancio Ortega started a small company in Spain that manufactured women’s pajamas and lingerie products for garment wholesalers. In 1975, after aGerman customer cancelled a sizable order, the firm opened its forts Zara...
Words: 2243 - Pages: 9
...Table of Contents Introduction 2 Objectives of the report 2 Methodology 2 Scope 2 Comparative Performance analysis of Delivery Network Designs 3 Factors Influencing Distribution Network Design 3 Design Options for a Distribution Network 4 Comparative performance analysis among six distribution networks 7 Response time 7 Product variety 8 Product availability 8 Customer experience 9 Order visibility 9 Returnability 10 Inventories 10 Transportation 11 Facilities and handling 11 Information 12 Conclusion 13 References 14 Introduction Distribution refers to the steps taken to move and store a product from supplier stage to a customer stage in the supply chain. Distribution is the key driver of the overall profitability of a firm because it affects both the supply chain cost and the customer experience directly. To meet the customer need properly every supply chain manager should have deep knowledge about supply chain distribution network. Supply chain manager should know the strength and weakness of all distribution networks to achieve strategic and increase supply chain profit. The report entitled “Comparative Performance analysis of Delivery Network Designs” originated from the partial fulfillment of the supply chain management course. The main purpose of the preparation of the report is due to the partial fulfillment of the course of the EMBA Program conducted by the Faculty of Business Studies, Dhaka University...
Words: 2698 - Pages: 11
...INSTITUTE OF BUSINESS MANAGEMENT STUDIES Term End Examination/ Supply Chain Management. All Questions are compulsory. Total Marks : 100. Q.1 Consider the supply chain involved when a customer order a book from Amazon. A. Identify the push/pull boundary & two process each in the push & pull Process? Answer : In Amazon’s original operations design the push/pull boundary existed betwixt the retailer (Amazon) and their distributor. Amazon ordered product from the distributor and the customer order arrived. Today, Amazon has six warehouses where it stocks an inventory of items it is confident that will sell. In this scenario, the push/pull boundary exists between the customer and the retailer. All supply chain processes can be broken down into four process cycles that connect the five stages of the supply chain; the customer order cycle, the replenishment cycle, the manufacturing cycle, and the procurement cycle. The customer order cycle connects the customer with the retailer; this connection is made as the book, perhaps Supply Chain Management, is selected and paid for by the customer. Processes in the pull phase are the order fulfillment, shipping, customer returns, and customer billing. Processes in the push phase are production, stock replenishments, shipping, and payment. B. How do you characterize the competitive strategy of high end dept. store chain Such as Nordstrom? What are the key customer needs that Nordstrom aims...
Words: 1850 - Pages: 8
...3 Assignment 2 Simulation Models For Supply Chain Design By, Toney Randle November 14, 2011 B6110 XA Supply Chain Optimization and Outsourcing For Professor Judith Blando Argosy University Atlanta How good is Simulation Software? In the Real World Sounds like talk of some blockbuster movie like the Matrix or something. Looking a little deeper, there appears to be a sort of familiarity of flavors when one really looks deeper into the goings on with software when it is introduced in to a real world challenge. Can simulation software predict and create the perfect world for supply chain managers. Can the technology really live up to the hype? Some would say the technology is groundbreaking and has not yet reached its full potential. So, who is using the stuff? Is it making a difference in the real world? Let’s find out. There happens to be a product that’s a hit in the supply chain software market and some say its living up to the supply chain management hype. Software mogul, LLamasoft is reporting, “LLamasoft is a proven leader in supply chain modeling and analytics software. Every year, companies save millions of dollars and significantly improve their supply chain service levels using LLamasoft products and expert support services (Supply Chain Designer has a new leader, 2011).” The proclamation has been made. On top of that, the company boasts of the latest product, “Supply Chain Guru has achieved certified integration with SAP...
Words: 618 - Pages: 3
...After reviewing all of the requirements of Investor Group A as well as multiple supply chain strategies it is recommended that a Keiretsu network is implemented. By employing the Keiretsu network strategy the group of investors not only owns the production facility but also have the opportunity to invest in and/or own suppliers to ensure the lowest costs. The Keiretsu network is the best choice for Investor group A because it is part collaboration part purchasing from a few suppliers and part vertical integration. It combines the benefits of using few suppliers such as suppliers having a large commitment to the buyer and more likely to have a better understanding of the broad objectives of the manufacturer and the end consumer. The Keiretsu network provides an assured price structure, predictable inventory and delivery schedules as well as clear quality and performance standards. A stable environment such as this close cooperation between the supplier and the manufacturer can lead to quality improvements, continual product development and reductions in cost. As stated before vertical integration is a component of the keiretsu network, with vertical integration the manufacturer has the ability to produce supplies that were previously purchased or to actually buy a supplier. Advantages of this would be inventory reduction and scheduling, cost reductions, and adherence to quality standards. The strategy of using many suppliers and playing them against one another is a strategy...
Words: 2205 - Pages: 9
...Course Title : Supply Chain Management Course Code : BUS 306 Year of Study : 3 Number of Credits : 3 credits Duration in Weeks : 15 weeks Contact Hours Per Week : Lecture (2.0 hours) Tutorial (1.0 hour) Pre-requisite Course(s) : Nil Course Aims This course aims to provide students with a clear, well-structured and comprehensive understanding of basic concepts and principles of supply chain management. The course will highlight the very important role of supply chain management in creating customer values, and how it plays in today’s global business world. Besides, this course also presents the strategic context in which supply chain managers work. Teaching Approach Both lectures and tutorials will be used. Lectures are designed to introduce the topics and develop students’ understanding of the materials. Tutorials are designed to consolidate what students have learned in the lecture and help them to apply the theories in relevant situations. Participation of students will be vital to the learning process. Current issues in the business fields related to supply chain management will be used extensively to illustrate the practical aspects of the course. Resources Principal Reading 1. Chopra S. & Meindl P., Supply Chain Management – Strategy, Planning, and Operation, Fourth Edition, New Jersey: Pearson Education, 2010. Supplementary Reading: 1. Bozarth, C. & Hanfield, R., Introduction to Operations and Supply Chain Management,...
Words: 853 - Pages: 4
...resistant tuberculosis drugs supply chain network design and performance measures at health facilities of Jimma town, southwest Ethiopia By: Alula Tadesse, SintayehuTarekegn&TadesseGudeta A term paper to be submitted to Dr.TemesgenGaroma (PhD) for partial fulfillment of advanced logistics and supply chain management course April, 2015 Jimma, Ethiopia Jimma University College of Health Sciences Department of Pharmacy Assessment of multidrug resistant tuberculosis drugs supply chain network design and performance measures at health facilities of Jimma town, southwest Ethiopia By: Alula Tadesse, SintayehuTarekegn&TadesseGudeta Advisor:-Dr.TemesgenGaroma (PhD) April, 2015 Jimma, Ethiopia ABSTRACT BACKGROUND: In all supply chains, correct logistics management optimizes the circulation of products and materials, and insures the link between flow of the physical items and the follow of information. It takes a holistic approach to company’s activities, as well as to the lifecycle of a given product, from its conception to its disposal. This system also has a great impact on the sustained availability of medicines including antiretroviral drugs where their absences resultin service interruption and loss of customer confidence on the institution. For this purpose an effective supply chain network and performance measures needs to be established. OBJECTIVE:-The objective of this study was to assess the supply chain network and performance measures of...
Words: 2515 - Pages: 11
...read on this topic. The Supply Chain is the sequence of suppliers that contribute to the creation and delivery of a good or service to end customers, meanwhile Supply Chain Management is organizing the cost effective flow and storage of materials, in-process inventory, finished goods and related information from point of origin to point of consumption to satisfy customer requirements. A major element of the supply chain is the use of logistics which is the management of the storage and flow of goods, services and information throughout your organisation. Logistics can be broken down into three major elements, Firstly, materials management which is the sourcing and receiving of raw materials or unfinished products for subsequent use. Secondly, material flow system which can be defined as the ability to locate and schedule material through to end production and disposition, and finally the physical distribution which is the delivery of finished goods to customers. The main aim of a supply chain management is to evolve a company’s supply chain into an optimally efficient, customer-satisfying process, where the effectiveness of the whole supply chain is more important than the effectiveness of each individual department. As stated before it is more important to focus on the supply chain management process rather than individual departments, these processes compiles of product design, planning, order management and stock management. When taking supply change management into account...
Words: 1718 - Pages: 7
...2 Value Chain Management The theoretical background is defined around the central term value chain. Chapter 2 presents research concepts to manage the value chain structured by their area of specialization either on supply, demand or values. Secondly, within an integrated framework, the results of the specialized disciplines are combined with the objective to manage sales and supply by values and volume. Value chain management is defined and positioned with respect to other authors’ definitions. A value chain management framework is established with a strategy process on the strategic level, a planning process on the tactical level and operations processes on the operational level. These management levels are detailed and interfaces between the levels are defined. Since the considered problem is a planning problem, the framework serves for structuring planning requirements as well as the model development in the following chapters. 2.1 Value Chain Value chain as a term was created by Porter (1985), pp. 33-40. A value chain “disaggregates a firm into its strategically relevant activities in order to understand the behavior of costs and the existing and potential sources of differentiation”. Porter’s value chain consists of a “set of activities that are performed to design, produce and market, deliver and support its product”. Porter distinguishes between • primary activities: inbound logistics, operations, outbound logistics, marketing and sales, service in the core value...
Words: 16329 - Pages: 66
